1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8	model = "Iomega StorCenter ix2-200";
9	compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11	memory {
12		device_type = "memory";
13		reg = <0x00000000 0x10000000>;
14	};
15
16	chosen {
17		bootargs = "console=ttyS0,115200n8 earlyprintk";
18		stdout-path = &uart0;
19	};
20
21	ocp@f1000000 {
22		pinctrl: pin-controller@10000 {
23			pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
24				      &pmx_led_sata_brt_ctrl_2
25				      &pmx_led_backup_brt_ctrl_1
26				      &pmx_led_backup_brt_ctrl_2
27				      &pmx_led_power_brt_ctrl_1
28				      &pmx_led_power_brt_ctrl_2
29				      &pmx_led_health_brt_ctrl_1
30				      &pmx_led_health_brt_ctrl_2
31				      &pmx_led_rebuild_brt_ctrl_1
32				      &pmx_led_rebuild_brt_ctrl_2 >;
33			pinctrl-names = "default";
34
35			pmx_button_reset: pmx-button-reset {
36				marvell,pins = "mpp12";
37				marvell,function = "gpio";
38			};
39			pmx_button_power: pmx-button-power {
40				marvell,pins = "mpp14";
41				marvell,function = "gpio";
42			};
43			pmx_led_backup: pmx-led-backup {
44				marvell,pins = "mpp15";
45				marvell,function = "gpio";
46			};
47			pmx_led_power: pmx-led-power {
48				marvell,pins = "mpp16";
49				marvell,function = "gpio";
50			};
51			pmx_button_otb: pmx-button-otb {
52				marvell,pins = "mpp35";
53				marvell,function = "gpio";
54			};
55			pmx_led_rebuild: pmx-led-rebuild {
56				marvell,pins = "mpp36";
57				marvell,function = "gpio";
58			};
59			pmx_led_health: pmx-led_health {
60				marvell,pins = "mpp37";
61				marvell,function = "gpio";
62			};
63			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
64				marvell,pins = "mpp38";
65				marvell,function = "gpio";
66			};
67			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
68				marvell,pins = "mpp39";
69				marvell,function = "gpio";
70			};
71			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
72				marvell,pins = "mpp40";
73				marvell,function = "gpio";
74			};
75			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
76				marvell,pins = "mpp41";
77				marvell,function = "gpio";
78			};
79			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
80				marvell,pins = "mpp42";
81				marvell,function = "gpio";
82			};
83			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
84				marvell,pins = "mpp43";
85				marvell,function = "gpio";
86			};
87			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
88				marvell,pins = "mpp44";
89				marvell,function = "gpio";
90			};
91			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
92				marvell,pins = "mpp45";
93				marvell,function = "gpio";
94			};
95			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
96				marvell,pins = "mpp46";
97				marvell,function = "gpio";
98			};
99			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
100				marvell,pins = "mpp47";
101				marvell,function = "gpio";
102			};
103
104		};
105		i2c@11000 {
106			status = "okay";
107
108			lm63: lm63@4c {
109				compatible = "national,lm63";
110				reg = <0x4c>;
111			};
112		};
113
114		serial@12000 {
115			status = "okay";
116		};
117
118		sata@80000 {
119			status = "okay";
120			nr-ports = <2>;
121		};
122
123	};
124	gpio-leds {
125		compatible = "gpio-leds";
126		pinctrl-0 = < &pmx_led_backup &pmx_led_power
127			      &pmx_led_rebuild &pmx_led_health >;
128		pinctrl-names = "default";
129
130		power_led {
131			label = "status:white:power_led";
132			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
133			default-state = "keep";
134		};
135		rebuild_led {
136			label = "status:white:rebuild_led";
137			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
138		};
139		health_led {
140			label = "status:red:health_led";
141			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
142		};
143		backup_led {
144			label = "status:blue:backup_led";
145			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
146		};
147	};
148	gpio-keys {
149		compatible = "gpio-keys";
150		#address-cells = <1>;
151		#size-cells = <0>;
152		pinctrl-0 = <&pmx_button_reset &pmx_button_power
153			     &pmx_button_otb>;
154		pinctrl-names = "default";
155
156
157		Power {
158			label = "Power Button";
159			linux,code = <KEY_POWER>;
160			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
161		};
162		Reset {
163			label = "Reset Button";
164			linux,code = <KEY_RESTART>;
165			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
166		};
167		OTB {
168			label = "OTB Button";
169			linux,code = <KEY_COPY>;
170			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
171		};
172	};
173	gpio-poweroff {
174		compatible = "gpio-poweroff";
175		gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
176	};
177};
178
179&nand {
180	status = "okay";
181
182	partition@0 {
183		label = "u-boot";
184		reg = <0x0000000 0x100000>;
185		read-only;
186	};
187
188	partition@a0000 {
189		label = "env";
190		reg = <0xa0000 0x20000>;
191		read-only;
192	};
193
194	partition@100000 {
195		label = "uImage";
196		reg = <0x100000 0x300000>;
197	};
198
199	partition@400000 {
200		label = "rootfs";
201		reg = <0x400000 0x1C00000>;
202	};
203};
204
205&mdio {
206	status = "okay";
207
208	ethphy1: ethernet-phy@11 {
209		reg = <11>;
210	};
211};
212
213&eth0 {
214	status = "okay";
215	ethernet0-port@0 {
216		speed = <1000>;
217		duplex = <1>;
218	};
219};
220
221&eth1 {
222	status = "okay";
223	ethernet1-port@0 {
224		phy-handle = <&ethphy1>;
225	};
226};
227