1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Milbeaut SoCs Clock Controller
8
9maintainers:
10  - Taichi Sugaya <sugaya.taichi@socionext.com>
11
12description: |
13  Milbeaut SoCs Clock controller is an integrated clock controller, which
14  generates and supplies to all modules.
15
16  This binding uses common clock bindings
17  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
18
19properties:
20  compatible:
21    enum:
22      - socionext,milbeaut-m10v-ccu
23
24  reg:
25    maxItems: 1
26
27  clocks:
28    maxItems: 1
29    description: external clock
30
31  '#clock-cells':
32    const: 1
33
34required:
35  - compatible
36  - reg
37  - clocks
38  - '#clock-cells'
39
40additionalProperties: false
41
42examples:
43  # Clock controller node:
44  - |
45    m10v-clk-ctrl@1d021000 {
46        compatible = "socionext,milbeaut-m10v-ccu";
47        reg = <0x1d021000 0x4000>;
48        #clock-cells = <1>;
49        clocks = <&clki40mhz>;
50    };
51
52  # Required an external clock for Clock controller node:
53  - |
54    clocks {
55        clki40mhz: clki40mhz {
56            compatible = "fixed-clock";
57            #clock-cells = <0>;
58            clock-frequency = <40000000>;
59        };
60        /* other clocks */
61    };
62
63  # The clock consumer shall specify the desired clock-output of the clock
64  # controller as below by specifying output-id in its "clk" phandle cell.
65  # 2: uart
66  # 4: 32-bit timer
67  # 7: UHS-I/II
68  - |
69    serial@1e700010 {
70        compatible = "socionext,milbeaut-usio-uart";
71        reg = <0x1e700010 0x10>;
72        interrupts = <0 141 0x4>, <0 149 0x4>;
73        interrupt-names = "rx", "tx";
74        clocks = <&clk 2>;
75    };
76
77...
78