Lines Matching refs:ROM

4 	     AZTECH CD-ROM CDA268-01A, ORCHID CD-3110,
6                            CD-ROM Drives 
10 NOTE: THIS DRIVER WILL WORK WITH THE CD-ROM DRIVES LISTED, WHICH HAVE
13       IT WILL DEFINITELY NOT WORK WITH CD-ROM DRIVES WITH *IDE*-INTERFACE,
16       under certain conditions, see 7.). IF YOU'RE USING A CD-ROM DRIVE
61 in directory /dev. To mount a CD-ROM, your kernel needs to have the ISO9660-
73     Aztech CD-ROM Init: DriverVersion=<version number> BaseAddress=<baseaddress>
74     Aztech CD-ROM Init: FirmwareVersion=<firmware version id of your I/O-card>>>
75     Aztech CD-ROM Init: <drive type> detected
76     Aztech CD-ROM Init: End
79 CD-ROM drive at the base address specified in aztcd.h at compile time. This 
83 message of your CD-ROM's DOS driver. If that still does not help, use boot
98 you try to mount the CD-ROM drive, you have to recompile your kernel.
136     Aztech CD-ROM Init: DriverVersion=<version number> BaseAddress=<baseaddress>
137     Aztech CD-ROM Init: FirmwareVersion=<firmware version id of your I/O-card>
138     Aztech CD-ROM Init: <drive type> detected
139     Aztech CD-ROM Init: End
241 5.3 DOSEMU's CD-ROM SUPPORT
244 Linux, when a CD-ROM is accessed under dosemu. This problem has partly been
246 might hang for some 30sec. So be patient, when using dosemu's CD-ROM support
249 CD-ROM driver. The new version came with dosemu-0.60.2, see dosemu's
257 Please include a description of your CD-ROM drive type and interface card, 
269 CD-ROMs to the volunteers, who provided the CD-ROM support for Linux. My
319 -insert a CD-ROM and close the tray
322  driver for the CD-ROM drive is not loaded (comment out the calling lines 
329 -if you get an 'Aztech CD-ROM init: aborted' message, read the remarks about
333 -start DOS before; make now sure, that the DOS driver for the CD-ROM is 
377  sense in the context where they appear. With a CD-ROM inserted the status 
379  audio disk, insert no disk or reinsert the CD-ROM and check, if the status
394  the CD-ROM drive is ready, when aztcd_init is trying to read the version
396  detected by looking, if AFL_OP_OK can be read correctly. If the CD-ROM drive 
447 was compiled with gcc.2.5.8. My CD-ROM drive is an Aztech CDA268-01A. My
462 great job in analyzing the command structure of various CD-ROM drives, this
465 questions in the newsgroups. He really is *the* Linux CD-ROM guru. Thanks 
543 AZTECH.CDROM-driver, but it should work with every CD-ROM drive. Before