1 // SPDX-License-Identifier: GPL-2.0
2 /***************************************************************************/
3 
4 /*
5  *	m5249.c  -- platform support for ColdFire 5249 based boards
6  *
7  *	Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
8  */
9 
10 /***************************************************************************/
11 
12 #include <linux/clkdev.h>
13 #include <linux/kernel.h>
14 #include <linux/param.h>
15 #include <linux/init.h>
16 #include <linux/io.h>
17 #include <linux/platform_device.h>
18 #include <asm/machdep.h>
19 #include <asm/coldfire.h>
20 #include <asm/mcfsim.h>
21 #include <asm/mcfclk.h>
22 
23 /***************************************************************************/
24 
25 DEFINE_CLK(pll, "pll.0", MCF_CLK);
26 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
27 
28 struct clk_lookup m5249_clk_lookup[] = {
29 	CLKDEV_INIT(NULL, "pll.0", &clk_pll),
30 	CLKDEV_INIT(NULL, "sys.0", &clk_sys),
31 	CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
32 	CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),
33 	CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
34 	CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
35 	CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys),
36 	CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
37 	CLKDEV_INIT("imx1-i2c.1", NULL, &clk_sys),
38 };
39 
40 /***************************************************************************/
41 
42 #ifdef CONFIG_M5249C3
43 
44 static struct resource m5249_smc91x_resources[] = {
45 	{
46 		.start		= 0xe0000300,
47 		.end		= 0xe0000300 + 0x100,
48 		.flags		= IORESOURCE_MEM,
49 	},
50 	{
51 		.start		= MCF_IRQ_GPIO6,
52 		.end		= MCF_IRQ_GPIO6,
53 		.flags		= IORESOURCE_IRQ,
54 	},
55 };
56 
57 static struct platform_device m5249_smc91x = {
58 	.name			= "smc91x",
59 	.id			= 0,
60 	.num_resources		= ARRAY_SIZE(m5249_smc91x_resources),
61 	.resource		= m5249_smc91x_resources,
62 };
63 
64 #endif /* CONFIG_M5249C3 */
65 
66 static struct platform_device *m5249_devices[] __initdata = {
67 #ifdef CONFIG_M5249C3
68 	&m5249_smc91x,
69 #endif
70 };
71 
72 /***************************************************************************/
73 
m5249_qspi_init(void)74 static void __init m5249_qspi_init(void)
75 {
76 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
77 	/* QSPI irq setup */
78 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
79 	       MCFSIM_QSPIICR);
80 	mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
81 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
82 }
83 
84 /***************************************************************************/
85 
m5249_i2c_init(void)86 static void __init m5249_i2c_init(void)
87 {
88 #if IS_ENABLED(CONFIG_I2C_IMX)
89 	u32 r;
90 
91 	/* first I2C controller uses regular irq setup */
92 	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0,
93 	       MCFSIM_I2CICR);
94 	mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C);
95 
96 	/* second I2C controller is completely different */
97 	r = readl(MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
98 	r &= ~MCFINTC2_INTPRI_BITS(0xf, MCF_IRQ_I2C1);
99 	r |= MCFINTC2_INTPRI_BITS(0x5, MCF_IRQ_I2C1);
100 	writel(r, MCFINTC2_INTPRI_REG(MCF_IRQ_I2C1));
101 #endif /* CONFIG_I2C_IMX */
102 }
103 
104 /***************************************************************************/
105 
106 #ifdef CONFIG_M5249C3
107 
m5249_smc91x_init(void)108 static void __init m5249_smc91x_init(void)
109 {
110 	u32  gpio;
111 
112 	/* Set the GPIO line as interrupt source for smc91x device */
113 	gpio = readl(MCFSIM2_GPIOINTENABLE);
114 	writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE);
115 
116 	gpio = readl(MCFINTC2_INTPRI5);
117 	writel(gpio | 0x04000000, MCFINTC2_INTPRI5);
118 }
119 
120 #endif /* CONFIG_M5249C3 */
121 
122 /***************************************************************************/
123 
config_BSP(char * commandp,int size)124 void __init config_BSP(char *commandp, int size)
125 {
126 	mach_sched_init = hw_timer_init;
127 
128 #ifdef CONFIG_M5249C3
129 	m5249_smc91x_init();
130 #endif
131 	m5249_qspi_init();
132 	m5249_i2c_init();
133 
134 	clkdev_add_table(m5249_clk_lookup, ARRAY_SIZE(m5249_clk_lookup));
135 }
136 
137 /***************************************************************************/
138 
init_BSP(void)139 static int __init init_BSP(void)
140 {
141 	platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
142 	return 0;
143 }
144 
145 arch_initcall(init_BSP);
146 
147 /***************************************************************************/
148