1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * w83627ehf - Driver for the hardware monitoring functionality of
4 * the Winbond W83627EHF Super-I/O chip
5 * Copyright (C) 2005-2012 Jean Delvare <jdelvare@suse.de>
6 * Copyright (C) 2006 Yuan Mu (Winbond),
7 * Rudolf Marek <r.marek@assembler.cz>
8 * David Hubbard <david.c.hubbard@gmail.com>
9 * Daniel J Blueman <daniel.blueman@gmail.com>
10 * Copyright (C) 2010 Sheng-Yuan Huang (Nuvoton) (PS00)
11 *
12 * Shamelessly ripped from the w83627hf driver
13 * Copyright (C) 2003 Mark Studebaker
14 *
15 * Thanks to Leon Moonen, Steve Cliffe and Grant Coady for their help
16 * in testing and debugging this driver.
17 *
18 * This driver also supports the W83627EHG, which is the lead-free
19 * version of the W83627EHF.
20 *
21 * Supports the following chips:
22 *
23 * Chip #vin #fan #pwm #temp chip IDs man ID
24 * w83627ehf 10 5 4 3 0x8850 0x88 0x5ca3
25 * 0x8860 0xa1
26 * w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
27 * w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3
28 * w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3
29 * w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
30 * w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3
31 */
32
33 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
34
35 #include <linux/module.h>
36 #include <linux/init.h>
37 #include <linux/slab.h>
38 #include <linux/jiffies.h>
39 #include <linux/platform_device.h>
40 #include <linux/hwmon.h>
41 #include <linux/hwmon-sysfs.h>
42 #include <linux/hwmon-vid.h>
43 #include <linux/err.h>
44 #include <linux/mutex.h>
45 #include <linux/acpi.h>
46 #include <linux/io.h>
47 #include "lm75.h"
48
49 enum kinds {
50 w83627ehf, w83627dhg, w83627dhg_p, w83627uhg,
51 w83667hg, w83667hg_b,
52 };
53
54 /* used to set data->name = w83627ehf_device_names[data->sio_kind] */
55 static const char * const w83627ehf_device_names[] = {
56 "w83627ehf",
57 "w83627dhg",
58 "w83627dhg",
59 "w83627uhg",
60 "w83667hg",
61 "w83667hg",
62 };
63
64 static unsigned short force_id;
65 module_param(force_id, ushort, 0);
66 MODULE_PARM_DESC(force_id, "Override the detected device ID");
67
68 #define DRVNAME "w83627ehf"
69
70 /*
71 * Super-I/O constants and functions
72 */
73
74 #define W83627EHF_LD_HWM 0x0b
75 #define W83667HG_LD_VID 0x0d
76
77 #define SIO_REG_LDSEL 0x07 /* Logical device select */
78 #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
79 #define SIO_REG_EN_VRM10 0x2C /* GPIO3, GPIO4 selection */
80 #define SIO_REG_ENABLE 0x30 /* Logical device enable */
81 #define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
82 #define SIO_REG_VID_CTRL 0xF0 /* VID control */
83 #define SIO_REG_VID_DATA 0xF1 /* VID data */
84
85 #define SIO_W83627EHF_ID 0x8850
86 #define SIO_W83627EHG_ID 0x8860
87 #define SIO_W83627DHG_ID 0xa020
88 #define SIO_W83627DHG_P_ID 0xb070
89 #define SIO_W83627UHG_ID 0xa230
90 #define SIO_W83667HG_ID 0xa510
91 #define SIO_W83667HG_B_ID 0xb350
92 #define SIO_ID_MASK 0xFFF0
93
94 static inline void
superio_outb(int ioreg,int reg,int val)95 superio_outb(int ioreg, int reg, int val)
96 {
97 outb(reg, ioreg);
98 outb(val, ioreg + 1);
99 }
100
101 static inline int
superio_inb(int ioreg,int reg)102 superio_inb(int ioreg, int reg)
103 {
104 outb(reg, ioreg);
105 return inb(ioreg + 1);
106 }
107
108 static inline void
superio_select(int ioreg,int ld)109 superio_select(int ioreg, int ld)
110 {
111 outb(SIO_REG_LDSEL, ioreg);
112 outb(ld, ioreg + 1);
113 }
114
115 static inline int
superio_enter(int ioreg)116 superio_enter(int ioreg)
117 {
118 if (!request_muxed_region(ioreg, 2, DRVNAME))
119 return -EBUSY;
120
121 outb(0x87, ioreg);
122 outb(0x87, ioreg);
123
124 return 0;
125 }
126
127 static inline void
superio_exit(int ioreg)128 superio_exit(int ioreg)
129 {
130 outb(0xaa, ioreg);
131 outb(0x02, ioreg);
132 outb(0x02, ioreg + 1);
133 release_region(ioreg, 2);
134 }
135
136 /*
137 * ISA constants
138 */
139
140 #define IOREGION_ALIGNMENT (~7)
141 #define IOREGION_OFFSET 5
142 #define IOREGION_LENGTH 2
143 #define ADDR_REG_OFFSET 0
144 #define DATA_REG_OFFSET 1
145
146 #define W83627EHF_REG_BANK 0x4E
147 #define W83627EHF_REG_CONFIG 0x40
148
149 /*
150 * Not currently used:
151 * REG_MAN_ID has the value 0x5ca3 for all supported chips.
152 * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
153 * REG_MAN_ID is at port 0x4f
154 * REG_CHIP_ID is at port 0x58
155 */
156
157 static const u16 W83627EHF_REG_FAN[] = { 0x28, 0x29, 0x2a, 0x3f, 0x553 };
158 static const u16 W83627EHF_REG_FAN_MIN[] = { 0x3b, 0x3c, 0x3d, 0x3e, 0x55c };
159
160 /* The W83627EHF registers for nr=7,8,9 are in bank 5 */
161 #define W83627EHF_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
162 (0x554 + (((nr) - 7) * 2)))
163 #define W83627EHF_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
164 (0x555 + (((nr) - 7) * 2)))
165 #define W83627EHF_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
166 (0x550 + (nr) - 7))
167
168 static const u16 W83627EHF_REG_TEMP[] = { 0x27, 0x150, 0x250, 0x7e };
169 static const u16 W83627EHF_REG_TEMP_HYST[] = { 0x3a, 0x153, 0x253, 0 };
170 static const u16 W83627EHF_REG_TEMP_OVER[] = { 0x39, 0x155, 0x255, 0 };
171 static const u16 W83627EHF_REG_TEMP_CONFIG[] = { 0, 0x152, 0x252, 0 };
172
173 /* Fan clock dividers are spread over the following five registers */
174 #define W83627EHF_REG_FANDIV1 0x47
175 #define W83627EHF_REG_FANDIV2 0x4B
176 #define W83627EHF_REG_VBAT 0x5D
177 #define W83627EHF_REG_DIODE 0x59
178 #define W83627EHF_REG_SMI_OVT 0x4C
179
180 #define W83627EHF_REG_ALARM1 0x459
181 #define W83627EHF_REG_ALARM2 0x45A
182 #define W83627EHF_REG_ALARM3 0x45B
183
184 #define W83627EHF_REG_CASEOPEN_DET 0x42 /* SMI STATUS #2 */
185 #define W83627EHF_REG_CASEOPEN_CLR 0x46 /* SMI MASK #3 */
186
187 /* SmartFan registers */
188 #define W83627EHF_REG_FAN_STEPUP_TIME 0x0f
189 #define W83627EHF_REG_FAN_STEPDOWN_TIME 0x0e
190
191 /* DC or PWM output fan configuration */
192 static const u8 W83627EHF_REG_PWM_ENABLE[] = {
193 0x04, /* SYS FAN0 output mode and PWM mode */
194 0x04, /* CPU FAN0 output mode and PWM mode */
195 0x12, /* AUX FAN mode */
196 0x62, /* CPU FAN1 mode */
197 };
198
199 static const u8 W83627EHF_PWM_MODE_SHIFT[] = { 0, 1, 0, 6 };
200 static const u8 W83627EHF_PWM_ENABLE_SHIFT[] = { 2, 4, 1, 4 };
201
202 /* FAN Duty Cycle, be used to control */
203 static const u16 W83627EHF_REG_PWM[] = { 0x01, 0x03, 0x11, 0x61 };
204 static const u16 W83627EHF_REG_TARGET[] = { 0x05, 0x06, 0x13, 0x63 };
205 static const u8 W83627EHF_REG_TOLERANCE[] = { 0x07, 0x07, 0x14, 0x62 };
206
207 /* Advanced Fan control, some values are common for all fans */
208 static const u16 W83627EHF_REG_FAN_START_OUTPUT[] = { 0x0a, 0x0b, 0x16, 0x65 };
209 static const u16 W83627EHF_REG_FAN_STOP_OUTPUT[] = { 0x08, 0x09, 0x15, 0x64 };
210 static const u16 W83627EHF_REG_FAN_STOP_TIME[] = { 0x0c, 0x0d, 0x17, 0x66 };
211
212 static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON[]
213 = { 0xff, 0x67, 0xff, 0x69 };
214 static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON[]
215 = { 0xff, 0x68, 0xff, 0x6a };
216
217 static const u16 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B[] = { 0x67, 0x69, 0x6b };
218 static const u16 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B[]
219 = { 0x68, 0x6a, 0x6c };
220
221 static const u16 W83627EHF_REG_TEMP_OFFSET[] = { 0x454, 0x455, 0x456 };
222
223 static const char *const w83667hg_b_temp_label[] = {
224 "SYSTIN",
225 "CPUTIN",
226 "AUXTIN",
227 "AMDTSI",
228 "PECI Agent 1",
229 "PECI Agent 2",
230 "PECI Agent 3",
231 "PECI Agent 4"
232 };
233
234 #define NUM_REG_TEMP ARRAY_SIZE(W83627EHF_REG_TEMP)
235
is_word_sized(u16 reg)236 static int is_word_sized(u16 reg)
237 {
238 return ((((reg & 0xff00) == 0x100
239 || (reg & 0xff00) == 0x200)
240 && ((reg & 0x00ff) == 0x50
241 || (reg & 0x00ff) == 0x53
242 || (reg & 0x00ff) == 0x55))
243 || (reg & 0xfff0) == 0x630
244 || reg == 0x640 || reg == 0x642
245 || ((reg & 0xfff0) == 0x650
246 && (reg & 0x000f) >= 0x06)
247 || reg == 0x73 || reg == 0x75 || reg == 0x77
248 );
249 }
250
251 /*
252 * Conversions
253 */
254
255 /* 1 is PWM mode, output in ms */
step_time_from_reg(u8 reg,u8 mode)256 static inline unsigned int step_time_from_reg(u8 reg, u8 mode)
257 {
258 return mode ? 100 * reg : 400 * reg;
259 }
260
step_time_to_reg(unsigned int msec,u8 mode)261 static inline u8 step_time_to_reg(unsigned int msec, u8 mode)
262 {
263 return clamp_val((mode ? (msec + 50) / 100 : (msec + 200) / 400),
264 1, 255);
265 }
266
fan_from_reg8(u16 reg,unsigned int divreg)267 static unsigned int fan_from_reg8(u16 reg, unsigned int divreg)
268 {
269 if (reg == 0 || reg == 255)
270 return 0;
271 return 1350000U / (reg << divreg);
272 }
273
274 static inline unsigned int
div_from_reg(u8 reg)275 div_from_reg(u8 reg)
276 {
277 return 1 << reg;
278 }
279
280 /*
281 * Some of the voltage inputs have internal scaling, the tables below
282 * contain 8 (the ADC LSB in mV) * scaling factor * 100
283 */
284 static const u16 scale_in_common[10] = {
285 800, 800, 1600, 1600, 800, 800, 800, 1600, 1600, 800
286 };
287 static const u16 scale_in_w83627uhg[9] = {
288 800, 800, 3328, 3424, 800, 800, 0, 3328, 3400
289 };
290
in_from_reg(u8 reg,u8 nr,const u16 * scale_in)291 static inline long in_from_reg(u8 reg, u8 nr, const u16 *scale_in)
292 {
293 return DIV_ROUND_CLOSEST(reg * scale_in[nr], 100);
294 }
295
in_to_reg(u32 val,u8 nr,const u16 * scale_in)296 static inline u8 in_to_reg(u32 val, u8 nr, const u16 *scale_in)
297 {
298 return clamp_val(DIV_ROUND_CLOSEST(val * 100, scale_in[nr]), 0, 255);
299 }
300
301 /*
302 * Data structures and manipulation thereof
303 */
304
305 struct w83627ehf_data {
306 int addr; /* IO base of hw monitor block */
307 const char *name;
308
309 struct mutex lock;
310
311 u16 reg_temp[NUM_REG_TEMP];
312 u16 reg_temp_over[NUM_REG_TEMP];
313 u16 reg_temp_hyst[NUM_REG_TEMP];
314 u16 reg_temp_config[NUM_REG_TEMP];
315 u8 temp_src[NUM_REG_TEMP];
316 const char * const *temp_label;
317
318 const u16 *REG_FAN_MAX_OUTPUT;
319 const u16 *REG_FAN_STEP_OUTPUT;
320 const u16 *scale_in;
321
322 struct mutex update_lock;
323 bool valid; /* true if following fields are valid */
324 unsigned long last_updated; /* In jiffies */
325
326 /* Register values */
327 u8 bank; /* current register bank */
328 u8 in_num; /* number of in inputs we have */
329 u8 in[10]; /* Register value */
330 u8 in_max[10]; /* Register value */
331 u8 in_min[10]; /* Register value */
332 unsigned int rpm[5];
333 u16 fan_min[5];
334 u8 fan_div[5];
335 u8 has_fan; /* some fan inputs can be disabled */
336 u8 has_fan_min; /* some fans don't have min register */
337 u8 temp_type[3];
338 s8 temp_offset[3];
339 s16 temp[9];
340 s16 temp_max[9];
341 s16 temp_max_hyst[9];
342 u32 alarms;
343 u8 caseopen;
344
345 u8 pwm_mode[4]; /* 0->DC variable voltage, 1->PWM variable duty cycle */
346 u8 pwm_enable[4]; /* 1->manual
347 * 2->thermal cruise mode (also called SmartFan I)
348 * 3->fan speed cruise mode
349 * 4->variable thermal cruise (also called
350 * SmartFan III)
351 * 5->enhanced variable thermal cruise (also called
352 * SmartFan IV)
353 */
354 u8 pwm_enable_orig[4]; /* original value of pwm_enable */
355 u8 pwm_num; /* number of pwm */
356 u8 pwm[4];
357 u8 target_temp[4];
358 u8 tolerance[4];
359
360 u8 fan_start_output[4]; /* minimum fan speed when spinning up */
361 u8 fan_stop_output[4]; /* minimum fan speed when spinning down */
362 u8 fan_stop_time[4]; /* time at minimum before disabling fan */
363 u8 fan_max_output[4]; /* maximum fan speed */
364 u8 fan_step_output[4]; /* rate of change output value */
365
366 u8 vid;
367 u8 vrm;
368
369 u16 have_temp;
370 u16 have_temp_offset;
371 u8 in6_skip:1;
372 u8 temp3_val_only:1;
373 u8 have_vid:1;
374
375 /* Remember extra register values over suspend/resume */
376 u8 vbat;
377 u8 fandiv1;
378 u8 fandiv2;
379 };
380
381 struct w83627ehf_sio_data {
382 int sioreg;
383 enum kinds kind;
384 };
385
386 /*
387 * On older chips, only registers 0x50-0x5f are banked.
388 * On more recent chips, all registers are banked.
389 * Assume that is the case and set the bank number for each access.
390 * Cache the bank number so it only needs to be set if it changes.
391 */
w83627ehf_set_bank(struct w83627ehf_data * data,u16 reg)392 static inline void w83627ehf_set_bank(struct w83627ehf_data *data, u16 reg)
393 {
394 u8 bank = reg >> 8;
395 if (data->bank != bank) {
396 outb_p(W83627EHF_REG_BANK, data->addr + ADDR_REG_OFFSET);
397 outb_p(bank, data->addr + DATA_REG_OFFSET);
398 data->bank = bank;
399 }
400 }
401
w83627ehf_read_value(struct w83627ehf_data * data,u16 reg)402 static u16 w83627ehf_read_value(struct w83627ehf_data *data, u16 reg)
403 {
404 int res, word_sized = is_word_sized(reg);
405
406 mutex_lock(&data->lock);
407
408 w83627ehf_set_bank(data, reg);
409 outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
410 res = inb_p(data->addr + DATA_REG_OFFSET);
411 if (word_sized) {
412 outb_p((reg & 0xff) + 1,
413 data->addr + ADDR_REG_OFFSET);
414 res = (res << 8) + inb_p(data->addr + DATA_REG_OFFSET);
415 }
416
417 mutex_unlock(&data->lock);
418 return res;
419 }
420
w83627ehf_write_value(struct w83627ehf_data * data,u16 reg,u16 value)421 static int w83627ehf_write_value(struct w83627ehf_data *data, u16 reg,
422 u16 value)
423 {
424 int word_sized = is_word_sized(reg);
425
426 mutex_lock(&data->lock);
427
428 w83627ehf_set_bank(data, reg);
429 outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
430 if (word_sized) {
431 outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
432 outb_p((reg & 0xff) + 1,
433 data->addr + ADDR_REG_OFFSET);
434 }
435 outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
436
437 mutex_unlock(&data->lock);
438 return 0;
439 }
440
441 /* We left-align 8-bit temperature values to make the code simpler */
w83627ehf_read_temp(struct w83627ehf_data * data,u16 reg)442 static u16 w83627ehf_read_temp(struct w83627ehf_data *data, u16 reg)
443 {
444 u16 res;
445
446 res = w83627ehf_read_value(data, reg);
447 if (!is_word_sized(reg))
448 res <<= 8;
449
450 return res;
451 }
452
w83627ehf_write_temp(struct w83627ehf_data * data,u16 reg,u16 value)453 static int w83627ehf_write_temp(struct w83627ehf_data *data, u16 reg,
454 u16 value)
455 {
456 if (!is_word_sized(reg))
457 value >>= 8;
458 return w83627ehf_write_value(data, reg, value);
459 }
460
461 /* This function assumes that the caller holds data->update_lock */
w83627ehf_write_fan_div(struct w83627ehf_data * data,int nr)462 static void w83627ehf_write_fan_div(struct w83627ehf_data *data, int nr)
463 {
464 u8 reg;
465
466 switch (nr) {
467 case 0:
468 reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0xcf)
469 | ((data->fan_div[0] & 0x03) << 4);
470 /* fan5 input control bit is write only, compute the value */
471 reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
472 w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
473 reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xdf)
474 | ((data->fan_div[0] & 0x04) << 3);
475 w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
476 break;
477 case 1:
478 reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV1) & 0x3f)
479 | ((data->fan_div[1] & 0x03) << 6);
480 /* fan5 input control bit is write only, compute the value */
481 reg |= (data->has_fan & (1 << 4)) ? 1 : 0;
482 w83627ehf_write_value(data, W83627EHF_REG_FANDIV1, reg);
483 reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0xbf)
484 | ((data->fan_div[1] & 0x04) << 4);
485 w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
486 break;
487 case 2:
488 reg = (w83627ehf_read_value(data, W83627EHF_REG_FANDIV2) & 0x3f)
489 | ((data->fan_div[2] & 0x03) << 6);
490 w83627ehf_write_value(data, W83627EHF_REG_FANDIV2, reg);
491 reg = (w83627ehf_read_value(data, W83627EHF_REG_VBAT) & 0x7f)
492 | ((data->fan_div[2] & 0x04) << 5);
493 w83627ehf_write_value(data, W83627EHF_REG_VBAT, reg);
494 break;
495 case 3:
496 reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0xfc)
497 | (data->fan_div[3] & 0x03);
498 w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
499 reg = (w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT) & 0x7f)
500 | ((data->fan_div[3] & 0x04) << 5);
501 w83627ehf_write_value(data, W83627EHF_REG_SMI_OVT, reg);
502 break;
503 case 4:
504 reg = (w83627ehf_read_value(data, W83627EHF_REG_DIODE) & 0x73)
505 | ((data->fan_div[4] & 0x03) << 2)
506 | ((data->fan_div[4] & 0x04) << 5);
507 w83627ehf_write_value(data, W83627EHF_REG_DIODE, reg);
508 break;
509 }
510 }
511
w83627ehf_update_fan_div(struct w83627ehf_data * data)512 static void w83627ehf_update_fan_div(struct w83627ehf_data *data)
513 {
514 int i;
515
516 i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
517 data->fan_div[0] = (i >> 4) & 0x03;
518 data->fan_div[1] = (i >> 6) & 0x03;
519 i = w83627ehf_read_value(data, W83627EHF_REG_FANDIV2);
520 data->fan_div[2] = (i >> 6) & 0x03;
521 i = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
522 data->fan_div[0] |= (i >> 3) & 0x04;
523 data->fan_div[1] |= (i >> 4) & 0x04;
524 data->fan_div[2] |= (i >> 5) & 0x04;
525 if (data->has_fan & ((1 << 3) | (1 << 4))) {
526 i = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
527 data->fan_div[3] = i & 0x03;
528 data->fan_div[4] = ((i >> 2) & 0x03)
529 | ((i >> 5) & 0x04);
530 }
531 if (data->has_fan & (1 << 3)) {
532 i = w83627ehf_read_value(data, W83627EHF_REG_SMI_OVT);
533 data->fan_div[3] |= (i >> 5) & 0x04;
534 }
535 }
536
w83627ehf_update_pwm(struct w83627ehf_data * data)537 static void w83627ehf_update_pwm(struct w83627ehf_data *data)
538 {
539 int i;
540 int pwmcfg = 0, tolerance = 0; /* shut up the compiler */
541
542 for (i = 0; i < data->pwm_num; i++) {
543 if (!(data->has_fan & (1 << i)))
544 continue;
545
546 /* pwmcfg, tolerance mapped for i=0, i=1 to same reg */
547 if (i != 1) {
548 pwmcfg = w83627ehf_read_value(data,
549 W83627EHF_REG_PWM_ENABLE[i]);
550 tolerance = w83627ehf_read_value(data,
551 W83627EHF_REG_TOLERANCE[i]);
552 }
553 data->pwm_mode[i] =
554 ((pwmcfg >> W83627EHF_PWM_MODE_SHIFT[i]) & 1) ? 0 : 1;
555 data->pwm_enable[i] = ((pwmcfg >> W83627EHF_PWM_ENABLE_SHIFT[i])
556 & 3) + 1;
557 data->pwm[i] = w83627ehf_read_value(data, W83627EHF_REG_PWM[i]);
558
559 data->tolerance[i] = (tolerance >> (i == 1 ? 4 : 0)) & 0x0f;
560 }
561 }
562
w83627ehf_update_device(struct device * dev)563 static struct w83627ehf_data *w83627ehf_update_device(struct device *dev)
564 {
565 struct w83627ehf_data *data = dev_get_drvdata(dev);
566 int i;
567
568 mutex_lock(&data->update_lock);
569
570 if (time_after(jiffies, data->last_updated + HZ + HZ/2)
571 || !data->valid) {
572 /* Fan clock dividers */
573 w83627ehf_update_fan_div(data);
574
575 /* Measured voltages and limits */
576 for (i = 0; i < data->in_num; i++) {
577 if ((i == 6) && data->in6_skip)
578 continue;
579
580 data->in[i] = w83627ehf_read_value(data,
581 W83627EHF_REG_IN(i));
582 data->in_min[i] = w83627ehf_read_value(data,
583 W83627EHF_REG_IN_MIN(i));
584 data->in_max[i] = w83627ehf_read_value(data,
585 W83627EHF_REG_IN_MAX(i));
586 }
587
588 /* Measured fan speeds and limits */
589 for (i = 0; i < 5; i++) {
590 u16 reg;
591
592 if (!(data->has_fan & (1 << i)))
593 continue;
594
595 reg = w83627ehf_read_value(data, W83627EHF_REG_FAN[i]);
596 data->rpm[i] = fan_from_reg8(reg, data->fan_div[i]);
597
598 if (data->has_fan_min & (1 << i))
599 data->fan_min[i] = w83627ehf_read_value(data,
600 W83627EHF_REG_FAN_MIN[i]);
601
602 /*
603 * If we failed to measure the fan speed and clock
604 * divider can be increased, let's try that for next
605 * time
606 */
607 if (reg >= 0xff && data->fan_div[i] < 0x07) {
608 dev_dbg(dev,
609 "Increasing fan%d clock divider from %u to %u\n",
610 i + 1, div_from_reg(data->fan_div[i]),
611 div_from_reg(data->fan_div[i] + 1));
612 data->fan_div[i]++;
613 w83627ehf_write_fan_div(data, i);
614 /* Preserve min limit if possible */
615 if ((data->has_fan_min & (1 << i))
616 && data->fan_min[i] >= 2
617 && data->fan_min[i] != 255)
618 w83627ehf_write_value(data,
619 W83627EHF_REG_FAN_MIN[i],
620 (data->fan_min[i] /= 2));
621 }
622 }
623
624 w83627ehf_update_pwm(data);
625
626 for (i = 0; i < data->pwm_num; i++) {
627 if (!(data->has_fan & (1 << i)))
628 continue;
629
630 data->fan_start_output[i] =
631 w83627ehf_read_value(data,
632 W83627EHF_REG_FAN_START_OUTPUT[i]);
633 data->fan_stop_output[i] =
634 w83627ehf_read_value(data,
635 W83627EHF_REG_FAN_STOP_OUTPUT[i]);
636 data->fan_stop_time[i] =
637 w83627ehf_read_value(data,
638 W83627EHF_REG_FAN_STOP_TIME[i]);
639
640 if (data->REG_FAN_MAX_OUTPUT &&
641 data->REG_FAN_MAX_OUTPUT[i] != 0xff)
642 data->fan_max_output[i] =
643 w83627ehf_read_value(data,
644 data->REG_FAN_MAX_OUTPUT[i]);
645
646 if (data->REG_FAN_STEP_OUTPUT &&
647 data->REG_FAN_STEP_OUTPUT[i] != 0xff)
648 data->fan_step_output[i] =
649 w83627ehf_read_value(data,
650 data->REG_FAN_STEP_OUTPUT[i]);
651
652 data->target_temp[i] =
653 w83627ehf_read_value(data,
654 W83627EHF_REG_TARGET[i]) &
655 (data->pwm_mode[i] == 1 ? 0x7f : 0xff);
656 }
657
658 /* Measured temperatures and limits */
659 for (i = 0; i < NUM_REG_TEMP; i++) {
660 if (!(data->have_temp & (1 << i)))
661 continue;
662 data->temp[i] = w83627ehf_read_temp(data,
663 data->reg_temp[i]);
664 if (data->reg_temp_over[i])
665 data->temp_max[i]
666 = w83627ehf_read_temp(data,
667 data->reg_temp_over[i]);
668 if (data->reg_temp_hyst[i])
669 data->temp_max_hyst[i]
670 = w83627ehf_read_temp(data,
671 data->reg_temp_hyst[i]);
672 if (i > 2)
673 continue;
674 if (data->have_temp_offset & (1 << i))
675 data->temp_offset[i]
676 = w83627ehf_read_value(data,
677 W83627EHF_REG_TEMP_OFFSET[i]);
678 }
679
680 data->alarms = w83627ehf_read_value(data,
681 W83627EHF_REG_ALARM1) |
682 (w83627ehf_read_value(data,
683 W83627EHF_REG_ALARM2) << 8) |
684 (w83627ehf_read_value(data,
685 W83627EHF_REG_ALARM3) << 16);
686
687 data->caseopen = w83627ehf_read_value(data,
688 W83627EHF_REG_CASEOPEN_DET);
689
690 data->last_updated = jiffies;
691 data->valid = true;
692 }
693
694 mutex_unlock(&data->update_lock);
695 return data;
696 }
697
698 #define store_in_reg(REG, reg) \
699 static int \
700 store_in_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \
701 long val) \
702 { \
703 if (val < 0) \
704 return -EINVAL; \
705 mutex_lock(&data->update_lock); \
706 data->in_##reg[channel] = in_to_reg(val, channel, data->scale_in); \
707 w83627ehf_write_value(data, W83627EHF_REG_IN_##REG(channel), \
708 data->in_##reg[channel]); \
709 mutex_unlock(&data->update_lock); \
710 return 0; \
711 }
712
store_in_reg(MIN,min)713 store_in_reg(MIN, min)
714 store_in_reg(MAX, max)
715
716 static int
717 store_fan_min(struct device *dev, struct w83627ehf_data *data, int channel,
718 long val)
719 {
720 unsigned int reg;
721 u8 new_div;
722
723 if (val < 0)
724 return -EINVAL;
725
726 mutex_lock(&data->update_lock);
727 if (!val) {
728 /* No min limit, alarm disabled */
729 data->fan_min[channel] = 255;
730 new_div = data->fan_div[channel]; /* No change */
731 dev_info(dev, "fan%u low limit and alarm disabled\n",
732 channel + 1);
733 } else if ((reg = 1350000U / val) >= 128 * 255) {
734 /*
735 * Speed below this value cannot possibly be represented,
736 * even with the highest divider (128)
737 */
738 data->fan_min[channel] = 254;
739 new_div = 7; /* 128 == (1 << 7) */
740 dev_warn(dev,
741 "fan%u low limit %lu below minimum %u, set to minimum\n",
742 channel + 1, val, fan_from_reg8(254, 7));
743 } else if (!reg) {
744 /*
745 * Speed above this value cannot possibly be represented,
746 * even with the lowest divider (1)
747 */
748 data->fan_min[channel] = 1;
749 new_div = 0; /* 1 == (1 << 0) */
750 dev_warn(dev,
751 "fan%u low limit %lu above maximum %u, set to maximum\n",
752 channel + 1, val, fan_from_reg8(1, 0));
753 } else {
754 /*
755 * Automatically pick the best divider, i.e. the one such
756 * that the min limit will correspond to a register value
757 * in the 96..192 range
758 */
759 new_div = 0;
760 while (reg > 192 && new_div < 7) {
761 reg >>= 1;
762 new_div++;
763 }
764 data->fan_min[channel] = reg;
765 }
766
767 /*
768 * Write both the fan clock divider (if it changed) and the new
769 * fan min (unconditionally)
770 */
771 if (new_div != data->fan_div[channel]) {
772 dev_dbg(dev, "fan%u clock divider changed from %u to %u\n",
773 channel + 1, div_from_reg(data->fan_div[channel]),
774 div_from_reg(new_div));
775 data->fan_div[channel] = new_div;
776 w83627ehf_write_fan_div(data, channel);
777 /* Give the chip time to sample a new speed value */
778 data->last_updated = jiffies;
779 }
780
781 w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[channel],
782 data->fan_min[channel]);
783 mutex_unlock(&data->update_lock);
784
785 return 0;
786 }
787
788 #define store_temp_reg(addr, reg) \
789 static int \
790 store_##reg(struct device *dev, struct w83627ehf_data *data, int channel, \
791 long val) \
792 { \
793 mutex_lock(&data->update_lock); \
794 data->reg[channel] = LM75_TEMP_TO_REG(val); \
795 w83627ehf_write_temp(data, data->addr[channel], data->reg[channel]); \
796 mutex_unlock(&data->update_lock); \
797 return 0; \
798 }
799 store_temp_reg(reg_temp_over, temp_max);
800 store_temp_reg(reg_temp_hyst, temp_max_hyst);
801
802 static int
store_temp_offset(struct device * dev,struct w83627ehf_data * data,int channel,long val)803 store_temp_offset(struct device *dev, struct w83627ehf_data *data, int channel,
804 long val)
805 {
806 val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
807
808 mutex_lock(&data->update_lock);
809 data->temp_offset[channel] = val;
810 w83627ehf_write_value(data, W83627EHF_REG_TEMP_OFFSET[channel], val);
811 mutex_unlock(&data->update_lock);
812 return 0;
813 }
814
815 static int
store_pwm_mode(struct device * dev,struct w83627ehf_data * data,int channel,long val)816 store_pwm_mode(struct device *dev, struct w83627ehf_data *data, int channel,
817 long val)
818 {
819 u16 reg;
820
821 if (val < 0 || val > 1)
822 return -EINVAL;
823
824 mutex_lock(&data->update_lock);
825 reg = w83627ehf_read_value(data, W83627EHF_REG_PWM_ENABLE[channel]);
826 data->pwm_mode[channel] = val;
827 reg &= ~(1 << W83627EHF_PWM_MODE_SHIFT[channel]);
828 if (!val)
829 reg |= 1 << W83627EHF_PWM_MODE_SHIFT[channel];
830 w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel], reg);
831 mutex_unlock(&data->update_lock);
832 return 0;
833 }
834
835 static int
store_pwm(struct device * dev,struct w83627ehf_data * data,int channel,long val)836 store_pwm(struct device *dev, struct w83627ehf_data *data, int channel,
837 long val)
838 {
839 val = clamp_val(val, 0, 255);
840
841 mutex_lock(&data->update_lock);
842 data->pwm[channel] = val;
843 w83627ehf_write_value(data, W83627EHF_REG_PWM[channel], val);
844 mutex_unlock(&data->update_lock);
845 return 0;
846 }
847
848 static int
store_pwm_enable(struct device * dev,struct w83627ehf_data * data,int channel,long val)849 store_pwm_enable(struct device *dev, struct w83627ehf_data *data, int channel,
850 long val)
851 {
852 u16 reg;
853
854 if (!val || val < 0 ||
855 (val > 4 && val != data->pwm_enable_orig[channel]))
856 return -EINVAL;
857
858 mutex_lock(&data->update_lock);
859 data->pwm_enable[channel] = val;
860 reg = w83627ehf_read_value(data,
861 W83627EHF_REG_PWM_ENABLE[channel]);
862 reg &= ~(0x03 << W83627EHF_PWM_ENABLE_SHIFT[channel]);
863 reg |= (val - 1) << W83627EHF_PWM_ENABLE_SHIFT[channel];
864 w83627ehf_write_value(data, W83627EHF_REG_PWM_ENABLE[channel],
865 reg);
866 mutex_unlock(&data->update_lock);
867 return 0;
868 }
869
870 #define show_tol_temp(reg) \
871 static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
872 char *buf) \
873 { \
874 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \
875 struct sensor_device_attribute *sensor_attr = \
876 to_sensor_dev_attr(attr); \
877 int nr = sensor_attr->index; \
878 return sprintf(buf, "%d\n", data->reg[nr] * 1000); \
879 }
880
881 show_tol_temp(tolerance)
show_tol_temp(target_temp)882 show_tol_temp(target_temp)
883
884 static ssize_t
885 store_target_temp(struct device *dev, struct device_attribute *attr,
886 const char *buf, size_t count)
887 {
888 struct w83627ehf_data *data = dev_get_drvdata(dev);
889 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
890 int nr = sensor_attr->index;
891 long val;
892 int err;
893
894 err = kstrtol(buf, 10, &val);
895 if (err < 0)
896 return err;
897
898 val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 127);
899
900 mutex_lock(&data->update_lock);
901 data->target_temp[nr] = val;
902 w83627ehf_write_value(data, W83627EHF_REG_TARGET[nr], val);
903 mutex_unlock(&data->update_lock);
904 return count;
905 }
906
907 static ssize_t
store_tolerance(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)908 store_tolerance(struct device *dev, struct device_attribute *attr,
909 const char *buf, size_t count)
910 {
911 struct w83627ehf_data *data = dev_get_drvdata(dev);
912 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
913 int nr = sensor_attr->index;
914 u16 reg;
915 long val;
916 int err;
917
918 err = kstrtol(buf, 10, &val);
919 if (err < 0)
920 return err;
921
922 /* Limit the temp to 0C - 15C */
923 val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 0, 15);
924
925 mutex_lock(&data->update_lock);
926 reg = w83627ehf_read_value(data, W83627EHF_REG_TOLERANCE[nr]);
927 if (nr == 1)
928 reg = (reg & 0x0f) | (val << 4);
929 else
930 reg = (reg & 0xf0) | val;
931 w83627ehf_write_value(data, W83627EHF_REG_TOLERANCE[nr], reg);
932 data->tolerance[nr] = val;
933 mutex_unlock(&data->update_lock);
934 return count;
935 }
936
937 static SENSOR_DEVICE_ATTR(pwm1_target, 0644, show_target_temp,
938 store_target_temp, 0);
939 static SENSOR_DEVICE_ATTR(pwm2_target, 0644, show_target_temp,
940 store_target_temp, 1);
941 static SENSOR_DEVICE_ATTR(pwm3_target, 0644, show_target_temp,
942 store_target_temp, 2);
943 static SENSOR_DEVICE_ATTR(pwm4_target, 0644, show_target_temp,
944 store_target_temp, 3);
945
946 static SENSOR_DEVICE_ATTR(pwm1_tolerance, 0644, show_tolerance,
947 store_tolerance, 0);
948 static SENSOR_DEVICE_ATTR(pwm2_tolerance, 0644, show_tolerance,
949 store_tolerance, 1);
950 static SENSOR_DEVICE_ATTR(pwm3_tolerance, 0644, show_tolerance,
951 store_tolerance, 2);
952 static SENSOR_DEVICE_ATTR(pwm4_tolerance, 0644, show_tolerance,
953 store_tolerance, 3);
954
955 /* Smart Fan registers */
956
957 #define fan_functions(reg, REG) \
958 static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
959 char *buf) \
960 { \
961 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \
962 struct sensor_device_attribute *sensor_attr = \
963 to_sensor_dev_attr(attr); \
964 int nr = sensor_attr->index; \
965 return sprintf(buf, "%d\n", data->reg[nr]); \
966 } \
967 static ssize_t \
968 store_##reg(struct device *dev, struct device_attribute *attr, \
969 const char *buf, size_t count) \
970 { \
971 struct w83627ehf_data *data = dev_get_drvdata(dev); \
972 struct sensor_device_attribute *sensor_attr = \
973 to_sensor_dev_attr(attr); \
974 int nr = sensor_attr->index; \
975 unsigned long val; \
976 int err; \
977 err = kstrtoul(buf, 10, &val); \
978 if (err < 0) \
979 return err; \
980 val = clamp_val(val, 1, 255); \
981 mutex_lock(&data->update_lock); \
982 data->reg[nr] = val; \
983 w83627ehf_write_value(data, REG[nr], val); \
984 mutex_unlock(&data->update_lock); \
985 return count; \
986 }
987
988 fan_functions(fan_start_output, W83627EHF_REG_FAN_START_OUTPUT)
989 fan_functions(fan_stop_output, W83627EHF_REG_FAN_STOP_OUTPUT)
990 fan_functions(fan_max_output, data->REG_FAN_MAX_OUTPUT)
991 fan_functions(fan_step_output, data->REG_FAN_STEP_OUTPUT)
992
993 #define fan_time_functions(reg, REG) \
994 static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
995 char *buf) \
996 { \
997 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent); \
998 struct sensor_device_attribute *sensor_attr = \
999 to_sensor_dev_attr(attr); \
1000 int nr = sensor_attr->index; \
1001 return sprintf(buf, "%d\n", \
1002 step_time_from_reg(data->reg[nr], \
1003 data->pwm_mode[nr])); \
1004 } \
1005 \
1006 static ssize_t \
1007 store_##reg(struct device *dev, struct device_attribute *attr, \
1008 const char *buf, size_t count) \
1009 { \
1010 struct w83627ehf_data *data = dev_get_drvdata(dev); \
1011 struct sensor_device_attribute *sensor_attr = \
1012 to_sensor_dev_attr(attr); \
1013 int nr = sensor_attr->index; \
1014 unsigned long val; \
1015 int err; \
1016 err = kstrtoul(buf, 10, &val); \
1017 if (err < 0) \
1018 return err; \
1019 val = step_time_to_reg(val, data->pwm_mode[nr]); \
1020 mutex_lock(&data->update_lock); \
1021 data->reg[nr] = val; \
1022 w83627ehf_write_value(data, REG[nr], val); \
1023 mutex_unlock(&data->update_lock); \
1024 return count; \
1025 } \
1026
1027 fan_time_functions(fan_stop_time, W83627EHF_REG_FAN_STOP_TIME)
1028
1029 static SENSOR_DEVICE_ATTR(pwm4_stop_time, 0644, show_fan_stop_time,
1030 store_fan_stop_time, 3);
1031 static SENSOR_DEVICE_ATTR(pwm4_start_output, 0644, show_fan_start_output,
1032 store_fan_start_output, 3);
1033 static SENSOR_DEVICE_ATTR(pwm4_stop_output, 0644, show_fan_stop_output,
1034 store_fan_stop_output, 3);
1035 static SENSOR_DEVICE_ATTR(pwm4_max_output, 0644, show_fan_max_output,
1036 store_fan_max_output, 3);
1037 static SENSOR_DEVICE_ATTR(pwm4_step_output, 0644, show_fan_step_output,
1038 store_fan_step_output, 3);
1039
1040 static SENSOR_DEVICE_ATTR(pwm3_stop_time, 0644, show_fan_stop_time,
1041 store_fan_stop_time, 2);
1042 static SENSOR_DEVICE_ATTR(pwm3_start_output, 0644, show_fan_start_output,
1043 store_fan_start_output, 2);
1044 static SENSOR_DEVICE_ATTR(pwm3_stop_output, 0644, show_fan_stop_output,
1045 store_fan_stop_output, 2);
1046
1047 static SENSOR_DEVICE_ATTR(pwm1_stop_time, 0644, show_fan_stop_time,
1048 store_fan_stop_time, 0);
1049 static SENSOR_DEVICE_ATTR(pwm2_stop_time, 0644, show_fan_stop_time,
1050 store_fan_stop_time, 1);
1051 static SENSOR_DEVICE_ATTR(pwm1_start_output, 0644, show_fan_start_output,
1052 store_fan_start_output, 0);
1053 static SENSOR_DEVICE_ATTR(pwm2_start_output, 0644, show_fan_start_output,
1054 store_fan_start_output, 1);
1055 static SENSOR_DEVICE_ATTR(pwm1_stop_output, 0644, show_fan_stop_output,
1056 store_fan_stop_output, 0);
1057 static SENSOR_DEVICE_ATTR(pwm2_stop_output, 0644, show_fan_stop_output,
1058 store_fan_stop_output, 1);
1059
1060
1061 /*
1062 * pwm1 and pwm3 don't support max and step settings on all chips.
1063 * Need to check support while generating/removing attribute files.
1064 */
1065 static SENSOR_DEVICE_ATTR(pwm1_max_output, 0644, show_fan_max_output,
1066 store_fan_max_output, 0);
1067 static SENSOR_DEVICE_ATTR(pwm1_step_output, 0644, show_fan_step_output,
1068 store_fan_step_output, 0);
1069 static SENSOR_DEVICE_ATTR(pwm2_max_output, 0644, show_fan_max_output,
1070 store_fan_max_output, 1);
1071 static SENSOR_DEVICE_ATTR(pwm2_step_output, 0644, show_fan_step_output,
1072 store_fan_step_output, 1);
1073 static SENSOR_DEVICE_ATTR(pwm3_max_output, 0644, show_fan_max_output,
1074 store_fan_max_output, 2);
1075 static SENSOR_DEVICE_ATTR(pwm3_step_output, 0644, show_fan_step_output,
1076 store_fan_step_output, 2);
1077
1078 static ssize_t
cpu0_vid_show(struct device * dev,struct device_attribute * attr,char * buf)1079 cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
1080 {
1081 struct w83627ehf_data *data = dev_get_drvdata(dev);
1082 return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
1083 }
1084 static DEVICE_ATTR_RO(cpu0_vid);
1085
1086
1087 /* Case open detection */
1088 static int
clear_caseopen(struct device * dev,struct w83627ehf_data * data,int channel,long val)1089 clear_caseopen(struct device *dev, struct w83627ehf_data *data, int channel,
1090 long val)
1091 {
1092 const u16 mask = 0x80;
1093 u16 reg;
1094
1095 if (val != 0 || channel != 0)
1096 return -EINVAL;
1097
1098 mutex_lock(&data->update_lock);
1099 reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR);
1100 w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask);
1101 w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~mask);
1102 data->valid = false; /* Force cache refresh */
1103 mutex_unlock(&data->update_lock);
1104
1105 return 0;
1106 }
1107
w83627ehf_attrs_visible(struct kobject * kobj,struct attribute * a,int n)1108 static umode_t w83627ehf_attrs_visible(struct kobject *kobj,
1109 struct attribute *a, int n)
1110 {
1111 struct device *dev = kobj_to_dev(kobj);
1112 struct w83627ehf_data *data = dev_get_drvdata(dev);
1113 struct device_attribute *devattr;
1114 struct sensor_device_attribute *sda;
1115
1116 devattr = container_of(a, struct device_attribute, attr);
1117
1118 /* Not sensor */
1119 if (devattr->show == cpu0_vid_show && data->have_vid)
1120 return a->mode;
1121
1122 sda = (struct sensor_device_attribute *)devattr;
1123
1124 if (sda->index < 2 &&
1125 (devattr->show == show_fan_stop_time ||
1126 devattr->show == show_fan_start_output ||
1127 devattr->show == show_fan_stop_output))
1128 return a->mode;
1129
1130 if (sda->index < 3 &&
1131 (devattr->show == show_fan_max_output ||
1132 devattr->show == show_fan_step_output) &&
1133 data->REG_FAN_STEP_OUTPUT &&
1134 data->REG_FAN_STEP_OUTPUT[sda->index] != 0xff)
1135 return a->mode;
1136
1137 /* if fan3 and fan4 are enabled create the files for them */
1138 if (sda->index == 2 &&
1139 (data->has_fan & (1 << 2)) && data->pwm_num >= 3 &&
1140 (devattr->show == show_fan_stop_time ||
1141 devattr->show == show_fan_start_output ||
1142 devattr->show == show_fan_stop_output))
1143 return a->mode;
1144
1145 if (sda->index == 3 &&
1146 (data->has_fan & (1 << 3)) && data->pwm_num >= 4 &&
1147 (devattr->show == show_fan_stop_time ||
1148 devattr->show == show_fan_start_output ||
1149 devattr->show == show_fan_stop_output ||
1150 devattr->show == show_fan_max_output ||
1151 devattr->show == show_fan_step_output))
1152 return a->mode;
1153
1154 if ((devattr->show == show_target_temp ||
1155 devattr->show == show_tolerance) &&
1156 (data->has_fan & (1 << sda->index)) &&
1157 sda->index < data->pwm_num)
1158 return a->mode;
1159
1160 return 0;
1161 }
1162
1163 /* These groups handle non-standard attributes used in this device */
1164 static struct attribute *w83627ehf_attrs[] = {
1165
1166 &sensor_dev_attr_pwm1_stop_time.dev_attr.attr,
1167 &sensor_dev_attr_pwm1_start_output.dev_attr.attr,
1168 &sensor_dev_attr_pwm1_stop_output.dev_attr.attr,
1169 &sensor_dev_attr_pwm1_max_output.dev_attr.attr,
1170 &sensor_dev_attr_pwm1_step_output.dev_attr.attr,
1171 &sensor_dev_attr_pwm1_target.dev_attr.attr,
1172 &sensor_dev_attr_pwm1_tolerance.dev_attr.attr,
1173
1174 &sensor_dev_attr_pwm2_stop_time.dev_attr.attr,
1175 &sensor_dev_attr_pwm2_start_output.dev_attr.attr,
1176 &sensor_dev_attr_pwm2_stop_output.dev_attr.attr,
1177 &sensor_dev_attr_pwm2_max_output.dev_attr.attr,
1178 &sensor_dev_attr_pwm2_step_output.dev_attr.attr,
1179 &sensor_dev_attr_pwm2_target.dev_attr.attr,
1180 &sensor_dev_attr_pwm2_tolerance.dev_attr.attr,
1181
1182 &sensor_dev_attr_pwm3_stop_time.dev_attr.attr,
1183 &sensor_dev_attr_pwm3_start_output.dev_attr.attr,
1184 &sensor_dev_attr_pwm3_stop_output.dev_attr.attr,
1185 &sensor_dev_attr_pwm3_max_output.dev_attr.attr,
1186 &sensor_dev_attr_pwm3_step_output.dev_attr.attr,
1187 &sensor_dev_attr_pwm3_target.dev_attr.attr,
1188 &sensor_dev_attr_pwm3_tolerance.dev_attr.attr,
1189
1190 &sensor_dev_attr_pwm4_stop_time.dev_attr.attr,
1191 &sensor_dev_attr_pwm4_start_output.dev_attr.attr,
1192 &sensor_dev_attr_pwm4_stop_output.dev_attr.attr,
1193 &sensor_dev_attr_pwm4_max_output.dev_attr.attr,
1194 &sensor_dev_attr_pwm4_step_output.dev_attr.attr,
1195 &sensor_dev_attr_pwm4_target.dev_attr.attr,
1196 &sensor_dev_attr_pwm4_tolerance.dev_attr.attr,
1197
1198 &dev_attr_cpu0_vid.attr,
1199 NULL
1200 };
1201
1202 static const struct attribute_group w83627ehf_group = {
1203 .attrs = w83627ehf_attrs,
1204 .is_visible = w83627ehf_attrs_visible,
1205 };
1206
1207 static const struct attribute_group *w83627ehf_groups[] = {
1208 &w83627ehf_group,
1209 NULL
1210 };
1211
1212 /*
1213 * Driver and device management
1214 */
1215
1216 /* Get the monitoring functions started */
w83627ehf_init_device(struct w83627ehf_data * data,enum kinds kind)1217 static inline void w83627ehf_init_device(struct w83627ehf_data *data,
1218 enum kinds kind)
1219 {
1220 int i;
1221 u8 tmp, diode;
1222
1223 /* Start monitoring is needed */
1224 tmp = w83627ehf_read_value(data, W83627EHF_REG_CONFIG);
1225 if (!(tmp & 0x01))
1226 w83627ehf_write_value(data, W83627EHF_REG_CONFIG,
1227 tmp | 0x01);
1228
1229 /* Enable temperature sensors if needed */
1230 for (i = 0; i < NUM_REG_TEMP; i++) {
1231 if (!(data->have_temp & (1 << i)))
1232 continue;
1233 if (!data->reg_temp_config[i])
1234 continue;
1235 tmp = w83627ehf_read_value(data,
1236 data->reg_temp_config[i]);
1237 if (tmp & 0x01)
1238 w83627ehf_write_value(data,
1239 data->reg_temp_config[i],
1240 tmp & 0xfe);
1241 }
1242
1243 /* Enable VBAT monitoring if needed */
1244 tmp = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
1245 if (!(tmp & 0x01))
1246 w83627ehf_write_value(data, W83627EHF_REG_VBAT, tmp | 0x01);
1247
1248 /* Get thermal sensor types */
1249 switch (kind) {
1250 case w83627ehf:
1251 diode = w83627ehf_read_value(data, W83627EHF_REG_DIODE);
1252 break;
1253 case w83627uhg:
1254 diode = 0x00;
1255 break;
1256 default:
1257 diode = 0x70;
1258 }
1259 for (i = 0; i < 3; i++) {
1260 const char *label = NULL;
1261
1262 if (data->temp_label)
1263 label = data->temp_label[data->temp_src[i]];
1264
1265 /* Digital source overrides analog type */
1266 if (label && strncmp(label, "PECI", 4) == 0)
1267 data->temp_type[i] = 6;
1268 else if (label && strncmp(label, "AMD", 3) == 0)
1269 data->temp_type[i] = 5;
1270 else if ((tmp & (0x02 << i)))
1271 data->temp_type[i] = (diode & (0x10 << i)) ? 1 : 3;
1272 else
1273 data->temp_type[i] = 4; /* thermistor */
1274 }
1275 }
1276
1277 static void
w83627ehf_set_temp_reg_ehf(struct w83627ehf_data * data,int n_temp)1278 w83627ehf_set_temp_reg_ehf(struct w83627ehf_data *data, int n_temp)
1279 {
1280 int i;
1281
1282 for (i = 0; i < n_temp; i++) {
1283 data->reg_temp[i] = W83627EHF_REG_TEMP[i];
1284 data->reg_temp_over[i] = W83627EHF_REG_TEMP_OVER[i];
1285 data->reg_temp_hyst[i] = W83627EHF_REG_TEMP_HYST[i];
1286 data->reg_temp_config[i] = W83627EHF_REG_TEMP_CONFIG[i];
1287 }
1288 }
1289
1290 static void
w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data * sio_data,struct w83627ehf_data * data)1291 w83627ehf_check_fan_inputs(const struct w83627ehf_sio_data *sio_data,
1292 struct w83627ehf_data *data)
1293 {
1294 int fan3pin, fan4pin, fan5pin, regval;
1295
1296 /* The W83627UHG is simple, only two fan inputs, no config */
1297 if (sio_data->kind == w83627uhg) {
1298 data->has_fan = 0x03; /* fan1 and fan2 */
1299 data->has_fan_min = 0x03;
1300 return;
1301 }
1302
1303 /* fan4 and fan5 share some pins with the GPIO and serial flash */
1304 if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
1305 fan3pin = 1;
1306 fan4pin = superio_inb(sio_data->sioreg, 0x27) & 0x40;
1307 fan5pin = superio_inb(sio_data->sioreg, 0x27) & 0x20;
1308 } else {
1309 fan3pin = 1;
1310 fan4pin = !(superio_inb(sio_data->sioreg, 0x29) & 0x06);
1311 fan5pin = !(superio_inb(sio_data->sioreg, 0x24) & 0x02);
1312 }
1313
1314 data->has_fan = data->has_fan_min = 0x03; /* fan1 and fan2 */
1315 data->has_fan |= (fan3pin << 2);
1316 data->has_fan_min |= (fan3pin << 2);
1317
1318 /*
1319 * It looks like fan4 and fan5 pins can be alternatively used
1320 * as fan on/off switches, but fan5 control is write only :/
1321 * We assume that if the serial interface is disabled, designers
1322 * connected fan5 as input unless they are emitting log 1, which
1323 * is not the default.
1324 */
1325 regval = w83627ehf_read_value(data, W83627EHF_REG_FANDIV1);
1326 if ((regval & (1 << 2)) && fan4pin) {
1327 data->has_fan |= (1 << 3);
1328 data->has_fan_min |= (1 << 3);
1329 }
1330 if (!(regval & (1 << 1)) && fan5pin) {
1331 data->has_fan |= (1 << 4);
1332 data->has_fan_min |= (1 << 4);
1333 }
1334 }
1335
1336 static umode_t
w83627ehf_is_visible(const void * drvdata,enum hwmon_sensor_types type,u32 attr,int channel)1337 w83627ehf_is_visible(const void *drvdata, enum hwmon_sensor_types type,
1338 u32 attr, int channel)
1339 {
1340 const struct w83627ehf_data *data = drvdata;
1341
1342 switch (type) {
1343 case hwmon_temp:
1344 /* channel 0.., name 1.. */
1345 if (!(data->have_temp & (1 << channel)))
1346 return 0;
1347 if (attr == hwmon_temp_input)
1348 return 0444;
1349 if (attr == hwmon_temp_label) {
1350 if (data->temp_label)
1351 return 0444;
1352 return 0;
1353 }
1354 if (channel == 2 && data->temp3_val_only)
1355 return 0;
1356 if (attr == hwmon_temp_max) {
1357 if (data->reg_temp_over[channel])
1358 return 0644;
1359 else
1360 return 0;
1361 }
1362 if (attr == hwmon_temp_max_hyst) {
1363 if (data->reg_temp_hyst[channel])
1364 return 0644;
1365 else
1366 return 0;
1367 }
1368 if (channel > 2)
1369 return 0;
1370 if (attr == hwmon_temp_alarm || attr == hwmon_temp_type)
1371 return 0444;
1372 if (attr == hwmon_temp_offset) {
1373 if (data->have_temp_offset & (1 << channel))
1374 return 0644;
1375 else
1376 return 0;
1377 }
1378 break;
1379
1380 case hwmon_fan:
1381 /* channel 0.., name 1.. */
1382 if (!(data->has_fan & (1 << channel)))
1383 return 0;
1384 if (attr == hwmon_fan_input || attr == hwmon_fan_alarm)
1385 return 0444;
1386 if (attr == hwmon_fan_div) {
1387 return 0444;
1388 }
1389 if (attr == hwmon_fan_min) {
1390 if (data->has_fan_min & (1 << channel))
1391 return 0644;
1392 else
1393 return 0;
1394 }
1395 break;
1396
1397 case hwmon_in:
1398 /* channel 0.., name 0.. */
1399 if (channel >= data->in_num)
1400 return 0;
1401 if (channel == 6 && data->in6_skip)
1402 return 0;
1403 if (attr == hwmon_in_alarm || attr == hwmon_in_input)
1404 return 0444;
1405 if (attr == hwmon_in_min || attr == hwmon_in_max)
1406 return 0644;
1407 break;
1408
1409 case hwmon_pwm:
1410 /* channel 0.., name 1.. */
1411 if (!(data->has_fan & (1 << channel)) ||
1412 channel >= data->pwm_num)
1413 return 0;
1414 if (attr == hwmon_pwm_mode || attr == hwmon_pwm_enable ||
1415 attr == hwmon_pwm_input)
1416 return 0644;
1417 break;
1418
1419 case hwmon_intrusion:
1420 return 0644;
1421
1422 default: /* Shouldn't happen */
1423 return 0;
1424 }
1425
1426 return 0; /* Shouldn't happen */
1427 }
1428
1429 static int
w83627ehf_do_read_temp(struct w83627ehf_data * data,u32 attr,int channel,long * val)1430 w83627ehf_do_read_temp(struct w83627ehf_data *data, u32 attr,
1431 int channel, long *val)
1432 {
1433 switch (attr) {
1434 case hwmon_temp_input:
1435 *val = LM75_TEMP_FROM_REG(data->temp[channel]);
1436 return 0;
1437 case hwmon_temp_max:
1438 *val = LM75_TEMP_FROM_REG(data->temp_max[channel]);
1439 return 0;
1440 case hwmon_temp_max_hyst:
1441 *val = LM75_TEMP_FROM_REG(data->temp_max_hyst[channel]);
1442 return 0;
1443 case hwmon_temp_offset:
1444 *val = data->temp_offset[channel] * 1000;
1445 return 0;
1446 case hwmon_temp_type:
1447 *val = (int)data->temp_type[channel];
1448 return 0;
1449 case hwmon_temp_alarm:
1450 if (channel < 3) {
1451 int bit[] = { 4, 5, 13 };
1452 *val = (data->alarms >> bit[channel]) & 1;
1453 return 0;
1454 }
1455 break;
1456
1457 default:
1458 break;
1459 }
1460
1461 return -EOPNOTSUPP;
1462 }
1463
1464 static int
w83627ehf_do_read_in(struct w83627ehf_data * data,u32 attr,int channel,long * val)1465 w83627ehf_do_read_in(struct w83627ehf_data *data, u32 attr,
1466 int channel, long *val)
1467 {
1468 switch (attr) {
1469 case hwmon_in_input:
1470 *val = in_from_reg(data->in[channel], channel, data->scale_in);
1471 return 0;
1472 case hwmon_in_min:
1473 *val = in_from_reg(data->in_min[channel], channel,
1474 data->scale_in);
1475 return 0;
1476 case hwmon_in_max:
1477 *val = in_from_reg(data->in_max[channel], channel,
1478 data->scale_in);
1479 return 0;
1480 case hwmon_in_alarm:
1481 if (channel < 10) {
1482 int bit[] = { 0, 1, 2, 3, 8, 21, 20, 16, 17, 19 };
1483 *val = (data->alarms >> bit[channel]) & 1;
1484 return 0;
1485 }
1486 break;
1487 default:
1488 break;
1489 }
1490 return -EOPNOTSUPP;
1491 }
1492
1493 static int
w83627ehf_do_read_fan(struct w83627ehf_data * data,u32 attr,int channel,long * val)1494 w83627ehf_do_read_fan(struct w83627ehf_data *data, u32 attr,
1495 int channel, long *val)
1496 {
1497 switch (attr) {
1498 case hwmon_fan_input:
1499 *val = data->rpm[channel];
1500 return 0;
1501 case hwmon_fan_min:
1502 *val = fan_from_reg8(data->fan_min[channel],
1503 data->fan_div[channel]);
1504 return 0;
1505 case hwmon_fan_div:
1506 *val = div_from_reg(data->fan_div[channel]);
1507 return 0;
1508 case hwmon_fan_alarm:
1509 if (channel < 5) {
1510 int bit[] = { 6, 7, 11, 10, 23 };
1511 *val = (data->alarms >> bit[channel]) & 1;
1512 return 0;
1513 }
1514 break;
1515 default:
1516 break;
1517 }
1518 return -EOPNOTSUPP;
1519 }
1520
1521 static int
w83627ehf_do_read_pwm(struct w83627ehf_data * data,u32 attr,int channel,long * val)1522 w83627ehf_do_read_pwm(struct w83627ehf_data *data, u32 attr,
1523 int channel, long *val)
1524 {
1525 switch (attr) {
1526 case hwmon_pwm_input:
1527 *val = data->pwm[channel];
1528 return 0;
1529 case hwmon_pwm_enable:
1530 *val = data->pwm_enable[channel];
1531 return 0;
1532 case hwmon_pwm_mode:
1533 *val = data->pwm_enable[channel];
1534 return 0;
1535 default:
1536 break;
1537 }
1538 return -EOPNOTSUPP;
1539 }
1540
1541 static int
w83627ehf_do_read_intrusion(struct w83627ehf_data * data,u32 attr,int channel,long * val)1542 w83627ehf_do_read_intrusion(struct w83627ehf_data *data, u32 attr,
1543 int channel, long *val)
1544 {
1545 if (attr != hwmon_intrusion_alarm || channel != 0)
1546 return -EOPNOTSUPP; /* shouldn't happen */
1547
1548 *val = !!(data->caseopen & 0x10);
1549 return 0;
1550 }
1551
1552 static int
w83627ehf_read(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,long * val)1553 w83627ehf_read(struct device *dev, enum hwmon_sensor_types type,
1554 u32 attr, int channel, long *val)
1555 {
1556 struct w83627ehf_data *data = w83627ehf_update_device(dev->parent);
1557
1558 switch (type) {
1559 case hwmon_fan:
1560 return w83627ehf_do_read_fan(data, attr, channel, val);
1561
1562 case hwmon_in:
1563 return w83627ehf_do_read_in(data, attr, channel, val);
1564
1565 case hwmon_pwm:
1566 return w83627ehf_do_read_pwm(data, attr, channel, val);
1567
1568 case hwmon_temp:
1569 return w83627ehf_do_read_temp(data, attr, channel, val);
1570
1571 case hwmon_intrusion:
1572 return w83627ehf_do_read_intrusion(data, attr, channel, val);
1573
1574 default:
1575 break;
1576 }
1577
1578 return -EOPNOTSUPP;
1579 }
1580
1581 static int
w83627ehf_read_string(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,const char ** str)1582 w83627ehf_read_string(struct device *dev, enum hwmon_sensor_types type,
1583 u32 attr, int channel, const char **str)
1584 {
1585 struct w83627ehf_data *data = dev_get_drvdata(dev);
1586
1587 switch (type) {
1588 case hwmon_temp:
1589 if (attr == hwmon_temp_label) {
1590 *str = data->temp_label[data->temp_src[channel]];
1591 return 0;
1592 }
1593 break;
1594
1595 default:
1596 break;
1597 }
1598 /* Nothing else should be read as a string */
1599 return -EOPNOTSUPP;
1600 }
1601
1602 static int
w83627ehf_write(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,long val)1603 w83627ehf_write(struct device *dev, enum hwmon_sensor_types type,
1604 u32 attr, int channel, long val)
1605 {
1606 struct w83627ehf_data *data = dev_get_drvdata(dev);
1607
1608 if (type == hwmon_in && attr == hwmon_in_min)
1609 return store_in_min(dev, data, channel, val);
1610 if (type == hwmon_in && attr == hwmon_in_max)
1611 return store_in_max(dev, data, channel, val);
1612
1613 if (type == hwmon_fan && attr == hwmon_fan_min)
1614 return store_fan_min(dev, data, channel, val);
1615
1616 if (type == hwmon_temp && attr == hwmon_temp_max)
1617 return store_temp_max(dev, data, channel, val);
1618 if (type == hwmon_temp && attr == hwmon_temp_max_hyst)
1619 return store_temp_max_hyst(dev, data, channel, val);
1620 if (type == hwmon_temp && attr == hwmon_temp_offset)
1621 return store_temp_offset(dev, data, channel, val);
1622
1623 if (type == hwmon_pwm && attr == hwmon_pwm_mode)
1624 return store_pwm_mode(dev, data, channel, val);
1625 if (type == hwmon_pwm && attr == hwmon_pwm_enable)
1626 return store_pwm_enable(dev, data, channel, val);
1627 if (type == hwmon_pwm && attr == hwmon_pwm_input)
1628 return store_pwm(dev, data, channel, val);
1629
1630 if (type == hwmon_intrusion && attr == hwmon_intrusion_alarm)
1631 return clear_caseopen(dev, data, channel, val);
1632
1633 return -EOPNOTSUPP;
1634 }
1635
1636 static const struct hwmon_ops w83627ehf_ops = {
1637 .is_visible = w83627ehf_is_visible,
1638 .read = w83627ehf_read,
1639 .read_string = w83627ehf_read_string,
1640 .write = w83627ehf_write,
1641 };
1642
1643 static const struct hwmon_channel_info * const w83627ehf_info[] = {
1644 HWMON_CHANNEL_INFO(fan,
1645 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
1646 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
1647 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
1648 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN,
1649 HWMON_F_ALARM | HWMON_F_DIV | HWMON_F_INPUT | HWMON_F_MIN),
1650 HWMON_CHANNEL_INFO(in,
1651 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1652 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1653 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1654 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1655 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1656 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1657 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1658 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1659 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN,
1660 HWMON_I_ALARM | HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_MIN),
1661 HWMON_CHANNEL_INFO(pwm,
1662 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE,
1663 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE,
1664 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE,
1665 HWMON_PWM_ENABLE | HWMON_PWM_INPUT | HWMON_PWM_MODE),
1666 HWMON_CHANNEL_INFO(temp,
1667 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1668 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1669 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1670 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1671 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1672 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1673 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1674 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1675 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1676 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1677 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1678 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1679 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1680 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1681 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1682 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE,
1683 HWMON_T_ALARM | HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_MAX |
1684 HWMON_T_MAX_HYST | HWMON_T_OFFSET | HWMON_T_TYPE),
1685 HWMON_CHANNEL_INFO(intrusion,
1686 HWMON_INTRUSION_ALARM),
1687 NULL
1688 };
1689
1690 static const struct hwmon_chip_info w83627ehf_chip_info = {
1691 .ops = &w83627ehf_ops,
1692 .info = w83627ehf_info,
1693 };
1694
w83627ehf_probe(struct platform_device * pdev)1695 static int __init w83627ehf_probe(struct platform_device *pdev)
1696 {
1697 struct device *dev = &pdev->dev;
1698 struct w83627ehf_sio_data *sio_data = dev_get_platdata(dev);
1699 struct w83627ehf_data *data;
1700 struct resource *res;
1701 u8 en_vrm10;
1702 int i, err = 0;
1703 struct device *hwmon_dev;
1704
1705 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
1706 if (!devm_request_region(dev, res->start, IOREGION_LENGTH, DRVNAME))
1707 return -EBUSY;
1708
1709 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
1710 if (!data)
1711 return -ENOMEM;
1712
1713 data->addr = res->start;
1714 mutex_init(&data->lock);
1715 mutex_init(&data->update_lock);
1716 data->name = w83627ehf_device_names[sio_data->kind];
1717 data->bank = 0xff; /* Force initial bank selection */
1718 platform_set_drvdata(pdev, data);
1719
1720 /* 627EHG and 627EHF have 10 voltage inputs; 627DHG and 667HG have 9 */
1721 data->in_num = (sio_data->kind == w83627ehf) ? 10 : 9;
1722 /* 667HG has 3 pwms, and 627UHG has only 2 */
1723 switch (sio_data->kind) {
1724 default:
1725 data->pwm_num = 4;
1726 break;
1727 case w83667hg:
1728 case w83667hg_b:
1729 data->pwm_num = 3;
1730 break;
1731 case w83627uhg:
1732 data->pwm_num = 2;
1733 break;
1734 }
1735
1736 /* Default to 3 temperature inputs, code below will adjust as needed */
1737 data->have_temp = 0x07;
1738
1739 /* Deal with temperature register setup first. */
1740 if (sio_data->kind == w83667hg_b) {
1741 u8 reg;
1742
1743 w83627ehf_set_temp_reg_ehf(data, 4);
1744
1745 /*
1746 * Temperature sources are selected with bank 0, registers 0x49
1747 * and 0x4a.
1748 */
1749 reg = w83627ehf_read_value(data, 0x4a);
1750 data->temp_src[0] = reg >> 5;
1751 reg = w83627ehf_read_value(data, 0x49);
1752 data->temp_src[1] = reg & 0x07;
1753 data->temp_src[2] = (reg >> 4) & 0x07;
1754
1755 /*
1756 * W83667HG-B has another temperature register at 0x7e.
1757 * The temperature source is selected with register 0x7d.
1758 * Support it if the source differs from already reported
1759 * sources.
1760 */
1761 reg = w83627ehf_read_value(data, 0x7d);
1762 reg &= 0x07;
1763 if (reg != data->temp_src[0] && reg != data->temp_src[1]
1764 && reg != data->temp_src[2]) {
1765 data->temp_src[3] = reg;
1766 data->have_temp |= 1 << 3;
1767 }
1768
1769 /*
1770 * Chip supports either AUXTIN or VIN3. Try to find out which
1771 * one.
1772 */
1773 reg = w83627ehf_read_value(data, W83627EHF_REG_TEMP_CONFIG[2]);
1774 if (data->temp_src[2] == 2 && (reg & 0x01))
1775 data->have_temp &= ~(1 << 2);
1776
1777 if ((data->temp_src[2] == 2 && (data->have_temp & (1 << 2)))
1778 || (data->temp_src[3] == 2 && (data->have_temp & (1 << 3))))
1779 data->in6_skip = 1;
1780
1781 data->temp_label = w83667hg_b_temp_label;
1782 data->have_temp_offset = data->have_temp & 0x07;
1783 for (i = 0; i < 3; i++) {
1784 if (data->temp_src[i] > 2)
1785 data->have_temp_offset &= ~(1 << i);
1786 }
1787 } else if (sio_data->kind == w83627uhg) {
1788 u8 reg;
1789
1790 w83627ehf_set_temp_reg_ehf(data, 3);
1791
1792 /*
1793 * Temperature sources for temp2 and temp3 are selected with
1794 * bank 0, registers 0x49 and 0x4a.
1795 */
1796 data->temp_src[0] = 0; /* SYSTIN */
1797 reg = w83627ehf_read_value(data, 0x49) & 0x07;
1798 /* Adjust to have the same mapping as other source registers */
1799 if (reg == 0)
1800 data->temp_src[1] = 1;
1801 else if (reg >= 2 && reg <= 5)
1802 data->temp_src[1] = reg + 2;
1803 else /* should never happen */
1804 data->have_temp &= ~(1 << 1);
1805 reg = w83627ehf_read_value(data, 0x4a);
1806 data->temp_src[2] = reg >> 5;
1807
1808 /*
1809 * Skip temp3 if source is invalid or the same as temp1
1810 * or temp2.
1811 */
1812 if (data->temp_src[2] == 2 || data->temp_src[2] == 3 ||
1813 data->temp_src[2] == data->temp_src[0] ||
1814 ((data->have_temp & (1 << 1)) &&
1815 data->temp_src[2] == data->temp_src[1]))
1816 data->have_temp &= ~(1 << 2);
1817 else
1818 data->temp3_val_only = 1; /* No limit regs */
1819
1820 data->in6_skip = 1; /* No VIN3 */
1821
1822 data->temp_label = w83667hg_b_temp_label;
1823 data->have_temp_offset = data->have_temp & 0x03;
1824 for (i = 0; i < 3; i++) {
1825 if (data->temp_src[i] > 1)
1826 data->have_temp_offset &= ~(1 << i);
1827 }
1828 } else {
1829 w83627ehf_set_temp_reg_ehf(data, 3);
1830
1831 /* Temperature sources are fixed */
1832
1833 if (sio_data->kind == w83667hg) {
1834 u8 reg;
1835
1836 /*
1837 * Chip supports either AUXTIN or VIN3. Try to find
1838 * out which one.
1839 */
1840 reg = w83627ehf_read_value(data,
1841 W83627EHF_REG_TEMP_CONFIG[2]);
1842 if (reg & 0x01)
1843 data->have_temp &= ~(1 << 2);
1844 else
1845 data->in6_skip = 1;
1846 }
1847 data->have_temp_offset = data->have_temp & 0x07;
1848 }
1849
1850 if (sio_data->kind == w83667hg_b) {
1851 data->REG_FAN_MAX_OUTPUT =
1852 W83627EHF_REG_FAN_MAX_OUTPUT_W83667_B;
1853 data->REG_FAN_STEP_OUTPUT =
1854 W83627EHF_REG_FAN_STEP_OUTPUT_W83667_B;
1855 } else {
1856 data->REG_FAN_MAX_OUTPUT =
1857 W83627EHF_REG_FAN_MAX_OUTPUT_COMMON;
1858 data->REG_FAN_STEP_OUTPUT =
1859 W83627EHF_REG_FAN_STEP_OUTPUT_COMMON;
1860 }
1861
1862 /* Setup input voltage scaling factors */
1863 if (sio_data->kind == w83627uhg)
1864 data->scale_in = scale_in_w83627uhg;
1865 else
1866 data->scale_in = scale_in_common;
1867
1868 /* Initialize the chip */
1869 w83627ehf_init_device(data, sio_data->kind);
1870
1871 data->vrm = vid_which_vrm();
1872
1873 err = superio_enter(sio_data->sioreg);
1874 if (err)
1875 return err;
1876
1877 /* Read VID value */
1878 if (sio_data->kind == w83667hg || sio_data->kind == w83667hg_b) {
1879 /*
1880 * W83667HG has different pins for VID input and output, so
1881 * we can get the VID input values directly at logical device D
1882 * 0xe3.
1883 */
1884 superio_select(sio_data->sioreg, W83667HG_LD_VID);
1885 data->vid = superio_inb(sio_data->sioreg, 0xe3);
1886 data->have_vid = true;
1887 } else if (sio_data->kind != w83627uhg) {
1888 superio_select(sio_data->sioreg, W83627EHF_LD_HWM);
1889 if (superio_inb(sio_data->sioreg, SIO_REG_VID_CTRL) & 0x80) {
1890 /*
1891 * Set VID input sensibility if needed. In theory the
1892 * BIOS should have set it, but in practice it's not
1893 * always the case. We only do it for the W83627EHF/EHG
1894 * because the W83627DHG is more complex in this
1895 * respect.
1896 */
1897 if (sio_data->kind == w83627ehf) {
1898 en_vrm10 = superio_inb(sio_data->sioreg,
1899 SIO_REG_EN_VRM10);
1900 if ((en_vrm10 & 0x08) && data->vrm == 90) {
1901 dev_warn(dev,
1902 "Setting VID input voltage to TTL\n");
1903 superio_outb(sio_data->sioreg,
1904 SIO_REG_EN_VRM10,
1905 en_vrm10 & ~0x08);
1906 } else if (!(en_vrm10 & 0x08)
1907 && data->vrm == 100) {
1908 dev_warn(dev,
1909 "Setting VID input voltage to VRM10\n");
1910 superio_outb(sio_data->sioreg,
1911 SIO_REG_EN_VRM10,
1912 en_vrm10 | 0x08);
1913 }
1914 }
1915
1916 data->vid = superio_inb(sio_data->sioreg,
1917 SIO_REG_VID_DATA);
1918 if (sio_data->kind == w83627ehf) /* 6 VID pins only */
1919 data->vid &= 0x3f;
1920 data->have_vid = true;
1921 } else {
1922 dev_info(dev,
1923 "VID pins in output mode, CPU VID not available\n");
1924 }
1925 }
1926
1927 w83627ehf_check_fan_inputs(sio_data, data);
1928
1929 superio_exit(sio_data->sioreg);
1930
1931 /* Read fan clock dividers immediately */
1932 w83627ehf_update_fan_div(data);
1933
1934 /* Read pwm data to save original values */
1935 w83627ehf_update_pwm(data);
1936 for (i = 0; i < data->pwm_num; i++)
1937 data->pwm_enable_orig[i] = data->pwm_enable[i];
1938
1939 hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
1940 data->name,
1941 data,
1942 &w83627ehf_chip_info,
1943 w83627ehf_groups);
1944 return PTR_ERR_OR_ZERO(hwmon_dev);
1945 }
1946
w83627ehf_suspend(struct device * dev)1947 static int w83627ehf_suspend(struct device *dev)
1948 {
1949 struct w83627ehf_data *data = w83627ehf_update_device(dev);
1950
1951 mutex_lock(&data->update_lock);
1952 data->vbat = w83627ehf_read_value(data, W83627EHF_REG_VBAT);
1953 mutex_unlock(&data->update_lock);
1954
1955 return 0;
1956 }
1957
w83627ehf_resume(struct device * dev)1958 static int w83627ehf_resume(struct device *dev)
1959 {
1960 struct w83627ehf_data *data = dev_get_drvdata(dev);
1961 int i;
1962
1963 mutex_lock(&data->update_lock);
1964 data->bank = 0xff; /* Force initial bank selection */
1965
1966 /* Restore limits */
1967 for (i = 0; i < data->in_num; i++) {
1968 if ((i == 6) && data->in6_skip)
1969 continue;
1970
1971 w83627ehf_write_value(data, W83627EHF_REG_IN_MIN(i),
1972 data->in_min[i]);
1973 w83627ehf_write_value(data, W83627EHF_REG_IN_MAX(i),
1974 data->in_max[i]);
1975 }
1976
1977 for (i = 0; i < 5; i++) {
1978 if (!(data->has_fan_min & (1 << i)))
1979 continue;
1980
1981 w83627ehf_write_value(data, W83627EHF_REG_FAN_MIN[i],
1982 data->fan_min[i]);
1983 }
1984
1985 for (i = 0; i < NUM_REG_TEMP; i++) {
1986 if (!(data->have_temp & (1 << i)))
1987 continue;
1988
1989 if (data->reg_temp_over[i])
1990 w83627ehf_write_temp(data, data->reg_temp_over[i],
1991 data->temp_max[i]);
1992 if (data->reg_temp_hyst[i])
1993 w83627ehf_write_temp(data, data->reg_temp_hyst[i],
1994 data->temp_max_hyst[i]);
1995 if (i > 2)
1996 continue;
1997 if (data->have_temp_offset & (1 << i))
1998 w83627ehf_write_value(data,
1999 W83627EHF_REG_TEMP_OFFSET[i],
2000 data->temp_offset[i]);
2001 }
2002
2003 /* Restore other settings */
2004 w83627ehf_write_value(data, W83627EHF_REG_VBAT, data->vbat);
2005
2006 /* Force re-reading all values */
2007 data->valid = false;
2008 mutex_unlock(&data->update_lock);
2009
2010 return 0;
2011 }
2012
2013 static DEFINE_SIMPLE_DEV_PM_OPS(w83627ehf_dev_pm_ops, w83627ehf_suspend, w83627ehf_resume);
2014
2015 static struct platform_driver w83627ehf_driver = {
2016 .driver = {
2017 .name = DRVNAME,
2018 .pm = pm_sleep_ptr(&w83627ehf_dev_pm_ops),
2019 },
2020 };
2021
2022 /* w83627ehf_find() looks for a '627 in the Super-I/O config space */
w83627ehf_find(int sioaddr,unsigned short * addr,struct w83627ehf_sio_data * sio_data)2023 static int __init w83627ehf_find(int sioaddr, unsigned short *addr,
2024 struct w83627ehf_sio_data *sio_data)
2025 {
2026 static const char sio_name_W83627EHF[] __initconst = "W83627EHF";
2027 static const char sio_name_W83627EHG[] __initconst = "W83627EHG";
2028 static const char sio_name_W83627DHG[] __initconst = "W83627DHG";
2029 static const char sio_name_W83627DHG_P[] __initconst = "W83627DHG-P";
2030 static const char sio_name_W83627UHG[] __initconst = "W83627UHG";
2031 static const char sio_name_W83667HG[] __initconst = "W83667HG";
2032 static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B";
2033
2034 u16 val;
2035 const char *sio_name;
2036 int err;
2037
2038 err = superio_enter(sioaddr);
2039 if (err)
2040 return err;
2041
2042 if (force_id)
2043 val = force_id;
2044 else
2045 val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8)
2046 | superio_inb(sioaddr, SIO_REG_DEVID + 1);
2047 switch (val & SIO_ID_MASK) {
2048 case SIO_W83627EHF_ID:
2049 sio_data->kind = w83627ehf;
2050 sio_name = sio_name_W83627EHF;
2051 break;
2052 case SIO_W83627EHG_ID:
2053 sio_data->kind = w83627ehf;
2054 sio_name = sio_name_W83627EHG;
2055 break;
2056 case SIO_W83627DHG_ID:
2057 sio_data->kind = w83627dhg;
2058 sio_name = sio_name_W83627DHG;
2059 break;
2060 case SIO_W83627DHG_P_ID:
2061 sio_data->kind = w83627dhg_p;
2062 sio_name = sio_name_W83627DHG_P;
2063 break;
2064 case SIO_W83627UHG_ID:
2065 sio_data->kind = w83627uhg;
2066 sio_name = sio_name_W83627UHG;
2067 break;
2068 case SIO_W83667HG_ID:
2069 sio_data->kind = w83667hg;
2070 sio_name = sio_name_W83667HG;
2071 break;
2072 case SIO_W83667HG_B_ID:
2073 sio_data->kind = w83667hg_b;
2074 sio_name = sio_name_W83667HG_B;
2075 break;
2076 default:
2077 if (val != 0xffff)
2078 pr_debug("unsupported chip ID: 0x%04x\n", val);
2079 superio_exit(sioaddr);
2080 return -ENODEV;
2081 }
2082
2083 /* We have a known chip, find the HWM I/O address */
2084 superio_select(sioaddr, W83627EHF_LD_HWM);
2085 val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8)
2086 | superio_inb(sioaddr, SIO_REG_ADDR + 1);
2087 *addr = val & IOREGION_ALIGNMENT;
2088 if (*addr == 0) {
2089 pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
2090 superio_exit(sioaddr);
2091 return -ENODEV;
2092 }
2093
2094 /* Activate logical device if needed */
2095 val = superio_inb(sioaddr, SIO_REG_ENABLE);
2096 if (!(val & 0x01)) {
2097 pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
2098 superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
2099 }
2100
2101 superio_exit(sioaddr);
2102 pr_info("Found %s chip at %#x\n", sio_name, *addr);
2103 sio_data->sioreg = sioaddr;
2104
2105 return 0;
2106 }
2107
2108 /*
2109 * when Super-I/O functions move to a separate file, the Super-I/O
2110 * bus will manage the lifetime of the device and this module will only keep
2111 * track of the w83627ehf driver.
2112 */
2113 static struct platform_device *pdev;
2114
sensors_w83627ehf_init(void)2115 static int __init sensors_w83627ehf_init(void)
2116 {
2117 int err;
2118 unsigned short address;
2119 struct resource res = {
2120 .name = DRVNAME,
2121 .flags = IORESOURCE_IO,
2122 };
2123 struct w83627ehf_sio_data sio_data;
2124
2125 /*
2126 * initialize sio_data->kind and sio_data->sioreg.
2127 *
2128 * when Super-I/O functions move to a separate file, the Super-I/O
2129 * driver will probe 0x2e and 0x4e and auto-detect the presence of a
2130 * w83627ehf hardware monitor, and call probe()
2131 */
2132 if (w83627ehf_find(0x2e, &address, &sio_data) &&
2133 w83627ehf_find(0x4e, &address, &sio_data))
2134 return -ENODEV;
2135
2136 res.start = address + IOREGION_OFFSET;
2137 res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
2138
2139 err = acpi_check_resource_conflict(&res);
2140 if (err)
2141 return err;
2142
2143 pdev = platform_create_bundle(&w83627ehf_driver, w83627ehf_probe, &res, 1, &sio_data,
2144 sizeof(struct w83627ehf_sio_data));
2145
2146 return PTR_ERR_OR_ZERO(pdev);
2147 }
2148
sensors_w83627ehf_exit(void)2149 static void __exit sensors_w83627ehf_exit(void)
2150 {
2151 platform_device_unregister(pdev);
2152 platform_driver_unregister(&w83627ehf_driver);
2153 }
2154
2155 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
2156 MODULE_DESCRIPTION("W83627EHF driver");
2157 MODULE_LICENSE("GPL");
2158
2159 module_init(sensors_w83627ehf_init);
2160 module_exit(sensors_w83627ehf_exit);
2161