Lines Matching refs:ROM
580 | |oo| ROM | 90C63 | r |___| 1
598 ROM ROM Enable Select
646 Switch | Hex RAM | Hex ROM
689 *) To enable the 8K Boot PROM install the jumper ROM.
690 The default is jumper ROM not installed.
987 labelled) the same as on the PC270, from top to bottom: EXT2, EXT1, ROM,
1037 JP2: Boot-ROM enabled if closed
1040 U3: Boot-ROM Socket
1070 DIP Switches 1-5 of SW2 encode the RAM and ROM Address Range:
1072 Switches RAM ROM
1319 JP1 ROM Enable Select
1402 Switch | Hex RAM | Hex ROM
1414 *) To enable the Boot ROM install the jumper JP1
1612 Switch | Hex RAM | Hex ROM
1766 | _____ | ROM | | UFS | |
1800 J6-J21 Unknown (Probably extra timeouts & ROM enable ...)
1804 ROM Boot ROM socket
1895 jumpers and maybe one of J18-J21 selects ROM. Also J6-J10 and
1944 8 : ROM Enable
2001 Switch | Hex RAM | Hex ROM
2013 *) To enable the Boot ROM set the switch 8 of switch block SW3 to position ON.
2063 ||o| ROM ENABLE | SMC | _________ |
2083 J2 ROM Enable
2141 Switch | Hex RAM | Hex ROM
2153 *) To enable the Boot ROM short the jumper J2.
2427 ROM ROM Enable Select
2504 Switch | Hex RAM | Hex ROM
2547 *) To enable the 8K Boot PROM install the jumper ROM.
2548 The default is jumper ROM not installed.
2693 Switch | Hex RAM | Hex ROM
2793 8 : ROM Enable
2873 Switch | Hex RAM | Hex ROM
2885 *) To enable the Boot ROM set the jumper 8 of jumper block SW3 to position ON.
2955 8: ROM ENABLE
2963 SW1: Timeouts, Interrupt and ROM
2974 To enable the 8K Boot PROM position SW1 switch 8 on (UP) labeled ROM.
2975 The default is jumper ROM not installed.
2998 Setting the Base Memory Address (RAM & ROM)
3007 Switch| Hex RAM | Hex ROM
3077 ! ROM 7654321 <- I/O -------
3091 Top Jumper line Bit 7 = ROM Enable 654=Memory location 321=I/O