| /linux-2.4.37.9/Documentation/cdrom/ |
| D | 00-INDEX | 8 - LaTeX document on standardizing the CD-ROM programming interface.
10 - info on the Sony CDU31A/CDU33A CD-ROM driver.
12 - info on the Philips/LMS cm206/cm260 CD-ROM driver.
14 - info on the Goldstar R420 CD-ROM driver.
18 - info on the CD-ROM interface on ISP16, MAD16 or Mozart sound card.
20 - info on limitations of standard Mitsumi CD-ROM driver.
22 - info on improved Mitsumi CD-ROM driver.
24 - info on the Optics Storage 8000 AT CD-ROM driver
26 - info on the SoundBlaster/Panasonic CD-ROM interface driver.
28 - info on the SANYO CDR-H94A CD-ROM interface driver.
[all …]
|
| D | aztcd | 4 AZTECH CD-ROM CDA268-01A, ORCHID CD-3110,
6 CD-ROM Drives
10 NOTE: THIS DRIVER WILL WORK WITH THE CD-ROM DRIVES LISTED, WHICH HAVE
13 IT WILL DEFINITELY NOT WORK WITH CD-ROM DRIVES WITH *IDE*-INTERFACE,
16 under certain conditions, see 7.). IF YOU'RE USING A CD-ROM DRIVE
61 in directory /dev. To mount a CD-ROM, your kernel needs to have the ISO9660-
73 Aztech CD-ROM Init: DriverVersion=<version number> BaseAddress=<baseaddress>
74 Aztech CD-ROM Init: FirmwareVersion=<firmware version id of your I/O-card>>>
75 Aztech CD-ROM Init: <drive type> detected
76 Aztech CD-ROM Init: End
[all …]
|
| /linux-2.4.37.9/drivers/char/rio/ |
| D | rom.h | 46 typedef struct ROM ROM ; typedef
47 struct ROM { struct
58 #define HOST_ROM (ROM *) 0x7c00 argument
59 #define RTA_ROM (ROM *) 0x7801
|
| /linux-2.4.37.9/Documentation/ |
| D | devices.txt | 195 block First MFM, RLL and IDE hard disk/CD-ROM interface
196 0 = /dev/hda Master: whole disk (or CD-ROM)
197 64 = /dev/hdb Slave: whole disk (or CD-ROM)
430 block SCSI CD-ROM devices
431 0 = /dev/sr0 First SCSI CD-ROM
432 1 = /dev/sr1 Second SCSI CD-ROM
451 block MSCDEX CD-ROM callback support {2.6}
452 0 = /dev/dos_cd0 First MSCDEX CD-ROM
453 1 = /dev/dos_cd1 Second MSCDEX CD-ROM
510 block Sony CDU-31A/CDU-33A CD-ROM
[all …]
|
| D | paride.txt | 10 CD-ROM, LS-120 and tape drives use the parallel port to connect to their
27 were to open up a parallel port CD-ROM drive, for instance, one would
28 find a standard ATAPI CD-ROM drive, a power supply, and a single adapter
30 IDE cable. It is usually possible to exchange the CD-ROM device with
38 MicroSolutions backpack CD-ROM
59 pcd ATAPI CD-ROM
110 MicroSolutions CD-ROM pcd bpck
118 FreeCom CD-ROM pcd frpw
212 For example, if you had two no-name CD-ROM drives both using the
274 like any other Linux device. For example, to mount a CD-ROM in pcd0, use:
|
| D | README.nsp_cs.eng | 16 SCSI device: I-O data CDPS-PX24 (CD-ROM drive)
117 your SCSI device name(hard drive, CD-ROM, etc...)
|
| D | nfsroot.txt | 188 3.4) Using a boot ROM
190 client. With a boot ROM the kernel gets loaded using the TFTP
193 free implementations of a boot ROM available on sunsite.unc.edu
|
| /linux-2.4.37.9/drivers/mtd/chips/ |
| D | Config.in | 7 comment 'RAM/ROM/Flash chip drivers'
50 dep_tristate ' Support for ROM chips in bus mapping' CONFIG_MTD_ROM $CONFIG_MTD
|
| /linux-2.4.37.9/arch/mips/lasat/image/ |
| D | romscript.normal | 10 /* Data in ROM */
|
| /linux-2.4.37.9/Documentation/networking/ |
| D | arcnet-hardware.txt | 580 | |oo| ROM | 90C63 | r |___| 1
598 ROM ROM Enable Select
646 Switch | Hex RAM | Hex ROM
689 *) To enable the 8K Boot PROM install the jumper ROM.
690 The default is jumper ROM not installed.
987 labelled) the same as on the PC270, from top to bottom: EXT2, EXT1, ROM,
1037 JP2: Boot-ROM enabled if closed
1040 U3: Boot-ROM Socket
1070 DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
1072 Switches RAM ROM
[all …]
|
| D | ax25.txt | 5 For more information about the AX.25, NET/ROM and ROSE protocol stacks, see
|
| D | depca.txt | 16 DBR ROM on on dc000 dffff
|
| /linux-2.4.37.9/drivers/mtd/maps/ |
| D | Config.in | 35 … dep_tristate ' ROM connected to AMD76X southbridge' CONFIG_MTD_AMD76XROM $CONFIG_MTD_GEN_PROBE
36 … dep_tristate ' ROM connected to Intel Hub Controller 2' CONFIG_MTD_ICH2ROM $CONFIG_MTD_JEDECPROBE
96 …dep_tristate ' Generic uClinux RAM/ROM filesystem support' CONFIG_MTD_UCLINUX $CONFIG_MTD_PARTITI…
|
| /linux-2.4.37.9/Documentation/powerpc/ |
| D | SBC8260_memory_mapping.txt | 12 Tasks that need to be perform by the boot ROM before control is
21 - The boot ROM should only clear the RAM that it is using.
28 - To enhance boot ROM performance, the I-cache can be enabled.
39 directly from ROM, rather than having to copy it to RAM.
46 ROM or FLASH memory address >= 0x00500000 (above 5 MB), or
|
| /linux-2.4.37.9/Documentation/sound/ |
| D | CMI8338 | 75 CD-ROM or DVD-ROM.
|
| D | NM256 | 41 Now try playing a wav file, futz with the CD-ROM if you have one, etc.
68 microphone, the CD-ROM input, and the volume device (which corresponds
70 models of laptops.) The Z505 series does not have a builtin CD-ROM,
71 so of course the CD-ROM input doesn't work. It does work on laptops
72 with a builtin CD-ROM drive.
94 * There are reports that the CD-ROM volume is very low. Since I do not
95 have a CD-ROM equipped laptop, I cannot test this (it's kinda hard to
|
| /linux-2.4.37.9/Documentation/arm/SA1100/ |
| D | LART | 5 applications. It has 32 MB DRAM, 4MB Flash ROM, double RS232 and all
|
| /linux-2.4.37.9/net/ax25/ |
| D | Config.in | 20 dep_tristate ' Amateur Radio NET/ROM protocol' CONFIG_NETROM $CONFIG_AX25
|
| /linux-2.4.37.9/drivers/scsi/ |
| D | README.AM53C974 | 173 1 x Toshiba XM-3301B CD-ROM (external, rate=5MHz, async.)
178 - Compaq/Matsushita CD-ROM:
181 negotiation with the CD-ROM, i.e. simply don't specify comm. parameters
183 The driver will thus use its default for the CD-ROM, which is 5MHz
|
| /linux-2.4.37.9/arch/m68k/q40/ |
| D | README | 81 keyboard interface, 1 Programmable LED, 2x8bit DACs and up to 1MB ROM, 1MB
82 shadow ROM.
135 - AT codes as displayed by the q40 debugging ROM
|
| /linux-2.4.37.9/Documentation/parisc/ |
| D | IODC.txt | 17 The ROM layout is generally icky (only one byte out of every 4-byte-word
22 Now, let's have a look at what the cooked ROM looks like (see iodc.pdf for
|
| /linux-2.4.37.9/arch/cris/boot/compressed/ |
| D | README | 10 Those files together with a ROM filesystem can be catted together and
|
| /linux-2.4.37.9/Documentation/filesystems/devfs/ |
| D | ToDo | 25 - Parallel port ATAPI CD-ROM (drivers/block/paride/pcd.c)
|
| /linux-2.4.37.9/arch/cris/boot/rescue/ |
| D | head.S | 75 ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
79 ;; ROM loads, so the same host loader can be used to load a rescued
|
| /linux-2.4.37.9/fs/ |
| D | Config.in | 53 tristate 'Compressed ROM file system support' CONFIG_CRAMFS
92 tristate 'ROM file system support' CONFIG_ROMFS_FS
|