1
2* Marvell MBus
3
4Required properties:
5
6- compatible:	 Should be set to one of the following:
7		 marvell,armada370-mbus
8		 marvell,armadaxp-mbus
9		 marvell,armada375-mbus
10		 marvell,armada380-mbus
11		 marvell,kirkwood-mbus
12		 marvell,dove-mbus
13		 marvell,orion5x-88f5281-mbus
14		 marvell,orion5x-88f5182-mbus
15		 marvell,orion5x-88f5181-mbus
16		 marvell,orion5x-88f6183-mbus
17		 marvell,mv78xx0-mbus
18
19- address-cells: Must be '2'. The first cell for the MBus ID encoding,
20                 the second cell for the address offset within the window.
21
22- size-cells:    Must be '1'.
23
24- ranges:        Must be set up to provide a proper translation for each child.
25	         See the examples below.
26
27- controller:    Contains a single phandle referring to the MBus controller
28                 node. This allows to specify the node that contains the
29		 registers that control the MBus, which is typically contained
30		 within the internal register window (see below).
31
32Optional properties:
33
34- pcie-mem-aperture:	This optional property contains the aperture for
35			the memory region of the PCIe driver.
36			If it's defined, it must encode the base address and
37			size for the address decoding windows allocated for
38			the PCIe memory region.
39
40- pcie-io-aperture:	Just as explained for the above property, this
41			optional property contains the aperture for the
42			I/O region of the PCIe driver.
43
44* Marvell MBus controller
45
46Required properties:
47
48- compatible:	Should be set to "marvell,mbus-controller".
49
50- reg:          Device's register space.
51		Two or three entries are expected (see the examples below):
52		the first one controls the devices decoding window,
53		the second one controls the SDRAM decoding window and
54		the third controls the MBus bridge (only with the
55		marvell,armada370-mbus and marvell,armadaxp-mbus
56		compatible strings)
57
58Example:
59
60	soc {
61		compatible = "marvell,armada370-mbus", "simple-bus";
62		#address-cells = <2>;
63		#size-cells = <1>;
64		controller = <&mbusc>;
65		pcie-mem-aperture = <0xe0000000 0x8000000>;
66		pcie-io-aperture  = <0xe8000000 0x100000>;
67
68		internal-regs {
69			compatible = "simple-bus";
70
71			mbusc: mbus-controller@20000 {
72				compatible = "marvell,mbus-controller";
73				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
74			};
75
76			/* more children ...*/
77		};
78	};
79
80** MBus address decoding window specification
81
82The MBus children address space is comprised of two cells: the first one for
83the window ID and the second one for the offset within the window.
84In order to allow to describe valid and non-valid window entries, the
85following encoding is used:
86
87  0xSIAA0000 0x00oooooo
88
89Where:
90
91  S = 0x0 for a MBus valid window
92  S = 0xf for a non-valid window (see below)
93
94If S = 0x0, then:
95
96   I = 4-bit window target ID
97  AA = windpw attribute
98
99If S = 0xf, then:
100
101   I = don't care
102   AA = 1 for internal register
103
104Following the above encoding, for each ranges entry for a MBus valid window
105(S = 0x0), an address decoding window is allocated. On the other side,
106entries for translation that do not correspond to valid windows (S = 0xf)
107are skipped.
108
109	soc {
110		compatible = "marvell,armada370-mbus", "simple-bus";
111		#address-cells = <2>;
112		#size-cells = <1>;
113		controller = <&mbusc>;
114
115		ranges = <0xf0010000 0 0 0xd0000000 0x100000
116			  0x01e00000 0 0 0xfff00000 0x100000>;
117
118		bootrom {
119			compatible = "marvell,bootrom";
120			reg = <0x01e00000 0 0x100000>;
121		};
122
123		/* other children */
124		...
125
126		internal-regs {
127			compatible = "simple-bus";
128			ranges = <0 0xf0010000 0 0x100000>;
129
130			mbusc: mbus-controller@20000 {
131				compatible = "marvell,mbus-controller";
132				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
133			};
134
135			/* more children ...*/
136		};
137	};
138
139In the shown example, the translation entry in the 'ranges' property is what
140makes the MBus driver create a static decoding window for the corresponding
141given child device. Note that the binding does not require child nodes to be
142present. Of course, child nodes are needed to probe the devices.
143
144Since each window is identified by its target ID and attribute ID there's
145a special macro that can be use to simplify the translation entries:
146
147#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
148
149Using this macro, the above example would be:
150
151	soc {
152		compatible = "marvell,armada370-mbus", "simple-bus";
153		#address-cells = <2>;
154		#size-cells = <1>;
155		controller = <&mbusc>;
156
157		ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
158			   MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
159
160		bootrom {
161			compatible = "marvell,bootrom";
162			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
163		};
164
165		/* other children */
166		...
167
168		internal-regs {
169			compatible = "simple-bus";
170			#address-cells = <1>;
171			#size-cells = <1>;
172			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
173
174			mbusc: mbus-controller@20000 {
175				compatible = "marvell,mbus-controller";
176				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
177			};
178
179			/* other children */
180			...
181		};
182	};
183
184
185** About the window base address
186
187Remember the MBus controller allows a great deal of flexibility for choosing
188the decoding window base address. When planning the device tree layout it's
189possible to choose any address as the base address, provided of course there's
190a region large enough available, and with the required alignment.
191
192Yet in other words: there's nothing preventing us from setting a base address
193of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
194unused.
195
196** Window allocation policy
197
198The mbus-node ranges property defines a set of mbus windows that are expected
199to be set by the operating system and that are guaranteed to be free of overlaps
200with one another or with the system memory ranges.
201
202Each entry in the property refers to exactly one window. If the operating system
203chooses to use a different set of mbus windows, it must ensure that any address
204translations performed from downstream devices are adapted accordingly.
205
206The operating system may insert additional mbus windows that do not conflict
207with the ones listed in the ranges, e.g. for mapping PCIe devices.
208As a special case, the internal register window must be set up by the boot
209loader at the address listed in the ranges property, since access to that region
210is needed to set up the other windows.
211
212** Example
213
214See the example below, where a more complete device tree is shown:
215
216	soc {
217		compatible = "marvell,armadaxp-mbus", "simple-bus";
218		controller = <&mbusc>;
219
220		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000   /* internal-regs */
221			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
222			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
223
224		bootrom {
225			compatible = "marvell,bootrom";
226			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
227		};
228
229		devbus-bootcs {
230			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
231
232			/* NOR */
233			nor {
234				compatible = "cfi-flash";
235				reg = <0 0x8000000>;
236				bank-width = <2>;
237			};
238		};
239
240		pcie-controller {
241			compatible = "marvell,armada-xp-pcie";
242			device_type = "pci";
243
244			#address-cells = <3>;
245			#size-cells = <2>;
246
247			ranges =
248			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
249				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
250				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
251				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
252				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
253				0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
254				0x81000800 0 0          MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
255
256
257			pcie@1,0 {
258				/* Port 0, Lane 0 */
259			};
260		};
261
262		internal-regs {
263			compatible = "simple-bus";
264			#address-cells = <1>;
265			#size-cells = <1>;
266			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
267
268			mbusc: mbus-controller@20000 {
269				reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
270			};
271
272			interrupt-controller@20000 {
273			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
274			};
275		};
276	};
277