1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Samsung Galaxy Book2 4 * 5 * Copyright (c) 2022, Xilin Wu <strongtz@yeah.net> 6 */ 7 8/dts-v1/; 9 10#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 11#include <dt-bindings/input/gpio-keys.h> 12#include <dt-bindings/input/input.h> 13#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 14#include <dt-bindings/sound/qcom,q6afe.h> 15#include <dt-bindings/sound/qcom,q6asm.h> 16#include "sdm850.dtsi" 17#include "sdm845-wcd9340.dtsi" 18#include "pm8998.dtsi" 19 20/* 21 * Update following upstream (sdm845.dtsi) reserved 22 * memory mappings for firmware loading to succeed 23 */ 24/delete-node/ &qseecom_mem; 25/delete-node/ &wlan_msa_mem; 26/delete-node/ &slpi_mem; 27/delete-node/ &ipa_fw_mem; 28/delete-node/ &ipa_gsi_mem; 29/delete-node/ &gpu_mem; 30/delete-node/ &mpss_region; 31/delete-node/ &adsp_mem; 32/delete-node/ &cdsp_mem; 33/delete-node/ &venus_mem; 34/delete-node/ &mba_region; 35/delete-node/ &spss_mem; 36 37/ { 38 model = "Samsung Galaxy Book2"; 39 compatible = "samsung,w737", "qcom,sdm845"; 40 chassis-type = "convertible"; 41 42 chosen { 43 #address-cells = <2>; 44 #size-cells = <2>; 45 ranges; 46 47 /* Firmware initialized the display at 1280p instead of 1440p */ 48 framebuffer0: framebuffer@80400000 { 49 compatible = "simple-framebuffer"; 50 reg = <0 0x80400000 0 (1920 * 1280 * 4)>; 51 width = <1920>; 52 height = <1280>; 53 stride = <(1920 * 4)>; 54 format = "a8r8g8b8"; 55 }; 56 }; 57 58 aliases { 59 serial1 = &uart6; 60 }; 61 62 /* Reserved memory changes */ 63 reserved-memory { 64 /* Bootloader display framebuffer region */ 65 cont_splash_mem: memory@80400000 { 66 reg = <0x0 0x80400000 0x0 0x960000>; 67 no-map; 68 }; 69 70 qseecom_mem: memory@8b500000 { 71 reg = <0 0x8b500000 0 0xa00000>; 72 no-map; 73 }; 74 75 wlan_msa_mem: memory@8c400000 { 76 reg = <0 0x8c400000 0 0x100000>; 77 no-map; 78 }; 79 80 slpi_mem: memory@8c500000 { 81 reg = <0 0x8c500000 0 0x1200000>; 82 no-map; 83 }; 84 85 ipa_fw_mem: memory@8d700000 { 86 reg = <0 0x8d700000 0 0x100000>; 87 no-map; 88 }; 89 90 gpu_mem: memory@8d800000 { 91 reg = <0 0x8d800000 0 0x5000>; 92 no-map; 93 }; 94 95 mpss_region: memory@8e000000 { 96 reg = <0 0x8e000000 0 0x8000000>; 97 no-map; 98 }; 99 100 adsp_mem: memory@96000000 { 101 reg = <0 0x96000000 0 0x2000000>; 102 no-map; 103 }; 104 105 cdsp_mem: memory@98000000 { 106 reg = <0 0x98000000 0 0x800000>; 107 no-map; 108 }; 109 110 venus_mem: memory@98800000 { 111 reg = <0 0x98800000 0 0x500000>; 112 no-map; 113 }; 114 115 mba_region: memory@98d00000 { 116 reg = <0 0x98d00000 0 0x200000>; 117 no-map; 118 }; 119 120 spss_mem: memory@98f00000 { 121 reg = <0 0x98f00000 0 0x100000>; 122 no-map; 123 }; 124 }; 125}; 126 127&adsp_pas { 128 firmware-name = "qcom/sdm850/samsung/w737/qcadsp850.mbn"; 129 status = "okay"; 130}; 131 132&apps_rsc { 133 regulators-0 { 134 compatible = "qcom,pm8998-rpmh-regulators"; 135 qcom,pmic-id = "a"; 136 137 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; 138 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; 139 140 vreg_s2a_1p125: smps2 { 141 }; 142 143 vreg_s3a_1p35: smps3 { 144 regulator-min-microvolt = <1352000>; 145 regulator-max-microvolt = <1352000>; 146 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 147 }; 148 149 vreg_s4a_1p8: smps4 { 150 regulator-min-microvolt = <1800000>; 151 regulator-max-microvolt = <1800000>; 152 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 153 }; 154 155 vreg_s5a_2p04: smps5 { 156 regulator-min-microvolt = <2040000>; 157 regulator-max-microvolt = <2040000>; 158 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 159 }; 160 161 vreg_s7a_1p025: smps7 { 162 }; 163 164 vdd_qusb_hs0: 165 vdda_hp_pcie_core: 166 vdda_mipi_csi0_0p9: 167 vdda_mipi_csi1_0p9: 168 vdda_mipi_csi2_0p9: 169 vdda_mipi_dsi0_pll: 170 vdda_mipi_dsi1_pll: 171 vdda_qlink_lv: 172 vdda_qlink_lv_ck: 173 vdda_qrefs_0p875: 174 vdda_pcie_core: 175 vdda_pll_cc_ebi01: 176 vdda_pll_cc_ebi23: 177 vdda_sp_sensor: 178 vdda_ufs1_core: 179 vdda_ufs2_core: 180 vdda_usb1_ss_core: 181 vdda_usb2_ss_core: 182 vreg_l1a_0p875: ldo1 { 183 regulator-min-microvolt = <880000>; 184 regulator-max-microvolt = <880000>; 185 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 186 }; 187 188 vddpx_10: 189 vreg_l2a_1p2: ldo2 { 190 regulator-min-microvolt = <1200000>; 191 regulator-max-microvolt = <1200000>; 192 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 193 regulator-always-on; 194 }; 195 196 vreg_l3a_1p0: ldo3 { 197 }; 198 199 vdd_wcss_cx: 200 vdd_wcss_mx: 201 vdda_wcss_pll: 202 vreg_l5a_0p8: ldo5 { 203 regulator-min-microvolt = <800000>; 204 regulator-max-microvolt = <800000>; 205 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 206 }; 207 208 vddpx_13: 209 vreg_l6a_1p8: ldo6 { 210 regulator-min-microvolt = <1800000>; 211 regulator-max-microvolt = <1800000>; 212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 213 }; 214 215 vreg_l7a_1p8: ldo7 { 216 regulator-min-microvolt = <1800000>; 217 regulator-max-microvolt = <1800000>; 218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 219 }; 220 221 vreg_l8a_1p2: ldo8 { 222 }; 223 224 vreg_l9a_1p8: ldo9 { 225 }; 226 227 vreg_l10a_1p8: ldo10 { 228 }; 229 230 vreg_l11a_1p0: ldo11 { 231 }; 232 233 vdd_qfprom: 234 vdd_qfprom_sp: 235 vdda_apc1_cs_1p8: 236 vdda_gfx_cs_1p8: 237 vdda_qrefs_1p8: 238 vdda_qusb_hs0_1p8: 239 vddpx_11: 240 vreg_l12a_1p8: ldo12 { 241 regulator-min-microvolt = <1800000>; 242 regulator-max-microvolt = <1800000>; 243 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 244 }; 245 246 vddpx_2: 247 vreg_l13a_2p95: ldo13 { 248 }; 249 250 vreg_l14a_1p88: ldo14 { 251 regulator-min-microvolt = <1880000>; 252 regulator-max-microvolt = <1880000>; 253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 254 regulator-always-on; 255 }; 256 257 vreg_l15a_1p8: ldo15 { 258 }; 259 260 vreg_l16a_2p7: ldo16 { 261 }; 262 263 vreg_l17a_1p3: ldo17 { 264 regulator-min-microvolt = <1304000>; 265 regulator-max-microvolt = <1304000>; 266 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 267 }; 268 269 vreg_l18a_1p8: ldo18 { 270 }; 271 272 vreg_l19a_3p0: ldo19 { 273 regulator-min-microvolt = <3100000>; 274 regulator-max-microvolt = <3108000>; 275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 276 }; 277 278 vreg_l20a_2p95: ldo20 { 279 regulator-min-microvolt = <2960000>; 280 regulator-max-microvolt = <2960000>; 281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 282 }; 283 284 vreg_l21a_2p95: ldo21 { 285 }; 286 287 vreg_l22a_2p85: ldo22 { 288 }; 289 290 vreg_l23a_3p3: ldo23 { 291 regulator-min-microvolt = <3300000>; 292 regulator-max-microvolt = <3312000>; 293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 294 }; 295 296 vdda_qusb_hs0_3p1: 297 vreg_l24a_3p075: ldo24 { 298 regulator-min-microvolt = <3075000>; 299 regulator-max-microvolt = <3083000>; 300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 301 }; 302 303 vreg_l25a_3p3: ldo25 { 304 regulator-min-microvolt = <3104000>; 305 regulator-max-microvolt = <3112000>; 306 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 307 }; 308 309 vdda_hp_pcie_1p2: 310 vdda_hv_ebi0: 311 vdda_hv_ebi1: 312 vdda_hv_ebi2: 313 vdda_hv_ebi3: 314 vdda_mipi_csi_1p25: 315 vdda_mipi_dsi0_1p2: 316 vdda_mipi_dsi1_1p2: 317 vdda_pcie_1p2: 318 vdda_ufs1_1p2: 319 vdda_ufs2_1p2: 320 vdda_usb1_ss_1p2: 321 vdda_usb2_ss_1p2: 322 vreg_l26a_1p2: ldo26 { 323 regulator-min-microvolt = <1200000>; 324 regulator-max-microvolt = <1208000>; 325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 326 }; 327 328 vreg_l28a_3p0: ldo28 { 329 }; 330 331 vreg_lvs1a_1p8: lvs1 { 332 }; 333 334 vreg_lvs2a_1p8: lvs2 { 335 }; 336 }; 337}; 338 339&cdsp_pas { 340 firmware-name = "qcom/sdm850/samsung/w737/qccdsp850.mbn"; 341 status = "okay"; 342}; 343 344&gcc { 345 protected-clocks = <GCC_QSPI_CORE_CLK>, 346 <GCC_QSPI_CORE_CLK_SRC>, 347 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 348 <GCC_LPASS_Q6_AXI_CLK>, 349 <GCC_LPASS_SWAY_CLK>; 350}; 351 352&i2c10 { 353 status = "okay"; 354 clock-frequency = <400000>; 355 356 /* SN65DSI86 @ 0x2c */ 357 /* The panel requires dual DSI, which is not supported by the bridge driver */ 358}; 359 360&i2c11 { 361 status = "okay"; 362 clock-frequency = <400000>; 363 364 /* HID-I2C Touchscreen @ 0x20 */ 365}; 366 367&i2c15 { 368 status = "okay"; 369 clock-frequency = <400000>; 370 371 digitizer@9 { 372 compatible = "wacom,w9013", "hid-over-i2c"; 373 reg = <0x9>; 374 pinctrl-names = "default"; 375 pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; 376 377 post-power-on-delay-ms = <120>; 378 379 interrupt-parent = <&tlmm>; 380 interrupts = <119 IRQ_TYPE_LEVEL_LOW>; 381 382 hid-descr-addr = <0x1>; 383 }; 384}; 385 386&ipa { 387 qcom,gsi-loader = "self"; 388 memory-region = <&ipa_fw_mem>; 389 firmware-name = "qcom/sdm850/samsung/w737/ipa_fws.elf"; 390 status = "okay"; 391}; 392 393/* No idea why it causes an SError when enabled */ 394&llcc { 395 status = "disabled"; 396}; 397 398&mss_pil { 399 status = "okay"; 400 firmware-name = "qcom/sdm850/samsung/w737/qcdsp1v2850.mbn", "qcom/sdm850/samsung/w737/qcdsp2850.mbn"; 401}; 402 403&qup_i2c10_default { 404 drive-strength = <2>; 405 bias-disable; 406}; 407 408&qup_i2c11_default { 409 drive-strength = <2>; 410 bias-disable; 411}; 412 413&qup_i2c12_default { 414 drive-strength = <2>; 415 bias-disable; 416}; 417 418&qupv3_id_0 { 419 status = "okay"; 420}; 421 422&qupv3_id_1 { 423 status = "okay"; 424}; 425 426&q6asmdai { 427 dai@0 { 428 reg = <0>; 429 }; 430 431 dai@1 { 432 reg = <1>; 433 }; 434 435 dai@2 { 436 reg = <2>; 437 }; 438}; 439 440&sound { 441 compatible = "qcom,sdm845-sndcard"; 442 model = "Samsung-W737"; 443 444 audio-routing = 445 "RX_BIAS", "MCLK", 446 "AMIC2", "MIC BIAS2", 447 "SpkrLeft IN", "SPK1 OUT", 448 "SpkrRight IN", "SPK2 OUT", 449 "MM_DL1", "MultiMedia1 Playback", 450 "MM_DL3", "MultiMedia3 Playback", 451 "MultiMedia2 Capture", "MM_UL2"; 452 453 mm1-dai-link { 454 link-name = "MultiMedia1"; 455 cpu { 456 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; 457 }; 458 }; 459 460 mm2-dai-link { 461 link-name = "MultiMedia2"; 462 cpu { 463 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; 464 }; 465 }; 466 467 mm3-dai-link { 468 link-name = "MultiMedia3"; 469 cpu { 470 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; 471 }; 472 }; 473 474 slim-dai-link { 475 link-name = "SLIM Playback"; 476 cpu { 477 sound-dai = <&q6afedai SLIMBUS_0_RX>; 478 }; 479 480 platform { 481 sound-dai = <&q6routing>; 482 }; 483 484 codec { 485 sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>; 486 }; 487 }; 488 489 slimcap-dai-link { 490 link-name = "SLIM Capture"; 491 cpu { 492 sound-dai = <&q6afedai SLIMBUS_0_TX>; 493 }; 494 495 platform { 496 sound-dai = <&q6routing>; 497 }; 498 499 codec { 500 sound-dai = <&wcd9340 1>; 501 }; 502 }; 503 504 slim-wcd-dai-link { 505 link-name = "SLIM WCD Playback"; 506 cpu { 507 sound-dai = <&q6afedai SLIMBUS_1_RX>; 508 }; 509 510 platform { 511 sound-dai = <&q6routing>; 512 }; 513 514 codec { 515 sound-dai = <&wcd9340 2>; 516 }; 517 }; 518}; 519 520&tlmm { 521 gpio-reserved-ranges = <0 6>, <85 4>; 522 523 pen_irq_l: pen-irq-l-state { 524 pins = "gpio119"; 525 function = "gpio"; 526 bias-disable; 527 }; 528 529 pen_pdct_l: pen-pdct-l-state { 530 pins = "gpio124"; 531 function = "gpio"; 532 bias-disable; 533 drive-strength = <2>; 534 output-high; 535 }; 536 537 pen_rst_l: pen-rst-l-state { 538 pins = "gpio21"; 539 function = "gpio"; 540 bias-disable; 541 drive-strength = <2>; 542 543 /* 544 * The pen driver doesn't currently support 545 * driving this reset line. By specifying 546 * output-high here we're relying on the fact 547 * that this pin has a default pulldown at boot 548 * (which makes sure the pen was in reset if it 549 * was powered) and then we set it high here to 550 * take it out of reset. Better would be if the 551 * pen driver could control this and we could 552 * remove "output-high" here. 553 */ 554 output-high; 555 }; 556}; 557 558&uart6 { 559 pinctrl-names = "default"; 560 pinctrl-0 = <&qup_uart6_4pin>; 561 status = "okay"; 562 563 bluetooth { 564 compatible = "qcom,wcn3990-bt"; 565 566 vddio-supply = <&vreg_s4a_1p8>; 567 vddxo-supply = <&vreg_l7a_1p8>; 568 vddrf-supply = <&vreg_l17a_1p3>; 569 vddch0-supply = <&vreg_l25a_3p3>; 570 vddch1-supply = <&vreg_l23a_3p3>; 571 max-speed = <3200000>; 572 }; 573}; 574 575&ufs_mem_hc { 576 status = "okay"; 577 578 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; 579 580 vcc-supply = <&vreg_l20a_2p95>; 581 vcc-max-microamp = <600000>; 582}; 583 584&ufs_mem_phy { 585 status = "okay"; 586 587 vdda-phy-supply = <&vdda_ufs1_core>; 588 vdda-pll-supply = <&vdda_ufs1_1p2>; 589}; 590 591&usb_1 { 592 status = "okay"; 593}; 594 595&usb_1_dwc3 { 596 dr_mode = "host"; 597}; 598 599&usb_1_hsphy { 600 status = "okay"; 601 602 vdd-supply = <&vdda_usb1_ss_core>; 603 vdda-pll-supply = <&vdda_qusb_hs0_1p8>; 604 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; 605 606 qcom,imp-res-offset-value = <8>; 607 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; 608 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; 609 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; 610}; 611 612&usb_1_qmpphy { 613 status = "okay"; 614 615 vdda-phy-supply = <&vdda_usb1_ss_1p2>; 616 vdda-pll-supply = <&vdda_usb1_ss_core>; 617}; 618 619&usb_2 { 620 status = "okay"; 621}; 622 623&usb_2_dwc3 { 624 dr_mode = "host"; 625}; 626 627&usb_2_hsphy { 628 status = "okay"; 629 630 vdd-supply = <&vdda_usb2_ss_core>; 631 vdda-pll-supply = <&vdda_qusb_hs0_1p8>; 632 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; 633 634 qcom,imp-res-offset-value = <8>; 635 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; 636}; 637 638&usb_2_qmpphy { 639 status = "okay"; 640 641 vdda-phy-supply = <&vdda_usb2_ss_1p2>; 642 vdda-pll-supply = <&vdda_usb2_ss_core>; 643}; 644 645&venus { 646 status = "okay"; 647 firmware-name = "qcom/sdm850/samsung/w737/qcvss850.mbn"; 648}; 649 650&wcd9340 { 651 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; 652 vdd-buck-supply = <&vreg_s4a_1p8>; 653 vdd-buck-sido-supply = <&vreg_s4a_1p8>; 654 vdd-tx-supply = <&vreg_s4a_1p8>; 655 vdd-rx-supply = <&vreg_s4a_1p8>; 656 vdd-io-supply = <&vreg_s4a_1p8>; 657 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 658 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 659 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 660 661 swm: swm@c85 { 662 left_spkr: speaker@0,3 { 663 compatible = "sdw10217211000"; 664 reg = <0 3>; 665 powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; 666 #thermal-sensor-cells = <0>; 667 sound-name-prefix = "SpkrLeft"; 668 #sound-dai-cells = <0>; 669 }; 670 671 right_spkr: speaker@0,4 { 672 compatible = "sdw10217211000"; 673 powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; 674 reg = <0 4>; 675 #thermal-sensor-cells = <0>; 676 sound-name-prefix = "SpkrRight"; 677 #sound-dai-cells = <0>; 678 }; 679 }; 680}; 681 682&wifi { 683 status = "okay"; 684 685 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; 686 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 687 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 688 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 689 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; 690 691 qcom,snoc-host-cap-8bit-quirk; 692}; 693