1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * QLogic Fibre Channel HBA Driver
4 * Copyright (c) 2003-2014 QLogic Corporation
5 */
6 #include "qla_def.h"
7
8 #include <linux/delay.h>
9 #include <linux/slab.h>
10 #include <linux/vmalloc.h>
11 #include <linux/uaccess.h>
12
13 /*
14 * NVRAM support routines
15 */
16
17 /**
18 * qla2x00_lock_nvram_access() -
19 * @ha: HA context
20 */
21 static void
qla2x00_lock_nvram_access(struct qla_hw_data * ha)22 qla2x00_lock_nvram_access(struct qla_hw_data *ha)
23 {
24 uint16_t data;
25 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
26
27 if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
28 data = rd_reg_word(®->nvram);
29 while (data & NVR_BUSY) {
30 udelay(100);
31 data = rd_reg_word(®->nvram);
32 }
33
34 /* Lock resource */
35 wrt_reg_word(®->u.isp2300.host_semaphore, 0x1);
36 rd_reg_word(®->u.isp2300.host_semaphore);
37 udelay(5);
38 data = rd_reg_word(®->u.isp2300.host_semaphore);
39 while ((data & BIT_0) == 0) {
40 /* Lock failed */
41 udelay(100);
42 wrt_reg_word(®->u.isp2300.host_semaphore, 0x1);
43 rd_reg_word(®->u.isp2300.host_semaphore);
44 udelay(5);
45 data = rd_reg_word(®->u.isp2300.host_semaphore);
46 }
47 }
48 }
49
50 /**
51 * qla2x00_unlock_nvram_access() -
52 * @ha: HA context
53 */
54 static void
qla2x00_unlock_nvram_access(struct qla_hw_data * ha)55 qla2x00_unlock_nvram_access(struct qla_hw_data *ha)
56 {
57 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
58
59 if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha)) {
60 wrt_reg_word(®->u.isp2300.host_semaphore, 0);
61 rd_reg_word(®->u.isp2300.host_semaphore);
62 }
63 }
64
65 /**
66 * qla2x00_nv_write() - Prepare for NVRAM read/write operation.
67 * @ha: HA context
68 * @data: Serial interface selector
69 */
70 static void
qla2x00_nv_write(struct qla_hw_data * ha,uint16_t data)71 qla2x00_nv_write(struct qla_hw_data *ha, uint16_t data)
72 {
73 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
74
75 wrt_reg_word(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
76 rd_reg_word(®->nvram); /* PCI Posting. */
77 NVRAM_DELAY();
78 wrt_reg_word(®->nvram, data | NVR_SELECT | NVR_CLOCK |
79 NVR_WRT_ENABLE);
80 rd_reg_word(®->nvram); /* PCI Posting. */
81 NVRAM_DELAY();
82 wrt_reg_word(®->nvram, data | NVR_SELECT | NVR_WRT_ENABLE);
83 rd_reg_word(®->nvram); /* PCI Posting. */
84 NVRAM_DELAY();
85 }
86
87 /**
88 * qla2x00_nvram_request() - Sends read command to NVRAM and gets data from
89 * NVRAM.
90 * @ha: HA context
91 * @nv_cmd: NVRAM command
92 *
93 * Bit definitions for NVRAM command:
94 *
95 * Bit 26 = start bit
96 * Bit 25, 24 = opcode
97 * Bit 23-16 = address
98 * Bit 15-0 = write data
99 *
100 * Returns the word read from nvram @addr.
101 */
102 static uint16_t
qla2x00_nvram_request(struct qla_hw_data * ha,uint32_t nv_cmd)103 qla2x00_nvram_request(struct qla_hw_data *ha, uint32_t nv_cmd)
104 {
105 uint8_t cnt;
106 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
107 uint16_t data = 0;
108 uint16_t reg_data;
109
110 /* Send command to NVRAM. */
111 nv_cmd <<= 5;
112 for (cnt = 0; cnt < 11; cnt++) {
113 if (nv_cmd & BIT_31)
114 qla2x00_nv_write(ha, NVR_DATA_OUT);
115 else
116 qla2x00_nv_write(ha, 0);
117 nv_cmd <<= 1;
118 }
119
120 /* Read data from NVRAM. */
121 for (cnt = 0; cnt < 16; cnt++) {
122 wrt_reg_word(®->nvram, NVR_SELECT | NVR_CLOCK);
123 rd_reg_word(®->nvram); /* PCI Posting. */
124 NVRAM_DELAY();
125 data <<= 1;
126 reg_data = rd_reg_word(®->nvram);
127 if (reg_data & NVR_DATA_IN)
128 data |= BIT_0;
129 wrt_reg_word(®->nvram, NVR_SELECT);
130 rd_reg_word(®->nvram); /* PCI Posting. */
131 NVRAM_DELAY();
132 }
133
134 /* Deselect chip. */
135 wrt_reg_word(®->nvram, NVR_DESELECT);
136 rd_reg_word(®->nvram); /* PCI Posting. */
137 NVRAM_DELAY();
138
139 return data;
140 }
141
142
143 /**
144 * qla2x00_get_nvram_word() - Calculates word position in NVRAM and calls the
145 * request routine to get the word from NVRAM.
146 * @ha: HA context
147 * @addr: Address in NVRAM to read
148 *
149 * Returns the word read from nvram @addr.
150 */
151 static uint16_t
qla2x00_get_nvram_word(struct qla_hw_data * ha,uint32_t addr)152 qla2x00_get_nvram_word(struct qla_hw_data *ha, uint32_t addr)
153 {
154 uint16_t data;
155 uint32_t nv_cmd;
156
157 nv_cmd = addr << 16;
158 nv_cmd |= NV_READ_OP;
159 data = qla2x00_nvram_request(ha, nv_cmd);
160
161 return (data);
162 }
163
164 /**
165 * qla2x00_nv_deselect() - Deselect NVRAM operations.
166 * @ha: HA context
167 */
168 static void
qla2x00_nv_deselect(struct qla_hw_data * ha)169 qla2x00_nv_deselect(struct qla_hw_data *ha)
170 {
171 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
172
173 wrt_reg_word(®->nvram, NVR_DESELECT);
174 rd_reg_word(®->nvram); /* PCI Posting. */
175 NVRAM_DELAY();
176 }
177
178 /**
179 * qla2x00_write_nvram_word() - Write NVRAM data.
180 * @ha: HA context
181 * @addr: Address in NVRAM to write
182 * @data: word to program
183 */
184 static void
qla2x00_write_nvram_word(struct qla_hw_data * ha,uint32_t addr,__le16 data)185 qla2x00_write_nvram_word(struct qla_hw_data *ha, uint32_t addr, __le16 data)
186 {
187 int count;
188 uint16_t word;
189 uint32_t nv_cmd, wait_cnt;
190 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
191 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
192
193 qla2x00_nv_write(ha, NVR_DATA_OUT);
194 qla2x00_nv_write(ha, 0);
195 qla2x00_nv_write(ha, 0);
196
197 for (word = 0; word < 8; word++)
198 qla2x00_nv_write(ha, NVR_DATA_OUT);
199
200 qla2x00_nv_deselect(ha);
201
202 /* Write data */
203 nv_cmd = (addr << 16) | NV_WRITE_OP;
204 nv_cmd |= (__force u16)data;
205 nv_cmd <<= 5;
206 for (count = 0; count < 27; count++) {
207 if (nv_cmd & BIT_31)
208 qla2x00_nv_write(ha, NVR_DATA_OUT);
209 else
210 qla2x00_nv_write(ha, 0);
211
212 nv_cmd <<= 1;
213 }
214
215 qla2x00_nv_deselect(ha);
216
217 /* Wait for NVRAM to become ready */
218 wrt_reg_word(®->nvram, NVR_SELECT);
219 rd_reg_word(®->nvram); /* PCI Posting. */
220 wait_cnt = NVR_WAIT_CNT;
221 do {
222 if (!--wait_cnt) {
223 ql_dbg(ql_dbg_user, vha, 0x708d,
224 "NVRAM didn't go ready...\n");
225 break;
226 }
227 NVRAM_DELAY();
228 word = rd_reg_word(®->nvram);
229 } while ((word & NVR_DATA_IN) == 0);
230
231 qla2x00_nv_deselect(ha);
232
233 /* Disable writes */
234 qla2x00_nv_write(ha, NVR_DATA_OUT);
235 for (count = 0; count < 10; count++)
236 qla2x00_nv_write(ha, 0);
237
238 qla2x00_nv_deselect(ha);
239 }
240
241 static int
qla2x00_write_nvram_word_tmo(struct qla_hw_data * ha,uint32_t addr,__le16 data,uint32_t tmo)242 qla2x00_write_nvram_word_tmo(struct qla_hw_data *ha, uint32_t addr,
243 __le16 data, uint32_t tmo)
244 {
245 int ret, count;
246 uint16_t word;
247 uint32_t nv_cmd;
248 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
249
250 ret = QLA_SUCCESS;
251
252 qla2x00_nv_write(ha, NVR_DATA_OUT);
253 qla2x00_nv_write(ha, 0);
254 qla2x00_nv_write(ha, 0);
255
256 for (word = 0; word < 8; word++)
257 qla2x00_nv_write(ha, NVR_DATA_OUT);
258
259 qla2x00_nv_deselect(ha);
260
261 /* Write data */
262 nv_cmd = (addr << 16) | NV_WRITE_OP;
263 nv_cmd |= (__force u16)data;
264 nv_cmd <<= 5;
265 for (count = 0; count < 27; count++) {
266 if (nv_cmd & BIT_31)
267 qla2x00_nv_write(ha, NVR_DATA_OUT);
268 else
269 qla2x00_nv_write(ha, 0);
270
271 nv_cmd <<= 1;
272 }
273
274 qla2x00_nv_deselect(ha);
275
276 /* Wait for NVRAM to become ready */
277 wrt_reg_word(®->nvram, NVR_SELECT);
278 rd_reg_word(®->nvram); /* PCI Posting. */
279 do {
280 NVRAM_DELAY();
281 word = rd_reg_word(®->nvram);
282 if (!--tmo) {
283 ret = QLA_FUNCTION_FAILED;
284 break;
285 }
286 } while ((word & NVR_DATA_IN) == 0);
287
288 qla2x00_nv_deselect(ha);
289
290 /* Disable writes */
291 qla2x00_nv_write(ha, NVR_DATA_OUT);
292 for (count = 0; count < 10; count++)
293 qla2x00_nv_write(ha, 0);
294
295 qla2x00_nv_deselect(ha);
296
297 return ret;
298 }
299
300 /**
301 * qla2x00_clear_nvram_protection() -
302 * @ha: HA context
303 */
304 static int
qla2x00_clear_nvram_protection(struct qla_hw_data * ha)305 qla2x00_clear_nvram_protection(struct qla_hw_data *ha)
306 {
307 int ret, stat;
308 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
309 uint32_t word, wait_cnt;
310 __le16 wprot, wprot_old;
311 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
312
313 /* Clear NVRAM write protection. */
314 ret = QLA_FUNCTION_FAILED;
315
316 wprot_old = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
317 stat = qla2x00_write_nvram_word_tmo(ha, ha->nvram_base,
318 cpu_to_le16(0x1234), 100000);
319 wprot = cpu_to_le16(qla2x00_get_nvram_word(ha, ha->nvram_base));
320 if (stat != QLA_SUCCESS || wprot != cpu_to_le16(0x1234)) {
321 /* Write enable. */
322 qla2x00_nv_write(ha, NVR_DATA_OUT);
323 qla2x00_nv_write(ha, 0);
324 qla2x00_nv_write(ha, 0);
325 for (word = 0; word < 8; word++)
326 qla2x00_nv_write(ha, NVR_DATA_OUT);
327
328 qla2x00_nv_deselect(ha);
329
330 /* Enable protection register. */
331 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
332 qla2x00_nv_write(ha, NVR_PR_ENABLE);
333 qla2x00_nv_write(ha, NVR_PR_ENABLE);
334 for (word = 0; word < 8; word++)
335 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
336
337 qla2x00_nv_deselect(ha);
338
339 /* Clear protection register (ffff is cleared). */
340 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
341 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
342 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
343 for (word = 0; word < 8; word++)
344 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
345
346 qla2x00_nv_deselect(ha);
347
348 /* Wait for NVRAM to become ready. */
349 wrt_reg_word(®->nvram, NVR_SELECT);
350 rd_reg_word(®->nvram); /* PCI Posting. */
351 wait_cnt = NVR_WAIT_CNT;
352 do {
353 if (!--wait_cnt) {
354 ql_dbg(ql_dbg_user, vha, 0x708e,
355 "NVRAM didn't go ready...\n");
356 break;
357 }
358 NVRAM_DELAY();
359 word = rd_reg_word(®->nvram);
360 } while ((word & NVR_DATA_IN) == 0);
361
362 if (wait_cnt)
363 ret = QLA_SUCCESS;
364 } else
365 qla2x00_write_nvram_word(ha, ha->nvram_base, wprot_old);
366
367 return ret;
368 }
369
370 static void
qla2x00_set_nvram_protection(struct qla_hw_data * ha,int stat)371 qla2x00_set_nvram_protection(struct qla_hw_data *ha, int stat)
372 {
373 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
374 uint32_t word, wait_cnt;
375 scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
376
377 if (stat != QLA_SUCCESS)
378 return;
379
380 /* Set NVRAM write protection. */
381 /* Write enable. */
382 qla2x00_nv_write(ha, NVR_DATA_OUT);
383 qla2x00_nv_write(ha, 0);
384 qla2x00_nv_write(ha, 0);
385 for (word = 0; word < 8; word++)
386 qla2x00_nv_write(ha, NVR_DATA_OUT);
387
388 qla2x00_nv_deselect(ha);
389
390 /* Enable protection register. */
391 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
392 qla2x00_nv_write(ha, NVR_PR_ENABLE);
393 qla2x00_nv_write(ha, NVR_PR_ENABLE);
394 for (word = 0; word < 8; word++)
395 qla2x00_nv_write(ha, NVR_DATA_OUT | NVR_PR_ENABLE);
396
397 qla2x00_nv_deselect(ha);
398
399 /* Enable protection register. */
400 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
401 qla2x00_nv_write(ha, NVR_PR_ENABLE);
402 qla2x00_nv_write(ha, NVR_PR_ENABLE | NVR_DATA_OUT);
403 for (word = 0; word < 8; word++)
404 qla2x00_nv_write(ha, NVR_PR_ENABLE);
405
406 qla2x00_nv_deselect(ha);
407
408 /* Wait for NVRAM to become ready. */
409 wrt_reg_word(®->nvram, NVR_SELECT);
410 rd_reg_word(®->nvram); /* PCI Posting. */
411 wait_cnt = NVR_WAIT_CNT;
412 do {
413 if (!--wait_cnt) {
414 ql_dbg(ql_dbg_user, vha, 0x708f,
415 "NVRAM didn't go ready...\n");
416 break;
417 }
418 NVRAM_DELAY();
419 word = rd_reg_word(®->nvram);
420 } while ((word & NVR_DATA_IN) == 0);
421 }
422
423
424 /*****************************************************************************/
425 /* Flash Manipulation Routines */
426 /*****************************************************************************/
427
428 static inline uint32_t
flash_conf_addr(struct qla_hw_data * ha,uint32_t faddr)429 flash_conf_addr(struct qla_hw_data *ha, uint32_t faddr)
430 {
431 return ha->flash_conf_off + faddr;
432 }
433
434 static inline uint32_t
flash_data_addr(struct qla_hw_data * ha,uint32_t faddr)435 flash_data_addr(struct qla_hw_data *ha, uint32_t faddr)
436 {
437 return ha->flash_data_off + faddr;
438 }
439
440 static inline uint32_t
nvram_conf_addr(struct qla_hw_data * ha,uint32_t naddr)441 nvram_conf_addr(struct qla_hw_data *ha, uint32_t naddr)
442 {
443 return ha->nvram_conf_off + naddr;
444 }
445
446 static inline uint32_t
nvram_data_addr(struct qla_hw_data * ha,uint32_t naddr)447 nvram_data_addr(struct qla_hw_data *ha, uint32_t naddr)
448 {
449 return ha->nvram_data_off + naddr;
450 }
451
452 static int
qla24xx_read_flash_dword(struct qla_hw_data * ha,uint32_t addr,uint32_t * data)453 qla24xx_read_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t *data)
454 {
455 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
456 ulong cnt = 30000;
457
458 wrt_reg_dword(®->flash_addr, addr & ~FARX_DATA_FLAG);
459
460 while (cnt--) {
461 if (rd_reg_dword(®->flash_addr) & FARX_DATA_FLAG) {
462 *data = rd_reg_dword(®->flash_data);
463 return QLA_SUCCESS;
464 }
465 udelay(10);
466 cond_resched();
467 }
468
469 ql_log(ql_log_warn, pci_get_drvdata(ha->pdev), 0x7090,
470 "Flash read dword at %x timeout.\n", addr);
471 *data = 0xDEADDEAD;
472 return QLA_FUNCTION_TIMEOUT;
473 }
474
475 int
qla24xx_read_flash_data(scsi_qla_host_t * vha,uint32_t * dwptr,uint32_t faddr,uint32_t dwords)476 qla24xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
477 uint32_t dwords)
478 {
479 ulong i;
480 int ret = QLA_SUCCESS;
481 struct qla_hw_data *ha = vha->hw;
482
483 /* Dword reads to flash. */
484 faddr = flash_data_addr(ha, faddr);
485 for (i = 0; i < dwords; i++, faddr++, dwptr++) {
486 ret = qla24xx_read_flash_dword(ha, faddr, dwptr);
487 if (ret != QLA_SUCCESS)
488 break;
489 cpu_to_le32s(dwptr);
490 }
491
492 return ret;
493 }
494
495 static int
qla24xx_write_flash_dword(struct qla_hw_data * ha,uint32_t addr,uint32_t data)496 qla24xx_write_flash_dword(struct qla_hw_data *ha, uint32_t addr, uint32_t data)
497 {
498 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
499 ulong cnt = 500000;
500
501 wrt_reg_dword(®->flash_data, data);
502 wrt_reg_dword(®->flash_addr, addr | FARX_DATA_FLAG);
503
504 while (cnt--) {
505 if (!(rd_reg_dword(®->flash_addr) & FARX_DATA_FLAG))
506 return QLA_SUCCESS;
507 udelay(10);
508 cond_resched();
509 }
510
511 ql_log(ql_log_warn, pci_get_drvdata(ha->pdev), 0x7090,
512 "Flash write dword at %x timeout.\n", addr);
513 return QLA_FUNCTION_TIMEOUT;
514 }
515
516 static void
qla24xx_get_flash_manufacturer(struct qla_hw_data * ha,uint8_t * man_id,uint8_t * flash_id)517 qla24xx_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
518 uint8_t *flash_id)
519 {
520 uint32_t faddr, ids = 0;
521
522 *man_id = *flash_id = 0;
523
524 faddr = flash_conf_addr(ha, 0x03ab);
525 if (!qla24xx_read_flash_dword(ha, faddr, &ids)) {
526 *man_id = LSB(ids);
527 *flash_id = MSB(ids);
528 }
529
530 /* Check if man_id and flash_id are valid. */
531 if (ids != 0xDEADDEAD && (*man_id == 0 || *flash_id == 0)) {
532 /* Read information using 0x9f opcode
533 * Device ID, Mfg ID would be read in the format:
534 * <Ext Dev Info><Device ID Part2><Device ID Part 1><Mfg ID>
535 * Example: ATMEL 0x00 01 45 1F
536 * Extract MFG and Dev ID from last two bytes.
537 */
538 faddr = flash_conf_addr(ha, 0x009f);
539 if (!qla24xx_read_flash_dword(ha, faddr, &ids)) {
540 *man_id = LSB(ids);
541 *flash_id = MSB(ids);
542 }
543 }
544 }
545
546 static int
qla2xxx_find_flt_start(scsi_qla_host_t * vha,uint32_t * start)547 qla2xxx_find_flt_start(scsi_qla_host_t *vha, uint32_t *start)
548 {
549 const char *loc, *locations[] = { "DEF", "PCI" };
550 uint32_t pcihdr, pcids;
551 uint16_t cnt, chksum;
552 __le16 *wptr;
553 struct qla_hw_data *ha = vha->hw;
554 struct req_que *req = ha->req_q_map[0];
555 struct qla_flt_location *fltl = (void *)req->ring;
556 uint32_t *dcode = (uint32_t *)req->ring;
557 uint8_t *buf = (void *)req->ring, *bcode, last_image;
558
559 /*
560 * FLT-location structure resides after the last PCI region.
561 */
562
563 /* Begin with sane defaults. */
564 loc = locations[0];
565 *start = 0;
566 if (IS_QLA24XX_TYPE(ha))
567 *start = FA_FLASH_LAYOUT_ADDR_24;
568 else if (IS_QLA25XX(ha))
569 *start = FA_FLASH_LAYOUT_ADDR;
570 else if (IS_QLA81XX(ha))
571 *start = FA_FLASH_LAYOUT_ADDR_81;
572 else if (IS_P3P_TYPE(ha)) {
573 *start = FA_FLASH_LAYOUT_ADDR_82;
574 goto end;
575 } else if (IS_QLA83XX(ha) || IS_QLA27XX(ha)) {
576 *start = FA_FLASH_LAYOUT_ADDR_83;
577 goto end;
578 } else if (IS_QLA28XX(ha)) {
579 *start = FA_FLASH_LAYOUT_ADDR_28;
580 goto end;
581 }
582
583 /* Begin with first PCI expansion ROM header. */
584 pcihdr = 0;
585 do {
586 /* Verify PCI expansion ROM header. */
587 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
588 bcode = buf + (pcihdr % 4);
589 if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa)
590 goto end;
591
592 /* Locate PCI data structure. */
593 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
594 qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
595 bcode = buf + (pcihdr % 4);
596
597 /* Validate signature of PCI data structure. */
598 if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
599 bcode[0x2] != 'I' || bcode[0x3] != 'R')
600 goto end;
601
602 last_image = bcode[0x15] & BIT_7;
603
604 /* Locate next PCI expansion ROM. */
605 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
606 } while (!last_image);
607
608 /* Now verify FLT-location structure. */
609 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, sizeof(*fltl) >> 2);
610 if (memcmp(fltl->sig, "QFLT", 4))
611 goto end;
612
613 wptr = (__force __le16 *)req->ring;
614 cnt = sizeof(*fltl) / sizeof(*wptr);
615 for (chksum = 0; cnt--; wptr++)
616 chksum += le16_to_cpu(*wptr);
617 if (chksum) {
618 ql_log(ql_log_fatal, vha, 0x0045,
619 "Inconsistent FLTL detected: checksum=0x%x.\n", chksum);
620 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010e,
621 fltl, sizeof(*fltl));
622 return QLA_FUNCTION_FAILED;
623 }
624
625 /* Good data. Use specified location. */
626 loc = locations[1];
627 *start = (le16_to_cpu(fltl->start_hi) << 16 |
628 le16_to_cpu(fltl->start_lo)) >> 2;
629 end:
630 ql_dbg(ql_dbg_init, vha, 0x0046,
631 "FLTL[%s] = 0x%x.\n",
632 loc, *start);
633 return QLA_SUCCESS;
634 }
635
636 static void
qla2xxx_get_flt_info(scsi_qla_host_t * vha,uint32_t flt_addr)637 qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
638 {
639 const char *locations[] = { "DEF", "FLT" }, *loc = locations[1];
640 const uint32_t def_fw[] =
641 { FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR, FA_RISC_CODE_ADDR_81 };
642 const uint32_t def_boot[] =
643 { FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR, FA_BOOT_CODE_ADDR_81 };
644 const uint32_t def_vpd_nvram[] =
645 { FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR, FA_VPD_NVRAM_ADDR_81 };
646 const uint32_t def_vpd0[] =
647 { 0, 0, FA_VPD0_ADDR_81 };
648 const uint32_t def_vpd1[] =
649 { 0, 0, FA_VPD1_ADDR_81 };
650 const uint32_t def_nvram0[] =
651 { 0, 0, FA_NVRAM0_ADDR_81 };
652 const uint32_t def_nvram1[] =
653 { 0, 0, FA_NVRAM1_ADDR_81 };
654 const uint32_t def_fdt[] =
655 { FA_FLASH_DESCR_ADDR_24, FA_FLASH_DESCR_ADDR,
656 FA_FLASH_DESCR_ADDR_81 };
657 const uint32_t def_npiv_conf0[] =
658 { FA_NPIV_CONF0_ADDR_24, FA_NPIV_CONF0_ADDR,
659 FA_NPIV_CONF0_ADDR_81 };
660 const uint32_t def_npiv_conf1[] =
661 { FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
662 FA_NPIV_CONF1_ADDR_81 };
663 const uint32_t fcp_prio_cfg0[] =
664 { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
665 0 };
666 const uint32_t fcp_prio_cfg1[] =
667 { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
668 0 };
669
670 struct qla_hw_data *ha = vha->hw;
671 uint32_t def = IS_QLA81XX(ha) ? 2 : IS_QLA25XX(ha) ? 1 : 0;
672 struct qla_flt_header *flt = ha->flt;
673 struct qla_flt_region *region = &flt->region[0];
674 __le16 *wptr;
675 uint16_t cnt, chksum;
676 uint32_t start;
677
678 /* Assign FCP prio region since older adapters may not have FLT, or
679 FCP prio region in it's FLT.
680 */
681 ha->flt_region_fcp_prio = (ha->port_no == 0) ?
682 fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
683
684 ha->flt_region_flt = flt_addr;
685 wptr = (__force __le16 *)ha->flt;
686 ha->isp_ops->read_optrom(vha, flt, flt_addr << 2,
687 (sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE));
688
689 if (le16_to_cpu(*wptr) == 0xffff)
690 goto no_flash_data;
691 if (flt->version != cpu_to_le16(1)) {
692 ql_log(ql_log_warn, vha, 0x0047,
693 "Unsupported FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
694 le16_to_cpu(flt->version), le16_to_cpu(flt->length),
695 le16_to_cpu(flt->checksum));
696 goto no_flash_data;
697 }
698
699 cnt = (sizeof(*flt) + le16_to_cpu(flt->length)) / sizeof(*wptr);
700 for (chksum = 0; cnt--; wptr++)
701 chksum += le16_to_cpu(*wptr);
702 if (chksum) {
703 ql_log(ql_log_fatal, vha, 0x0048,
704 "Inconsistent FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
705 le16_to_cpu(flt->version), le16_to_cpu(flt->length),
706 le16_to_cpu(flt->checksum));
707 goto no_flash_data;
708 }
709
710 cnt = le16_to_cpu(flt->length) / sizeof(*region);
711 for ( ; cnt; cnt--, region++) {
712 /* Store addresses as DWORD offsets. */
713 start = le32_to_cpu(region->start) >> 2;
714 ql_dbg(ql_dbg_init, vha, 0x0049,
715 "FLT[%#x]: start=%#x end=%#x size=%#x.\n",
716 le16_to_cpu(region->code), start,
717 le32_to_cpu(region->end) >> 2,
718 le32_to_cpu(region->size) >> 2);
719 if (region->attribute)
720 ql_log(ql_dbg_init, vha, 0xffff,
721 "Region %x is secure\n", region->code);
722
723 switch (le16_to_cpu(region->code)) {
724 case FLT_REG_FCOE_FW:
725 if (!IS_QLA8031(ha))
726 break;
727 ha->flt_region_fw = start;
728 break;
729 case FLT_REG_FW:
730 if (IS_QLA8031(ha))
731 break;
732 ha->flt_region_fw = start;
733 break;
734 case FLT_REG_BOOT_CODE:
735 ha->flt_region_boot = start;
736 break;
737 case FLT_REG_VPD_0:
738 if (IS_QLA8031(ha))
739 break;
740 ha->flt_region_vpd_nvram = start;
741 if (IS_P3P_TYPE(ha))
742 break;
743 if (ha->port_no == 0)
744 ha->flt_region_vpd = start;
745 break;
746 case FLT_REG_VPD_1:
747 if (IS_P3P_TYPE(ha) || IS_QLA8031(ha))
748 break;
749 if (ha->port_no == 1)
750 ha->flt_region_vpd = start;
751 break;
752 case FLT_REG_VPD_2:
753 if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
754 break;
755 if (ha->port_no == 2)
756 ha->flt_region_vpd = start;
757 break;
758 case FLT_REG_VPD_3:
759 if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
760 break;
761 if (ha->port_no == 3)
762 ha->flt_region_vpd = start;
763 break;
764 case FLT_REG_NVRAM_0:
765 if (IS_QLA8031(ha))
766 break;
767 if (ha->port_no == 0)
768 ha->flt_region_nvram = start;
769 break;
770 case FLT_REG_NVRAM_1:
771 if (IS_QLA8031(ha))
772 break;
773 if (ha->port_no == 1)
774 ha->flt_region_nvram = start;
775 break;
776 case FLT_REG_NVRAM_2:
777 if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
778 break;
779 if (ha->port_no == 2)
780 ha->flt_region_nvram = start;
781 break;
782 case FLT_REG_NVRAM_3:
783 if (!IS_QLA27XX(ha) && !IS_QLA28XX(ha))
784 break;
785 if (ha->port_no == 3)
786 ha->flt_region_nvram = start;
787 break;
788 case FLT_REG_FDT:
789 ha->flt_region_fdt = start;
790 break;
791 case FLT_REG_NPIV_CONF_0:
792 if (ha->port_no == 0)
793 ha->flt_region_npiv_conf = start;
794 break;
795 case FLT_REG_NPIV_CONF_1:
796 if (ha->port_no == 1)
797 ha->flt_region_npiv_conf = start;
798 break;
799 case FLT_REG_GOLD_FW:
800 ha->flt_region_gold_fw = start;
801 break;
802 case FLT_REG_FCP_PRIO_0:
803 if (ha->port_no == 0)
804 ha->flt_region_fcp_prio = start;
805 break;
806 case FLT_REG_FCP_PRIO_1:
807 if (ha->port_no == 1)
808 ha->flt_region_fcp_prio = start;
809 break;
810 case FLT_REG_BOOT_CODE_82XX:
811 ha->flt_region_boot = start;
812 break;
813 case FLT_REG_BOOT_CODE_8044:
814 if (IS_QLA8044(ha))
815 ha->flt_region_boot = start;
816 break;
817 case FLT_REG_FW_82XX:
818 ha->flt_region_fw = start;
819 break;
820 case FLT_REG_CNA_FW:
821 if (IS_CNA_CAPABLE(ha))
822 ha->flt_region_fw = start;
823 break;
824 case FLT_REG_GOLD_FW_82XX:
825 ha->flt_region_gold_fw = start;
826 break;
827 case FLT_REG_BOOTLOAD_82XX:
828 ha->flt_region_bootload = start;
829 break;
830 case FLT_REG_VPD_8XXX:
831 if (IS_CNA_CAPABLE(ha))
832 ha->flt_region_vpd = start;
833 break;
834 case FLT_REG_FCOE_NVRAM_0:
835 if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
836 break;
837 if (ha->port_no == 0)
838 ha->flt_region_nvram = start;
839 break;
840 case FLT_REG_FCOE_NVRAM_1:
841 if (!(IS_QLA8031(ha) || IS_QLA8044(ha)))
842 break;
843 if (ha->port_no == 1)
844 ha->flt_region_nvram = start;
845 break;
846 case FLT_REG_IMG_PRI_27XX:
847 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
848 ha->flt_region_img_status_pri = start;
849 break;
850 case FLT_REG_IMG_SEC_27XX:
851 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
852 ha->flt_region_img_status_sec = start;
853 break;
854 case FLT_REG_FW_SEC_27XX:
855 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
856 ha->flt_region_fw_sec = start;
857 break;
858 case FLT_REG_BOOTLOAD_SEC_27XX:
859 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
860 ha->flt_region_boot_sec = start;
861 break;
862 case FLT_REG_AUX_IMG_PRI_28XX:
863 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
864 ha->flt_region_aux_img_status_pri = start;
865 break;
866 case FLT_REG_AUX_IMG_SEC_28XX:
867 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
868 ha->flt_region_aux_img_status_sec = start;
869 break;
870 case FLT_REG_NVRAM_SEC_28XX_0:
871 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
872 if (ha->port_no == 0)
873 ha->flt_region_nvram_sec = start;
874 break;
875 case FLT_REG_NVRAM_SEC_28XX_1:
876 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
877 if (ha->port_no == 1)
878 ha->flt_region_nvram_sec = start;
879 break;
880 case FLT_REG_NVRAM_SEC_28XX_2:
881 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
882 if (ha->port_no == 2)
883 ha->flt_region_nvram_sec = start;
884 break;
885 case FLT_REG_NVRAM_SEC_28XX_3:
886 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
887 if (ha->port_no == 3)
888 ha->flt_region_nvram_sec = start;
889 break;
890 case FLT_REG_VPD_SEC_27XX_0:
891 case FLT_REG_VPD_SEC_28XX_0:
892 if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
893 ha->flt_region_vpd_nvram_sec = start;
894 if (ha->port_no == 0)
895 ha->flt_region_vpd_sec = start;
896 }
897 break;
898 case FLT_REG_VPD_SEC_27XX_1:
899 case FLT_REG_VPD_SEC_28XX_1:
900 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
901 if (ha->port_no == 1)
902 ha->flt_region_vpd_sec = start;
903 break;
904 case FLT_REG_VPD_SEC_27XX_2:
905 case FLT_REG_VPD_SEC_28XX_2:
906 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
907 if (ha->port_no == 2)
908 ha->flt_region_vpd_sec = start;
909 break;
910 case FLT_REG_VPD_SEC_27XX_3:
911 case FLT_REG_VPD_SEC_28XX_3:
912 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
913 if (ha->port_no == 3)
914 ha->flt_region_vpd_sec = start;
915 break;
916 }
917 }
918 goto done;
919
920 no_flash_data:
921 /* Use hardcoded defaults. */
922 loc = locations[0];
923 ha->flt_region_fw = def_fw[def];
924 ha->flt_region_boot = def_boot[def];
925 ha->flt_region_vpd_nvram = def_vpd_nvram[def];
926 ha->flt_region_vpd = (ha->port_no == 0) ?
927 def_vpd0[def] : def_vpd1[def];
928 ha->flt_region_nvram = (ha->port_no == 0) ?
929 def_nvram0[def] : def_nvram1[def];
930 ha->flt_region_fdt = def_fdt[def];
931 ha->flt_region_npiv_conf = (ha->port_no == 0) ?
932 def_npiv_conf0[def] : def_npiv_conf1[def];
933 done:
934 ql_dbg(ql_dbg_init, vha, 0x004a,
935 "FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x nvram=0x%x "
936 "fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n",
937 loc, ha->flt_region_boot, ha->flt_region_fw,
938 ha->flt_region_vpd_nvram, ha->flt_region_vpd, ha->flt_region_nvram,
939 ha->flt_region_fdt, ha->flt_region_flt, ha->flt_region_npiv_conf,
940 ha->flt_region_fcp_prio);
941 }
942
943 static void
qla2xxx_get_fdt_info(scsi_qla_host_t * vha)944 qla2xxx_get_fdt_info(scsi_qla_host_t *vha)
945 {
946 #define FLASH_BLK_SIZE_4K 0x1000
947 #define FLASH_BLK_SIZE_32K 0x8000
948 #define FLASH_BLK_SIZE_64K 0x10000
949 const char *loc, *locations[] = { "MID", "FDT" };
950 struct qla_hw_data *ha = vha->hw;
951 struct req_que *req = ha->req_q_map[0];
952 uint16_t cnt, chksum;
953 __le16 *wptr = (__force __le16 *)req->ring;
954 struct qla_fdt_layout *fdt = (struct qla_fdt_layout *)req->ring;
955 uint8_t man_id, flash_id;
956 uint16_t mid = 0, fid = 0;
957
958 ha->isp_ops->read_optrom(vha, fdt, ha->flt_region_fdt << 2,
959 OPTROM_BURST_DWORDS);
960 if (le16_to_cpu(*wptr) == 0xffff)
961 goto no_flash_data;
962 if (memcmp(fdt->sig, "QLID", 4))
963 goto no_flash_data;
964
965 for (cnt = 0, chksum = 0; cnt < sizeof(*fdt) >> 1; cnt++, wptr++)
966 chksum += le16_to_cpu(*wptr);
967 if (chksum) {
968 ql_dbg(ql_dbg_init, vha, 0x004c,
969 "Inconsistent FDT detected:"
970 " checksum=0x%x id=%c version0x%x.\n", chksum,
971 fdt->sig[0], le16_to_cpu(fdt->version));
972 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0113,
973 fdt, sizeof(*fdt));
974 goto no_flash_data;
975 }
976
977 loc = locations[1];
978 mid = le16_to_cpu(fdt->man_id);
979 fid = le16_to_cpu(fdt->id);
980 ha->fdt_wrt_disable = fdt->wrt_disable_bits;
981 ha->fdt_wrt_enable = fdt->wrt_enable_bits;
982 ha->fdt_wrt_sts_reg_cmd = fdt->wrt_sts_reg_cmd;
983 if (IS_QLA8044(ha))
984 ha->fdt_erase_cmd = fdt->erase_cmd;
985 else
986 ha->fdt_erase_cmd =
987 flash_conf_addr(ha, 0x0300 | fdt->erase_cmd);
988 ha->fdt_block_size = le32_to_cpu(fdt->block_size);
989 if (fdt->unprotect_sec_cmd) {
990 ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0300 |
991 fdt->unprotect_sec_cmd);
992 ha->fdt_protect_sec_cmd = fdt->protect_sec_cmd ?
993 flash_conf_addr(ha, 0x0300 | fdt->protect_sec_cmd) :
994 flash_conf_addr(ha, 0x0336);
995 }
996 goto done;
997 no_flash_data:
998 loc = locations[0];
999 if (IS_P3P_TYPE(ha)) {
1000 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
1001 goto done;
1002 }
1003 qla24xx_get_flash_manufacturer(ha, &man_id, &flash_id);
1004 mid = man_id;
1005 fid = flash_id;
1006 ha->fdt_wrt_disable = 0x9c;
1007 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x03d8);
1008 switch (man_id) {
1009 case 0xbf: /* STT flash. */
1010 if (flash_id == 0x8e)
1011 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
1012 else
1013 ha->fdt_block_size = FLASH_BLK_SIZE_32K;
1014
1015 if (flash_id == 0x80)
1016 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0352);
1017 break;
1018 case 0x13: /* ST M25P80. */
1019 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
1020 break;
1021 case 0x1f: /* Atmel 26DF081A. */
1022 ha->fdt_block_size = FLASH_BLK_SIZE_4K;
1023 ha->fdt_erase_cmd = flash_conf_addr(ha, 0x0320);
1024 ha->fdt_unprotect_sec_cmd = flash_conf_addr(ha, 0x0339);
1025 ha->fdt_protect_sec_cmd = flash_conf_addr(ha, 0x0336);
1026 break;
1027 default:
1028 /* Default to 64 kb sector size. */
1029 ha->fdt_block_size = FLASH_BLK_SIZE_64K;
1030 break;
1031 }
1032 done:
1033 ql_dbg(ql_dbg_init, vha, 0x004d,
1034 "FDT[%s]: (0x%x/0x%x) erase=0x%x "
1035 "pr=%x wrtd=0x%x blk=0x%x.\n",
1036 loc, mid, fid,
1037 ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
1038 ha->fdt_wrt_disable, ha->fdt_block_size);
1039
1040 }
1041
1042 static void
qla2xxx_get_idc_param(scsi_qla_host_t * vha)1043 qla2xxx_get_idc_param(scsi_qla_host_t *vha)
1044 {
1045 #define QLA82XX_IDC_PARAM_ADDR 0x003e885c
1046 __le32 *wptr;
1047 struct qla_hw_data *ha = vha->hw;
1048 struct req_que *req = ha->req_q_map[0];
1049
1050 if (!(IS_P3P_TYPE(ha)))
1051 return;
1052
1053 wptr = (__force __le32 *)req->ring;
1054 ha->isp_ops->read_optrom(vha, req->ring, QLA82XX_IDC_PARAM_ADDR, 8);
1055
1056 if (*wptr == cpu_to_le32(0xffffffff)) {
1057 ha->fcoe_dev_init_timeout = QLA82XX_ROM_DEV_INIT_TIMEOUT;
1058 ha->fcoe_reset_timeout = QLA82XX_ROM_DRV_RESET_ACK_TIMEOUT;
1059 } else {
1060 ha->fcoe_dev_init_timeout = le32_to_cpu(*wptr);
1061 wptr++;
1062 ha->fcoe_reset_timeout = le32_to_cpu(*wptr);
1063 }
1064 ql_dbg(ql_dbg_init, vha, 0x004e,
1065 "fcoe_dev_init_timeout=%d "
1066 "fcoe_reset_timeout=%d.\n", ha->fcoe_dev_init_timeout,
1067 ha->fcoe_reset_timeout);
1068 return;
1069 }
1070
1071 int
qla2xxx_get_flash_info(scsi_qla_host_t * vha)1072 qla2xxx_get_flash_info(scsi_qla_host_t *vha)
1073 {
1074 int ret;
1075 uint32_t flt_addr;
1076 struct qla_hw_data *ha = vha->hw;
1077
1078 if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
1079 !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha) &&
1080 !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
1081 return QLA_SUCCESS;
1082
1083 ret = qla2xxx_find_flt_start(vha, &flt_addr);
1084 if (ret != QLA_SUCCESS)
1085 return ret;
1086
1087 qla2xxx_get_flt_info(vha, flt_addr);
1088 qla2xxx_get_fdt_info(vha);
1089 qla2xxx_get_idc_param(vha);
1090
1091 return QLA_SUCCESS;
1092 }
1093
1094 void
qla2xxx_flash_npiv_conf(scsi_qla_host_t * vha)1095 qla2xxx_flash_npiv_conf(scsi_qla_host_t *vha)
1096 {
1097 #define NPIV_CONFIG_SIZE (16*1024)
1098 void *data;
1099 __le16 *wptr;
1100 uint16_t cnt, chksum;
1101 int i;
1102 struct qla_npiv_header hdr;
1103 struct qla_npiv_entry *entry;
1104 struct qla_hw_data *ha = vha->hw;
1105
1106 if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) &&
1107 !IS_CNA_CAPABLE(ha) && !IS_QLA2031(ha))
1108 return;
1109
1110 if (ha->flags.nic_core_reset_hdlr_active)
1111 return;
1112
1113 if (IS_QLA8044(ha))
1114 return;
1115
1116 ha->isp_ops->read_optrom(vha, &hdr, ha->flt_region_npiv_conf << 2,
1117 sizeof(struct qla_npiv_header));
1118 if (hdr.version == cpu_to_le16(0xffff))
1119 return;
1120 if (hdr.version != cpu_to_le16(1)) {
1121 ql_dbg(ql_dbg_user, vha, 0x7090,
1122 "Unsupported NPIV-Config "
1123 "detected: version=0x%x entries=0x%x checksum=0x%x.\n",
1124 le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
1125 le16_to_cpu(hdr.checksum));
1126 return;
1127 }
1128
1129 data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL);
1130 if (!data) {
1131 ql_log(ql_log_warn, vha, 0x7091,
1132 "Unable to allocate memory for data.\n");
1133 return;
1134 }
1135
1136 ha->isp_ops->read_optrom(vha, data, ha->flt_region_npiv_conf << 2,
1137 NPIV_CONFIG_SIZE);
1138
1139 cnt = (sizeof(hdr) + le16_to_cpu(hdr.entries) * sizeof(*entry)) >> 1;
1140 for (wptr = data, chksum = 0; cnt--; wptr++)
1141 chksum += le16_to_cpu(*wptr);
1142 if (chksum) {
1143 ql_dbg(ql_dbg_user, vha, 0x7092,
1144 "Inconsistent NPIV-Config "
1145 "detected: version=0x%x entries=0x%x checksum=0x%x.\n",
1146 le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
1147 le16_to_cpu(hdr.checksum));
1148 goto done;
1149 }
1150
1151 entry = data + sizeof(struct qla_npiv_header);
1152 cnt = le16_to_cpu(hdr.entries);
1153 for (i = 0; cnt; cnt--, entry++, i++) {
1154 uint16_t flags;
1155 struct fc_vport_identifiers vid;
1156 struct fc_vport *vport;
1157
1158 memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
1159
1160 flags = le16_to_cpu(entry->flags);
1161 if (flags == 0xffff)
1162 continue;
1163 if ((flags & BIT_0) == 0)
1164 continue;
1165
1166 memset(&vid, 0, sizeof(vid));
1167 vid.roles = FC_PORT_ROLE_FCP_INITIATOR;
1168 vid.vport_type = FC_PORTTYPE_NPIV;
1169 vid.disable = false;
1170 vid.port_name = wwn_to_u64(entry->port_name);
1171 vid.node_name = wwn_to_u64(entry->node_name);
1172
1173 ql_dbg(ql_dbg_user, vha, 0x7093,
1174 "NPIV[%02x]: wwpn=%llx wwnn=%llx vf_id=%#x Q_qos=%#x F_qos=%#x.\n",
1175 cnt, vid.port_name, vid.node_name,
1176 le16_to_cpu(entry->vf_id),
1177 entry->q_qos, entry->f_qos);
1178
1179 if (i < QLA_PRECONFIG_VPORTS) {
1180 vport = fc_vport_create(vha->host, 0, &vid);
1181 if (!vport)
1182 ql_log(ql_log_warn, vha, 0x7094,
1183 "NPIV-Config Failed to create vport [%02x]: wwpn=%llx wwnn=%llx.\n",
1184 cnt, vid.port_name, vid.node_name);
1185 }
1186 }
1187 done:
1188 kfree(data);
1189 }
1190
1191 static int
qla24xx_unprotect_flash(scsi_qla_host_t * vha)1192 qla24xx_unprotect_flash(scsi_qla_host_t *vha)
1193 {
1194 struct qla_hw_data *ha = vha->hw;
1195 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1196
1197 if (ha->flags.fac_supported)
1198 return qla81xx_fac_do_write_enable(vha, 1);
1199
1200 /* Enable flash write. */
1201 wrt_reg_dword(®->ctrl_status,
1202 rd_reg_dword(®->ctrl_status) | CSRX_FLASH_ENABLE);
1203 rd_reg_dword(®->ctrl_status); /* PCI Posting. */
1204
1205 if (!ha->fdt_wrt_disable)
1206 goto done;
1207
1208 /* Disable flash write-protection, first clear SR protection bit */
1209 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
1210 /* Then write zero again to clear remaining SR bits.*/
1211 qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0);
1212 done:
1213 return QLA_SUCCESS;
1214 }
1215
1216 static int
qla24xx_protect_flash(scsi_qla_host_t * vha)1217 qla24xx_protect_flash(scsi_qla_host_t *vha)
1218 {
1219 struct qla_hw_data *ha = vha->hw;
1220 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1221 ulong cnt = 300;
1222 uint32_t faddr, dword;
1223
1224 if (ha->flags.fac_supported)
1225 return qla81xx_fac_do_write_enable(vha, 0);
1226
1227 if (!ha->fdt_wrt_disable)
1228 goto skip_wrt_protect;
1229
1230 /* Enable flash write-protection and wait for completion. */
1231 faddr = flash_conf_addr(ha, 0x101);
1232 qla24xx_write_flash_dword(ha, faddr, ha->fdt_wrt_disable);
1233 faddr = flash_conf_addr(ha, 0x5);
1234 while (cnt--) {
1235 if (!qla24xx_read_flash_dword(ha, faddr, &dword)) {
1236 if (!(dword & BIT_0))
1237 break;
1238 }
1239 udelay(10);
1240 }
1241
1242 skip_wrt_protect:
1243 /* Disable flash write. */
1244 wrt_reg_dword(®->ctrl_status,
1245 rd_reg_dword(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
1246
1247 return QLA_SUCCESS;
1248 }
1249
1250 static int
qla24xx_erase_sector(scsi_qla_host_t * vha,uint32_t fdata)1251 qla24xx_erase_sector(scsi_qla_host_t *vha, uint32_t fdata)
1252 {
1253 struct qla_hw_data *ha = vha->hw;
1254 uint32_t start, finish;
1255
1256 if (ha->flags.fac_supported) {
1257 start = fdata >> 2;
1258 finish = start + (ha->fdt_block_size >> 2) - 1;
1259 return qla81xx_fac_erase_sector(vha, flash_data_addr(ha,
1260 start), flash_data_addr(ha, finish));
1261 }
1262
1263 return qla24xx_write_flash_dword(ha, ha->fdt_erase_cmd,
1264 (fdata & 0xff00) | ((fdata << 16) & 0xff0000) |
1265 ((fdata >> 16) & 0xff));
1266 }
1267
1268 static int
qla24xx_write_flash_data(scsi_qla_host_t * vha,__le32 * dwptr,uint32_t faddr,uint32_t dwords)1269 qla24xx_write_flash_data(scsi_qla_host_t *vha, __le32 *dwptr, uint32_t faddr,
1270 uint32_t dwords)
1271 {
1272 int ret;
1273 ulong liter;
1274 ulong dburst = OPTROM_BURST_DWORDS; /* burst size in dwords */
1275 uint32_t sec_mask, rest_addr, fdata;
1276 dma_addr_t optrom_dma;
1277 void *optrom = NULL;
1278 struct qla_hw_data *ha = vha->hw;
1279
1280 if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha) && !IS_QLA83XX(ha) &&
1281 !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
1282 goto next;
1283
1284 /* Allocate dma buffer for burst write */
1285 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
1286 &optrom_dma, GFP_KERNEL);
1287 if (!optrom) {
1288 ql_log(ql_log_warn, vha, 0x7095,
1289 "Failed allocate burst (%x bytes)\n", OPTROM_BURST_SIZE);
1290 }
1291
1292 next:
1293 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
1294 "Unprotect flash...\n");
1295 ret = qla24xx_unprotect_flash(vha);
1296 if (ret) {
1297 ql_log(ql_log_warn, vha, 0x7096,
1298 "Failed to unprotect flash.\n");
1299 goto done;
1300 }
1301
1302 rest_addr = (ha->fdt_block_size >> 2) - 1;
1303 sec_mask = ~rest_addr;
1304 for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
1305 fdata = (faddr & sec_mask) << 2;
1306
1307 /* Are we at the beginning of a sector? */
1308 if (!(faddr & rest_addr)) {
1309 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
1310 "Erase sector %#x...\n", faddr);
1311
1312 ret = qla24xx_erase_sector(vha, fdata);
1313 if (ret) {
1314 ql_dbg(ql_dbg_user, vha, 0x7007,
1315 "Failed to erase sector %x.\n", faddr);
1316 break;
1317 }
1318 }
1319
1320 if (optrom) {
1321 /* If smaller than a burst remaining */
1322 if (dwords - liter < dburst)
1323 dburst = dwords - liter;
1324
1325 /* Copy to dma buffer */
1326 memcpy(optrom, dwptr, dburst << 2);
1327
1328 /* Burst write */
1329 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
1330 "Write burst (%#lx dwords)...\n", dburst);
1331 ret = qla2x00_load_ram(vha, optrom_dma,
1332 flash_data_addr(ha, faddr), dburst);
1333 if (!ret) {
1334 liter += dburst - 1;
1335 faddr += dburst - 1;
1336 dwptr += dburst - 1;
1337 continue;
1338 }
1339
1340 ql_log(ql_log_warn, vha, 0x7097,
1341 "Failed burst-write at %x (%p/%#llx)....\n",
1342 flash_data_addr(ha, faddr), optrom,
1343 (u64)optrom_dma);
1344
1345 dma_free_coherent(&ha->pdev->dev,
1346 OPTROM_BURST_SIZE, optrom, optrom_dma);
1347 optrom = NULL;
1348 if (IS_QLA27XX(ha) || IS_QLA28XX(ha))
1349 break;
1350 ql_log(ql_log_warn, vha, 0x7098,
1351 "Reverting to slow write...\n");
1352 }
1353
1354 /* Slow write */
1355 ret = qla24xx_write_flash_dword(ha,
1356 flash_data_addr(ha, faddr), le32_to_cpu(*dwptr));
1357 if (ret) {
1358 ql_dbg(ql_dbg_user, vha, 0x7006,
1359 "Failed slow write %x (%x)\n", faddr, *dwptr);
1360 break;
1361 }
1362 }
1363
1364 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
1365 "Protect flash...\n");
1366 ret = qla24xx_protect_flash(vha);
1367 if (ret)
1368 ql_log(ql_log_warn, vha, 0x7099,
1369 "Failed to protect flash\n");
1370 done:
1371 if (optrom)
1372 dma_free_coherent(&ha->pdev->dev,
1373 OPTROM_BURST_SIZE, optrom, optrom_dma);
1374
1375 return ret;
1376 }
1377
1378 uint8_t *
qla2x00_read_nvram_data(scsi_qla_host_t * vha,void * buf,uint32_t naddr,uint32_t bytes)1379 qla2x00_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
1380 uint32_t bytes)
1381 {
1382 uint32_t i;
1383 __le16 *wptr;
1384 struct qla_hw_data *ha = vha->hw;
1385
1386 /* Word reads to NVRAM via registers. */
1387 wptr = buf;
1388 qla2x00_lock_nvram_access(ha);
1389 for (i = 0; i < bytes >> 1; i++, naddr++)
1390 wptr[i] = cpu_to_le16(qla2x00_get_nvram_word(ha,
1391 naddr));
1392 qla2x00_unlock_nvram_access(ha);
1393
1394 return buf;
1395 }
1396
1397 uint8_t *
qla24xx_read_nvram_data(scsi_qla_host_t * vha,void * buf,uint32_t naddr,uint32_t bytes)1398 qla24xx_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
1399 uint32_t bytes)
1400 {
1401 struct qla_hw_data *ha = vha->hw;
1402 uint32_t *dwptr = buf;
1403 uint32_t i;
1404
1405 if (IS_P3P_TYPE(ha))
1406 return buf;
1407
1408 /* Dword reads to flash. */
1409 naddr = nvram_data_addr(ha, naddr);
1410 bytes >>= 2;
1411 for (i = 0; i < bytes; i++, naddr++, dwptr++) {
1412 if (qla24xx_read_flash_dword(ha, naddr, dwptr))
1413 break;
1414 cpu_to_le32s(dwptr);
1415 }
1416
1417 return buf;
1418 }
1419
1420 int
qla2x00_write_nvram_data(scsi_qla_host_t * vha,void * buf,uint32_t naddr,uint32_t bytes)1421 qla2x00_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
1422 uint32_t bytes)
1423 {
1424 int ret, stat;
1425 uint32_t i;
1426 uint16_t *wptr;
1427 unsigned long flags;
1428 struct qla_hw_data *ha = vha->hw;
1429
1430 ret = QLA_SUCCESS;
1431
1432 spin_lock_irqsave(&ha->hardware_lock, flags);
1433 qla2x00_lock_nvram_access(ha);
1434
1435 /* Disable NVRAM write-protection. */
1436 stat = qla2x00_clear_nvram_protection(ha);
1437
1438 wptr = (uint16_t *)buf;
1439 for (i = 0; i < bytes >> 1; i++, naddr++) {
1440 qla2x00_write_nvram_word(ha, naddr,
1441 cpu_to_le16(*wptr));
1442 wptr++;
1443 }
1444
1445 /* Enable NVRAM write-protection. */
1446 qla2x00_set_nvram_protection(ha, stat);
1447
1448 qla2x00_unlock_nvram_access(ha);
1449 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1450
1451 return ret;
1452 }
1453
1454 int
qla24xx_write_nvram_data(scsi_qla_host_t * vha,void * buf,uint32_t naddr,uint32_t bytes)1455 qla24xx_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
1456 uint32_t bytes)
1457 {
1458 struct qla_hw_data *ha = vha->hw;
1459 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1460 __le32 *dwptr = buf;
1461 uint32_t i;
1462 int ret;
1463
1464 ret = QLA_SUCCESS;
1465
1466 if (IS_P3P_TYPE(ha))
1467 return ret;
1468
1469 /* Enable flash write. */
1470 wrt_reg_dword(®->ctrl_status,
1471 rd_reg_dword(®->ctrl_status) | CSRX_FLASH_ENABLE);
1472 rd_reg_dword(®->ctrl_status); /* PCI Posting. */
1473
1474 /* Disable NVRAM write-protection. */
1475 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
1476 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0);
1477
1478 /* Dword writes to flash. */
1479 naddr = nvram_data_addr(ha, naddr);
1480 bytes >>= 2;
1481 for (i = 0; i < bytes; i++, naddr++, dwptr++) {
1482 if (qla24xx_write_flash_dword(ha, naddr, le32_to_cpu(*dwptr))) {
1483 ql_dbg(ql_dbg_user, vha, 0x709a,
1484 "Unable to program nvram address=%x data=%x.\n",
1485 naddr, *dwptr);
1486 break;
1487 }
1488 }
1489
1490 /* Enable NVRAM write-protection. */
1491 qla24xx_write_flash_dword(ha, nvram_conf_addr(ha, 0x101), 0x8c);
1492
1493 /* Disable flash write. */
1494 wrt_reg_dword(®->ctrl_status,
1495 rd_reg_dword(®->ctrl_status) & ~CSRX_FLASH_ENABLE);
1496 rd_reg_dword(®->ctrl_status); /* PCI Posting. */
1497
1498 return ret;
1499 }
1500
1501 uint8_t *
qla25xx_read_nvram_data(scsi_qla_host_t * vha,void * buf,uint32_t naddr,uint32_t bytes)1502 qla25xx_read_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
1503 uint32_t bytes)
1504 {
1505 struct qla_hw_data *ha = vha->hw;
1506 uint32_t *dwptr = buf;
1507 uint32_t i;
1508
1509 /* Dword reads to flash. */
1510 naddr = flash_data_addr(ha, ha->flt_region_vpd_nvram | naddr);
1511 bytes >>= 2;
1512 for (i = 0; i < bytes; i++, naddr++, dwptr++) {
1513 if (qla24xx_read_flash_dword(ha, naddr, dwptr))
1514 break;
1515
1516 cpu_to_le32s(dwptr);
1517 }
1518
1519 return buf;
1520 }
1521
1522 #define RMW_BUFFER_SIZE (64 * 1024)
1523 int
qla25xx_write_nvram_data(scsi_qla_host_t * vha,void * buf,uint32_t naddr,uint32_t bytes)1524 qla25xx_write_nvram_data(scsi_qla_host_t *vha, void *buf, uint32_t naddr,
1525 uint32_t bytes)
1526 {
1527 struct qla_hw_data *ha = vha->hw;
1528 uint8_t *dbuf = vmalloc(RMW_BUFFER_SIZE);
1529
1530 if (!dbuf)
1531 return QLA_MEMORY_ALLOC_FAILED;
1532 ha->isp_ops->read_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
1533 RMW_BUFFER_SIZE);
1534 memcpy(dbuf + (naddr << 2), buf, bytes);
1535 ha->isp_ops->write_optrom(vha, dbuf, ha->flt_region_vpd_nvram << 2,
1536 RMW_BUFFER_SIZE);
1537 vfree(dbuf);
1538
1539 return QLA_SUCCESS;
1540 }
1541
1542 static inline void
qla2x00_flip_colors(struct qla_hw_data * ha,uint16_t * pflags)1543 qla2x00_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
1544 {
1545 if (IS_QLA2322(ha)) {
1546 /* Flip all colors. */
1547 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
1548 /* Turn off. */
1549 ha->beacon_color_state = 0;
1550 *pflags = GPIO_LED_ALL_OFF;
1551 } else {
1552 /* Turn on. */
1553 ha->beacon_color_state = QLA_LED_ALL_ON;
1554 *pflags = GPIO_LED_RGA_ON;
1555 }
1556 } else {
1557 /* Flip green led only. */
1558 if (ha->beacon_color_state == QLA_LED_GRN_ON) {
1559 /* Turn off. */
1560 ha->beacon_color_state = 0;
1561 *pflags = GPIO_LED_GREEN_OFF_AMBER_OFF;
1562 } else {
1563 /* Turn on. */
1564 ha->beacon_color_state = QLA_LED_GRN_ON;
1565 *pflags = GPIO_LED_GREEN_ON_AMBER_OFF;
1566 }
1567 }
1568 }
1569
1570 #define PIO_REG(h, r) ((h)->pio_address + offsetof(struct device_reg_2xxx, r))
1571
1572 void
qla2x00_beacon_blink(struct scsi_qla_host * vha)1573 qla2x00_beacon_blink(struct scsi_qla_host *vha)
1574 {
1575 uint16_t gpio_enable;
1576 uint16_t gpio_data;
1577 uint16_t led_color = 0;
1578 unsigned long flags;
1579 struct qla_hw_data *ha = vha->hw;
1580 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1581
1582 if (IS_P3P_TYPE(ha))
1583 return;
1584
1585 spin_lock_irqsave(&ha->hardware_lock, flags);
1586
1587 /* Save the Original GPIOE. */
1588 if (ha->pio_address) {
1589 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
1590 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
1591 } else {
1592 gpio_enable = rd_reg_word(®->gpioe);
1593 gpio_data = rd_reg_word(®->gpiod);
1594 }
1595
1596 /* Set the modified gpio_enable values */
1597 gpio_enable |= GPIO_LED_MASK;
1598
1599 if (ha->pio_address) {
1600 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
1601 } else {
1602 wrt_reg_word(®->gpioe, gpio_enable);
1603 rd_reg_word(®->gpioe);
1604 }
1605
1606 qla2x00_flip_colors(ha, &led_color);
1607
1608 /* Clear out any previously set LED color. */
1609 gpio_data &= ~GPIO_LED_MASK;
1610
1611 /* Set the new input LED color to GPIOD. */
1612 gpio_data |= led_color;
1613
1614 /* Set the modified gpio_data values */
1615 if (ha->pio_address) {
1616 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
1617 } else {
1618 wrt_reg_word(®->gpiod, gpio_data);
1619 rd_reg_word(®->gpiod);
1620 }
1621
1622 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1623 }
1624
1625 int
qla2x00_beacon_on(struct scsi_qla_host * vha)1626 qla2x00_beacon_on(struct scsi_qla_host *vha)
1627 {
1628 uint16_t gpio_enable;
1629 uint16_t gpio_data;
1630 unsigned long flags;
1631 struct qla_hw_data *ha = vha->hw;
1632 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1633
1634 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
1635 ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
1636
1637 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
1638 ql_log(ql_log_warn, vha, 0x709b,
1639 "Unable to update fw options (beacon on).\n");
1640 return QLA_FUNCTION_FAILED;
1641 }
1642
1643 /* Turn off LEDs. */
1644 spin_lock_irqsave(&ha->hardware_lock, flags);
1645 if (ha->pio_address) {
1646 gpio_enable = RD_REG_WORD_PIO(PIO_REG(ha, gpioe));
1647 gpio_data = RD_REG_WORD_PIO(PIO_REG(ha, gpiod));
1648 } else {
1649 gpio_enable = rd_reg_word(®->gpioe);
1650 gpio_data = rd_reg_word(®->gpiod);
1651 }
1652 gpio_enable |= GPIO_LED_MASK;
1653
1654 /* Set the modified gpio_enable values. */
1655 if (ha->pio_address) {
1656 WRT_REG_WORD_PIO(PIO_REG(ha, gpioe), gpio_enable);
1657 } else {
1658 wrt_reg_word(®->gpioe, gpio_enable);
1659 rd_reg_word(®->gpioe);
1660 }
1661
1662 /* Clear out previously set LED colour. */
1663 gpio_data &= ~GPIO_LED_MASK;
1664 if (ha->pio_address) {
1665 WRT_REG_WORD_PIO(PIO_REG(ha, gpiod), gpio_data);
1666 } else {
1667 wrt_reg_word(®->gpiod, gpio_data);
1668 rd_reg_word(®->gpiod);
1669 }
1670 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1671
1672 /*
1673 * Let the per HBA timer kick off the blinking process based on
1674 * the following flags. No need to do anything else now.
1675 */
1676 ha->beacon_blink_led = 1;
1677 ha->beacon_color_state = 0;
1678
1679 return QLA_SUCCESS;
1680 }
1681
1682 int
qla2x00_beacon_off(struct scsi_qla_host * vha)1683 qla2x00_beacon_off(struct scsi_qla_host *vha)
1684 {
1685 int rval = QLA_SUCCESS;
1686 struct qla_hw_data *ha = vha->hw;
1687
1688 ha->beacon_blink_led = 0;
1689
1690 /* Set the on flag so when it gets flipped it will be off. */
1691 if (IS_QLA2322(ha))
1692 ha->beacon_color_state = QLA_LED_ALL_ON;
1693 else
1694 ha->beacon_color_state = QLA_LED_GRN_ON;
1695
1696 ha->isp_ops->beacon_blink(vha); /* This turns green LED off */
1697
1698 ha->fw_options[1] &= ~FO1_SET_EMPHASIS_SWING;
1699 ha->fw_options[1] &= ~FO1_DISABLE_GPIO6_7;
1700
1701 rval = qla2x00_set_fw_options(vha, ha->fw_options);
1702 if (rval != QLA_SUCCESS)
1703 ql_log(ql_log_warn, vha, 0x709c,
1704 "Unable to update fw options (beacon off).\n");
1705 return rval;
1706 }
1707
1708
1709 static inline void
qla24xx_flip_colors(struct qla_hw_data * ha,uint16_t * pflags)1710 qla24xx_flip_colors(struct qla_hw_data *ha, uint16_t *pflags)
1711 {
1712 /* Flip all colors. */
1713 if (ha->beacon_color_state == QLA_LED_ALL_ON) {
1714 /* Turn off. */
1715 ha->beacon_color_state = 0;
1716 *pflags = 0;
1717 } else {
1718 /* Turn on. */
1719 ha->beacon_color_state = QLA_LED_ALL_ON;
1720 *pflags = GPDX_LED_YELLOW_ON | GPDX_LED_AMBER_ON;
1721 }
1722 }
1723
1724 void
qla24xx_beacon_blink(struct scsi_qla_host * vha)1725 qla24xx_beacon_blink(struct scsi_qla_host *vha)
1726 {
1727 uint16_t led_color = 0;
1728 uint32_t gpio_data;
1729 unsigned long flags;
1730 struct qla_hw_data *ha = vha->hw;
1731 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1732
1733 /* Save the Original GPIOD. */
1734 spin_lock_irqsave(&ha->hardware_lock, flags);
1735 gpio_data = rd_reg_dword(®->gpiod);
1736
1737 /* Enable the gpio_data reg for update. */
1738 gpio_data |= GPDX_LED_UPDATE_MASK;
1739
1740 wrt_reg_dword(®->gpiod, gpio_data);
1741 gpio_data = rd_reg_dword(®->gpiod);
1742
1743 /* Set the color bits. */
1744 qla24xx_flip_colors(ha, &led_color);
1745
1746 /* Clear out any previously set LED color. */
1747 gpio_data &= ~GPDX_LED_COLOR_MASK;
1748
1749 /* Set the new input LED color to GPIOD. */
1750 gpio_data |= led_color;
1751
1752 /* Set the modified gpio_data values. */
1753 wrt_reg_dword(®->gpiod, gpio_data);
1754 gpio_data = rd_reg_dword(®->gpiod);
1755 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1756 }
1757
1758 static uint32_t
qla83xx_select_led_port(struct qla_hw_data * ha)1759 qla83xx_select_led_port(struct qla_hw_data *ha)
1760 {
1761 uint32_t led_select_value = 0;
1762
1763 if (!IS_QLA83XX(ha) && !IS_QLA27XX(ha) && !IS_QLA28XX(ha))
1764 goto out;
1765
1766 if (ha->port_no == 0)
1767 led_select_value = QLA83XX_LED_PORT0;
1768 else
1769 led_select_value = QLA83XX_LED_PORT1;
1770
1771 out:
1772 return led_select_value;
1773 }
1774
1775 void
qla83xx_beacon_blink(struct scsi_qla_host * vha)1776 qla83xx_beacon_blink(struct scsi_qla_host *vha)
1777 {
1778 uint32_t led_select_value;
1779 struct qla_hw_data *ha = vha->hw;
1780 uint16_t led_cfg[6];
1781 uint16_t orig_led_cfg[6];
1782 uint32_t led_10_value, led_43_value;
1783
1784 if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha) && !IS_QLA27XX(ha) &&
1785 !IS_QLA28XX(ha))
1786 return;
1787
1788 if (!ha->beacon_blink_led)
1789 return;
1790
1791 if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
1792 qla2x00_write_ram_word(vha, 0x1003, 0x40000230);
1793 qla2x00_write_ram_word(vha, 0x1004, 0x40000230);
1794 } else if (IS_QLA2031(ha)) {
1795 led_select_value = qla83xx_select_led_port(ha);
1796
1797 qla83xx_wr_reg(vha, led_select_value, 0x40000230);
1798 qla83xx_wr_reg(vha, led_select_value + 4, 0x40000230);
1799 } else if (IS_QLA8031(ha)) {
1800 led_select_value = qla83xx_select_led_port(ha);
1801
1802 qla83xx_rd_reg(vha, led_select_value, &led_10_value);
1803 qla83xx_rd_reg(vha, led_select_value + 0x10, &led_43_value);
1804 qla83xx_wr_reg(vha, led_select_value, 0x01f44000);
1805 msleep(500);
1806 qla83xx_wr_reg(vha, led_select_value, 0x400001f4);
1807 msleep(1000);
1808 qla83xx_wr_reg(vha, led_select_value, led_10_value);
1809 qla83xx_wr_reg(vha, led_select_value + 0x10, led_43_value);
1810 } else if (IS_QLA81XX(ha)) {
1811 int rval;
1812
1813 /* Save Current */
1814 rval = qla81xx_get_led_config(vha, orig_led_cfg);
1815 /* Do the blink */
1816 if (rval == QLA_SUCCESS) {
1817 if (IS_QLA81XX(ha)) {
1818 led_cfg[0] = 0x4000;
1819 led_cfg[1] = 0x2000;
1820 led_cfg[2] = 0;
1821 led_cfg[3] = 0;
1822 led_cfg[4] = 0;
1823 led_cfg[5] = 0;
1824 } else {
1825 led_cfg[0] = 0x4000;
1826 led_cfg[1] = 0x4000;
1827 led_cfg[2] = 0x4000;
1828 led_cfg[3] = 0x2000;
1829 led_cfg[4] = 0;
1830 led_cfg[5] = 0x2000;
1831 }
1832 rval = qla81xx_set_led_config(vha, led_cfg);
1833 msleep(1000);
1834 if (IS_QLA81XX(ha)) {
1835 led_cfg[0] = 0x4000;
1836 led_cfg[1] = 0x2000;
1837 led_cfg[2] = 0;
1838 } else {
1839 led_cfg[0] = 0x4000;
1840 led_cfg[1] = 0x2000;
1841 led_cfg[2] = 0x4000;
1842 led_cfg[3] = 0x4000;
1843 led_cfg[4] = 0;
1844 led_cfg[5] = 0x2000;
1845 }
1846 rval = qla81xx_set_led_config(vha, led_cfg);
1847 }
1848 /* On exit, restore original (presumes no status change) */
1849 qla81xx_set_led_config(vha, orig_led_cfg);
1850 }
1851 }
1852
1853 int
qla24xx_beacon_on(struct scsi_qla_host * vha)1854 qla24xx_beacon_on(struct scsi_qla_host *vha)
1855 {
1856 uint32_t gpio_data;
1857 unsigned long flags;
1858 struct qla_hw_data *ha = vha->hw;
1859 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1860
1861 if (IS_P3P_TYPE(ha))
1862 return QLA_SUCCESS;
1863
1864 if (IS_QLA8031(ha) || IS_QLA81XX(ha))
1865 goto skip_gpio; /* let blink handle it */
1866
1867 if (ha->beacon_blink_led == 0) {
1868 /* Enable firmware for update */
1869 ha->fw_options[1] |= ADD_FO1_DISABLE_GPIO_LED_CTRL;
1870
1871 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS)
1872 return QLA_FUNCTION_FAILED;
1873
1874 if (qla2x00_get_fw_options(vha, ha->fw_options) !=
1875 QLA_SUCCESS) {
1876 ql_log(ql_log_warn, vha, 0x7009,
1877 "Unable to update fw options (beacon on).\n");
1878 return QLA_FUNCTION_FAILED;
1879 }
1880
1881 if (IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
1882 goto skip_gpio;
1883
1884 spin_lock_irqsave(&ha->hardware_lock, flags);
1885 gpio_data = rd_reg_dword(®->gpiod);
1886
1887 /* Enable the gpio_data reg for update. */
1888 gpio_data |= GPDX_LED_UPDATE_MASK;
1889 wrt_reg_dword(®->gpiod, gpio_data);
1890 rd_reg_dword(®->gpiod);
1891
1892 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1893 }
1894
1895 /* So all colors blink together. */
1896 ha->beacon_color_state = 0;
1897
1898 skip_gpio:
1899 /* Let the per HBA timer kick off the blinking process. */
1900 ha->beacon_blink_led = 1;
1901
1902 return QLA_SUCCESS;
1903 }
1904
1905 int
qla24xx_beacon_off(struct scsi_qla_host * vha)1906 qla24xx_beacon_off(struct scsi_qla_host *vha)
1907 {
1908 uint32_t gpio_data;
1909 unsigned long flags;
1910 struct qla_hw_data *ha = vha->hw;
1911 struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
1912
1913 if (IS_P3P_TYPE(ha))
1914 return QLA_SUCCESS;
1915
1916 if (!ha->flags.fw_started)
1917 return QLA_SUCCESS;
1918
1919 ha->beacon_blink_led = 0;
1920
1921 if (IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
1922 goto set_fw_options;
1923
1924 if (IS_QLA8031(ha) || IS_QLA81XX(ha))
1925 return QLA_SUCCESS;
1926
1927 ha->beacon_color_state = QLA_LED_ALL_ON;
1928
1929 ha->isp_ops->beacon_blink(vha); /* Will flip to all off. */
1930
1931 /* Give control back to firmware. */
1932 spin_lock_irqsave(&ha->hardware_lock, flags);
1933 gpio_data = rd_reg_dword(®->gpiod);
1934
1935 /* Disable the gpio_data reg for update. */
1936 gpio_data &= ~GPDX_LED_UPDATE_MASK;
1937 wrt_reg_dword(®->gpiod, gpio_data);
1938 rd_reg_dword(®->gpiod);
1939 spin_unlock_irqrestore(&ha->hardware_lock, flags);
1940
1941 set_fw_options:
1942 ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
1943
1944 if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
1945 ql_log(ql_log_warn, vha, 0x704d,
1946 "Unable to update fw options (beacon on).\n");
1947 return QLA_FUNCTION_FAILED;
1948 }
1949
1950 if (qla2x00_get_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
1951 ql_log(ql_log_warn, vha, 0x704e,
1952 "Unable to update fw options (beacon on).\n");
1953 return QLA_FUNCTION_FAILED;
1954 }
1955
1956 return QLA_SUCCESS;
1957 }
1958
1959
1960 /*
1961 * Flash support routines
1962 */
1963
1964 /**
1965 * qla2x00_flash_enable() - Setup flash for reading and writing.
1966 * @ha: HA context
1967 */
1968 static void
qla2x00_flash_enable(struct qla_hw_data * ha)1969 qla2x00_flash_enable(struct qla_hw_data *ha)
1970 {
1971 uint16_t data;
1972 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1973
1974 data = rd_reg_word(®->ctrl_status);
1975 data |= CSR_FLASH_ENABLE;
1976 wrt_reg_word(®->ctrl_status, data);
1977 rd_reg_word(®->ctrl_status); /* PCI Posting. */
1978 }
1979
1980 /**
1981 * qla2x00_flash_disable() - Disable flash and allow RISC to run.
1982 * @ha: HA context
1983 */
1984 static void
qla2x00_flash_disable(struct qla_hw_data * ha)1985 qla2x00_flash_disable(struct qla_hw_data *ha)
1986 {
1987 uint16_t data;
1988 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
1989
1990 data = rd_reg_word(®->ctrl_status);
1991 data &= ~(CSR_FLASH_ENABLE);
1992 wrt_reg_word(®->ctrl_status, data);
1993 rd_reg_word(®->ctrl_status); /* PCI Posting. */
1994 }
1995
1996 /**
1997 * qla2x00_read_flash_byte() - Reads a byte from flash
1998 * @ha: HA context
1999 * @addr: Address in flash to read
2000 *
2001 * A word is read from the chip, but, only the lower byte is valid.
2002 *
2003 * Returns the byte read from flash @addr.
2004 */
2005 static uint8_t
qla2x00_read_flash_byte(struct qla_hw_data * ha,uint32_t addr)2006 qla2x00_read_flash_byte(struct qla_hw_data *ha, uint32_t addr)
2007 {
2008 uint16_t data;
2009 uint16_t bank_select;
2010 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2011
2012 bank_select = rd_reg_word(®->ctrl_status);
2013
2014 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2015 /* Specify 64K address range: */
2016 /* clear out Module Select and Flash Address bits [19:16]. */
2017 bank_select &= ~0xf8;
2018 bank_select |= addr >> 12 & 0xf0;
2019 bank_select |= CSR_FLASH_64K_BANK;
2020 wrt_reg_word(®->ctrl_status, bank_select);
2021 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2022
2023 wrt_reg_word(®->flash_address, (uint16_t)addr);
2024 data = rd_reg_word(®->flash_data);
2025
2026 return (uint8_t)data;
2027 }
2028
2029 /* Setup bit 16 of flash address. */
2030 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
2031 bank_select |= CSR_FLASH_64K_BANK;
2032 wrt_reg_word(®->ctrl_status, bank_select);
2033 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2034 } else if (((addr & BIT_16) == 0) &&
2035 (bank_select & CSR_FLASH_64K_BANK)) {
2036 bank_select &= ~(CSR_FLASH_64K_BANK);
2037 wrt_reg_word(®->ctrl_status, bank_select);
2038 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2039 }
2040
2041 /* Always perform IO mapped accesses to the FLASH registers. */
2042 if (ha->pio_address) {
2043 uint16_t data2;
2044
2045 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
2046 do {
2047 data = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
2048 barrier();
2049 cpu_relax();
2050 data2 = RD_REG_WORD_PIO(PIO_REG(ha, flash_data));
2051 } while (data != data2);
2052 } else {
2053 wrt_reg_word(®->flash_address, (uint16_t)addr);
2054 data = qla2x00_debounce_register(®->flash_data);
2055 }
2056
2057 return (uint8_t)data;
2058 }
2059
2060 /**
2061 * qla2x00_write_flash_byte() - Write a byte to flash
2062 * @ha: HA context
2063 * @addr: Address in flash to write
2064 * @data: Data to write
2065 */
2066 static void
qla2x00_write_flash_byte(struct qla_hw_data * ha,uint32_t addr,uint8_t data)2067 qla2x00_write_flash_byte(struct qla_hw_data *ha, uint32_t addr, uint8_t data)
2068 {
2069 uint16_t bank_select;
2070 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2071
2072 bank_select = rd_reg_word(®->ctrl_status);
2073 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2074 /* Specify 64K address range: */
2075 /* clear out Module Select and Flash Address bits [19:16]. */
2076 bank_select &= ~0xf8;
2077 bank_select |= addr >> 12 & 0xf0;
2078 bank_select |= CSR_FLASH_64K_BANK;
2079 wrt_reg_word(®->ctrl_status, bank_select);
2080 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2081
2082 wrt_reg_word(®->flash_address, (uint16_t)addr);
2083 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2084 wrt_reg_word(®->flash_data, (uint16_t)data);
2085 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2086
2087 return;
2088 }
2089
2090 /* Setup bit 16 of flash address. */
2091 if ((addr & BIT_16) && ((bank_select & CSR_FLASH_64K_BANK) == 0)) {
2092 bank_select |= CSR_FLASH_64K_BANK;
2093 wrt_reg_word(®->ctrl_status, bank_select);
2094 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2095 } else if (((addr & BIT_16) == 0) &&
2096 (bank_select & CSR_FLASH_64K_BANK)) {
2097 bank_select &= ~(CSR_FLASH_64K_BANK);
2098 wrt_reg_word(®->ctrl_status, bank_select);
2099 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2100 }
2101
2102 /* Always perform IO mapped accesses to the FLASH registers. */
2103 if (ha->pio_address) {
2104 WRT_REG_WORD_PIO(PIO_REG(ha, flash_address), (uint16_t)addr);
2105 WRT_REG_WORD_PIO(PIO_REG(ha, flash_data), (uint16_t)data);
2106 } else {
2107 wrt_reg_word(®->flash_address, (uint16_t)addr);
2108 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2109 wrt_reg_word(®->flash_data, (uint16_t)data);
2110 rd_reg_word(®->ctrl_status); /* PCI Posting. */
2111 }
2112 }
2113
2114 /**
2115 * qla2x00_poll_flash() - Polls flash for completion.
2116 * @ha: HA context
2117 * @addr: Address in flash to poll
2118 * @poll_data: Data to be polled
2119 * @man_id: Flash manufacturer ID
2120 * @flash_id: Flash ID
2121 *
2122 * This function polls the device until bit 7 of what is read matches data
2123 * bit 7 or until data bit 5 becomes a 1. If that hapens, the flash ROM timed
2124 * out (a fatal error). The flash book recommeds reading bit 7 again after
2125 * reading bit 5 as a 1.
2126 *
2127 * Returns 0 on success, else non-zero.
2128 */
2129 static int
qla2x00_poll_flash(struct qla_hw_data * ha,uint32_t addr,uint8_t poll_data,uint8_t man_id,uint8_t flash_id)2130 qla2x00_poll_flash(struct qla_hw_data *ha, uint32_t addr, uint8_t poll_data,
2131 uint8_t man_id, uint8_t flash_id)
2132 {
2133 int status;
2134 uint8_t flash_data;
2135 uint32_t cnt;
2136
2137 status = 1;
2138
2139 /* Wait for 30 seconds for command to finish. */
2140 poll_data &= BIT_7;
2141 for (cnt = 3000000; cnt; cnt--) {
2142 flash_data = qla2x00_read_flash_byte(ha, addr);
2143 if ((flash_data & BIT_7) == poll_data) {
2144 status = 0;
2145 break;
2146 }
2147
2148 if (man_id != 0x40 && man_id != 0xda) {
2149 if ((flash_data & BIT_5) && cnt > 2)
2150 cnt = 2;
2151 }
2152 udelay(10);
2153 barrier();
2154 cond_resched();
2155 }
2156 return status;
2157 }
2158
2159 /**
2160 * qla2x00_program_flash_address() - Programs a flash address
2161 * @ha: HA context
2162 * @addr: Address in flash to program
2163 * @data: Data to be written in flash
2164 * @man_id: Flash manufacturer ID
2165 * @flash_id: Flash ID
2166 *
2167 * Returns 0 on success, else non-zero.
2168 */
2169 static int
qla2x00_program_flash_address(struct qla_hw_data * ha,uint32_t addr,uint8_t data,uint8_t man_id,uint8_t flash_id)2170 qla2x00_program_flash_address(struct qla_hw_data *ha, uint32_t addr,
2171 uint8_t data, uint8_t man_id, uint8_t flash_id)
2172 {
2173 /* Write Program Command Sequence. */
2174 if (IS_OEM_001(ha)) {
2175 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
2176 qla2x00_write_flash_byte(ha, 0x555, 0x55);
2177 qla2x00_write_flash_byte(ha, 0xaaa, 0xa0);
2178 qla2x00_write_flash_byte(ha, addr, data);
2179 } else {
2180 if (man_id == 0xda && flash_id == 0xc1) {
2181 qla2x00_write_flash_byte(ha, addr, data);
2182 if (addr & 0x7e)
2183 return 0;
2184 } else {
2185 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2186 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2187 qla2x00_write_flash_byte(ha, 0x5555, 0xa0);
2188 qla2x00_write_flash_byte(ha, addr, data);
2189 }
2190 }
2191
2192 udelay(150);
2193
2194 /* Wait for write to complete. */
2195 return qla2x00_poll_flash(ha, addr, data, man_id, flash_id);
2196 }
2197
2198 /**
2199 * qla2x00_erase_flash() - Erase the flash.
2200 * @ha: HA context
2201 * @man_id: Flash manufacturer ID
2202 * @flash_id: Flash ID
2203 *
2204 * Returns 0 on success, else non-zero.
2205 */
2206 static int
qla2x00_erase_flash(struct qla_hw_data * ha,uint8_t man_id,uint8_t flash_id)2207 qla2x00_erase_flash(struct qla_hw_data *ha, uint8_t man_id, uint8_t flash_id)
2208 {
2209 /* Individual Sector Erase Command Sequence */
2210 if (IS_OEM_001(ha)) {
2211 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
2212 qla2x00_write_flash_byte(ha, 0x555, 0x55);
2213 qla2x00_write_flash_byte(ha, 0xaaa, 0x80);
2214 qla2x00_write_flash_byte(ha, 0xaaa, 0xaa);
2215 qla2x00_write_flash_byte(ha, 0x555, 0x55);
2216 qla2x00_write_flash_byte(ha, 0xaaa, 0x10);
2217 } else {
2218 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2219 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2220 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
2221 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2222 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2223 qla2x00_write_flash_byte(ha, 0x5555, 0x10);
2224 }
2225
2226 udelay(150);
2227
2228 /* Wait for erase to complete. */
2229 return qla2x00_poll_flash(ha, 0x00, 0x80, man_id, flash_id);
2230 }
2231
2232 /**
2233 * qla2x00_erase_flash_sector() - Erase a flash sector.
2234 * @ha: HA context
2235 * @addr: Flash sector to erase
2236 * @sec_mask: Sector address mask
2237 * @man_id: Flash manufacturer ID
2238 * @flash_id: Flash ID
2239 *
2240 * Returns 0 on success, else non-zero.
2241 */
2242 static int
qla2x00_erase_flash_sector(struct qla_hw_data * ha,uint32_t addr,uint32_t sec_mask,uint8_t man_id,uint8_t flash_id)2243 qla2x00_erase_flash_sector(struct qla_hw_data *ha, uint32_t addr,
2244 uint32_t sec_mask, uint8_t man_id, uint8_t flash_id)
2245 {
2246 /* Individual Sector Erase Command Sequence */
2247 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2248 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2249 qla2x00_write_flash_byte(ha, 0x5555, 0x80);
2250 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2251 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2252 if (man_id == 0x1f && flash_id == 0x13)
2253 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x10);
2254 else
2255 qla2x00_write_flash_byte(ha, addr & sec_mask, 0x30);
2256
2257 udelay(150);
2258
2259 /* Wait for erase to complete. */
2260 return qla2x00_poll_flash(ha, addr, 0x80, man_id, flash_id);
2261 }
2262
2263 /**
2264 * qla2x00_get_flash_manufacturer() - Read manufacturer ID from flash chip.
2265 * @ha: host adapter
2266 * @man_id: Flash manufacturer ID
2267 * @flash_id: Flash ID
2268 */
2269 static void
qla2x00_get_flash_manufacturer(struct qla_hw_data * ha,uint8_t * man_id,uint8_t * flash_id)2270 qla2x00_get_flash_manufacturer(struct qla_hw_data *ha, uint8_t *man_id,
2271 uint8_t *flash_id)
2272 {
2273 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2274 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2275 qla2x00_write_flash_byte(ha, 0x5555, 0x90);
2276 *man_id = qla2x00_read_flash_byte(ha, 0x0000);
2277 *flash_id = qla2x00_read_flash_byte(ha, 0x0001);
2278 qla2x00_write_flash_byte(ha, 0x5555, 0xaa);
2279 qla2x00_write_flash_byte(ha, 0x2aaa, 0x55);
2280 qla2x00_write_flash_byte(ha, 0x5555, 0xf0);
2281 }
2282
2283 static void
qla2x00_read_flash_data(struct qla_hw_data * ha,uint8_t * tmp_buf,uint32_t saddr,uint32_t length)2284 qla2x00_read_flash_data(struct qla_hw_data *ha, uint8_t *tmp_buf,
2285 uint32_t saddr, uint32_t length)
2286 {
2287 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2288 uint32_t midpoint, ilength;
2289 uint8_t data;
2290
2291 midpoint = length / 2;
2292
2293 wrt_reg_word(®->nvram, 0);
2294 rd_reg_word(®->nvram);
2295 for (ilength = 0; ilength < length; saddr++, ilength++, tmp_buf++) {
2296 if (ilength == midpoint) {
2297 wrt_reg_word(®->nvram, NVR_SELECT);
2298 rd_reg_word(®->nvram);
2299 }
2300 data = qla2x00_read_flash_byte(ha, saddr);
2301 if (saddr % 100)
2302 udelay(10);
2303 *tmp_buf = data;
2304 cond_resched();
2305 }
2306 }
2307
2308 static inline void
qla2x00_suspend_hba(struct scsi_qla_host * vha)2309 qla2x00_suspend_hba(struct scsi_qla_host *vha)
2310 {
2311 int cnt;
2312 unsigned long flags;
2313 struct qla_hw_data *ha = vha->hw;
2314 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2315
2316 /* Suspend HBA. */
2317 scsi_block_requests(vha->host);
2318 ha->isp_ops->disable_intrs(ha);
2319 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2320
2321 /* Pause RISC. */
2322 spin_lock_irqsave(&ha->hardware_lock, flags);
2323 wrt_reg_word(®->hccr, HCCR_PAUSE_RISC);
2324 rd_reg_word(®->hccr);
2325 if (IS_QLA2100(ha) || IS_QLA2200(ha) || IS_QLA2300(ha)) {
2326 for (cnt = 0; cnt < 30000; cnt++) {
2327 if ((rd_reg_word(®->hccr) & HCCR_RISC_PAUSE) != 0)
2328 break;
2329 udelay(100);
2330 }
2331 } else {
2332 udelay(10);
2333 }
2334 spin_unlock_irqrestore(&ha->hardware_lock, flags);
2335 }
2336
2337 static inline void
qla2x00_resume_hba(struct scsi_qla_host * vha)2338 qla2x00_resume_hba(struct scsi_qla_host *vha)
2339 {
2340 struct qla_hw_data *ha = vha->hw;
2341
2342 /* Resume HBA. */
2343 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2344 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2345 qla2xxx_wake_dpc(vha);
2346 qla2x00_wait_for_chip_reset(vha);
2347 scsi_unblock_requests(vha->host);
2348 }
2349
2350 void *
qla2x00_read_optrom_data(struct scsi_qla_host * vha,void * buf,uint32_t offset,uint32_t length)2351 qla2x00_read_optrom_data(struct scsi_qla_host *vha, void *buf,
2352 uint32_t offset, uint32_t length)
2353 {
2354 uint32_t addr, midpoint;
2355 uint8_t *data;
2356 struct qla_hw_data *ha = vha->hw;
2357 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2358
2359 /* Suspend HBA. */
2360 qla2x00_suspend_hba(vha);
2361
2362 /* Go with read. */
2363 midpoint = ha->optrom_size / 2;
2364
2365 qla2x00_flash_enable(ha);
2366 wrt_reg_word(®->nvram, 0);
2367 rd_reg_word(®->nvram); /* PCI Posting. */
2368 for (addr = offset, data = buf; addr < length; addr++, data++) {
2369 if (addr == midpoint) {
2370 wrt_reg_word(®->nvram, NVR_SELECT);
2371 rd_reg_word(®->nvram); /* PCI Posting. */
2372 }
2373
2374 *data = qla2x00_read_flash_byte(ha, addr);
2375 }
2376 qla2x00_flash_disable(ha);
2377
2378 /* Resume HBA. */
2379 qla2x00_resume_hba(vha);
2380
2381 return buf;
2382 }
2383
2384 int
qla2x00_write_optrom_data(struct scsi_qla_host * vha,void * buf,uint32_t offset,uint32_t length)2385 qla2x00_write_optrom_data(struct scsi_qla_host *vha, void *buf,
2386 uint32_t offset, uint32_t length)
2387 {
2388
2389 int rval;
2390 uint8_t man_id, flash_id, sec_number, *data;
2391 uint16_t wd;
2392 uint32_t addr, liter, sec_mask, rest_addr;
2393 struct qla_hw_data *ha = vha->hw;
2394 struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
2395
2396 /* Suspend HBA. */
2397 qla2x00_suspend_hba(vha);
2398
2399 rval = QLA_SUCCESS;
2400 sec_number = 0;
2401
2402 /* Reset ISP chip. */
2403 wrt_reg_word(®->ctrl_status, CSR_ISP_SOFT_RESET);
2404 pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
2405
2406 /* Go with write. */
2407 qla2x00_flash_enable(ha);
2408 do { /* Loop once to provide quick error exit */
2409 /* Structure of flash memory based on manufacturer */
2410 if (IS_OEM_001(ha)) {
2411 /* OEM variant with special flash part. */
2412 man_id = flash_id = 0;
2413 rest_addr = 0xffff;
2414 sec_mask = 0x10000;
2415 goto update_flash;
2416 }
2417 qla2x00_get_flash_manufacturer(ha, &man_id, &flash_id);
2418 switch (man_id) {
2419 case 0x20: /* ST flash. */
2420 if (flash_id == 0xd2 || flash_id == 0xe3) {
2421 /*
2422 * ST m29w008at part - 64kb sector size with
2423 * 32kb,8kb,8kb,16kb sectors at memory address
2424 * 0xf0000.
2425 */
2426 rest_addr = 0xffff;
2427 sec_mask = 0x10000;
2428 break;
2429 }
2430 /*
2431 * ST m29w010b part - 16kb sector size
2432 * Default to 16kb sectors
2433 */
2434 rest_addr = 0x3fff;
2435 sec_mask = 0x1c000;
2436 break;
2437 case 0x40: /* Mostel flash. */
2438 /* Mostel v29c51001 part - 512 byte sector size. */
2439 rest_addr = 0x1ff;
2440 sec_mask = 0x1fe00;
2441 break;
2442 case 0xbf: /* SST flash. */
2443 /* SST39sf10 part - 4kb sector size. */
2444 rest_addr = 0xfff;
2445 sec_mask = 0x1f000;
2446 break;
2447 case 0xda: /* Winbond flash. */
2448 /* Winbond W29EE011 part - 256 byte sector size. */
2449 rest_addr = 0x7f;
2450 sec_mask = 0x1ff80;
2451 break;
2452 case 0xc2: /* Macronix flash. */
2453 /* 64k sector size. */
2454 if (flash_id == 0x38 || flash_id == 0x4f) {
2455 rest_addr = 0xffff;
2456 sec_mask = 0x10000;
2457 break;
2458 }
2459 fallthrough;
2460
2461 case 0x1f: /* Atmel flash. */
2462 /* 512k sector size. */
2463 if (flash_id == 0x13) {
2464 rest_addr = 0x7fffffff;
2465 sec_mask = 0x80000000;
2466 break;
2467 }
2468 fallthrough;
2469
2470 case 0x01: /* AMD flash. */
2471 if (flash_id == 0x38 || flash_id == 0x40 ||
2472 flash_id == 0x4f) {
2473 /* Am29LV081 part - 64kb sector size. */
2474 /* Am29LV002BT part - 64kb sector size. */
2475 rest_addr = 0xffff;
2476 sec_mask = 0x10000;
2477 break;
2478 } else if (flash_id == 0x3e) {
2479 /*
2480 * Am29LV008b part - 64kb sector size with
2481 * 32kb,8kb,8kb,16kb sector at memory address
2482 * h0xf0000.
2483 */
2484 rest_addr = 0xffff;
2485 sec_mask = 0x10000;
2486 break;
2487 } else if (flash_id == 0x20 || flash_id == 0x6e) {
2488 /*
2489 * Am29LV010 part or AM29f010 - 16kb sector
2490 * size.
2491 */
2492 rest_addr = 0x3fff;
2493 sec_mask = 0x1c000;
2494 break;
2495 } else if (flash_id == 0x6d) {
2496 /* Am29LV001 part - 8kb sector size. */
2497 rest_addr = 0x1fff;
2498 sec_mask = 0x1e000;
2499 break;
2500 }
2501 fallthrough;
2502 default:
2503 /* Default to 16 kb sector size. */
2504 rest_addr = 0x3fff;
2505 sec_mask = 0x1c000;
2506 break;
2507 }
2508
2509 update_flash:
2510 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2511 if (qla2x00_erase_flash(ha, man_id, flash_id)) {
2512 rval = QLA_FUNCTION_FAILED;
2513 break;
2514 }
2515 }
2516
2517 for (addr = offset, liter = 0; liter < length; liter++,
2518 addr++) {
2519 data = buf + liter;
2520 /* Are we at the beginning of a sector? */
2521 if ((addr & rest_addr) == 0) {
2522 if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
2523 if (addr >= 0x10000UL) {
2524 if (((addr >> 12) & 0xf0) &&
2525 ((man_id == 0x01 &&
2526 flash_id == 0x3e) ||
2527 (man_id == 0x20 &&
2528 flash_id == 0xd2))) {
2529 sec_number++;
2530 if (sec_number == 1) {
2531 rest_addr =
2532 0x7fff;
2533 sec_mask =
2534 0x18000;
2535 } else if (
2536 sec_number == 2 ||
2537 sec_number == 3) {
2538 rest_addr =
2539 0x1fff;
2540 sec_mask =
2541 0x1e000;
2542 } else if (
2543 sec_number == 4) {
2544 rest_addr =
2545 0x3fff;
2546 sec_mask =
2547 0x1c000;
2548 }
2549 }
2550 }
2551 } else if (addr == ha->optrom_size / 2) {
2552 wrt_reg_word(®->nvram, NVR_SELECT);
2553 rd_reg_word(®->nvram);
2554 }
2555
2556 if (flash_id == 0xda && man_id == 0xc1) {
2557 qla2x00_write_flash_byte(ha, 0x5555,
2558 0xaa);
2559 qla2x00_write_flash_byte(ha, 0x2aaa,
2560 0x55);
2561 qla2x00_write_flash_byte(ha, 0x5555,
2562 0xa0);
2563 } else if (!IS_QLA2322(ha) && !IS_QLA6322(ha)) {
2564 /* Then erase it */
2565 if (qla2x00_erase_flash_sector(ha,
2566 addr, sec_mask, man_id,
2567 flash_id)) {
2568 rval = QLA_FUNCTION_FAILED;
2569 break;
2570 }
2571 if (man_id == 0x01 && flash_id == 0x6d)
2572 sec_number++;
2573 }
2574 }
2575
2576 if (man_id == 0x01 && flash_id == 0x6d) {
2577 if (sec_number == 1 &&
2578 addr == (rest_addr - 1)) {
2579 rest_addr = 0x0fff;
2580 sec_mask = 0x1f000;
2581 } else if (sec_number == 3 && (addr & 0x7ffe)) {
2582 rest_addr = 0x3fff;
2583 sec_mask = 0x1c000;
2584 }
2585 }
2586
2587 if (qla2x00_program_flash_address(ha, addr, *data,
2588 man_id, flash_id)) {
2589 rval = QLA_FUNCTION_FAILED;
2590 break;
2591 }
2592 cond_resched();
2593 }
2594 } while (0);
2595 qla2x00_flash_disable(ha);
2596
2597 /* Resume HBA. */
2598 qla2x00_resume_hba(vha);
2599
2600 return rval;
2601 }
2602
2603 void *
qla24xx_read_optrom_data(struct scsi_qla_host * vha,void * buf,uint32_t offset,uint32_t length)2604 qla24xx_read_optrom_data(struct scsi_qla_host *vha, void *buf,
2605 uint32_t offset, uint32_t length)
2606 {
2607 struct qla_hw_data *ha = vha->hw;
2608
2609 /* Suspend HBA. */
2610 scsi_block_requests(vha->host);
2611 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2612
2613 /* Go with read. */
2614 qla24xx_read_flash_data(vha, buf, offset >> 2, length >> 2);
2615
2616 /* Resume HBA. */
2617 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2618 scsi_unblock_requests(vha->host);
2619
2620 return buf;
2621 }
2622
2623 static int
qla28xx_extract_sfub_and_verify(struct scsi_qla_host * vha,__le32 * buf,uint32_t len,uint32_t buf_size_without_sfub,uint8_t * sfub_buf)2624 qla28xx_extract_sfub_and_verify(struct scsi_qla_host *vha, __le32 *buf,
2625 uint32_t len, uint32_t buf_size_without_sfub, uint8_t *sfub_buf)
2626 {
2627 uint32_t check_sum = 0;
2628 __le32 *p;
2629 int i;
2630
2631 p = buf + buf_size_without_sfub;
2632
2633 /* Extract SFUB from end of file */
2634 memcpy(sfub_buf, (uint8_t *)p,
2635 sizeof(struct secure_flash_update_block));
2636
2637 for (i = 0; i < (sizeof(struct secure_flash_update_block) >> 2); i++)
2638 check_sum += le32_to_cpu(p[i]);
2639
2640 check_sum = (~check_sum) + 1;
2641
2642 if (check_sum != le32_to_cpu(p[i])) {
2643 ql_log(ql_log_warn, vha, 0x7097,
2644 "SFUB checksum failed, 0x%x, 0x%x\n",
2645 check_sum, le32_to_cpu(p[i]));
2646 return QLA_COMMAND_ERROR;
2647 }
2648
2649 return QLA_SUCCESS;
2650 }
2651
2652 static int
qla28xx_get_flash_region(struct scsi_qla_host * vha,uint32_t start,struct qla_flt_region * region)2653 qla28xx_get_flash_region(struct scsi_qla_host *vha, uint32_t start,
2654 struct qla_flt_region *region)
2655 {
2656 struct qla_hw_data *ha = vha->hw;
2657 struct qla_flt_header *flt = ha->flt;
2658 struct qla_flt_region *flt_reg = &flt->region[0];
2659 uint16_t cnt;
2660 int rval = QLA_FUNCTION_FAILED;
2661
2662 if (!ha->flt)
2663 return QLA_FUNCTION_FAILED;
2664
2665 cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
2666 for (; cnt; cnt--, flt_reg++) {
2667 if (le32_to_cpu(flt_reg->start) == start) {
2668 memcpy((uint8_t *)region, flt_reg,
2669 sizeof(struct qla_flt_region));
2670 rval = QLA_SUCCESS;
2671 break;
2672 }
2673 }
2674
2675 return rval;
2676 }
2677
2678 static int
qla28xx_write_flash_data(scsi_qla_host_t * vha,uint32_t * dwptr,uint32_t faddr,uint32_t dwords)2679 qla28xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr,
2680 uint32_t dwords)
2681 {
2682 struct qla_hw_data *ha = vha->hw;
2683 ulong liter;
2684 ulong dburst = OPTROM_BURST_DWORDS; /* burst size in dwords */
2685 uint32_t sec_mask, rest_addr, fdata;
2686 void *optrom = NULL;
2687 dma_addr_t optrom_dma;
2688 int rval, ret;
2689 struct secure_flash_update_block *sfub;
2690 dma_addr_t sfub_dma;
2691 uint32_t offset = faddr << 2;
2692 uint32_t buf_size_without_sfub = 0;
2693 struct qla_flt_region region;
2694 bool reset_to_rom = false;
2695 uint32_t risc_size, risc_attr = 0;
2696 __be32 *fw_array = NULL;
2697
2698 /* Retrieve region info - must be a start address passed in */
2699 rval = qla28xx_get_flash_region(vha, offset, ®ion);
2700
2701 if (rval != QLA_SUCCESS) {
2702 ql_log(ql_log_warn, vha, 0xffff,
2703 "Invalid address %x - not a region start address\n",
2704 offset);
2705 goto done;
2706 }
2707
2708 /* Allocate dma buffer for burst write */
2709 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
2710 &optrom_dma, GFP_KERNEL);
2711 if (!optrom) {
2712 ql_log(ql_log_warn, vha, 0x7095,
2713 "Failed allocate burst (%x bytes)\n", OPTROM_BURST_SIZE);
2714 rval = QLA_COMMAND_ERROR;
2715 goto done;
2716 }
2717
2718 /*
2719 * If adapter supports secure flash and region is secure
2720 * extract secure flash update block (SFUB) and verify
2721 */
2722 if (ha->flags.secure_adapter && region.attribute) {
2723
2724 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
2725 "Region %x is secure\n", le16_to_cpu(region.code));
2726
2727 switch (le16_to_cpu(region.code)) {
2728 case FLT_REG_FW:
2729 case FLT_REG_FW_SEC_27XX:
2730 case FLT_REG_MPI_PRI_28XX:
2731 case FLT_REG_MPI_SEC_28XX:
2732 fw_array = (__force __be32 *)dwptr;
2733
2734 /* 1st fw array */
2735 risc_size = be32_to_cpu(fw_array[3]);
2736 risc_attr = be32_to_cpu(fw_array[9]);
2737
2738 buf_size_without_sfub = risc_size;
2739 fw_array += risc_size;
2740
2741 /* 2nd fw array */
2742 risc_size = be32_to_cpu(fw_array[3]);
2743
2744 buf_size_without_sfub += risc_size;
2745 fw_array += risc_size;
2746
2747 /* 1st dump template */
2748 risc_size = be32_to_cpu(fw_array[2]);
2749
2750 /* skip header and ignore checksum */
2751 buf_size_without_sfub += risc_size;
2752 fw_array += risc_size;
2753
2754 if (risc_attr & BIT_9) {
2755 /* 2nd dump template */
2756 risc_size = be32_to_cpu(fw_array[2]);
2757
2758 /* skip header and ignore checksum */
2759 buf_size_without_sfub += risc_size;
2760 fw_array += risc_size;
2761 }
2762 break;
2763
2764 case FLT_REG_PEP_PRI_28XX:
2765 case FLT_REG_PEP_SEC_28XX:
2766 fw_array = (__force __be32 *)dwptr;
2767
2768 /* 1st fw array */
2769 risc_size = be32_to_cpu(fw_array[3]);
2770 risc_attr = be32_to_cpu(fw_array[9]);
2771
2772 buf_size_without_sfub = risc_size;
2773 fw_array += risc_size;
2774 break;
2775
2776 default:
2777 ql_log(ql_log_warn + ql_dbg_verbose, vha,
2778 0xffff, "Secure region %x not supported\n",
2779 le16_to_cpu(region.code));
2780 rval = QLA_COMMAND_ERROR;
2781 goto done;
2782 }
2783
2784 sfub = dma_alloc_coherent(&ha->pdev->dev,
2785 sizeof(struct secure_flash_update_block), &sfub_dma,
2786 GFP_KERNEL);
2787 if (!sfub) {
2788 ql_log(ql_log_warn, vha, 0xffff,
2789 "Unable to allocate memory for SFUB\n");
2790 rval = QLA_COMMAND_ERROR;
2791 goto done;
2792 }
2793
2794 rval = qla28xx_extract_sfub_and_verify(vha, (__le32 *)dwptr,
2795 dwords, buf_size_without_sfub, (uint8_t *)sfub);
2796
2797 if (rval != QLA_SUCCESS)
2798 goto done;
2799
2800 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
2801 "SFUB extract and verify successful\n");
2802 }
2803
2804 rest_addr = (ha->fdt_block_size >> 2) - 1;
2805 sec_mask = ~rest_addr;
2806
2807 /* Lock semaphore */
2808 rval = qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_LOCK);
2809 if (rval != QLA_SUCCESS) {
2810 ql_log(ql_log_warn, vha, 0xffff,
2811 "Unable to lock flash semaphore.");
2812 goto done;
2813 }
2814
2815 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
2816 "Unprotect flash...\n");
2817 rval = qla24xx_unprotect_flash(vha);
2818 if (rval) {
2819 qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
2820 ql_log(ql_log_warn, vha, 0x7096, "Failed unprotect flash\n");
2821 goto done;
2822 }
2823
2824 for (liter = 0; liter < dwords; liter++, faddr++) {
2825 fdata = (faddr & sec_mask) << 2;
2826
2827 /* If start of sector */
2828 if (!(faddr & rest_addr)) {
2829 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
2830 "Erase sector %#x...\n", faddr);
2831 rval = qla24xx_erase_sector(vha, fdata);
2832 if (rval) {
2833 ql_dbg(ql_dbg_user, vha, 0x7007,
2834 "Failed erase sector %#x\n", faddr);
2835 goto write_protect;
2836 }
2837 }
2838 }
2839
2840 if (ha->flags.secure_adapter) {
2841 /*
2842 * If adapter supports secure flash but FW doesn't,
2843 * disable write protect, release semaphore and reset
2844 * chip to execute ROM code in order to update region securely
2845 */
2846 if (!ha->flags.secure_fw) {
2847 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
2848 "Disable Write and Release Semaphore.");
2849 rval = qla24xx_protect_flash(vha);
2850 if (rval != QLA_SUCCESS) {
2851 qla81xx_fac_semaphore_access(vha,
2852 FAC_SEMAPHORE_UNLOCK);
2853 ql_log(ql_log_warn, vha, 0xffff,
2854 "Unable to protect flash.");
2855 goto done;
2856 }
2857
2858 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
2859 "Reset chip to ROM.");
2860 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2861 set_bit(ISP_ABORT_TO_ROM, &vha->dpc_flags);
2862 qla2xxx_wake_dpc(vha);
2863 rval = qla2x00_wait_for_chip_reset(vha);
2864 if (rval != QLA_SUCCESS) {
2865 ql_log(ql_log_warn, vha, 0xffff,
2866 "Unable to reset to ROM code.");
2867 goto done;
2868 }
2869 reset_to_rom = true;
2870 ha->flags.fac_supported = 0;
2871
2872 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
2873 "Lock Semaphore");
2874 rval = qla2xxx_write_remote_register(vha,
2875 FLASH_SEMAPHORE_REGISTER_ADDR, 0x00020002);
2876 if (rval != QLA_SUCCESS) {
2877 ql_log(ql_log_warn, vha, 0xffff,
2878 "Unable to lock flash semaphore.");
2879 goto done;
2880 }
2881
2882 /* Unprotect flash */
2883 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
2884 "Enable Write.");
2885 rval = qla2x00_write_ram_word(vha, 0x7ffd0101, 0);
2886 if (rval) {
2887 ql_log(ql_log_warn, vha, 0x7096,
2888 "Failed unprotect flash\n");
2889 goto done;
2890 }
2891 }
2892
2893 /* If region is secure, send Secure Flash MB Cmd */
2894 if (region.attribute && buf_size_without_sfub) {
2895 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0xffff,
2896 "Sending Secure Flash MB Cmd\n");
2897 rval = qla28xx_secure_flash_update(vha, 0,
2898 le16_to_cpu(region.code),
2899 buf_size_without_sfub, sfub_dma,
2900 sizeof(struct secure_flash_update_block) >> 2);
2901 if (rval != QLA_SUCCESS) {
2902 ql_log(ql_log_warn, vha, 0xffff,
2903 "Secure Flash MB Cmd failed %x.", rval);
2904 goto write_protect;
2905 }
2906 }
2907
2908 }
2909
2910 /* re-init flash offset */
2911 faddr = offset >> 2;
2912
2913 for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) {
2914 fdata = (faddr & sec_mask) << 2;
2915
2916 /* If smaller than a burst remaining */
2917 if (dwords - liter < dburst)
2918 dburst = dwords - liter;
2919
2920 /* Copy to dma buffer */
2921 memcpy(optrom, dwptr, dburst << 2);
2922
2923 /* Burst write */
2924 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
2925 "Write burst (%#lx dwords)...\n", dburst);
2926 rval = qla2x00_load_ram(vha, optrom_dma,
2927 flash_data_addr(ha, faddr), dburst);
2928 if (rval != QLA_SUCCESS) {
2929 ql_log(ql_log_warn, vha, 0x7097,
2930 "Failed burst write at %x (%p/%#llx)...\n",
2931 flash_data_addr(ha, faddr), optrom,
2932 (u64)optrom_dma);
2933 break;
2934 }
2935
2936 liter += dburst - 1;
2937 faddr += dburst - 1;
2938 dwptr += dburst - 1;
2939 }
2940
2941 write_protect:
2942 ql_log(ql_log_warn + ql_dbg_verbose, vha, 0x7095,
2943 "Protect flash...\n");
2944 ret = qla24xx_protect_flash(vha);
2945 if (ret) {
2946 qla81xx_fac_semaphore_access(vha, FAC_SEMAPHORE_UNLOCK);
2947 ql_log(ql_log_warn, vha, 0x7099,
2948 "Failed protect flash\n");
2949 rval = QLA_COMMAND_ERROR;
2950 }
2951
2952 if (reset_to_rom == true) {
2953 /* Schedule DPC to restart the RISC */
2954 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
2955 qla2xxx_wake_dpc(vha);
2956
2957 ret = qla2x00_wait_for_hba_online(vha);
2958 if (ret != QLA_SUCCESS) {
2959 ql_log(ql_log_warn, vha, 0xffff,
2960 "Adapter did not come out of reset\n");
2961 rval = QLA_COMMAND_ERROR;
2962 }
2963 }
2964
2965 done:
2966 if (optrom)
2967 dma_free_coherent(&ha->pdev->dev,
2968 OPTROM_BURST_SIZE, optrom, optrom_dma);
2969
2970 return rval;
2971 }
2972
2973 int
qla24xx_write_optrom_data(struct scsi_qla_host * vha,void * buf,uint32_t offset,uint32_t length)2974 qla24xx_write_optrom_data(struct scsi_qla_host *vha, void *buf,
2975 uint32_t offset, uint32_t length)
2976 {
2977 int rval;
2978 struct qla_hw_data *ha = vha->hw;
2979
2980 /* Suspend HBA. */
2981 scsi_block_requests(vha->host);
2982 set_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2983
2984 /* Go with write. */
2985 if (IS_QLA28XX(ha))
2986 rval = qla28xx_write_flash_data(vha, buf, offset >> 2,
2987 length >> 2);
2988 else
2989 rval = qla24xx_write_flash_data(vha, buf, offset >> 2,
2990 length >> 2);
2991
2992 clear_bit(MBX_UPDATE_FLASH_ACTIVE, &ha->mbx_cmd_flags);
2993 scsi_unblock_requests(vha->host);
2994
2995 return rval;
2996 }
2997
2998 void *
qla25xx_read_optrom_data(struct scsi_qla_host * vha,void * buf,uint32_t offset,uint32_t length)2999 qla25xx_read_optrom_data(struct scsi_qla_host *vha, void *buf,
3000 uint32_t offset, uint32_t length)
3001 {
3002 int rval;
3003 dma_addr_t optrom_dma;
3004 void *optrom;
3005 uint8_t *pbuf;
3006 uint32_t faddr, left, burst;
3007 struct qla_hw_data *ha = vha->hw;
3008
3009 if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
3010 IS_QLA27XX(ha) || IS_QLA28XX(ha))
3011 goto try_fast;
3012 if (offset & 0xfff)
3013 goto slow_read;
3014 if (length < OPTROM_BURST_SIZE)
3015 goto slow_read;
3016
3017 try_fast:
3018 if (offset & 0xff)
3019 goto slow_read;
3020 optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
3021 &optrom_dma, GFP_KERNEL);
3022 if (!optrom) {
3023 ql_log(ql_log_warn, vha, 0x00cc,
3024 "Unable to allocate memory for optrom burst read (%x KB).\n",
3025 OPTROM_BURST_SIZE / 1024);
3026 goto slow_read;
3027 }
3028
3029 pbuf = buf;
3030 faddr = offset >> 2;
3031 left = length >> 2;
3032 burst = OPTROM_BURST_DWORDS;
3033 while (left != 0) {
3034 if (burst > left)
3035 burst = left;
3036
3037 rval = qla2x00_dump_ram(vha, optrom_dma,
3038 flash_data_addr(ha, faddr), burst);
3039 if (rval) {
3040 ql_log(ql_log_warn, vha, 0x00f5,
3041 "Unable to burst-read optrom segment (%x/%x/%llx).\n",
3042 rval, flash_data_addr(ha, faddr),
3043 (unsigned long long)optrom_dma);
3044 ql_log(ql_log_warn, vha, 0x00f6,
3045 "Reverting to slow-read.\n");
3046
3047 dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
3048 optrom, optrom_dma);
3049 goto slow_read;
3050 }
3051
3052 memcpy(pbuf, optrom, burst * 4);
3053
3054 left -= burst;
3055 faddr += burst;
3056 pbuf += burst * 4;
3057 }
3058
3059 dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, optrom,
3060 optrom_dma);
3061
3062 return buf;
3063
3064 slow_read:
3065 return qla24xx_read_optrom_data(vha, buf, offset, length);
3066 }
3067
3068 /**
3069 * qla2x00_get_fcode_version() - Determine an FCODE image's version.
3070 * @ha: HA context
3071 * @pcids: Pointer to the FCODE PCI data structure
3072 *
3073 * The process of retrieving the FCODE version information is at best
3074 * described as interesting.
3075 *
3076 * Within the first 100h bytes of the image an ASCII string is present
3077 * which contains several pieces of information including the FCODE
3078 * version. Unfortunately it seems the only reliable way to retrieve
3079 * the version is by scanning for another sentinel within the string,
3080 * the FCODE build date:
3081 *
3082 * ... 2.00.02 10/17/02 ...
3083 *
3084 * Returns QLA_SUCCESS on successful retrieval of version.
3085 */
3086 static void
qla2x00_get_fcode_version(struct qla_hw_data * ha,uint32_t pcids)3087 qla2x00_get_fcode_version(struct qla_hw_data *ha, uint32_t pcids)
3088 {
3089 int ret = QLA_FUNCTION_FAILED;
3090 uint32_t istart, iend, iter, vend;
3091 uint8_t do_next, rbyte, *vbyte;
3092
3093 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
3094
3095 /* Skip the PCI data structure. */
3096 istart = pcids +
3097 ((qla2x00_read_flash_byte(ha, pcids + 0x0B) << 8) |
3098 qla2x00_read_flash_byte(ha, pcids + 0x0A));
3099 iend = istart + 0x100;
3100 do {
3101 /* Scan for the sentinel date string...eeewww. */
3102 do_next = 0;
3103 iter = istart;
3104 while ((iter < iend) && !do_next) {
3105 iter++;
3106 if (qla2x00_read_flash_byte(ha, iter) == '/') {
3107 if (qla2x00_read_flash_byte(ha, iter + 2) ==
3108 '/')
3109 do_next++;
3110 else if (qla2x00_read_flash_byte(ha,
3111 iter + 3) == '/')
3112 do_next++;
3113 }
3114 }
3115 if (!do_next)
3116 break;
3117
3118 /* Backtrack to previous ' ' (space). */
3119 do_next = 0;
3120 while ((iter > istart) && !do_next) {
3121 iter--;
3122 if (qla2x00_read_flash_byte(ha, iter) == ' ')
3123 do_next++;
3124 }
3125 if (!do_next)
3126 break;
3127
3128 /*
3129 * Mark end of version tag, and find previous ' ' (space) or
3130 * string length (recent FCODE images -- major hack ahead!!!).
3131 */
3132 vend = iter - 1;
3133 do_next = 0;
3134 while ((iter > istart) && !do_next) {
3135 iter--;
3136 rbyte = qla2x00_read_flash_byte(ha, iter);
3137 if (rbyte == ' ' || rbyte == 0xd || rbyte == 0x10)
3138 do_next++;
3139 }
3140 if (!do_next)
3141 break;
3142
3143 /* Mark beginning of version tag, and copy data. */
3144 iter++;
3145 if ((vend - iter) &&
3146 ((vend - iter) < sizeof(ha->fcode_revision))) {
3147 vbyte = ha->fcode_revision;
3148 while (iter <= vend) {
3149 *vbyte++ = qla2x00_read_flash_byte(ha, iter);
3150 iter++;
3151 }
3152 ret = QLA_SUCCESS;
3153 }
3154 } while (0);
3155
3156 if (ret != QLA_SUCCESS)
3157 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
3158 }
3159
3160 int
qla2x00_get_flash_version(scsi_qla_host_t * vha,void * mbuf)3161 qla2x00_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
3162 {
3163 int ret = QLA_SUCCESS;
3164 uint8_t code_type, last_image;
3165 uint32_t pcihdr, pcids;
3166 uint8_t *dbyte;
3167 uint16_t *dcode;
3168 struct qla_hw_data *ha = vha->hw;
3169
3170 if (!ha->pio_address || !mbuf)
3171 return QLA_FUNCTION_FAILED;
3172
3173 memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
3174 memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
3175 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
3176 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3177
3178 qla2x00_flash_enable(ha);
3179
3180 /* Begin with first PCI expansion ROM header. */
3181 pcihdr = 0;
3182 last_image = 1;
3183 do {
3184 /* Verify PCI expansion ROM header. */
3185 if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
3186 qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
3187 /* No signature */
3188 ql_log(ql_log_fatal, vha, 0x0050,
3189 "No matching ROM signature.\n");
3190 ret = QLA_FUNCTION_FAILED;
3191 break;
3192 }
3193
3194 /* Locate PCI data structure. */
3195 pcids = pcihdr +
3196 ((qla2x00_read_flash_byte(ha, pcihdr + 0x19) << 8) |
3197 qla2x00_read_flash_byte(ha, pcihdr + 0x18));
3198
3199 /* Validate signature of PCI data structure. */
3200 if (qla2x00_read_flash_byte(ha, pcids) != 'P' ||
3201 qla2x00_read_flash_byte(ha, pcids + 0x1) != 'C' ||
3202 qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
3203 qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
3204 /* Incorrect header. */
3205 ql_log(ql_log_fatal, vha, 0x0051,
3206 "PCI data struct not found pcir_adr=%x.\n", pcids);
3207 ret = QLA_FUNCTION_FAILED;
3208 break;
3209 }
3210
3211 /* Read version */
3212 code_type = qla2x00_read_flash_byte(ha, pcids + 0x14);
3213 switch (code_type) {
3214 case ROM_CODE_TYPE_BIOS:
3215 /* Intel x86, PC-AT compatible. */
3216 ha->bios_revision[0] =
3217 qla2x00_read_flash_byte(ha, pcids + 0x12);
3218 ha->bios_revision[1] =
3219 qla2x00_read_flash_byte(ha, pcids + 0x13);
3220 ql_dbg(ql_dbg_init, vha, 0x0052,
3221 "Read BIOS %d.%d.\n",
3222 ha->bios_revision[1], ha->bios_revision[0]);
3223 break;
3224 case ROM_CODE_TYPE_FCODE:
3225 /* Open Firmware standard for PCI (FCode). */
3226 /* Eeeewww... */
3227 qla2x00_get_fcode_version(ha, pcids);
3228 break;
3229 case ROM_CODE_TYPE_EFI:
3230 /* Extensible Firmware Interface (EFI). */
3231 ha->efi_revision[0] =
3232 qla2x00_read_flash_byte(ha, pcids + 0x12);
3233 ha->efi_revision[1] =
3234 qla2x00_read_flash_byte(ha, pcids + 0x13);
3235 ql_dbg(ql_dbg_init, vha, 0x0053,
3236 "Read EFI %d.%d.\n",
3237 ha->efi_revision[1], ha->efi_revision[0]);
3238 break;
3239 default:
3240 ql_log(ql_log_warn, vha, 0x0054,
3241 "Unrecognized code type %x at pcids %x.\n",
3242 code_type, pcids);
3243 break;
3244 }
3245
3246 last_image = qla2x00_read_flash_byte(ha, pcids + 0x15) & BIT_7;
3247
3248 /* Locate next PCI expansion ROM. */
3249 pcihdr += ((qla2x00_read_flash_byte(ha, pcids + 0x11) << 8) |
3250 qla2x00_read_flash_byte(ha, pcids + 0x10)) * 512;
3251 } while (!last_image);
3252
3253 if (IS_QLA2322(ha)) {
3254 /* Read firmware image information. */
3255 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3256 dbyte = mbuf;
3257 memset(dbyte, 0, 8);
3258 dcode = (uint16_t *)dbyte;
3259
3260 qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10,
3261 8);
3262 ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010a,
3263 "Dumping fw "
3264 "ver from flash:.\n");
3265 ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010b,
3266 dbyte, 32);
3267
3268 if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
3269 dcode[2] == 0xffff && dcode[3] == 0xffff) ||
3270 (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
3271 dcode[3] == 0)) {
3272 ql_log(ql_log_warn, vha, 0x0057,
3273 "Unrecognized fw revision at %x.\n",
3274 ha->flt_region_fw * 4);
3275 } else {
3276 /* values are in big endian */
3277 ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
3278 ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
3279 ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
3280 ql_dbg(ql_dbg_init, vha, 0x0058,
3281 "FW Version: "
3282 "%d.%d.%d.\n", ha->fw_revision[0],
3283 ha->fw_revision[1], ha->fw_revision[2]);
3284 }
3285 }
3286
3287 qla2x00_flash_disable(ha);
3288
3289 return ret;
3290 }
3291
3292 int
qla82xx_get_flash_version(scsi_qla_host_t * vha,void * mbuf)3293 qla82xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
3294 {
3295 int ret = QLA_SUCCESS;
3296 uint32_t pcihdr, pcids;
3297 uint32_t *dcode = mbuf;
3298 uint8_t *bcode = mbuf;
3299 uint8_t code_type, last_image;
3300 struct qla_hw_data *ha = vha->hw;
3301
3302 if (!mbuf)
3303 return QLA_FUNCTION_FAILED;
3304
3305 memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
3306 memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
3307 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
3308 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3309
3310 /* Begin with first PCI expansion ROM header. */
3311 pcihdr = ha->flt_region_boot << 2;
3312 last_image = 1;
3313 do {
3314 /* Verify PCI expansion ROM header. */
3315 ha->isp_ops->read_optrom(vha, dcode, pcihdr, 0x20 * 4);
3316 bcode = mbuf + (pcihdr % 4);
3317 if (memcmp(bcode, "\x55\xaa", 2)) {
3318 /* No signature */
3319 ql_log(ql_log_fatal, vha, 0x0154,
3320 "No matching ROM signature.\n");
3321 ret = QLA_FUNCTION_FAILED;
3322 break;
3323 }
3324
3325 /* Locate PCI data structure. */
3326 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
3327
3328 ha->isp_ops->read_optrom(vha, dcode, pcids, 0x20 * 4);
3329 bcode = mbuf + (pcihdr % 4);
3330
3331 /* Validate signature of PCI data structure. */
3332 if (memcmp(bcode, "PCIR", 4)) {
3333 /* Incorrect header. */
3334 ql_log(ql_log_fatal, vha, 0x0155,
3335 "PCI data struct not found pcir_adr=%x.\n", pcids);
3336 ret = QLA_FUNCTION_FAILED;
3337 break;
3338 }
3339
3340 /* Read version */
3341 code_type = bcode[0x14];
3342 switch (code_type) {
3343 case ROM_CODE_TYPE_BIOS:
3344 /* Intel x86, PC-AT compatible. */
3345 ha->bios_revision[0] = bcode[0x12];
3346 ha->bios_revision[1] = bcode[0x13];
3347 ql_dbg(ql_dbg_init, vha, 0x0156,
3348 "Read BIOS %d.%d.\n",
3349 ha->bios_revision[1], ha->bios_revision[0]);
3350 break;
3351 case ROM_CODE_TYPE_FCODE:
3352 /* Open Firmware standard for PCI (FCode). */
3353 ha->fcode_revision[0] = bcode[0x12];
3354 ha->fcode_revision[1] = bcode[0x13];
3355 ql_dbg(ql_dbg_init, vha, 0x0157,
3356 "Read FCODE %d.%d.\n",
3357 ha->fcode_revision[1], ha->fcode_revision[0]);
3358 break;
3359 case ROM_CODE_TYPE_EFI:
3360 /* Extensible Firmware Interface (EFI). */
3361 ha->efi_revision[0] = bcode[0x12];
3362 ha->efi_revision[1] = bcode[0x13];
3363 ql_dbg(ql_dbg_init, vha, 0x0158,
3364 "Read EFI %d.%d.\n",
3365 ha->efi_revision[1], ha->efi_revision[0]);
3366 break;
3367 default:
3368 ql_log(ql_log_warn, vha, 0x0159,
3369 "Unrecognized code type %x at pcids %x.\n",
3370 code_type, pcids);
3371 break;
3372 }
3373
3374 last_image = bcode[0x15] & BIT_7;
3375
3376 /* Locate next PCI expansion ROM. */
3377 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
3378 } while (!last_image);
3379
3380 /* Read firmware image information. */
3381 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3382 dcode = mbuf;
3383 ha->isp_ops->read_optrom(vha, dcode, ha->flt_region_fw << 2, 0x20);
3384 bcode = mbuf + (pcihdr % 4);
3385
3386 /* Validate signature of PCI data structure. */
3387 if (bcode[0x0] == 0x3 && bcode[0x1] == 0x0 &&
3388 bcode[0x2] == 0x40 && bcode[0x3] == 0x40) {
3389 ha->fw_revision[0] = bcode[0x4];
3390 ha->fw_revision[1] = bcode[0x5];
3391 ha->fw_revision[2] = bcode[0x6];
3392 ql_dbg(ql_dbg_init, vha, 0x0153,
3393 "Firmware revision %d.%d.%d\n",
3394 ha->fw_revision[0], ha->fw_revision[1],
3395 ha->fw_revision[2]);
3396 }
3397
3398 return ret;
3399 }
3400
3401 int
qla24xx_get_flash_version(scsi_qla_host_t * vha,void * mbuf)3402 qla24xx_get_flash_version(scsi_qla_host_t *vha, void *mbuf)
3403 {
3404 int ret = QLA_SUCCESS;
3405 uint32_t pcihdr = 0, pcids = 0;
3406 uint32_t *dcode = mbuf;
3407 uint8_t *bcode = mbuf;
3408 uint8_t code_type, last_image;
3409 int i;
3410 struct qla_hw_data *ha = vha->hw;
3411 uint32_t faddr = 0;
3412 struct active_regions active_regions = { };
3413
3414 if (IS_P3P_TYPE(ha))
3415 return ret;
3416
3417 if (!mbuf)
3418 return QLA_FUNCTION_FAILED;
3419
3420 memset(ha->bios_revision, 0, sizeof(ha->bios_revision));
3421 memset(ha->efi_revision, 0, sizeof(ha->efi_revision));
3422 memset(ha->fcode_revision, 0, sizeof(ha->fcode_revision));
3423 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3424
3425 pcihdr = ha->flt_region_boot << 2;
3426 if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
3427 qla27xx_get_active_image(vha, &active_regions);
3428 if (active_regions.global == QLA27XX_SECONDARY_IMAGE) {
3429 pcihdr = ha->flt_region_boot_sec << 2;
3430 }
3431 }
3432
3433 do {
3434 /* Verify PCI expansion ROM header. */
3435 qla24xx_read_flash_data(vha, dcode, pcihdr >> 2, 0x20);
3436 bcode = mbuf + (pcihdr % 4);
3437 if (memcmp(bcode, "\x55\xaa", 2)) {
3438 /* No signature */
3439 ql_log(ql_log_fatal, vha, 0x0059,
3440 "No matching ROM signature.\n");
3441 ret = QLA_FUNCTION_FAILED;
3442 break;
3443 }
3444
3445 /* Locate PCI data structure. */
3446 pcids = pcihdr + ((bcode[0x19] << 8) | bcode[0x18]);
3447
3448 qla24xx_read_flash_data(vha, dcode, pcids >> 2, 0x20);
3449 bcode = mbuf + (pcihdr % 4);
3450
3451 /* Validate signature of PCI data structure. */
3452 if (memcmp(bcode, "PCIR", 4)) {
3453 /* Incorrect header. */
3454 ql_log(ql_log_fatal, vha, 0x005a,
3455 "PCI data struct not found pcir_adr=%x.\n", pcids);
3456 ql_dump_buffer(ql_dbg_init, vha, 0x0059, dcode, 32);
3457 ret = QLA_FUNCTION_FAILED;
3458 break;
3459 }
3460
3461 /* Read version */
3462 code_type = bcode[0x14];
3463 switch (code_type) {
3464 case ROM_CODE_TYPE_BIOS:
3465 /* Intel x86, PC-AT compatible. */
3466 ha->bios_revision[0] = bcode[0x12];
3467 ha->bios_revision[1] = bcode[0x13];
3468 ql_dbg(ql_dbg_init, vha, 0x005b,
3469 "Read BIOS %d.%d.\n",
3470 ha->bios_revision[1], ha->bios_revision[0]);
3471 break;
3472 case ROM_CODE_TYPE_FCODE:
3473 /* Open Firmware standard for PCI (FCode). */
3474 ha->fcode_revision[0] = bcode[0x12];
3475 ha->fcode_revision[1] = bcode[0x13];
3476 ql_dbg(ql_dbg_init, vha, 0x005c,
3477 "Read FCODE %d.%d.\n",
3478 ha->fcode_revision[1], ha->fcode_revision[0]);
3479 break;
3480 case ROM_CODE_TYPE_EFI:
3481 /* Extensible Firmware Interface (EFI). */
3482 ha->efi_revision[0] = bcode[0x12];
3483 ha->efi_revision[1] = bcode[0x13];
3484 ql_dbg(ql_dbg_init, vha, 0x005d,
3485 "Read EFI %d.%d.\n",
3486 ha->efi_revision[1], ha->efi_revision[0]);
3487 break;
3488 default:
3489 ql_log(ql_log_warn, vha, 0x005e,
3490 "Unrecognized code type %x at pcids %x.\n",
3491 code_type, pcids);
3492 break;
3493 }
3494
3495 last_image = bcode[0x15] & BIT_7;
3496
3497 /* Locate next PCI expansion ROM. */
3498 pcihdr += ((bcode[0x11] << 8) | bcode[0x10]) * 512;
3499 } while (!last_image);
3500
3501 /* Read firmware image information. */
3502 memset(ha->fw_revision, 0, sizeof(ha->fw_revision));
3503 faddr = ha->flt_region_fw;
3504 if (IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
3505 qla27xx_get_active_image(vha, &active_regions);
3506 if (active_regions.global == QLA27XX_SECONDARY_IMAGE)
3507 faddr = ha->flt_region_fw_sec;
3508 }
3509
3510 qla24xx_read_flash_data(vha, dcode, faddr, 8);
3511 if (qla24xx_risc_firmware_invalid(dcode)) {
3512 ql_log(ql_log_warn, vha, 0x005f,
3513 "Unrecognized fw revision at %x.\n",
3514 ha->flt_region_fw * 4);
3515 ql_dump_buffer(ql_dbg_init, vha, 0x005f, dcode, 32);
3516 } else {
3517 for (i = 0; i < 4; i++)
3518 ha->fw_revision[i] =
3519 be32_to_cpu((__force __be32)dcode[4+i]);
3520 ql_dbg(ql_dbg_init, vha, 0x0060,
3521 "Firmware revision (flash) %u.%u.%u (%x).\n",
3522 ha->fw_revision[0], ha->fw_revision[1],
3523 ha->fw_revision[2], ha->fw_revision[3]);
3524 }
3525
3526 /* Check for golden firmware and get version if available */
3527 if (!IS_QLA81XX(ha)) {
3528 /* Golden firmware is not present in non 81XX adapters */
3529 return ret;
3530 }
3531
3532 memset(ha->gold_fw_version, 0, sizeof(ha->gold_fw_version));
3533 faddr = ha->flt_region_gold_fw;
3534 qla24xx_read_flash_data(vha, dcode, ha->flt_region_gold_fw, 8);
3535 if (qla24xx_risc_firmware_invalid(dcode)) {
3536 ql_log(ql_log_warn, vha, 0x0056,
3537 "Unrecognized golden fw at %#x.\n", faddr);
3538 ql_dump_buffer(ql_dbg_init, vha, 0x0056, dcode, 32);
3539 return ret;
3540 }
3541
3542 for (i = 0; i < 4; i++)
3543 ha->gold_fw_version[i] =
3544 be32_to_cpu((__force __be32)dcode[4+i]);
3545
3546 return ret;
3547 }
3548
3549 static int
qla2xxx_is_vpd_valid(uint8_t * pos,uint8_t * end)3550 qla2xxx_is_vpd_valid(uint8_t *pos, uint8_t *end)
3551 {
3552 if (pos >= end || *pos != 0x82)
3553 return 0;
3554
3555 pos += 3 + pos[1];
3556 if (pos >= end || *pos != 0x90)
3557 return 0;
3558
3559 pos += 3 + pos[1];
3560 if (pos >= end || *pos != 0x78)
3561 return 0;
3562
3563 return 1;
3564 }
3565
3566 int
qla2xxx_get_vpd_field(scsi_qla_host_t * vha,char * key,char * str,size_t size)3567 qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size)
3568 {
3569 struct qla_hw_data *ha = vha->hw;
3570 uint8_t *pos = ha->vpd;
3571 uint8_t *end = pos + ha->vpd_size;
3572 int len = 0;
3573
3574 if (!IS_FWI2_CAPABLE(ha) || !qla2xxx_is_vpd_valid(pos, end))
3575 return 0;
3576
3577 while (pos < end && *pos != 0x78) {
3578 len = (*pos == 0x82) ? pos[1] : pos[2];
3579
3580 if (!strncmp(pos, key, strlen(key)))
3581 break;
3582
3583 if (*pos != 0x90 && *pos != 0x91)
3584 pos += len;
3585
3586 pos += 3;
3587 }
3588
3589 if (pos < end - len && *pos != 0x78)
3590 return scnprintf(str, size, "%.*s", len, pos + 3);
3591
3592 return 0;
3593 }
3594
3595 int
qla24xx_read_fcp_prio_cfg(scsi_qla_host_t * vha)3596 qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
3597 {
3598 int len, max_len;
3599 uint32_t fcp_prio_addr;
3600 struct qla_hw_data *ha = vha->hw;
3601
3602 if (!ha->fcp_prio_cfg) {
3603 ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
3604 if (!ha->fcp_prio_cfg) {
3605 ql_log(ql_log_warn, vha, 0x00d5,
3606 "Unable to allocate memory for fcp priority data (%x).\n",
3607 FCP_PRIO_CFG_SIZE);
3608 return QLA_FUNCTION_FAILED;
3609 }
3610 }
3611 memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
3612
3613 fcp_prio_addr = ha->flt_region_fcp_prio;
3614
3615 /* first read the fcp priority data header from flash */
3616 ha->isp_ops->read_optrom(vha, ha->fcp_prio_cfg,
3617 fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
3618
3619 if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 0))
3620 goto fail;
3621
3622 /* read remaining FCP CMD config data from flash */
3623 fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
3624 len = ha->fcp_prio_cfg->num_entries * sizeof(struct qla_fcp_prio_entry);
3625 max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
3626
3627 ha->isp_ops->read_optrom(vha, &ha->fcp_prio_cfg->entry[0],
3628 fcp_prio_addr << 2, (len < max_len ? len : max_len));
3629
3630 /* revalidate the entire FCP priority config data, including entries */
3631 if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 1))
3632 goto fail;
3633
3634 ha->flags.fcp_prio_enabled = 1;
3635 return QLA_SUCCESS;
3636 fail:
3637 vfree(ha->fcp_prio_cfg);
3638 ha->fcp_prio_cfg = NULL;
3639 return QLA_FUNCTION_FAILED;
3640 }
3641