1// SPDX-License-Identifier: GPL-2.0+
2// Copyright (c) 2018 Inventec Corporation
3/dts-v1/;
4
5#include "aspeed-g5.dtsi"
6#include <dt-bindings/gpio/aspeed-gpio.h>
7
8/ {
9	model = "Lanyang BMC";
10	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
11
12	chosen {
13		stdout-path = &uart5;
14		bootargs = "console=ttyS4,115200 earlycon";
15	};
16
17	memory@80000000 {
18		reg = <0x80000000 0x40000000>;
19	};
20
21	reserved-memory {
22		#address-cells = <1>;
23		#size-cells = <1>;
24		ranges;
25
26		flash_memory: region@98000000 {
27			no-map;
28			reg = <0x98000000 0x04000000>; /* 64M */
29		};
30	};
31
32	leds {
33		compatible = "gpio-leds";
34
35		sys_boot_status {
36			label = "System_boot_status";
37			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
38		};
39
40		attention {
41			label = "Attention_locator";
42			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
43		};
44
45		plt_fault {
46			label = "Platform_fault";
47			gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
48		};
49
50		hdd_fault {
51			label = "Onboard_drive_fault";
52			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
53		};
54		bmc_err {
55			lable = "BMC_fault";
56			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
57		};
58
59		sys_err {
60			lable = "Sys_fault";
61			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
62		};
63	};
64
65	fsi: gpio-fsi {
66		compatible = "fsi-master-gpio", "fsi-master";
67		#address-cells = <2>;
68		#size-cells = <0>;
69
70		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
71		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
72		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
73		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
74		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
75	};
76
77	iio-hwmon {
78		compatible = "iio-hwmon";
79		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
80			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
81			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
82			<&adc 13>, <&adc 14>, <&adc 15>;
83	};
84
85	iio-hwmon-battery {
86		compatible = "iio-hwmon";
87		io-channels = <&adc 12>;
88	};
89};
90
91&pwm_tacho {
92	status = "okay";
93	pinctrl-names = "default";
94	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
95		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
96
97	fan@0 {
98		reg = <0x00>;
99		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
100	};
101
102	fan@1 {
103		reg = <0x01>;
104		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
105	};
106
107	fan@2 {
108		reg = <0x02>;
109		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
110	};
111
112	fan@3 {
113		reg = <0x03>;
114		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
115	};
116};
117
118&fmc {
119	status = "okay";
120	flash@0 {
121		status = "okay";
122		m25p,fast-read;
123		label = "bmc";
124#include "openbmc-flash-layout.dtsi"
125	};
126};
127
128&spi1 {
129	status = "okay";
130	pinctrl-names = "default";
131	pinctrl-0 = <&pinctrl_spi1_default>;
132
133	flash@0 {
134		status = "okay";
135		label = "pnor";
136		m25p,fast-read;
137	};
138};
139
140&spi2 {
141	status = "okay";
142	pinctrl-names = "default";
143	pinctrl-0 = <&pinctrl_spi2ck_default
144		     &pinctrl_spi2cs0_default
145		     &pinctrl_spi2cs1_default
146		     &pinctrl_spi2miso_default
147		     &pinctrl_spi2mosi_default>;
148
149	flash@0 {
150		status = "okay";
151	};
152};
153
154&uart1 {
155	status = "okay";
156	pinctrl-names = "default";
157	pinctrl-0 = <&pinctrl_txd1_default
158		     &pinctrl_rxd1_default>;
159};
160
161&lpc_ctrl {
162	status = "okay";
163	memory-region = <&flash_memory>;
164	flash = <&spi1>;
165};
166
167&lpc_snoop {
168	status = "okay";
169	snoop-ports = <0x80>;
170};
171
172&uart5 {
173	status = "okay";
174};
175
176&mac0 {
177	status = "okay";
178
179	pinctrl-names = "default";
180	pinctrl-0 = <&pinctrl_rmii1_default>;
181	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
182		 <&syscon ASPEED_CLK_MAC1RCLK>;
183	clock-names = "MACCLK", "RCLK";
184	use-ncsi;
185};
186
187&mac1 {
188	status = "okay";
189
190	pinctrl-names = "default";
191	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
192};
193
194&i2c0 {
195	status = "okay";
196
197	eeprom@55 {
198		compatible = "atmel,24c64";
199		reg = <0x55>;
200		pagesize = <32>;
201	};
202
203	rtc@68 {
204		compatible = "nxp,pcf8523";
205		reg = <0x68>;
206	};
207
208	tmp75@48 {
209		compatible = "ti,tmp75";
210		reg = <0x48>;
211	};
212};
213
214&i2c1 {
215	status = "okay";
216};
217
218&i2c2 {
219	status = "okay";
220};
221
222&i2c3 {
223	status = "okay";
224};
225
226&i2c4 {
227	status = "okay";
228};
229
230&i2c5 {
231	status = "okay";
232};
233
234&i2c6 {
235	status = "okay";
236};
237
238&i2c7 {
239	status = "okay";
240};
241
242&i2c8 {
243	status = "okay";
244};
245
246&i2c9 {
247	status = "okay";
248};
249
250&i2c10 {
251	status = "okay";
252};
253
254&i2c11 {
255	status = "okay";
256};
257
258&vuart {
259	status = "okay";
260};
261
262&gfx {
263	status = "okay";
264};
265
266&pinctrl {
267	aspeed,external-nodes = <&gfx &lhc>;
268};
269
270&gpio {
271	pin_gpio_b0 {
272		gpio-hog;
273		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
274		output-high;
275		line-name = "BMC_HDD1_PWR_EN";
276	};
277
278	pin_gpio_b5 {
279		gpio-hog;
280		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
281		input;
282		line-name = "BMC_USB1_OCI2";
283	};
284
285	pin_gpio_h5 {
286		gpio-hog;
287		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
288		output-high;
289		line-name = "BMC_CP0_PERST_ENABLE_R";
290	};
291
292	pin_gpio_z2 {
293		gpio-hog;
294		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
295		output-high;
296		line-name = "RST_PCA9546_U177_N";
297	};
298
299	pin_gpio_aa6 {
300		gpio-hog;
301		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
302		output-high;
303		line-name = "BMC_CP0_RESET_N";
304	};
305
306	pin_gpio_aa7 {
307		gpio-hog;
308		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
309		output-high;
310		line-name = "BMC_TPM_RESET_N";
311	};
312
313	pin_gpio_ab0 {
314		gpio-hog;
315		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
316		output-high;
317		line-name = "BMC_USB_PWRON_N";
318	};
319};
320
321&ibt {
322	status = "okay";
323};
324
325&adc {
326	status = "okay";
327};
328
329#include "ibm-power9-dual.dtsi"
330