1# SPDX-License-Identifier: GPL-2.0-only
2
3#
4# Light sensors
5#
6# When adding new entries keep the list in alphabetical order
7
8menu "Light sensors"
9
10config ACPI_ALS
11	tristate "ACPI Ambient Light Sensor"
12	depends on ACPI
13	select IIO_BUFFER
14	select IIO_TRIGGERED_BUFFER
15	select IIO_KFIFO_BUF
16	help
17	  Say Y here if you want to build a driver for the ACPI0008
18	  Ambient Light Sensor.
19
20	  To compile this driver as a module, choose M here: the module will
21	  be called acpi-als.
22
23config ADJD_S311
24	tristate "ADJD-S311-CR999 digital color sensor"
25	select IIO_BUFFER
26	select IIO_TRIGGERED_BUFFER
27	depends on I2C
28	help
29	  If you say yes here you get support for the Avago ADJD-S311-CR999
30	  digital color light sensor.
31
32	  This driver can also be built as a module.  If so, the module
33	  will be called adjd_s311.
34
35config ADUX1020
36	tristate "ADUX1020 photometric sensor"
37	select REGMAP_I2C
38	depends on I2C
39	help
40	 Say Y here if you want to build a driver for the Analog Devices
41	 ADUX1020 photometric sensor.
42
43	 To compile this driver as a module, choose M here: the
44	 module will be called adux1020.
45
46config AL3010
47	tristate "AL3010 ambient light sensor"
48	depends on I2C
49	help
50	  Say Y here if you want to build a driver for the Dyna Image AL3010
51	  ambient light sensor.
52
53	  To compile this driver as a module, choose M here: the
54	  module will be called al3010.
55
56config AL3320A
57	tristate "AL3320A ambient light sensor"
58	depends on I2C
59	help
60	  Say Y here if you want to build a driver for the Dyna Image AL3320A
61	  ambient light sensor.
62
63	  To compile this driver as a module, choose M here: the
64	  module will be called al3320a.
65
66config APDS9300
67	tristate "APDS9300 ambient light sensor"
68	depends on I2C
69	help
70	  Say Y here if you want to build a driver for the Avago APDS9300
71	  ambient light sensor.
72
73	  To compile this driver as a module, choose M here: the
74	  module will be called apds9300.
75
76config APDS9960
77	tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
78	select REGMAP_I2C
79	select IIO_BUFFER
80	select IIO_KFIFO_BUF
81	depends on I2C
82	help
83	  Say Y here to build I2C interface support for the Avago
84	  APDS9960 gesture/RGB/ALS/proximity sensor.
85
86	  To compile this driver as a module, choose M here: the
87	  module will be called apds9960
88
89config AS73211
90	tristate "AMS AS73211 XYZ color sensor"
91	depends on I2C
92	select IIO_BUFFER
93	select IIO_TRIGGERED_BUFFER
94	help
95	 If you say yes here you get support for the AMS AS73211
96	 JENCOLOR(R) Digital XYZ Sensor.
97
98	 For triggered measurements, you will need an additional trigger driver
99	 like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER.
100
101	 This driver can also be built as a module.  If so, the module
102	 will be called as73211.
103
104config BH1750
105	tristate "ROHM BH1750 ambient light sensor"
106	depends on I2C
107	help
108	  Say Y here to build support for the ROHM BH1710, BH1715, BH1721,
109	  BH1750, BH1751 ambient light sensors.
110
111	  To compile this driver as a module, choose M here: the module will
112	  be called bh1750.
113
114config BH1780
115	tristate "ROHM BH1780 ambient light sensor"
116	depends on I2C
117	help
118	  Say Y here to build support for the ROHM BH1780GLI ambient
119	  light sensor.
120
121	  To compile this driver as a module, choose M here: the module will
122	  be called bh1780.
123
124config CM32181
125	depends on I2C
126	tristate "CM32181 driver"
127	help
128	  Say Y here if you use cm32181.
129	  This option enables ambient light sensor using
130	  Capella cm32181 device driver.
131
132	  To compile this driver as a module, choose M here:
133	  the module will be called cm32181.
134
135config CM3232
136	depends on I2C
137	tristate "CM3232 ambient light sensor"
138	help
139	  Say Y here if you use cm3232.
140	  This option enables ambient light sensor using
141	  Capella Microsystems cm3232 device driver.
142
143	  To compile this driver as a module, choose M here:
144	  the module will be called cm3232.
145
146config CM3323
147	depends on I2C
148	tristate "Capella CM3323 color light sensor"
149	help
150	  Say Y here if you want to build a driver for Capella CM3323
151	  color sensor.
152
153	  To compile this driver as a module, choose M here: the module will
154	  be called cm3323.
155
156config CM3605
157	tristate "Capella CM3605 ambient light and proximity sensor"
158	help
159	  Say Y here if you want to build a driver for Capella CM3605
160	  ambient light and short range proximity sensor.
161
162	  To compile this driver as a module, choose M here: the module will
163	  be called cm3605.
164
165config CM36651
166	depends on I2C
167	tristate "CM36651 driver"
168	help
169	  Say Y here if you use cm36651.
170	  This option enables proximity & RGB sensor using
171	  Capella cm36651 device driver.
172
173	  To compile this driver as a module, choose M here:
174	  the module will be called cm36651.
175
176config IIO_CROS_EC_LIGHT_PROX
177	tristate "ChromeOS EC Light and Proximity Sensors"
178	depends on IIO_CROS_EC_SENSORS_CORE
179	help
180	  Say Y here if you use the light and proximity sensors
181	  presented by the ChromeOS EC Sensor hub.
182
183	  To compile this driver as a module, choose M here:
184	  the module will be called cros_ec_light_prox.
185
186config GP2AP002
187	tristate "Sharp GP2AP002 Proximity/ALS sensor"
188	depends on I2C
189	select REGMAP
190	help
191	  Say Y here if you have a Sharp GP2AP002 proximity/ALS combo-chip
192	  hooked to an I2C bus.
193
194	  To compile this driver as a module, choose M here: the
195	  module will be called gp2ap002.
196
197config GP2AP020A00F
198	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
199	depends on I2C
200	select REGMAP_I2C
201	select IIO_BUFFER
202	select IIO_TRIGGERED_BUFFER
203	select IRQ_WORK
204	help
205	  Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
206	  hooked to an I2C bus.
207
208	  To compile this driver as a module, choose M here: the
209	  module will be called gp2ap020a00f.
210
211config IQS621_ALS
212	tristate "Azoteq IQS621/622 ambient light sensors"
213	depends on MFD_IQS62X || COMPILE_TEST
214	help
215	  Say Y here if you want to build support for the Azoteq IQS621
216	  and IQS622 ambient light sensors.
217
218	  To compile this driver as a module, choose M here: the module
219	  will be called iqs621-als.
220
221config SENSORS_ISL29018
222	tristate "Intersil 29018 light and proximity sensor"
223	depends on I2C
224	select REGMAP_I2C
225	default n
226	help
227	  If you say yes here you get support for ambient light sensing and
228	  proximity infrared sensing from Intersil ISL29018.
229	  This driver will provide the measurements of ambient light intensity
230	  in lux, proximity infrared sensing and normal infrared sensing.
231	  Data from sensor is accessible via sysfs.
232
233config SENSORS_ISL29028
234	tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor"
235	depends on I2C
236	select REGMAP_I2C
237	help
238	  Provides driver for the Intersil's ISL29028 device.
239	  This driver supports the sysfs interface to get the ALS, IR intensity,
240	  Proximity value via iio. The ISL29028 provides the concurrent sensing
241	  of ambient light and proximity.
242
243config ISL29125
244	tristate "Intersil ISL29125 digital color light sensor"
245	depends on I2C
246	select IIO_BUFFER
247	select IIO_TRIGGERED_BUFFER
248	help
249	  Say Y here if you want to build a driver for the Intersil ISL29125
250	  RGB light sensor for I2C.
251
252	  To compile this driver as a module, choose M here: the module will be
253	  called isl29125.
254
255config HID_SENSOR_ALS
256	depends on HID_SENSOR_HUB
257	select IIO_BUFFER
258	select HID_SENSOR_IIO_COMMON
259	select HID_SENSOR_IIO_TRIGGER
260	tristate "HID ALS"
261	help
262	  Say yes here to build support for the HID SENSOR
263	  Ambient light sensor.
264
265	  To compile this driver as a module, choose M here: the
266	  module will be called hid-sensor-als.
267
268config HID_SENSOR_PROX
269	depends on HID_SENSOR_HUB
270	select IIO_BUFFER
271	select HID_SENSOR_IIO_COMMON
272	select HID_SENSOR_IIO_TRIGGER
273	tristate "HID PROX"
274	help
275	  Say yes here to build support for the HID SENSOR
276	  Proximity sensor.
277
278	  To compile this driver as a module, choose M here: the
279	  module will be called hid-sensor-prox.
280
281config JSA1212
282	tristate "JSA1212 ALS and proximity sensor driver"
283	depends on I2C
284	select REGMAP_I2C
285	help
286	  Say Y here if you want to build a IIO driver for JSA1212
287	  proximity & ALS sensor device.
288
289	  To compile this driver as a module, choose M here:
290	  the module will be called jsa1212.
291
292config ROHM_BU27008
293	tristate "ROHM BU27008 color (RGB+C/IR) sensor"
294	depends on I2C
295	select REGMAP_I2C
296	select IIO_GTS_HELPER
297	help
298	  Enable support for the ROHM BU27008 color sensor.
299	  The ROHM BU27008 is a sensor with 5 photodiodes (red, green,
300	  blue, clear and IR) with four configurable channels. Red and
301	  green being always available and two out of the rest three
302	  (blue, clear, IR) can be selected to be simultaneously measured.
303	  Typical application is adjusting LCD backlight of TVs,
304	  mobile phones and tablet PCs.
305
306config ROHM_BU27034
307	tristate "ROHM BU27034 ambient light sensor"
308	depends on I2C
309	select REGMAP_I2C
310	select IIO_GTS_HELPER
311	select IIO_BUFFER
312	select IIO_KFIFO_BUF
313	help
314	  Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034
315	  is an ambient light sesnor with 3 channels and 3 photo diodes capable
316	  of detecting a very wide range of illuminance.
317	  Typical application is adjusting LCD and backlight power of TVs and
318	  mobile phones.
319
320config RPR0521
321	tristate "ROHM RPR0521 ALS and proximity sensor driver"
322	depends on I2C
323	select REGMAP_I2C
324	select IIO_BUFFER
325	select IIO_TRIGGERED_BUFFER
326	help
327	  Say Y here if you want to build support for ROHM's RPR0521
328	  ambient light and proximity sensor device.
329
330	  To compile this driver as a module, choose M here:
331	  the module will be called rpr0521.
332
333config SENSORS_LM3533
334	tristate "LM3533 ambient light sensor"
335	depends on MFD_LM3533
336	help
337	  If you say yes here you get support for the ambient light sensor
338	  interface on National Semiconductor / TI LM3533 Lighting Power
339	  chips.
340
341	  The sensor interface can be used to control the LEDs and backlights
342	  of the chip through defining five light zones and three sets of
343	  corresponding output-current values.
344
345	  The driver provides raw and mean adc readings along with the current
346	  light zone through sysfs. A threshold event can be generated on zone
347	  changes. The ALS-control output values can be set per zone for the
348	  three current output channels.
349
350config LTR501
351	tristate "LTR-501ALS-01 light sensor"
352	depends on I2C
353	select REGMAP_I2C
354	select IIO_BUFFER
355	select IIO_TRIGGERED_BUFFER
356	help
357	  If you say yes here you get support for the Lite-On LTR-501ALS-01
358	  ambient light and proximity sensor. This driver also supports LTR-559
359	  ALS/PS or LTR-301 ALS sensors.
360
361	  This driver can also be built as a module.  If so, the module
362	  will be called ltr501.
363
364config LTRF216A
365	tristate "Liteon LTRF216A Light Sensor"
366	depends on I2C
367	select REGMAP_I2C
368	help
369	  If you say Y or M here, you get support for Liteon LTRF216A
370	  Ambient Light Sensor.
371
372	  If built as a dynamically linked module, it will be called
373	  ltrf216a.
374
375config LV0104CS
376	tristate "LV0104CS Ambient Light Sensor"
377	depends on I2C
378	help
379	  Say Y here if you want to build support for the On Semiconductor
380	  LV0104CS ambient light sensor.
381
382	  To compile this driver as a module, choose M here:
383	  the module will be called lv0104cs.
384
385config MAX44000
386	tristate "MAX44000 Ambient and Infrared Proximity Sensor"
387	depends on I2C
388	select REGMAP_I2C
389	select IIO_BUFFER
390	select IIO_TRIGGERED_BUFFER
391	help
392	  Say Y here if you want to build support for Maxim Integrated's
393	  MAX44000 ambient and infrared proximity sensor device.
394
395	  To compile this driver as a module, choose M here:
396	  the module will be called max44000.
397
398config MAX44009
399	tristate "MAX44009 Ambient Light Sensor"
400	depends on I2C
401	select REGMAP_I2C
402	help
403	 Say Y here if you want to build support for Maxim Integrated's
404	 MAX44009 ambient light sensor device.
405
406	 To compile this driver as a module, choose M here:
407	 the module will be called max44009.
408
409config NOA1305
410	tristate "ON Semiconductor NOA1305 ambient light sensor"
411	depends on I2C
412	select REGMAP_I2C
413	help
414	 Say Y here if you want to build support for the ON Semiconductor
415	 NOA1305 ambient light sensor.
416
417	 To compile this driver as a module, choose M here:
418	 The module will be called noa1305.
419
420config OPT3001
421	tristate "Texas Instruments OPT3001 Light Sensor"
422	depends on I2C
423	help
424	  If you say Y or M here, you get support for Texas Instruments
425	  OPT3001 Ambient Light Sensor.
426
427	  If built as a dynamically linked module, it will be called
428	  opt3001.
429
430config OPT4001
431	tristate "Texas Instruments OPT4001 Light Sensor"
432	depends on I2C
433	select REGMAP_I2C
434	help
435	  If you say Y or M here, you get support for Texas Instruments
436	  OPT4001 Ambient Light Sensor.
437
438	  If built as a dynamically linked module, it will be called
439	  opt4001.
440
441config PA12203001
442	tristate "TXC PA12203001 light and proximity sensor"
443	depends on I2C
444	select REGMAP_I2C
445	help
446	  If you say yes here you get support for the TXC PA12203001
447	  ambient light and proximity sensor.
448
449	  This driver can also be built as a module.  If so, the module
450	  will be called pa12203001.
451
452config SI1133
453	tristate "SI1133 UV Index Sensor and Ambient Light Sensor"
454	depends on I2C
455	select REGMAP_I2C
456	  help
457	  Say Y here if you want to build a driver for the Silicon Labs SI1133
458	  UV Index Sensor and Ambient Light Sensor chip.
459
460	  To compile this driver as a module, choose M here: the module will be
461	  called si1133.
462
463config SI1145
464	tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor"
465	depends on I2C
466	select IIO_BUFFER
467	select IIO_TRIGGERED_BUFFER
468	help
469	  Say Y here if you want to build a driver for the Silicon Labs SI1132 or
470	  SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor
471	  chips.
472
473	  To compile this driver as a module, choose M here: the module will be
474	  called si1145.
475
476config STK3310
477	tristate "STK3310 ALS and proximity sensor"
478	depends on I2C
479	select REGMAP_I2C
480	help
481	  Say yes here to get support for the Sensortek STK3310 ambient light
482	  and proximity sensor. The STK3311 model is also supported by this
483	  driver.
484
485	  Choosing M will build the driver as a module. If so, the module
486	  will be called stk3310.
487
488config ST_UVIS25
489	tristate "STMicroelectronics UVIS25 sensor driver"
490	depends on (I2C || SPI)
491	select IIO_BUFFER
492	select IIO_TRIGGERED_BUFFER
493	select ST_UVIS25_I2C if (I2C)
494	select ST_UVIS25_SPI if (SPI_MASTER)
495	help
496	  Say yes here to build support for STMicroelectronics UVIS25
497	  uv sensor
498
499	  To compile this driver as a module, choose M here: the module
500	  will be called st_uvis25.
501
502config ST_UVIS25_I2C
503	tristate
504	depends on ST_UVIS25
505	select REGMAP_I2C
506
507config ST_UVIS25_SPI
508	tristate
509	depends on ST_UVIS25
510	select REGMAP_SPI
511
512config TCS3414
513	tristate "TAOS TCS3414 digital color sensor"
514	depends on I2C
515	select IIO_BUFFER
516	select IIO_TRIGGERED_BUFFER
517	help
518	  If you say yes here you get support for the TAOS TCS3414
519	  family of digital color sensors.
520
521	  This driver can also be built as a module.  If so, the module
522	  will be called tcs3414.
523
524config TCS3472
525	tristate "TAOS TCS3472 color light-to-digital converter"
526	depends on I2C
527	select IIO_BUFFER
528	select IIO_TRIGGERED_BUFFER
529	help
530	  If you say yes here you get support for the TAOS TCS3472
531	  family of color light-to-digital converters with IR filter.
532
533	  This driver can also be built as a module.  If so, the module
534	  will be called tcs3472.
535
536config SENSORS_TSL2563
537	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
538	depends on I2C
539	help
540	  If you say yes here you get support for the Taos TSL2560,
541	  TSL2561, TSL2562 and TSL2563 ambient light sensors.
542
543	  This driver can also be built as a module.  If so, the module
544	  will be called tsl2563.
545
546config TSL2583
547	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
548	depends on I2C
549	help
550	  Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices.
551	  Access ALS data via iio, sysfs.
552
553config TSL2591
554        tristate "TAOS TSL2591 ambient light sensor"
555        depends on I2C
556        help
557          Select Y here for support of the AMS/TAOS TSL2591 ambient light sensor,
558          featuring channels for combined visible + IR intensity and lux illuminance.
559          Access data via iio and sysfs. Supports iio_events.
560
561          To compile this driver as a module, select M: the
562          module will be called tsl2591.
563
564config TSL2772
565	tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors"
566	depends on I2C
567	help
568	  Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672,
569	  tmd2672, tsl2772, tmd2772 devices.
570	  Provides iio_events and direct access via sysfs.
571
572config TSL4531
573	tristate "TAOS TSL4531 ambient light sensors"
574	depends on I2C
575	help
576	  Say Y here if you want to build a driver for the TAOS TSL4531 family
577	  of ambient light sensors with direct lux output.
578
579	  To compile this driver as a module, choose M here: the
580	  module will be called tsl4531.
581
582config US5182D
583	tristate "UPISEMI light and proximity sensor"
584	depends on I2C
585	help
586	  If you say yes here you get support for the UPISEMI US5182D
587	  ambient light and proximity sensor.
588
589	  This driver can also be built as a module.  If so, the module
590	  will be called us5182d.
591
592config VCNL4000
593	tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor"
594	select IIO_BUFFER
595	select IIO_TRIGGERED_BUFFER
596	depends on I2C
597	help
598	  Say Y here if you want to build a driver for the Vishay VCNL4000,
599	  VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity
600	  sensor.
601
602	  To compile this driver as a module, choose M here: the
603	  module will be called vcnl4000.
604
605config VCNL4035
606	tristate "VCNL4035 combined ALS and proximity sensor"
607	select IIO_BUFFER
608	select IIO_TRIGGERED_BUFFER
609	select REGMAP_I2C
610	depends on I2C
611	help
612	  Say Y here if you want to build a driver for the Vishay VCNL4035,
613	  combined ambient light (ALS) and proximity sensor. Currently only ALS
614	  function is available.
615
616	  To compile this driver as a module, choose M here: the
617	  module will be called vcnl4035.
618
619config VEML6030
620	tristate "VEML6030 ambient light sensor"
621	select REGMAP_I2C
622	depends on I2C
623	help
624	  Say Y here if you want to build a driver for the Vishay VEML6030
625	  ambient light sensor (ALS).
626
627	  To compile this driver as a module, choose M here: the
628	  module will be called veml6030.
629
630config VEML6070
631	tristate "VEML6070 UV A light sensor"
632	depends on I2C
633	help
634	  Say Y here if you want to build a driver for the Vishay VEML6070 UV A
635	  light sensor.
636
637	  To compile this driver as a module, choose M here: the
638	  module will be called veml6070.
639
640config VL6180
641	tristate "VL6180 ALS, range and proximity sensor"
642	depends on I2C
643	help
644	  Say Y here if you want to build a driver for the STMicroelectronics
645	  VL6180 combined ambient light, range and proximity sensor.
646
647	  To compile this driver as a module, choose M here: the
648	  module will be called vl6180.
649
650config ZOPT2201
651	tristate "ZOPT2201 ALS and UV B sensor"
652	depends on I2C
653	help
654	  Say Y here if you want to build a driver for the IDT
655	  ZOPT2201 ambient light and UV B sensor.
656
657	  To compile this driver as a module, choose M here: the
658	  module will be called zopt2201.
659
660endmenu
661