1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * NAND flash simulator.
4 *
5 * Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org>
6 *
7 * Copyright (C) 2004 Nokia Corporation
8 *
9 * Note: NS means "NAND Simulator".
10 * Note: Input means input TO flash chip, output means output FROM chip.
11 */
12
13 #define pr_fmt(fmt) "[nandsim]" fmt
14
15 #include <linux/init.h>
16 #include <linux/types.h>
17 #include <linux/module.h>
18 #include <linux/moduleparam.h>
19 #include <linux/vmalloc.h>
20 #include <linux/math64.h>
21 #include <linux/slab.h>
22 #include <linux/errno.h>
23 #include <linux/string.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/rawnand.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/delay.h>
28 #include <linux/list.h>
29 #include <linux/random.h>
30 #include <linux/sched.h>
31 #include <linux/sched/mm.h>
32 #include <linux/fs.h>
33 #include <linux/pagemap.h>
34 #include <linux/seq_file.h>
35 #include <linux/debugfs.h>
36
37 /* Default simulator parameters values */
38 #if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
39 !defined(CONFIG_NANDSIM_SECOND_ID_BYTE) || \
40 !defined(CONFIG_NANDSIM_THIRD_ID_BYTE) || \
41 !defined(CONFIG_NANDSIM_FOURTH_ID_BYTE)
42 #define CONFIG_NANDSIM_FIRST_ID_BYTE 0x98
43 #define CONFIG_NANDSIM_SECOND_ID_BYTE 0x39
44 #define CONFIG_NANDSIM_THIRD_ID_BYTE 0xFF /* No byte */
45 #define CONFIG_NANDSIM_FOURTH_ID_BYTE 0xFF /* No byte */
46 #endif
47
48 #ifndef CONFIG_NANDSIM_ACCESS_DELAY
49 #define CONFIG_NANDSIM_ACCESS_DELAY 25
50 #endif
51 #ifndef CONFIG_NANDSIM_PROGRAMM_DELAY
52 #define CONFIG_NANDSIM_PROGRAMM_DELAY 200
53 #endif
54 #ifndef CONFIG_NANDSIM_ERASE_DELAY
55 #define CONFIG_NANDSIM_ERASE_DELAY 2
56 #endif
57 #ifndef CONFIG_NANDSIM_OUTPUT_CYCLE
58 #define CONFIG_NANDSIM_OUTPUT_CYCLE 40
59 #endif
60 #ifndef CONFIG_NANDSIM_INPUT_CYCLE
61 #define CONFIG_NANDSIM_INPUT_CYCLE 50
62 #endif
63 #ifndef CONFIG_NANDSIM_BUS_WIDTH
64 #define CONFIG_NANDSIM_BUS_WIDTH 8
65 #endif
66 #ifndef CONFIG_NANDSIM_DO_DELAYS
67 #define CONFIG_NANDSIM_DO_DELAYS 0
68 #endif
69 #ifndef CONFIG_NANDSIM_LOG
70 #define CONFIG_NANDSIM_LOG 0
71 #endif
72 #ifndef CONFIG_NANDSIM_DBG
73 #define CONFIG_NANDSIM_DBG 0
74 #endif
75 #ifndef CONFIG_NANDSIM_MAX_PARTS
76 #define CONFIG_NANDSIM_MAX_PARTS 32
77 #endif
78
79 static uint access_delay = CONFIG_NANDSIM_ACCESS_DELAY;
80 static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY;
81 static uint erase_delay = CONFIG_NANDSIM_ERASE_DELAY;
82 static uint output_cycle = CONFIG_NANDSIM_OUTPUT_CYCLE;
83 static uint input_cycle = CONFIG_NANDSIM_INPUT_CYCLE;
84 static uint bus_width = CONFIG_NANDSIM_BUS_WIDTH;
85 static uint do_delays = CONFIG_NANDSIM_DO_DELAYS;
86 static uint log = CONFIG_NANDSIM_LOG;
87 static uint dbg = CONFIG_NANDSIM_DBG;
88 static unsigned long parts[CONFIG_NANDSIM_MAX_PARTS];
89 static unsigned int parts_num;
90 static char *badblocks = NULL;
91 static char *weakblocks = NULL;
92 static char *weakpages = NULL;
93 static unsigned int bitflips = 0;
94 static char *gravepages = NULL;
95 static unsigned int overridesize = 0;
96 static char *cache_file = NULL;
97 static unsigned int bbt;
98 static unsigned int bch;
99 static u_char id_bytes[8] = {
100 [0] = CONFIG_NANDSIM_FIRST_ID_BYTE,
101 [1] = CONFIG_NANDSIM_SECOND_ID_BYTE,
102 [2] = CONFIG_NANDSIM_THIRD_ID_BYTE,
103 [3] = CONFIG_NANDSIM_FOURTH_ID_BYTE,
104 [4 ... 7] = 0xFF,
105 };
106
107 module_param_array(id_bytes, byte, NULL, 0400);
108 module_param_named(first_id_byte, id_bytes[0], byte, 0400);
109 module_param_named(second_id_byte, id_bytes[1], byte, 0400);
110 module_param_named(third_id_byte, id_bytes[2], byte, 0400);
111 module_param_named(fourth_id_byte, id_bytes[3], byte, 0400);
112 module_param(access_delay, uint, 0400);
113 module_param(programm_delay, uint, 0400);
114 module_param(erase_delay, uint, 0400);
115 module_param(output_cycle, uint, 0400);
116 module_param(input_cycle, uint, 0400);
117 module_param(bus_width, uint, 0400);
118 module_param(do_delays, uint, 0400);
119 module_param(log, uint, 0400);
120 module_param(dbg, uint, 0400);
121 module_param_array(parts, ulong, &parts_num, 0400);
122 module_param(badblocks, charp, 0400);
123 module_param(weakblocks, charp, 0400);
124 module_param(weakpages, charp, 0400);
125 module_param(bitflips, uint, 0400);
126 module_param(gravepages, charp, 0400);
127 module_param(overridesize, uint, 0400);
128 module_param(cache_file, charp, 0400);
129 module_param(bbt, uint, 0400);
130 module_param(bch, uint, 0400);
131
132 MODULE_PARM_DESC(id_bytes, "The ID bytes returned by NAND Flash 'read ID' command");
133 MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID) (obsolete)");
134 MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID) (obsolete)");
135 MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command (obsolete)");
136 MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command (obsolete)");
137 MODULE_PARM_DESC(access_delay, "Initial page access delay (microseconds)");
138 MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
139 MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)");
140 MODULE_PARM_DESC(output_cycle, "Word output (from flash) time (nanoseconds)");
141 MODULE_PARM_DESC(input_cycle, "Word input (to flash) time (nanoseconds)");
142 MODULE_PARM_DESC(bus_width, "Chip's bus width (8- or 16-bit)");
143 MODULE_PARM_DESC(do_delays, "Simulate NAND delays using busy-waits if not zero");
144 MODULE_PARM_DESC(log, "Perform logging if not zero");
145 MODULE_PARM_DESC(dbg, "Output debug information if not zero");
146 MODULE_PARM_DESC(parts, "Partition sizes (in erase blocks) separated by commas");
147 /* Page and erase block positions for the following parameters are independent of any partitions */
148 MODULE_PARM_DESC(badblocks, "Erase blocks that are initially marked bad, separated by commas");
149 MODULE_PARM_DESC(weakblocks, "Weak erase blocks [: remaining erase cycles (defaults to 3)]"
150 " separated by commas e.g. 113:2 means eb 113"
151 " can be erased only twice before failing");
152 MODULE_PARM_DESC(weakpages, "Weak pages [: maximum writes (defaults to 3)]"
153 " separated by commas e.g. 1401:2 means page 1401"
154 " can be written only twice before failing");
155 MODULE_PARM_DESC(bitflips, "Maximum number of random bit flips per page (zero by default)");
156 MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]"
157 " separated by commas e.g. 1401:2 means page 1401"
158 " can be read only twice before failing");
159 MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. "
160 "The size is specified in erase blocks and as the exponent of a power of two"
161 " e.g. 5 means a size of 32 erase blocks");
162 MODULE_PARM_DESC(cache_file, "File to use to cache nand pages instead of memory");
163 MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in data area");
164 MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
165 "be correctable in 512-byte blocks");
166
167 /* The largest possible page size */
168 #define NS_LARGEST_PAGE_SIZE 4096
169
170 /* Simulator's output macros (logging, debugging, warning, error) */
171 #define NS_LOG(args...) \
172 do { if (log) pr_debug(" log: " args); } while(0)
173 #define NS_DBG(args...) \
174 do { if (dbg) pr_debug(" debug: " args); } while(0)
175 #define NS_WARN(args...) \
176 do { pr_warn(" warning: " args); } while(0)
177 #define NS_ERR(args...) \
178 do { pr_err(" error: " args); } while(0)
179 #define NS_INFO(args...) \
180 do { pr_info(" " args); } while(0)
181
182 /* Busy-wait delay macros (microseconds, milliseconds) */
183 #define NS_UDELAY(us) \
184 do { if (do_delays) udelay(us); } while(0)
185 #define NS_MDELAY(us) \
186 do { if (do_delays) mdelay(us); } while(0)
187
188 /* Is the nandsim structure initialized ? */
189 #define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0)
190
191 /* Good operation completion status */
192 #define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0)))
193
194 /* Operation failed completion status */
195 #define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns))
196
197 /* Calculate the page offset in flash RAM image by (row, column) address */
198 #define NS_RAW_OFFSET(ns) \
199 (((ns)->regs.row * (ns)->geom.pgszoob) + (ns)->regs.column)
200
201 /* Calculate the OOB offset in flash RAM image by (row, column) address */
202 #define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
203
204 /* Calculate the byte shift in the next page to access */
205 #define NS_PAGE_BYTE_SHIFT(ns) ((ns)->regs.column + (ns)->regs.off)
206
207 /* After a command is input, the simulator goes to one of the following states */
208 #define STATE_CMD_READ0 0x00000001 /* read data from the beginning of page */
209 #define STATE_CMD_READ1 0x00000002 /* read data from the second half of page */
210 #define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */
211 #define STATE_CMD_PAGEPROG 0x00000004 /* start page program */
212 #define STATE_CMD_READOOB 0x00000005 /* read OOB area */
213 #define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */
214 #define STATE_CMD_STATUS 0x00000007 /* read status */
215 #define STATE_CMD_SEQIN 0x00000009 /* sequential data input */
216 #define STATE_CMD_READID 0x0000000A /* read ID */
217 #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */
218 #define STATE_CMD_RESET 0x0000000C /* reset */
219 #define STATE_CMD_RNDOUT 0x0000000D /* random output command */
220 #define STATE_CMD_RNDOUTSTART 0x0000000E /* random output start command */
221 #define STATE_CMD_MASK 0x0000000F /* command states mask */
222
223 /* After an address is input, the simulator goes to one of these states */
224 #define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
225 #define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
226 #define STATE_ADDR_COLUMN 0x00000030 /* column address was accepted */
227 #define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */
228 #define STATE_ADDR_MASK 0x00000070 /* address states mask */
229
230 /* During data input/output the simulator is in these states */
231 #define STATE_DATAIN 0x00000100 /* waiting for data input */
232 #define STATE_DATAIN_MASK 0x00000100 /* data input states mask */
233
234 #define STATE_DATAOUT 0x00001000 /* waiting for page data output */
235 #define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */
236 #define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */
237 #define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */
238
239 /* Previous operation is done, ready to accept new requests */
240 #define STATE_READY 0x00000000
241
242 /* This state is used to mark that the next state isn't known yet */
243 #define STATE_UNKNOWN 0x10000000
244
245 /* Simulator's actions bit masks */
246 #define ACTION_CPY 0x00100000 /* copy page/OOB to the internal buffer */
247 #define ACTION_PRGPAGE 0x00200000 /* program the internal buffer to flash */
248 #define ACTION_SECERASE 0x00300000 /* erase sector */
249 #define ACTION_ZEROOFF 0x00400000 /* don't add any offset to address */
250 #define ACTION_HALFOFF 0x00500000 /* add to address half of page */
251 #define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */
252 #define ACTION_MASK 0x00700000 /* action mask */
253
254 #define NS_OPER_NUM 13 /* Number of operations supported by the simulator */
255 #define NS_OPER_STATES 6 /* Maximum number of states in operation */
256
257 #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */
258 #define OPT_PAGE512 0x00000002 /* 512-byte page chips */
259 #define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */
260 #define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
261 #define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */
262 #define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
263 #define OPT_SMALLPAGE (OPT_PAGE512) /* 512-byte page chips */
264
265 /* Remove action bits from state */
266 #define NS_STATE(x) ((x) & ~ACTION_MASK)
267
268 /*
269 * Maximum previous states which need to be saved. Currently saving is
270 * only needed for page program operation with preceded read command
271 * (which is only valid for 512-byte pages).
272 */
273 #define NS_MAX_PREVSTATES 1
274
275 /* Maximum page cache pages needed to read or write a NAND page to the cache_file */
276 #define NS_MAX_HELD_PAGES 16
277
278 /*
279 * A union to represent flash memory contents and flash buffer.
280 */
281 union ns_mem {
282 u_char *byte; /* for byte access */
283 uint16_t *word; /* for 16-bit word access */
284 };
285
286 /*
287 * The structure which describes all the internal simulator data.
288 */
289 struct nandsim {
290 struct nand_chip chip;
291 struct nand_controller base;
292 struct mtd_partition partitions[CONFIG_NANDSIM_MAX_PARTS];
293 unsigned int nbparts;
294
295 uint busw; /* flash chip bus width (8 or 16) */
296 u_char ids[8]; /* chip's ID bytes */
297 uint32_t options; /* chip's characteristic bits */
298 uint32_t state; /* current chip state */
299 uint32_t nxstate; /* next expected state */
300
301 uint32_t *op; /* current operation, NULL operations isn't known yet */
302 uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */
303 uint16_t npstates; /* number of previous states saved */
304 uint16_t stateidx; /* current state index */
305
306 /* The simulated NAND flash pages array */
307 union ns_mem *pages;
308
309 /* Slab allocator for nand pages */
310 struct kmem_cache *nand_pages_slab;
311
312 /* Internal buffer of page + OOB size bytes */
313 union ns_mem buf;
314
315 /* NAND flash "geometry" */
316 struct {
317 uint64_t totsz; /* total flash size, bytes */
318 uint32_t secsz; /* flash sector (erase block) size, bytes */
319 uint pgsz; /* NAND flash page size, bytes */
320 uint oobsz; /* page OOB area size, bytes */
321 uint64_t totszoob; /* total flash size including OOB, bytes */
322 uint pgszoob; /* page size including OOB , bytes*/
323 uint secszoob; /* sector size including OOB, bytes */
324 uint pgnum; /* total number of pages */
325 uint pgsec; /* number of pages per sector */
326 uint secshift; /* bits number in sector size */
327 uint pgshift; /* bits number in page size */
328 uint pgaddrbytes; /* bytes per page address */
329 uint secaddrbytes; /* bytes per sector address */
330 uint idbytes; /* the number ID bytes that this chip outputs */
331 } geom;
332
333 /* NAND flash internal registers */
334 struct {
335 unsigned command; /* the command register */
336 u_char status; /* the status register */
337 uint row; /* the page number */
338 uint column; /* the offset within page */
339 uint count; /* internal counter */
340 uint num; /* number of bytes which must be processed */
341 uint off; /* fixed page offset */
342 } regs;
343
344 /* NAND flash lines state */
345 struct {
346 int ce; /* chip Enable */
347 int cle; /* command Latch Enable */
348 int ale; /* address Latch Enable */
349 int wp; /* write Protect */
350 } lines;
351
352 /* Fields needed when using a cache file */
353 struct file *cfile; /* Open file */
354 unsigned long *pages_written; /* Which pages have been written */
355 void *file_buf;
356 struct page *held_pages[NS_MAX_HELD_PAGES];
357 int held_cnt;
358
359 /* debugfs entry */
360 struct dentry *dent;
361 };
362
363 /*
364 * Operations array. To perform any operation the simulator must pass
365 * through the correspondent states chain.
366 */
367 static struct nandsim_operations {
368 uint32_t reqopts; /* options which are required to perform the operation */
369 uint32_t states[NS_OPER_STATES]; /* operation's states */
370 } ops[NS_OPER_NUM] = {
371 /* Read page + OOB from the beginning */
372 {OPT_SMALLPAGE, {STATE_CMD_READ0 | ACTION_ZEROOFF, STATE_ADDR_PAGE | ACTION_CPY,
373 STATE_DATAOUT, STATE_READY}},
374 /* Read page + OOB from the second half */
375 {OPT_PAGE512_8BIT, {STATE_CMD_READ1 | ACTION_HALFOFF, STATE_ADDR_PAGE | ACTION_CPY,
376 STATE_DATAOUT, STATE_READY}},
377 /* Read OOB */
378 {OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
379 STATE_DATAOUT, STATE_READY}},
380 /* Program page starting from the beginning */
381 {OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
382 STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
383 /* Program page starting from the beginning */
384 {OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
385 STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
386 /* Program page starting from the second half */
387 {OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
388 STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
389 /* Program OOB */
390 {OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
391 STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
392 /* Erase sector */
393 {OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}},
394 /* Read status */
395 {OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}},
396 /* Read ID */
397 {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
398 /* Large page devices read page */
399 {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
400 STATE_DATAOUT, STATE_READY}},
401 /* Large page devices random page read */
402 {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
403 STATE_DATAOUT, STATE_READY}},
404 };
405
406 struct weak_block {
407 struct list_head list;
408 unsigned int erase_block_no;
409 unsigned int max_erases;
410 unsigned int erases_done;
411 };
412
413 static LIST_HEAD(weak_blocks);
414
415 struct weak_page {
416 struct list_head list;
417 unsigned int page_no;
418 unsigned int max_writes;
419 unsigned int writes_done;
420 };
421
422 static LIST_HEAD(weak_pages);
423
424 struct grave_page {
425 struct list_head list;
426 unsigned int page_no;
427 unsigned int max_reads;
428 unsigned int reads_done;
429 };
430
431 static LIST_HEAD(grave_pages);
432
433 static unsigned long *erase_block_wear = NULL;
434 static unsigned int wear_eb_count = 0;
435 static unsigned long total_wear = 0;
436
437 /* MTD structure for NAND controller */
438 static struct mtd_info *nsmtd;
439
ns_show(struct seq_file * m,void * private)440 static int ns_show(struct seq_file *m, void *private)
441 {
442 unsigned long wmin = -1, wmax = 0, avg;
443 unsigned long deciles[10], decile_max[10], tot = 0;
444 unsigned int i;
445
446 /* Calc wear stats */
447 for (i = 0; i < wear_eb_count; ++i) {
448 unsigned long wear = erase_block_wear[i];
449 if (wear < wmin)
450 wmin = wear;
451 if (wear > wmax)
452 wmax = wear;
453 tot += wear;
454 }
455
456 for (i = 0; i < 9; ++i) {
457 deciles[i] = 0;
458 decile_max[i] = (wmax * (i + 1) + 5) / 10;
459 }
460 deciles[9] = 0;
461 decile_max[9] = wmax;
462 for (i = 0; i < wear_eb_count; ++i) {
463 int d;
464 unsigned long wear = erase_block_wear[i];
465 for (d = 0; d < 10; ++d)
466 if (wear <= decile_max[d]) {
467 deciles[d] += 1;
468 break;
469 }
470 }
471 avg = tot / wear_eb_count;
472
473 /* Output wear report */
474 seq_printf(m, "Total numbers of erases: %lu\n", tot);
475 seq_printf(m, "Number of erase blocks: %u\n", wear_eb_count);
476 seq_printf(m, "Average number of erases: %lu\n", avg);
477 seq_printf(m, "Maximum number of erases: %lu\n", wmax);
478 seq_printf(m, "Minimum number of erases: %lu\n", wmin);
479 for (i = 0; i < 10; ++i) {
480 unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
481 if (from > decile_max[i])
482 continue;
483 seq_printf(m, "Number of ebs with erase counts from %lu to %lu : %lu\n",
484 from,
485 decile_max[i],
486 deciles[i]);
487 }
488
489 return 0;
490 }
491 DEFINE_SHOW_ATTRIBUTE(ns);
492
493 /**
494 * ns_debugfs_create - initialize debugfs
495 * @ns: nandsim device description object
496 *
497 * This function creates all debugfs files for UBI device @ubi. Returns zero in
498 * case of success and a negative error code in case of failure.
499 */
ns_debugfs_create(struct nandsim * ns)500 static int ns_debugfs_create(struct nandsim *ns)
501 {
502 struct dentry *root = nsmtd->dbg.dfs_dir;
503
504 /*
505 * Just skip debugfs initialization when the debugfs directory is
506 * missing.
507 */
508 if (IS_ERR_OR_NULL(root)) {
509 if (IS_ENABLED(CONFIG_DEBUG_FS) &&
510 !IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER))
511 NS_WARN("CONFIG_MTD_PARTITIONED_MASTER must be enabled to expose debugfs stuff\n");
512 return 0;
513 }
514
515 ns->dent = debugfs_create_file("nandsim_wear_report", 0400, root, ns,
516 &ns_fops);
517 if (IS_ERR_OR_NULL(ns->dent)) {
518 NS_ERR("cannot create \"nandsim_wear_report\" debugfs entry\n");
519 return -1;
520 }
521
522 return 0;
523 }
524
ns_debugfs_remove(struct nandsim * ns)525 static void ns_debugfs_remove(struct nandsim *ns)
526 {
527 debugfs_remove_recursive(ns->dent);
528 }
529
530 /*
531 * Allocate array of page pointers, create slab allocation for an array
532 * and initialize the array by NULL pointers.
533 *
534 * RETURNS: 0 if success, -ENOMEM if memory alloc fails.
535 */
ns_alloc_device(struct nandsim * ns)536 static int __init ns_alloc_device(struct nandsim *ns)
537 {
538 struct file *cfile;
539 int i, err;
540
541 if (cache_file) {
542 cfile = filp_open(cache_file, O_CREAT | O_RDWR | O_LARGEFILE, 0600);
543 if (IS_ERR(cfile))
544 return PTR_ERR(cfile);
545 if (!(cfile->f_mode & FMODE_CAN_READ)) {
546 NS_ERR("alloc_device: cache file not readable\n");
547 err = -EINVAL;
548 goto err_close_filp;
549 }
550 if (!(cfile->f_mode & FMODE_CAN_WRITE)) {
551 NS_ERR("alloc_device: cache file not writeable\n");
552 err = -EINVAL;
553 goto err_close_filp;
554 }
555 ns->pages_written =
556 vzalloc(array_size(sizeof(unsigned long),
557 BITS_TO_LONGS(ns->geom.pgnum)));
558 if (!ns->pages_written) {
559 NS_ERR("alloc_device: unable to allocate pages written array\n");
560 err = -ENOMEM;
561 goto err_close_filp;
562 }
563 ns->file_buf = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
564 if (!ns->file_buf) {
565 NS_ERR("alloc_device: unable to allocate file buf\n");
566 err = -ENOMEM;
567 goto err_free_pw;
568 }
569 ns->cfile = cfile;
570
571 return 0;
572
573 err_free_pw:
574 vfree(ns->pages_written);
575 err_close_filp:
576 filp_close(cfile, NULL);
577
578 return err;
579 }
580
581 ns->pages = vmalloc(array_size(sizeof(union ns_mem), ns->geom.pgnum));
582 if (!ns->pages) {
583 NS_ERR("alloc_device: unable to allocate page array\n");
584 return -ENOMEM;
585 }
586 for (i = 0; i < ns->geom.pgnum; i++) {
587 ns->pages[i].byte = NULL;
588 }
589 ns->nand_pages_slab = kmem_cache_create("nandsim",
590 ns->geom.pgszoob, 0, 0, NULL);
591 if (!ns->nand_pages_slab) {
592 NS_ERR("cache_create: unable to create kmem_cache\n");
593 err = -ENOMEM;
594 goto err_free_pg;
595 }
596
597 return 0;
598
599 err_free_pg:
600 vfree(ns->pages);
601
602 return err;
603 }
604
605 /*
606 * Free any allocated pages, and free the array of page pointers.
607 */
ns_free_device(struct nandsim * ns)608 static void ns_free_device(struct nandsim *ns)
609 {
610 int i;
611
612 if (ns->cfile) {
613 kfree(ns->file_buf);
614 vfree(ns->pages_written);
615 filp_close(ns->cfile, NULL);
616 return;
617 }
618
619 if (ns->pages) {
620 for (i = 0; i < ns->geom.pgnum; i++) {
621 if (ns->pages[i].byte)
622 kmem_cache_free(ns->nand_pages_slab,
623 ns->pages[i].byte);
624 }
625 kmem_cache_destroy(ns->nand_pages_slab);
626 vfree(ns->pages);
627 }
628 }
629
ns_get_partition_name(int i)630 static char __init *ns_get_partition_name(int i)
631 {
632 return kasprintf(GFP_KERNEL, "NAND simulator partition %d", i);
633 }
634
635 /*
636 * Initialize the nandsim structure.
637 *
638 * RETURNS: 0 if success, -ERRNO if failure.
639 */
ns_init(struct mtd_info * mtd)640 static int __init ns_init(struct mtd_info *mtd)
641 {
642 struct nand_chip *chip = mtd_to_nand(mtd);
643 struct nandsim *ns = nand_get_controller_data(chip);
644 int i, ret = 0;
645 uint64_t remains;
646 uint64_t next_offset;
647
648 if (NS_IS_INITIALIZED(ns)) {
649 NS_ERR("init_nandsim: nandsim is already initialized\n");
650 return -EIO;
651 }
652
653 /* Initialize the NAND flash parameters */
654 ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
655 ns->geom.totsz = mtd->size;
656 ns->geom.pgsz = mtd->writesize;
657 ns->geom.oobsz = mtd->oobsize;
658 ns->geom.secsz = mtd->erasesize;
659 ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
660 ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
661 ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
662 ns->geom.secshift = ffs(ns->geom.secsz) - 1;
663 ns->geom.pgshift = chip->page_shift;
664 ns->geom.pgsec = ns->geom.secsz / ns->geom.pgsz;
665 ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec;
666 ns->options = 0;
667
668 if (ns->geom.pgsz == 512) {
669 ns->options |= OPT_PAGE512;
670 if (ns->busw == 8)
671 ns->options |= OPT_PAGE512_8BIT;
672 } else if (ns->geom.pgsz == 2048) {
673 ns->options |= OPT_PAGE2048;
674 } else if (ns->geom.pgsz == 4096) {
675 ns->options |= OPT_PAGE4096;
676 } else {
677 NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
678 return -EIO;
679 }
680
681 if (ns->options & OPT_SMALLPAGE) {
682 if (ns->geom.totsz <= (32 << 20)) {
683 ns->geom.pgaddrbytes = 3;
684 ns->geom.secaddrbytes = 2;
685 } else {
686 ns->geom.pgaddrbytes = 4;
687 ns->geom.secaddrbytes = 3;
688 }
689 } else {
690 if (ns->geom.totsz <= (128 << 20)) {
691 ns->geom.pgaddrbytes = 4;
692 ns->geom.secaddrbytes = 2;
693 } else {
694 ns->geom.pgaddrbytes = 5;
695 ns->geom.secaddrbytes = 3;
696 }
697 }
698
699 /* Fill the partition_info structure */
700 if (parts_num > ARRAY_SIZE(ns->partitions)) {
701 NS_ERR("too many partitions.\n");
702 return -EINVAL;
703 }
704 remains = ns->geom.totsz;
705 next_offset = 0;
706 for (i = 0; i < parts_num; ++i) {
707 uint64_t part_sz = (uint64_t)parts[i] * ns->geom.secsz;
708
709 if (!part_sz || part_sz > remains) {
710 NS_ERR("bad partition size.\n");
711 return -EINVAL;
712 }
713 ns->partitions[i].name = ns_get_partition_name(i);
714 if (!ns->partitions[i].name) {
715 NS_ERR("unable to allocate memory.\n");
716 return -ENOMEM;
717 }
718 ns->partitions[i].offset = next_offset;
719 ns->partitions[i].size = part_sz;
720 next_offset += ns->partitions[i].size;
721 remains -= ns->partitions[i].size;
722 }
723 ns->nbparts = parts_num;
724 if (remains) {
725 if (parts_num + 1 > ARRAY_SIZE(ns->partitions)) {
726 NS_ERR("too many partitions.\n");
727 ret = -EINVAL;
728 goto free_partition_names;
729 }
730 ns->partitions[i].name = ns_get_partition_name(i);
731 if (!ns->partitions[i].name) {
732 NS_ERR("unable to allocate memory.\n");
733 ret = -ENOMEM;
734 goto free_partition_names;
735 }
736 ns->partitions[i].offset = next_offset;
737 ns->partitions[i].size = remains;
738 ns->nbparts += 1;
739 }
740
741 if (ns->busw == 16)
742 NS_WARN("16-bit flashes support wasn't tested\n");
743
744 printk("flash size: %llu MiB\n",
745 (unsigned long long)ns->geom.totsz >> 20);
746 printk("page size: %u bytes\n", ns->geom.pgsz);
747 printk("OOB area size: %u bytes\n", ns->geom.oobsz);
748 printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
749 printk("pages number: %u\n", ns->geom.pgnum);
750 printk("pages per sector: %u\n", ns->geom.pgsec);
751 printk("bus width: %u\n", ns->busw);
752 printk("bits in sector size: %u\n", ns->geom.secshift);
753 printk("bits in page size: %u\n", ns->geom.pgshift);
754 printk("bits in OOB size: %u\n", ffs(ns->geom.oobsz) - 1);
755 printk("flash size with OOB: %llu KiB\n",
756 (unsigned long long)ns->geom.totszoob >> 10);
757 printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
758 printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
759 printk("options: %#x\n", ns->options);
760
761 ret = ns_alloc_device(ns);
762 if (ret)
763 goto free_partition_names;
764
765 /* Allocate / initialize the internal buffer */
766 ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
767 if (!ns->buf.byte) {
768 NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
769 ns->geom.pgszoob);
770 ret = -ENOMEM;
771 goto free_device;
772 }
773 memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
774
775 return 0;
776
777 free_device:
778 ns_free_device(ns);
779 free_partition_names:
780 for (i = 0; i < ARRAY_SIZE(ns->partitions); ++i)
781 kfree(ns->partitions[i].name);
782
783 return ret;
784 }
785
786 /*
787 * Free the nandsim structure.
788 */
ns_free(struct nandsim * ns)789 static void ns_free(struct nandsim *ns)
790 {
791 int i;
792
793 for (i = 0; i < ARRAY_SIZE(ns->partitions); ++i)
794 kfree(ns->partitions[i].name);
795
796 kfree(ns->buf.byte);
797 ns_free_device(ns);
798
799 return;
800 }
801
ns_parse_badblocks(struct nandsim * ns,struct mtd_info * mtd)802 static int ns_parse_badblocks(struct nandsim *ns, struct mtd_info *mtd)
803 {
804 char *w;
805 int zero_ok;
806 unsigned int erase_block_no;
807 loff_t offset;
808
809 if (!badblocks)
810 return 0;
811 w = badblocks;
812 do {
813 zero_ok = (*w == '0' ? 1 : 0);
814 erase_block_no = simple_strtoul(w, &w, 0);
815 if (!zero_ok && !erase_block_no) {
816 NS_ERR("invalid badblocks.\n");
817 return -EINVAL;
818 }
819 offset = (loff_t)erase_block_no * ns->geom.secsz;
820 if (mtd_block_markbad(mtd, offset)) {
821 NS_ERR("invalid badblocks.\n");
822 return -EINVAL;
823 }
824 if (*w == ',')
825 w += 1;
826 } while (*w);
827 return 0;
828 }
829
ns_parse_weakblocks(void)830 static int ns_parse_weakblocks(void)
831 {
832 char *w;
833 int zero_ok;
834 unsigned int erase_block_no;
835 unsigned int max_erases;
836 struct weak_block *wb;
837
838 if (!weakblocks)
839 return 0;
840 w = weakblocks;
841 do {
842 zero_ok = (*w == '0' ? 1 : 0);
843 erase_block_no = simple_strtoul(w, &w, 0);
844 if (!zero_ok && !erase_block_no) {
845 NS_ERR("invalid weakblocks.\n");
846 return -EINVAL;
847 }
848 max_erases = 3;
849 if (*w == ':') {
850 w += 1;
851 max_erases = simple_strtoul(w, &w, 0);
852 }
853 if (*w == ',')
854 w += 1;
855 wb = kzalloc(sizeof(*wb), GFP_KERNEL);
856 if (!wb) {
857 NS_ERR("unable to allocate memory.\n");
858 return -ENOMEM;
859 }
860 wb->erase_block_no = erase_block_no;
861 wb->max_erases = max_erases;
862 list_add(&wb->list, &weak_blocks);
863 } while (*w);
864 return 0;
865 }
866
ns_erase_error(unsigned int erase_block_no)867 static int ns_erase_error(unsigned int erase_block_no)
868 {
869 struct weak_block *wb;
870
871 list_for_each_entry(wb, &weak_blocks, list)
872 if (wb->erase_block_no == erase_block_no) {
873 if (wb->erases_done >= wb->max_erases)
874 return 1;
875 wb->erases_done += 1;
876 return 0;
877 }
878 return 0;
879 }
880
ns_parse_weakpages(void)881 static int ns_parse_weakpages(void)
882 {
883 char *w;
884 int zero_ok;
885 unsigned int page_no;
886 unsigned int max_writes;
887 struct weak_page *wp;
888
889 if (!weakpages)
890 return 0;
891 w = weakpages;
892 do {
893 zero_ok = (*w == '0' ? 1 : 0);
894 page_no = simple_strtoul(w, &w, 0);
895 if (!zero_ok && !page_no) {
896 NS_ERR("invalid weakpages.\n");
897 return -EINVAL;
898 }
899 max_writes = 3;
900 if (*w == ':') {
901 w += 1;
902 max_writes = simple_strtoul(w, &w, 0);
903 }
904 if (*w == ',')
905 w += 1;
906 wp = kzalloc(sizeof(*wp), GFP_KERNEL);
907 if (!wp) {
908 NS_ERR("unable to allocate memory.\n");
909 return -ENOMEM;
910 }
911 wp->page_no = page_no;
912 wp->max_writes = max_writes;
913 list_add(&wp->list, &weak_pages);
914 } while (*w);
915 return 0;
916 }
917
ns_write_error(unsigned int page_no)918 static int ns_write_error(unsigned int page_no)
919 {
920 struct weak_page *wp;
921
922 list_for_each_entry(wp, &weak_pages, list)
923 if (wp->page_no == page_no) {
924 if (wp->writes_done >= wp->max_writes)
925 return 1;
926 wp->writes_done += 1;
927 return 0;
928 }
929 return 0;
930 }
931
ns_parse_gravepages(void)932 static int ns_parse_gravepages(void)
933 {
934 char *g;
935 int zero_ok;
936 unsigned int page_no;
937 unsigned int max_reads;
938 struct grave_page *gp;
939
940 if (!gravepages)
941 return 0;
942 g = gravepages;
943 do {
944 zero_ok = (*g == '0' ? 1 : 0);
945 page_no = simple_strtoul(g, &g, 0);
946 if (!zero_ok && !page_no) {
947 NS_ERR("invalid gravepagess.\n");
948 return -EINVAL;
949 }
950 max_reads = 3;
951 if (*g == ':') {
952 g += 1;
953 max_reads = simple_strtoul(g, &g, 0);
954 }
955 if (*g == ',')
956 g += 1;
957 gp = kzalloc(sizeof(*gp), GFP_KERNEL);
958 if (!gp) {
959 NS_ERR("unable to allocate memory.\n");
960 return -ENOMEM;
961 }
962 gp->page_no = page_no;
963 gp->max_reads = max_reads;
964 list_add(&gp->list, &grave_pages);
965 } while (*g);
966 return 0;
967 }
968
ns_read_error(unsigned int page_no)969 static int ns_read_error(unsigned int page_no)
970 {
971 struct grave_page *gp;
972
973 list_for_each_entry(gp, &grave_pages, list)
974 if (gp->page_no == page_no) {
975 if (gp->reads_done >= gp->max_reads)
976 return 1;
977 gp->reads_done += 1;
978 return 0;
979 }
980 return 0;
981 }
982
ns_setup_wear_reporting(struct mtd_info * mtd)983 static int ns_setup_wear_reporting(struct mtd_info *mtd)
984 {
985 wear_eb_count = div_u64(mtd->size, mtd->erasesize);
986 erase_block_wear = kcalloc(wear_eb_count, sizeof(unsigned long), GFP_KERNEL);
987 if (!erase_block_wear) {
988 NS_ERR("Too many erase blocks for wear reporting\n");
989 return -ENOMEM;
990 }
991 return 0;
992 }
993
ns_update_wear(unsigned int erase_block_no)994 static void ns_update_wear(unsigned int erase_block_no)
995 {
996 if (!erase_block_wear)
997 return;
998 total_wear += 1;
999 /*
1000 * TODO: Notify this through a debugfs entry,
1001 * instead of showing an error message.
1002 */
1003 if (total_wear == 0)
1004 NS_ERR("Erase counter total overflow\n");
1005 erase_block_wear[erase_block_no] += 1;
1006 if (erase_block_wear[erase_block_no] == 0)
1007 NS_ERR("Erase counter overflow for erase block %u\n", erase_block_no);
1008 }
1009
1010 /*
1011 * Returns the string representation of 'state' state.
1012 */
ns_get_state_name(uint32_t state)1013 static char *ns_get_state_name(uint32_t state)
1014 {
1015 switch (NS_STATE(state)) {
1016 case STATE_CMD_READ0:
1017 return "STATE_CMD_READ0";
1018 case STATE_CMD_READ1:
1019 return "STATE_CMD_READ1";
1020 case STATE_CMD_PAGEPROG:
1021 return "STATE_CMD_PAGEPROG";
1022 case STATE_CMD_READOOB:
1023 return "STATE_CMD_READOOB";
1024 case STATE_CMD_READSTART:
1025 return "STATE_CMD_READSTART";
1026 case STATE_CMD_ERASE1:
1027 return "STATE_CMD_ERASE1";
1028 case STATE_CMD_STATUS:
1029 return "STATE_CMD_STATUS";
1030 case STATE_CMD_SEQIN:
1031 return "STATE_CMD_SEQIN";
1032 case STATE_CMD_READID:
1033 return "STATE_CMD_READID";
1034 case STATE_CMD_ERASE2:
1035 return "STATE_CMD_ERASE2";
1036 case STATE_CMD_RESET:
1037 return "STATE_CMD_RESET";
1038 case STATE_CMD_RNDOUT:
1039 return "STATE_CMD_RNDOUT";
1040 case STATE_CMD_RNDOUTSTART:
1041 return "STATE_CMD_RNDOUTSTART";
1042 case STATE_ADDR_PAGE:
1043 return "STATE_ADDR_PAGE";
1044 case STATE_ADDR_SEC:
1045 return "STATE_ADDR_SEC";
1046 case STATE_ADDR_ZERO:
1047 return "STATE_ADDR_ZERO";
1048 case STATE_ADDR_COLUMN:
1049 return "STATE_ADDR_COLUMN";
1050 case STATE_DATAIN:
1051 return "STATE_DATAIN";
1052 case STATE_DATAOUT:
1053 return "STATE_DATAOUT";
1054 case STATE_DATAOUT_ID:
1055 return "STATE_DATAOUT_ID";
1056 case STATE_DATAOUT_STATUS:
1057 return "STATE_DATAOUT_STATUS";
1058 case STATE_READY:
1059 return "STATE_READY";
1060 case STATE_UNKNOWN:
1061 return "STATE_UNKNOWN";
1062 }
1063
1064 NS_ERR("get_state_name: unknown state, BUG\n");
1065 return NULL;
1066 }
1067
1068 /*
1069 * Check if command is valid.
1070 *
1071 * RETURNS: 1 if wrong command, 0 if right.
1072 */
ns_check_command(int cmd)1073 static int ns_check_command(int cmd)
1074 {
1075 switch (cmd) {
1076
1077 case NAND_CMD_READ0:
1078 case NAND_CMD_READ1:
1079 case NAND_CMD_READSTART:
1080 case NAND_CMD_PAGEPROG:
1081 case NAND_CMD_READOOB:
1082 case NAND_CMD_ERASE1:
1083 case NAND_CMD_STATUS:
1084 case NAND_CMD_SEQIN:
1085 case NAND_CMD_READID:
1086 case NAND_CMD_ERASE2:
1087 case NAND_CMD_RESET:
1088 case NAND_CMD_RNDOUT:
1089 case NAND_CMD_RNDOUTSTART:
1090 return 0;
1091
1092 default:
1093 return 1;
1094 }
1095 }
1096
1097 /*
1098 * Returns state after command is accepted by command number.
1099 */
ns_get_state_by_command(unsigned command)1100 static uint32_t ns_get_state_by_command(unsigned command)
1101 {
1102 switch (command) {
1103 case NAND_CMD_READ0:
1104 return STATE_CMD_READ0;
1105 case NAND_CMD_READ1:
1106 return STATE_CMD_READ1;
1107 case NAND_CMD_PAGEPROG:
1108 return STATE_CMD_PAGEPROG;
1109 case NAND_CMD_READSTART:
1110 return STATE_CMD_READSTART;
1111 case NAND_CMD_READOOB:
1112 return STATE_CMD_READOOB;
1113 case NAND_CMD_ERASE1:
1114 return STATE_CMD_ERASE1;
1115 case NAND_CMD_STATUS:
1116 return STATE_CMD_STATUS;
1117 case NAND_CMD_SEQIN:
1118 return STATE_CMD_SEQIN;
1119 case NAND_CMD_READID:
1120 return STATE_CMD_READID;
1121 case NAND_CMD_ERASE2:
1122 return STATE_CMD_ERASE2;
1123 case NAND_CMD_RESET:
1124 return STATE_CMD_RESET;
1125 case NAND_CMD_RNDOUT:
1126 return STATE_CMD_RNDOUT;
1127 case NAND_CMD_RNDOUTSTART:
1128 return STATE_CMD_RNDOUTSTART;
1129 }
1130
1131 NS_ERR("get_state_by_command: unknown command, BUG\n");
1132 return 0;
1133 }
1134
1135 /*
1136 * Move an address byte to the correspondent internal register.
1137 */
ns_accept_addr_byte(struct nandsim * ns,u_char bt)1138 static inline void ns_accept_addr_byte(struct nandsim *ns, u_char bt)
1139 {
1140 uint byte = (uint)bt;
1141
1142 if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes))
1143 ns->regs.column |= (byte << 8 * ns->regs.count);
1144 else {
1145 ns->regs.row |= (byte << 8 * (ns->regs.count -
1146 ns->geom.pgaddrbytes +
1147 ns->geom.secaddrbytes));
1148 }
1149
1150 return;
1151 }
1152
1153 /*
1154 * Switch to STATE_READY state.
1155 */
ns_switch_to_ready_state(struct nandsim * ns,u_char status)1156 static inline void ns_switch_to_ready_state(struct nandsim *ns, u_char status)
1157 {
1158 NS_DBG("switch_to_ready_state: switch to %s state\n",
1159 ns_get_state_name(STATE_READY));
1160
1161 ns->state = STATE_READY;
1162 ns->nxstate = STATE_UNKNOWN;
1163 ns->op = NULL;
1164 ns->npstates = 0;
1165 ns->stateidx = 0;
1166 ns->regs.num = 0;
1167 ns->regs.count = 0;
1168 ns->regs.off = 0;
1169 ns->regs.row = 0;
1170 ns->regs.column = 0;
1171 ns->regs.status = status;
1172 }
1173
1174 /*
1175 * If the operation isn't known yet, try to find it in the global array
1176 * of supported operations.
1177 *
1178 * Operation can be unknown because of the following.
1179 * 1. New command was accepted and this is the first call to find the
1180 * correspondent states chain. In this case ns->npstates = 0;
1181 * 2. There are several operations which begin with the same command(s)
1182 * (for example program from the second half and read from the
1183 * second half operations both begin with the READ1 command). In this
1184 * case the ns->pstates[] array contains previous states.
1185 *
1186 * Thus, the function tries to find operation containing the following
1187 * states (if the 'flag' parameter is 0):
1188 * ns->pstates[0], ... ns->pstates[ns->npstates], ns->state
1189 *
1190 * If (one and only one) matching operation is found, it is accepted (
1191 * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
1192 * zeroed).
1193 *
1194 * If there are several matches, the current state is pushed to the
1195 * ns->pstates.
1196 *
1197 * The operation can be unknown only while commands are input to the chip.
1198 * As soon as address command is accepted, the operation must be known.
1199 * In such situation the function is called with 'flag' != 0, and the
1200 * operation is searched using the following pattern:
1201 * ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
1202 *
1203 * It is supposed that this pattern must either match one operation or
1204 * none. There can't be ambiguity in that case.
1205 *
1206 * If no matches found, the function does the following:
1207 * 1. if there are saved states present, try to ignore them and search
1208 * again only using the last command. If nothing was found, switch
1209 * to the STATE_READY state.
1210 * 2. if there are no saved states, switch to the STATE_READY state.
1211 *
1212 * RETURNS: -2 - no matched operations found.
1213 * -1 - several matches.
1214 * 0 - operation is found.
1215 */
ns_find_operation(struct nandsim * ns,uint32_t flag)1216 static int ns_find_operation(struct nandsim *ns, uint32_t flag)
1217 {
1218 int opsfound = 0;
1219 int i, j, idx = 0;
1220
1221 for (i = 0; i < NS_OPER_NUM; i++) {
1222
1223 int found = 1;
1224
1225 if (!(ns->options & ops[i].reqopts))
1226 /* Ignore operations we can't perform */
1227 continue;
1228
1229 if (flag) {
1230 if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK))
1231 continue;
1232 } else {
1233 if (NS_STATE(ns->state) != NS_STATE(ops[i].states[ns->npstates]))
1234 continue;
1235 }
1236
1237 for (j = 0; j < ns->npstates; j++)
1238 if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j])
1239 && (ns->options & ops[idx].reqopts)) {
1240 found = 0;
1241 break;
1242 }
1243
1244 if (found) {
1245 idx = i;
1246 opsfound += 1;
1247 }
1248 }
1249
1250 if (opsfound == 1) {
1251 /* Exact match */
1252 ns->op = &ops[idx].states[0];
1253 if (flag) {
1254 /*
1255 * In this case the find_operation function was
1256 * called when address has just began input. But it isn't
1257 * yet fully input and the current state must
1258 * not be one of STATE_ADDR_*, but the STATE_ADDR_*
1259 * state must be the next state (ns->nxstate).
1260 */
1261 ns->stateidx = ns->npstates - 1;
1262 } else {
1263 ns->stateidx = ns->npstates;
1264 }
1265 ns->npstates = 0;
1266 ns->state = ns->op[ns->stateidx];
1267 ns->nxstate = ns->op[ns->stateidx + 1];
1268 NS_DBG("find_operation: operation found, index: %d, state: %s, nxstate %s\n",
1269 idx, ns_get_state_name(ns->state),
1270 ns_get_state_name(ns->nxstate));
1271 return 0;
1272 }
1273
1274 if (opsfound == 0) {
1275 /* Nothing was found. Try to ignore previous commands (if any) and search again */
1276 if (ns->npstates != 0) {
1277 NS_DBG("find_operation: no operation found, try again with state %s\n",
1278 ns_get_state_name(ns->state));
1279 ns->npstates = 0;
1280 return ns_find_operation(ns, 0);
1281
1282 }
1283 NS_DBG("find_operation: no operations found\n");
1284 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1285 return -2;
1286 }
1287
1288 if (flag) {
1289 /* This shouldn't happen */
1290 NS_DBG("find_operation: BUG, operation must be known if address is input\n");
1291 return -2;
1292 }
1293
1294 NS_DBG("find_operation: there is still ambiguity\n");
1295
1296 ns->pstates[ns->npstates++] = ns->state;
1297
1298 return -1;
1299 }
1300
ns_put_pages(struct nandsim * ns)1301 static void ns_put_pages(struct nandsim *ns)
1302 {
1303 int i;
1304
1305 for (i = 0; i < ns->held_cnt; i++)
1306 put_page(ns->held_pages[i]);
1307 }
1308
1309 /* Get page cache pages in advance to provide NOFS memory allocation */
ns_get_pages(struct nandsim * ns,struct file * file,size_t count,loff_t pos)1310 static int ns_get_pages(struct nandsim *ns, struct file *file, size_t count,
1311 loff_t pos)
1312 {
1313 pgoff_t index, start_index, end_index;
1314 struct page *page;
1315 struct address_space *mapping = file->f_mapping;
1316
1317 start_index = pos >> PAGE_SHIFT;
1318 end_index = (pos + count - 1) >> PAGE_SHIFT;
1319 if (end_index - start_index + 1 > NS_MAX_HELD_PAGES)
1320 return -EINVAL;
1321 ns->held_cnt = 0;
1322 for (index = start_index; index <= end_index; index++) {
1323 page = find_get_page(mapping, index);
1324 if (page == NULL) {
1325 page = find_or_create_page(mapping, index, GFP_NOFS);
1326 if (page == NULL) {
1327 write_inode_now(mapping->host, 1);
1328 page = find_or_create_page(mapping, index, GFP_NOFS);
1329 }
1330 if (page == NULL) {
1331 ns_put_pages(ns);
1332 return -ENOMEM;
1333 }
1334 unlock_page(page);
1335 }
1336 ns->held_pages[ns->held_cnt++] = page;
1337 }
1338 return 0;
1339 }
1340
ns_read_file(struct nandsim * ns,struct file * file,void * buf,size_t count,loff_t pos)1341 static ssize_t ns_read_file(struct nandsim *ns, struct file *file, void *buf,
1342 size_t count, loff_t pos)
1343 {
1344 ssize_t tx;
1345 int err;
1346 unsigned int noreclaim_flag;
1347
1348 err = ns_get_pages(ns, file, count, pos);
1349 if (err)
1350 return err;
1351 noreclaim_flag = memalloc_noreclaim_save();
1352 tx = kernel_read(file, buf, count, &pos);
1353 memalloc_noreclaim_restore(noreclaim_flag);
1354 ns_put_pages(ns);
1355 return tx;
1356 }
1357
ns_write_file(struct nandsim * ns,struct file * file,void * buf,size_t count,loff_t pos)1358 static ssize_t ns_write_file(struct nandsim *ns, struct file *file, void *buf,
1359 size_t count, loff_t pos)
1360 {
1361 ssize_t tx;
1362 int err;
1363 unsigned int noreclaim_flag;
1364
1365 err = ns_get_pages(ns, file, count, pos);
1366 if (err)
1367 return err;
1368 noreclaim_flag = memalloc_noreclaim_save();
1369 tx = kernel_write(file, buf, count, &pos);
1370 memalloc_noreclaim_restore(noreclaim_flag);
1371 ns_put_pages(ns);
1372 return tx;
1373 }
1374
1375 /*
1376 * Returns a pointer to the current page.
1377 */
NS_GET_PAGE(struct nandsim * ns)1378 static inline union ns_mem *NS_GET_PAGE(struct nandsim *ns)
1379 {
1380 return &(ns->pages[ns->regs.row]);
1381 }
1382
1383 /*
1384 * Retuns a pointer to the current byte, within the current page.
1385 */
NS_PAGE_BYTE_OFF(struct nandsim * ns)1386 static inline u_char *NS_PAGE_BYTE_OFF(struct nandsim *ns)
1387 {
1388 return NS_GET_PAGE(ns)->byte + NS_PAGE_BYTE_SHIFT(ns);
1389 }
1390
ns_do_read_error(struct nandsim * ns,int num)1391 static int ns_do_read_error(struct nandsim *ns, int num)
1392 {
1393 unsigned int page_no = ns->regs.row;
1394
1395 if (ns_read_error(page_no)) {
1396 get_random_bytes(ns->buf.byte, num);
1397 NS_WARN("simulating read error in page %u\n", page_no);
1398 return 1;
1399 }
1400 return 0;
1401 }
1402
ns_do_bit_flips(struct nandsim * ns,int num)1403 static void ns_do_bit_flips(struct nandsim *ns, int num)
1404 {
1405 if (bitflips && get_random_u16() < (1 << 6)) {
1406 int flips = 1;
1407 if (bitflips > 1)
1408 flips = get_random_u32_inclusive(1, bitflips);
1409 while (flips--) {
1410 int pos = get_random_u32_below(num * 8);
1411 ns->buf.byte[pos / 8] ^= (1 << (pos % 8));
1412 NS_WARN("read_page: flipping bit %d in page %d "
1413 "reading from %d ecc: corrected=%u failed=%u\n",
1414 pos, ns->regs.row, NS_PAGE_BYTE_SHIFT(ns),
1415 nsmtd->ecc_stats.corrected, nsmtd->ecc_stats.failed);
1416 }
1417 }
1418 }
1419
1420 /*
1421 * Fill the NAND buffer with data read from the specified page.
1422 */
ns_read_page(struct nandsim * ns,int num)1423 static void ns_read_page(struct nandsim *ns, int num)
1424 {
1425 union ns_mem *mypage;
1426
1427 if (ns->cfile) {
1428 if (!test_bit(ns->regs.row, ns->pages_written)) {
1429 NS_DBG("read_page: page %d not written\n", ns->regs.row);
1430 memset(ns->buf.byte, 0xFF, num);
1431 } else {
1432 loff_t pos;
1433 ssize_t tx;
1434
1435 NS_DBG("read_page: page %d written, reading from %d\n",
1436 ns->regs.row, NS_PAGE_BYTE_SHIFT(ns));
1437 if (ns_do_read_error(ns, num))
1438 return;
1439 pos = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
1440 tx = ns_read_file(ns, ns->cfile, ns->buf.byte, num,
1441 pos);
1442 if (tx != num) {
1443 NS_ERR("read_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
1444 return;
1445 }
1446 ns_do_bit_flips(ns, num);
1447 }
1448 return;
1449 }
1450
1451 mypage = NS_GET_PAGE(ns);
1452 if (mypage->byte == NULL) {
1453 NS_DBG("read_page: page %d not allocated\n", ns->regs.row);
1454 memset(ns->buf.byte, 0xFF, num);
1455 } else {
1456 NS_DBG("read_page: page %d allocated, reading from %d\n",
1457 ns->regs.row, NS_PAGE_BYTE_SHIFT(ns));
1458 if (ns_do_read_error(ns, num))
1459 return;
1460 memcpy(ns->buf.byte, NS_PAGE_BYTE_OFF(ns), num);
1461 ns_do_bit_flips(ns, num);
1462 }
1463 }
1464
1465 /*
1466 * Erase all pages in the specified sector.
1467 */
ns_erase_sector(struct nandsim * ns)1468 static void ns_erase_sector(struct nandsim *ns)
1469 {
1470 union ns_mem *mypage;
1471 int i;
1472
1473 if (ns->cfile) {
1474 for (i = 0; i < ns->geom.pgsec; i++)
1475 if (__test_and_clear_bit(ns->regs.row + i,
1476 ns->pages_written)) {
1477 NS_DBG("erase_sector: freeing page %d\n", ns->regs.row + i);
1478 }
1479 return;
1480 }
1481
1482 mypage = NS_GET_PAGE(ns);
1483 for (i = 0; i < ns->geom.pgsec; i++) {
1484 if (mypage->byte != NULL) {
1485 NS_DBG("erase_sector: freeing page %d\n", ns->regs.row+i);
1486 kmem_cache_free(ns->nand_pages_slab, mypage->byte);
1487 mypage->byte = NULL;
1488 }
1489 mypage++;
1490 }
1491 }
1492
1493 /*
1494 * Program the specified page with the contents from the NAND buffer.
1495 */
ns_prog_page(struct nandsim * ns,int num)1496 static int ns_prog_page(struct nandsim *ns, int num)
1497 {
1498 int i;
1499 union ns_mem *mypage;
1500 u_char *pg_off;
1501
1502 if (ns->cfile) {
1503 loff_t off;
1504 ssize_t tx;
1505 int all;
1506
1507 NS_DBG("prog_page: writing page %d\n", ns->regs.row);
1508 pg_off = ns->file_buf + NS_PAGE_BYTE_SHIFT(ns);
1509 off = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
1510 if (!test_bit(ns->regs.row, ns->pages_written)) {
1511 all = 1;
1512 memset(ns->file_buf, 0xff, ns->geom.pgszoob);
1513 } else {
1514 all = 0;
1515 tx = ns_read_file(ns, ns->cfile, pg_off, num, off);
1516 if (tx != num) {
1517 NS_ERR("prog_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
1518 return -1;
1519 }
1520 }
1521 for (i = 0; i < num; i++)
1522 pg_off[i] &= ns->buf.byte[i];
1523 if (all) {
1524 loff_t pos = (loff_t)ns->regs.row * ns->geom.pgszoob;
1525 tx = ns_write_file(ns, ns->cfile, ns->file_buf,
1526 ns->geom.pgszoob, pos);
1527 if (tx != ns->geom.pgszoob) {
1528 NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
1529 return -1;
1530 }
1531 __set_bit(ns->regs.row, ns->pages_written);
1532 } else {
1533 tx = ns_write_file(ns, ns->cfile, pg_off, num, off);
1534 if (tx != num) {
1535 NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
1536 return -1;
1537 }
1538 }
1539 return 0;
1540 }
1541
1542 mypage = NS_GET_PAGE(ns);
1543 if (mypage->byte == NULL) {
1544 NS_DBG("prog_page: allocating page %d\n", ns->regs.row);
1545 /*
1546 * We allocate memory with GFP_NOFS because a flash FS may
1547 * utilize this. If it is holding an FS lock, then gets here,
1548 * then kernel memory alloc runs writeback which goes to the FS
1549 * again and deadlocks. This was seen in practice.
1550 */
1551 mypage->byte = kmem_cache_alloc(ns->nand_pages_slab, GFP_NOFS);
1552 if (mypage->byte == NULL) {
1553 NS_ERR("prog_page: error allocating memory for page %d\n", ns->regs.row);
1554 return -1;
1555 }
1556 memset(mypage->byte, 0xFF, ns->geom.pgszoob);
1557 }
1558
1559 pg_off = NS_PAGE_BYTE_OFF(ns);
1560 for (i = 0; i < num; i++)
1561 pg_off[i] &= ns->buf.byte[i];
1562
1563 return 0;
1564 }
1565
1566 /*
1567 * If state has any action bit, perform this action.
1568 *
1569 * RETURNS: 0 if success, -1 if error.
1570 */
ns_do_state_action(struct nandsim * ns,uint32_t action)1571 static int ns_do_state_action(struct nandsim *ns, uint32_t action)
1572 {
1573 int num;
1574 int busdiv = ns->busw == 8 ? 1 : 2;
1575 unsigned int erase_block_no, page_no;
1576
1577 action &= ACTION_MASK;
1578
1579 /* Check that page address input is correct */
1580 if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) {
1581 NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row);
1582 return -1;
1583 }
1584
1585 switch (action) {
1586
1587 case ACTION_CPY:
1588 /*
1589 * Copy page data to the internal buffer.
1590 */
1591
1592 /* Column shouldn't be very large */
1593 if (ns->regs.column >= (ns->geom.pgszoob - ns->regs.off)) {
1594 NS_ERR("do_state_action: column number is too large\n");
1595 break;
1596 }
1597 num = ns->geom.pgszoob - NS_PAGE_BYTE_SHIFT(ns);
1598 ns_read_page(ns, num);
1599
1600 NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
1601 num, NS_RAW_OFFSET(ns) + ns->regs.off);
1602
1603 if (ns->regs.off == 0)
1604 NS_LOG("read page %d\n", ns->regs.row);
1605 else if (ns->regs.off < ns->geom.pgsz)
1606 NS_LOG("read page %d (second half)\n", ns->regs.row);
1607 else
1608 NS_LOG("read OOB of page %d\n", ns->regs.row);
1609
1610 NS_UDELAY(access_delay);
1611 NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv);
1612
1613 break;
1614
1615 case ACTION_SECERASE:
1616 /*
1617 * Erase sector.
1618 */
1619
1620 if (ns->lines.wp) {
1621 NS_ERR("do_state_action: device is write-protected, ignore sector erase\n");
1622 return -1;
1623 }
1624
1625 if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec
1626 || (ns->regs.row & ~(ns->geom.secsz - 1))) {
1627 NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row);
1628 return -1;
1629 }
1630
1631 ns->regs.row = (ns->regs.row <<
1632 8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column;
1633 ns->regs.column = 0;
1634
1635 erase_block_no = ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift);
1636
1637 NS_DBG("do_state_action: erase sector at address %#x, off = %d\n",
1638 ns->regs.row, NS_RAW_OFFSET(ns));
1639 NS_LOG("erase sector %u\n", erase_block_no);
1640
1641 ns_erase_sector(ns);
1642
1643 NS_MDELAY(erase_delay);
1644
1645 if (erase_block_wear)
1646 ns_update_wear(erase_block_no);
1647
1648 if (ns_erase_error(erase_block_no)) {
1649 NS_WARN("simulating erase failure in erase block %u\n", erase_block_no);
1650 return -1;
1651 }
1652
1653 break;
1654
1655 case ACTION_PRGPAGE:
1656 /*
1657 * Program page - move internal buffer data to the page.
1658 */
1659
1660 if (ns->lines.wp) {
1661 NS_WARN("do_state_action: device is write-protected, programm\n");
1662 return -1;
1663 }
1664
1665 num = ns->geom.pgszoob - NS_PAGE_BYTE_SHIFT(ns);
1666 if (num != ns->regs.count) {
1667 NS_ERR("do_state_action: too few bytes were input (%d instead of %d)\n",
1668 ns->regs.count, num);
1669 return -1;
1670 }
1671
1672 if (ns_prog_page(ns, num) == -1)
1673 return -1;
1674
1675 page_no = ns->regs.row;
1676
1677 NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
1678 num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
1679 NS_LOG("programm page %d\n", ns->regs.row);
1680
1681 NS_UDELAY(programm_delay);
1682 NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv);
1683
1684 if (ns_write_error(page_no)) {
1685 NS_WARN("simulating write failure in page %u\n", page_no);
1686 return -1;
1687 }
1688
1689 break;
1690
1691 case ACTION_ZEROOFF:
1692 NS_DBG("do_state_action: set internal offset to 0\n");
1693 ns->regs.off = 0;
1694 break;
1695
1696 case ACTION_HALFOFF:
1697 if (!(ns->options & OPT_PAGE512_8BIT)) {
1698 NS_ERR("do_state_action: BUG! can't skip half of page for non-512"
1699 "byte page size 8x chips\n");
1700 return -1;
1701 }
1702 NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz/2);
1703 ns->regs.off = ns->geom.pgsz/2;
1704 break;
1705
1706 case ACTION_OOBOFF:
1707 NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz);
1708 ns->regs.off = ns->geom.pgsz;
1709 break;
1710
1711 default:
1712 NS_DBG("do_state_action: BUG! unknown action\n");
1713 }
1714
1715 return 0;
1716 }
1717
1718 /*
1719 * Switch simulator's state.
1720 */
ns_switch_state(struct nandsim * ns)1721 static void ns_switch_state(struct nandsim *ns)
1722 {
1723 if (ns->op) {
1724 /*
1725 * The current operation have already been identified.
1726 * Just follow the states chain.
1727 */
1728
1729 ns->stateidx += 1;
1730 ns->state = ns->nxstate;
1731 ns->nxstate = ns->op[ns->stateidx + 1];
1732
1733 NS_DBG("switch_state: operation is known, switch to the next state, "
1734 "state: %s, nxstate: %s\n",
1735 ns_get_state_name(ns->state),
1736 ns_get_state_name(ns->nxstate));
1737 } else {
1738 /*
1739 * We don't yet know which operation we perform.
1740 * Try to identify it.
1741 */
1742
1743 /*
1744 * The only event causing the switch_state function to
1745 * be called with yet unknown operation is new command.
1746 */
1747 ns->state = ns_get_state_by_command(ns->regs.command);
1748
1749 NS_DBG("switch_state: operation is unknown, try to find it\n");
1750
1751 if (ns_find_operation(ns, 0))
1752 return;
1753 }
1754
1755 /* See, whether we need to do some action */
1756 if ((ns->state & ACTION_MASK) &&
1757 ns_do_state_action(ns, ns->state) < 0) {
1758 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1759 return;
1760 }
1761
1762 /* For 16x devices column means the page offset in words */
1763 if ((ns->nxstate & STATE_ADDR_MASK) && ns->busw == 16) {
1764 NS_DBG("switch_state: double the column number for 16x device\n");
1765 ns->regs.column <<= 1;
1766 }
1767
1768 if (NS_STATE(ns->nxstate) == STATE_READY) {
1769 /*
1770 * The current state is the last. Return to STATE_READY
1771 */
1772
1773 u_char status = NS_STATUS_OK(ns);
1774
1775 /* In case of data states, see if all bytes were input/output */
1776 if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK))
1777 && ns->regs.count != ns->regs.num) {
1778 NS_WARN("switch_state: not all bytes were processed, %d left\n",
1779 ns->regs.num - ns->regs.count);
1780 status = NS_STATUS_FAILED(ns);
1781 }
1782
1783 NS_DBG("switch_state: operation complete, switch to STATE_READY state\n");
1784
1785 ns_switch_to_ready_state(ns, status);
1786
1787 return;
1788 } else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) {
1789 /*
1790 * If the next state is data input/output, switch to it now
1791 */
1792
1793 ns->state = ns->nxstate;
1794 ns->nxstate = ns->op[++ns->stateidx + 1];
1795 ns->regs.num = ns->regs.count = 0;
1796
1797 NS_DBG("switch_state: the next state is data I/O, switch, "
1798 "state: %s, nxstate: %s\n",
1799 ns_get_state_name(ns->state),
1800 ns_get_state_name(ns->nxstate));
1801
1802 /*
1803 * Set the internal register to the count of bytes which
1804 * are expected to be input or output
1805 */
1806 switch (NS_STATE(ns->state)) {
1807 case STATE_DATAIN:
1808 case STATE_DATAOUT:
1809 ns->regs.num = ns->geom.pgszoob - NS_PAGE_BYTE_SHIFT(ns);
1810 break;
1811
1812 case STATE_DATAOUT_ID:
1813 ns->regs.num = ns->geom.idbytes;
1814 break;
1815
1816 case STATE_DATAOUT_STATUS:
1817 ns->regs.count = ns->regs.num = 0;
1818 break;
1819
1820 default:
1821 NS_ERR("switch_state: BUG! unknown data state\n");
1822 }
1823
1824 } else if (ns->nxstate & STATE_ADDR_MASK) {
1825 /*
1826 * If the next state is address input, set the internal
1827 * register to the number of expected address bytes
1828 */
1829
1830 ns->regs.count = 0;
1831
1832 switch (NS_STATE(ns->nxstate)) {
1833 case STATE_ADDR_PAGE:
1834 ns->regs.num = ns->geom.pgaddrbytes;
1835
1836 break;
1837 case STATE_ADDR_SEC:
1838 ns->regs.num = ns->geom.secaddrbytes;
1839 break;
1840
1841 case STATE_ADDR_ZERO:
1842 ns->regs.num = 1;
1843 break;
1844
1845 case STATE_ADDR_COLUMN:
1846 /* Column address is always 2 bytes */
1847 ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
1848 break;
1849
1850 default:
1851 NS_ERR("switch_state: BUG! unknown address state\n");
1852 }
1853 } else {
1854 /*
1855 * Just reset internal counters.
1856 */
1857
1858 ns->regs.num = 0;
1859 ns->regs.count = 0;
1860 }
1861 }
1862
ns_nand_read_byte(struct nand_chip * chip)1863 static u_char ns_nand_read_byte(struct nand_chip *chip)
1864 {
1865 struct nandsim *ns = nand_get_controller_data(chip);
1866 u_char outb = 0x00;
1867
1868 /* Sanity and correctness checks */
1869 if (!ns->lines.ce) {
1870 NS_ERR("read_byte: chip is disabled, return %#x\n", (uint)outb);
1871 return outb;
1872 }
1873 if (ns->lines.ale || ns->lines.cle) {
1874 NS_ERR("read_byte: ALE or CLE pin is high, return %#x\n", (uint)outb);
1875 return outb;
1876 }
1877 if (!(ns->state & STATE_DATAOUT_MASK)) {
1878 NS_WARN("read_byte: unexpected data output cycle, state is %s return %#x\n",
1879 ns_get_state_name(ns->state), (uint)outb);
1880 return outb;
1881 }
1882
1883 /* Status register may be read as many times as it is wanted */
1884 if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS) {
1885 NS_DBG("read_byte: return %#x status\n", ns->regs.status);
1886 return ns->regs.status;
1887 }
1888
1889 /* Check if there is any data in the internal buffer which may be read */
1890 if (ns->regs.count == ns->regs.num) {
1891 NS_WARN("read_byte: no more data to output, return %#x\n", (uint)outb);
1892 return outb;
1893 }
1894
1895 switch (NS_STATE(ns->state)) {
1896 case STATE_DATAOUT:
1897 if (ns->busw == 8) {
1898 outb = ns->buf.byte[ns->regs.count];
1899 ns->regs.count += 1;
1900 } else {
1901 outb = (u_char)cpu_to_le16(ns->buf.word[ns->regs.count >> 1]);
1902 ns->regs.count += 2;
1903 }
1904 break;
1905 case STATE_DATAOUT_ID:
1906 NS_DBG("read_byte: read ID byte %d, total = %d\n", ns->regs.count, ns->regs.num);
1907 outb = ns->ids[ns->regs.count];
1908 ns->regs.count += 1;
1909 break;
1910 default:
1911 BUG();
1912 }
1913
1914 if (ns->regs.count == ns->regs.num) {
1915 NS_DBG("read_byte: all bytes were read\n");
1916
1917 if (NS_STATE(ns->nxstate) == STATE_READY)
1918 ns_switch_state(ns);
1919 }
1920
1921 return outb;
1922 }
1923
ns_nand_write_byte(struct nand_chip * chip,u_char byte)1924 static void ns_nand_write_byte(struct nand_chip *chip, u_char byte)
1925 {
1926 struct nandsim *ns = nand_get_controller_data(chip);
1927
1928 /* Sanity and correctness checks */
1929 if (!ns->lines.ce) {
1930 NS_ERR("write_byte: chip is disabled, ignore write\n");
1931 return;
1932 }
1933 if (ns->lines.ale && ns->lines.cle) {
1934 NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n");
1935 return;
1936 }
1937
1938 if (ns->lines.cle == 1) {
1939 /*
1940 * The byte written is a command.
1941 */
1942
1943 if (byte == NAND_CMD_RESET) {
1944 NS_LOG("reset chip\n");
1945 ns_switch_to_ready_state(ns, NS_STATUS_OK(ns));
1946 return;
1947 }
1948
1949 /* Check that the command byte is correct */
1950 if (ns_check_command(byte)) {
1951 NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
1952 return;
1953 }
1954
1955 if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
1956 || NS_STATE(ns->state) == STATE_DATAOUT) {
1957 int row = ns->regs.row;
1958
1959 ns_switch_state(ns);
1960 if (byte == NAND_CMD_RNDOUT)
1961 ns->regs.row = row;
1962 }
1963
1964 /* Check if chip is expecting command */
1965 if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
1966 /* Do not warn if only 2 id bytes are read */
1967 if (!(ns->regs.command == NAND_CMD_READID &&
1968 NS_STATE(ns->state) == STATE_DATAOUT_ID && ns->regs.count == 2)) {
1969 /*
1970 * We are in situation when something else (not command)
1971 * was expected but command was input. In this case ignore
1972 * previous command(s)/state(s) and accept the last one.
1973 */
1974 NS_WARN("write_byte: command (%#x) wasn't expected, expected state is %s, ignore previous states\n",
1975 (uint)byte,
1976 ns_get_state_name(ns->nxstate));
1977 }
1978 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
1979 }
1980
1981 NS_DBG("command byte corresponding to %s state accepted\n",
1982 ns_get_state_name(ns_get_state_by_command(byte)));
1983 ns->regs.command = byte;
1984 ns_switch_state(ns);
1985
1986 } else if (ns->lines.ale == 1) {
1987 /*
1988 * The byte written is an address.
1989 */
1990
1991 if (NS_STATE(ns->nxstate) == STATE_UNKNOWN) {
1992
1993 NS_DBG("write_byte: operation isn't known yet, identify it\n");
1994
1995 if (ns_find_operation(ns, 1) < 0)
1996 return;
1997
1998 if ((ns->state & ACTION_MASK) &&
1999 ns_do_state_action(ns, ns->state) < 0) {
2000 ns_switch_to_ready_state(ns,
2001 NS_STATUS_FAILED(ns));
2002 return;
2003 }
2004
2005 ns->regs.count = 0;
2006 switch (NS_STATE(ns->nxstate)) {
2007 case STATE_ADDR_PAGE:
2008 ns->regs.num = ns->geom.pgaddrbytes;
2009 break;
2010 case STATE_ADDR_SEC:
2011 ns->regs.num = ns->geom.secaddrbytes;
2012 break;
2013 case STATE_ADDR_ZERO:
2014 ns->regs.num = 1;
2015 break;
2016 default:
2017 BUG();
2018 }
2019 }
2020
2021 /* Check that chip is expecting address */
2022 if (!(ns->nxstate & STATE_ADDR_MASK)) {
2023 NS_ERR("write_byte: address (%#x) isn't expected, expected state is %s, switch to STATE_READY\n",
2024 (uint)byte, ns_get_state_name(ns->nxstate));
2025 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2026 return;
2027 }
2028
2029 /* Check if this is expected byte */
2030 if (ns->regs.count == ns->regs.num) {
2031 NS_ERR("write_byte: no more address bytes expected\n");
2032 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2033 return;
2034 }
2035
2036 ns_accept_addr_byte(ns, byte);
2037
2038 ns->regs.count += 1;
2039
2040 NS_DBG("write_byte: address byte %#x was accepted (%d bytes input, %d expected)\n",
2041 (uint)byte, ns->regs.count, ns->regs.num);
2042
2043 if (ns->regs.count == ns->regs.num) {
2044 NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column);
2045 ns_switch_state(ns);
2046 }
2047
2048 } else {
2049 /*
2050 * The byte written is an input data.
2051 */
2052
2053 /* Check that chip is expecting data input */
2054 if (!(ns->state & STATE_DATAIN_MASK)) {
2055 NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, switch to %s\n",
2056 (uint)byte, ns_get_state_name(ns->state),
2057 ns_get_state_name(STATE_READY));
2058 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2059 return;
2060 }
2061
2062 /* Check if this is expected byte */
2063 if (ns->regs.count == ns->regs.num) {
2064 NS_WARN("write_byte: %u input bytes has already been accepted, ignore write\n",
2065 ns->regs.num);
2066 return;
2067 }
2068
2069 if (ns->busw == 8) {
2070 ns->buf.byte[ns->regs.count] = byte;
2071 ns->regs.count += 1;
2072 } else {
2073 ns->buf.word[ns->regs.count >> 1] = cpu_to_le16((uint16_t)byte);
2074 ns->regs.count += 2;
2075 }
2076 }
2077
2078 return;
2079 }
2080
ns_nand_write_buf(struct nand_chip * chip,const u_char * buf,int len)2081 static void ns_nand_write_buf(struct nand_chip *chip, const u_char *buf,
2082 int len)
2083 {
2084 struct nandsim *ns = nand_get_controller_data(chip);
2085
2086 /* Check that chip is expecting data input */
2087 if (!(ns->state & STATE_DATAIN_MASK)) {
2088 NS_ERR("write_buf: data input isn't expected, state is %s, switch to STATE_READY\n",
2089 ns_get_state_name(ns->state));
2090 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2091 return;
2092 }
2093
2094 /* Check if these are expected bytes */
2095 if (ns->regs.count + len > ns->regs.num) {
2096 NS_ERR("write_buf: too many input bytes\n");
2097 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2098 return;
2099 }
2100
2101 memcpy(ns->buf.byte + ns->regs.count, buf, len);
2102 ns->regs.count += len;
2103
2104 if (ns->regs.count == ns->regs.num) {
2105 NS_DBG("write_buf: %d bytes were written\n", ns->regs.count);
2106 }
2107 }
2108
ns_nand_read_buf(struct nand_chip * chip,u_char * buf,int len)2109 static void ns_nand_read_buf(struct nand_chip *chip, u_char *buf, int len)
2110 {
2111 struct nandsim *ns = nand_get_controller_data(chip);
2112
2113 /* Sanity and correctness checks */
2114 if (!ns->lines.ce) {
2115 NS_ERR("read_buf: chip is disabled\n");
2116 return;
2117 }
2118 if (ns->lines.ale || ns->lines.cle) {
2119 NS_ERR("read_buf: ALE or CLE pin is high\n");
2120 return;
2121 }
2122 if (!(ns->state & STATE_DATAOUT_MASK)) {
2123 NS_WARN("read_buf: unexpected data output cycle, current state is %s\n",
2124 ns_get_state_name(ns->state));
2125 return;
2126 }
2127
2128 if (NS_STATE(ns->state) != STATE_DATAOUT) {
2129 int i;
2130
2131 for (i = 0; i < len; i++)
2132 buf[i] = ns_nand_read_byte(chip);
2133
2134 return;
2135 }
2136
2137 /* Check if these are expected bytes */
2138 if (ns->regs.count + len > ns->regs.num) {
2139 NS_ERR("read_buf: too many bytes to read\n");
2140 ns_switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
2141 return;
2142 }
2143
2144 memcpy(buf, ns->buf.byte + ns->regs.count, len);
2145 ns->regs.count += len;
2146
2147 if (ns->regs.count == ns->regs.num) {
2148 if (NS_STATE(ns->nxstate) == STATE_READY)
2149 ns_switch_state(ns);
2150 }
2151
2152 return;
2153 }
2154
ns_exec_op(struct nand_chip * chip,const struct nand_operation * op,bool check_only)2155 static int ns_exec_op(struct nand_chip *chip, const struct nand_operation *op,
2156 bool check_only)
2157 {
2158 int i;
2159 unsigned int op_id;
2160 const struct nand_op_instr *instr = NULL;
2161 struct nandsim *ns = nand_get_controller_data(chip);
2162
2163 if (check_only) {
2164 /* The current implementation of nandsim needs to know the
2165 * ongoing operation when performing the address cycles. This
2166 * means it cannot make the difference between a regular read
2167 * and a continuous read. Hence, this hack to manually refuse
2168 * supporting sequential cached operations.
2169 */
2170 for (op_id = 0; op_id < op->ninstrs; op_id++) {
2171 instr = &op->instrs[op_id];
2172 if (instr->type == NAND_OP_CMD_INSTR &&
2173 (instr->ctx.cmd.opcode == NAND_CMD_READCACHEEND ||
2174 instr->ctx.cmd.opcode == NAND_CMD_READCACHESEQ))
2175 return -EOPNOTSUPP;
2176 }
2177
2178 return 0;
2179 }
2180
2181 ns->lines.ce = 1;
2182
2183 for (op_id = 0; op_id < op->ninstrs; op_id++) {
2184 instr = &op->instrs[op_id];
2185 ns->lines.cle = 0;
2186 ns->lines.ale = 0;
2187
2188 switch (instr->type) {
2189 case NAND_OP_CMD_INSTR:
2190 ns->lines.cle = 1;
2191 ns_nand_write_byte(chip, instr->ctx.cmd.opcode);
2192 break;
2193 case NAND_OP_ADDR_INSTR:
2194 ns->lines.ale = 1;
2195 for (i = 0; i < instr->ctx.addr.naddrs; i++)
2196 ns_nand_write_byte(chip, instr->ctx.addr.addrs[i]);
2197 break;
2198 case NAND_OP_DATA_IN_INSTR:
2199 ns_nand_read_buf(chip, instr->ctx.data.buf.in, instr->ctx.data.len);
2200 break;
2201 case NAND_OP_DATA_OUT_INSTR:
2202 ns_nand_write_buf(chip, instr->ctx.data.buf.out, instr->ctx.data.len);
2203 break;
2204 case NAND_OP_WAITRDY_INSTR:
2205 /* we are always ready */
2206 break;
2207 }
2208 }
2209
2210 return 0;
2211 }
2212
ns_attach_chip(struct nand_chip * chip)2213 static int ns_attach_chip(struct nand_chip *chip)
2214 {
2215 unsigned int eccsteps, eccbytes;
2216
2217 chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
2218 chip->ecc.algo = bch ? NAND_ECC_ALGO_BCH : NAND_ECC_ALGO_HAMMING;
2219
2220 if (!bch)
2221 return 0;
2222
2223 if (!IS_ENABLED(CONFIG_MTD_NAND_ECC_SW_BCH)) {
2224 NS_ERR("BCH ECC support is disabled\n");
2225 return -EINVAL;
2226 }
2227
2228 /* Use 512-byte ecc blocks */
2229 eccsteps = nsmtd->writesize / 512;
2230 eccbytes = ((bch * 13) + 7) / 8;
2231
2232 /* Do not bother supporting small page devices */
2233 if (nsmtd->oobsize < 64 || !eccsteps) {
2234 NS_ERR("BCH not available on small page devices\n");
2235 return -EINVAL;
2236 }
2237
2238 if (((eccbytes * eccsteps) + 2) > nsmtd->oobsize) {
2239 NS_ERR("Invalid BCH value %u\n", bch);
2240 return -EINVAL;
2241 }
2242
2243 chip->ecc.size = 512;
2244 chip->ecc.strength = bch;
2245 chip->ecc.bytes = eccbytes;
2246
2247 NS_INFO("Using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
2248
2249 return 0;
2250 }
2251
2252 static const struct nand_controller_ops ns_controller_ops = {
2253 .attach_chip = ns_attach_chip,
2254 .exec_op = ns_exec_op,
2255 };
2256
2257 /*
2258 * Module initialization function
2259 */
ns_init_module(void)2260 static int __init ns_init_module(void)
2261 {
2262 struct list_head *pos, *n;
2263 struct nand_chip *chip;
2264 struct nandsim *ns;
2265 int ret;
2266
2267 if (bus_width != 8 && bus_width != 16) {
2268 NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
2269 return -EINVAL;
2270 }
2271
2272 ns = kzalloc(sizeof(struct nandsim), GFP_KERNEL);
2273 if (!ns) {
2274 NS_ERR("unable to allocate core structures.\n");
2275 return -ENOMEM;
2276 }
2277 chip = &ns->chip;
2278 nsmtd = nand_to_mtd(chip);
2279 nand_set_controller_data(chip, (void *)ns);
2280
2281 /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
2282 /* and 'badblocks' parameters to work */
2283 chip->options |= NAND_SKIP_BBTSCAN;
2284
2285 switch (bbt) {
2286 case 2:
2287 chip->bbt_options |= NAND_BBT_NO_OOB;
2288 fallthrough;
2289 case 1:
2290 chip->bbt_options |= NAND_BBT_USE_FLASH;
2291 fallthrough;
2292 case 0:
2293 break;
2294 default:
2295 NS_ERR("bbt has to be 0..2\n");
2296 ret = -EINVAL;
2297 goto free_ns_struct;
2298 }
2299 /*
2300 * Perform minimum nandsim structure initialization to handle
2301 * the initial ID read command correctly
2302 */
2303 if (id_bytes[6] != 0xFF || id_bytes[7] != 0xFF)
2304 ns->geom.idbytes = 8;
2305 else if (id_bytes[4] != 0xFF || id_bytes[5] != 0xFF)
2306 ns->geom.idbytes = 6;
2307 else if (id_bytes[2] != 0xFF || id_bytes[3] != 0xFF)
2308 ns->geom.idbytes = 4;
2309 else
2310 ns->geom.idbytes = 2;
2311 ns->regs.status = NS_STATUS_OK(ns);
2312 ns->nxstate = STATE_UNKNOWN;
2313 ns->options |= OPT_PAGE512; /* temporary value */
2314 memcpy(ns->ids, id_bytes, sizeof(ns->ids));
2315 if (bus_width == 16) {
2316 ns->busw = 16;
2317 chip->options |= NAND_BUSWIDTH_16;
2318 }
2319
2320 nsmtd->owner = THIS_MODULE;
2321
2322 ret = ns_parse_weakblocks();
2323 if (ret)
2324 goto free_ns_struct;
2325
2326 ret = ns_parse_weakpages();
2327 if (ret)
2328 goto free_wb_list;
2329
2330 ret = ns_parse_gravepages();
2331 if (ret)
2332 goto free_wp_list;
2333
2334 nand_controller_init(&ns->base);
2335 ns->base.ops = &ns_controller_ops;
2336 chip->controller = &ns->base;
2337
2338 ret = nand_scan(chip, 1);
2339 if (ret) {
2340 NS_ERR("Could not scan NAND Simulator device\n");
2341 goto free_gp_list;
2342 }
2343
2344 if (overridesize) {
2345 uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize;
2346 struct nand_memory_organization *memorg;
2347 u64 targetsize;
2348
2349 memorg = nanddev_get_memorg(&chip->base);
2350
2351 if (new_size >> overridesize != nsmtd->erasesize) {
2352 NS_ERR("overridesize is too big\n");
2353 ret = -EINVAL;
2354 goto cleanup_nand;
2355 }
2356
2357 /* N.B. This relies on nand_scan not doing anything with the size before we change it */
2358 nsmtd->size = new_size;
2359 memorg->eraseblocks_per_lun = 1 << overridesize;
2360 targetsize = nanddev_target_size(&chip->base);
2361 chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
2362 chip->pagemask = (targetsize >> chip->page_shift) - 1;
2363 }
2364
2365 ret = ns_setup_wear_reporting(nsmtd);
2366 if (ret)
2367 goto cleanup_nand;
2368
2369 ret = ns_init(nsmtd);
2370 if (ret)
2371 goto free_ebw;
2372
2373 ret = nand_create_bbt(chip);
2374 if (ret)
2375 goto free_ns_object;
2376
2377 ret = ns_parse_badblocks(ns, nsmtd);
2378 if (ret)
2379 goto free_ns_object;
2380
2381 /* Register NAND partitions */
2382 ret = mtd_device_register(nsmtd, &ns->partitions[0], ns->nbparts);
2383 if (ret)
2384 goto free_ns_object;
2385
2386 ret = ns_debugfs_create(ns);
2387 if (ret)
2388 goto unregister_mtd;
2389
2390 return 0;
2391
2392 unregister_mtd:
2393 WARN_ON(mtd_device_unregister(nsmtd));
2394 free_ns_object:
2395 ns_free(ns);
2396 free_ebw:
2397 kfree(erase_block_wear);
2398 cleanup_nand:
2399 nand_cleanup(chip);
2400 free_gp_list:
2401 list_for_each_safe(pos, n, &grave_pages) {
2402 list_del(pos);
2403 kfree(list_entry(pos, struct grave_page, list));
2404 }
2405 free_wp_list:
2406 list_for_each_safe(pos, n, &weak_pages) {
2407 list_del(pos);
2408 kfree(list_entry(pos, struct weak_page, list));
2409 }
2410 free_wb_list:
2411 list_for_each_safe(pos, n, &weak_blocks) {
2412 list_del(pos);
2413 kfree(list_entry(pos, struct weak_block, list));
2414 }
2415 free_ns_struct:
2416 kfree(ns);
2417
2418 return ret;
2419 }
2420
2421 module_init(ns_init_module);
2422
2423 /*
2424 * Module clean-up function
2425 */
ns_cleanup_module(void)2426 static void __exit ns_cleanup_module(void)
2427 {
2428 struct nand_chip *chip = mtd_to_nand(nsmtd);
2429 struct nandsim *ns = nand_get_controller_data(chip);
2430 struct list_head *pos, *n;
2431
2432 ns_debugfs_remove(ns);
2433 WARN_ON(mtd_device_unregister(nsmtd));
2434 ns_free(ns);
2435 kfree(erase_block_wear);
2436 nand_cleanup(chip);
2437
2438 list_for_each_safe(pos, n, &grave_pages) {
2439 list_del(pos);
2440 kfree(list_entry(pos, struct grave_page, list));
2441 }
2442
2443 list_for_each_safe(pos, n, &weak_pages) {
2444 list_del(pos);
2445 kfree(list_entry(pos, struct weak_page, list));
2446 }
2447
2448 list_for_each_safe(pos, n, &weak_blocks) {
2449 list_del(pos);
2450 kfree(list_entry(pos, struct weak_block, list));
2451 }
2452
2453 kfree(ns);
2454 }
2455
2456 module_exit(ns_cleanup_module);
2457
2458 MODULE_LICENSE ("GPL");
2459 MODULE_AUTHOR ("Artem B. Bityuckiy");
2460 MODULE_DESCRIPTION ("The NAND flash simulator");
2461