1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * phy-ti-pipe3 - PIPE3 PHY driver.
4 *
5 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
6 * Author: Kishon Vijay Abraham I <kishon@ti.com>
7 */
8
9 #include <linux/module.h>
10 #include <linux/platform_device.h>
11 #include <linux/slab.h>
12 #include <linux/phy/phy.h>
13 #include <linux/of.h>
14 #include <linux/clk.h>
15 #include <linux/err.h>
16 #include <linux/io.h>
17 #include <linux/pm_runtime.h>
18 #include <linux/delay.h>
19 #include <linux/phy/omap_control_phy.h>
20 #include <linux/of_platform.h>
21 #include <linux/mfd/syscon.h>
22 #include <linux/regmap.h>
23
24 #define PLL_STATUS 0x00000004
25 #define PLL_GO 0x00000008
26 #define PLL_CONFIGURATION1 0x0000000C
27 #define PLL_CONFIGURATION2 0x00000010
28 #define PLL_CONFIGURATION3 0x00000014
29 #define PLL_CONFIGURATION4 0x00000020
30
31 #define PLL_REGM_MASK 0x001FFE00
32 #define PLL_REGM_SHIFT 0x9
33 #define PLL_REGM_F_MASK 0x0003FFFF
34 #define PLL_REGM_F_SHIFT 0x0
35 #define PLL_REGN_MASK 0x000001FE
36 #define PLL_REGN_SHIFT 0x1
37 #define PLL_SELFREQDCO_MASK 0x0000000E
38 #define PLL_SELFREQDCO_SHIFT 0x1
39 #define PLL_SD_MASK 0x0003FC00
40 #define PLL_SD_SHIFT 10
41 #define SET_PLL_GO 0x1
42 #define PLL_LDOPWDN BIT(15)
43 #define PLL_TICOPWDN BIT(16)
44 #define PLL_LOCK 0x2
45 #define PLL_IDLE 0x1
46
47 #define SATA_PLL_SOFT_RESET BIT(18)
48
49 #define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14)
50 #define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14
51
52 #define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22)
53 #define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22
54
55 #define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
56 #define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
57
58 #define PCIE_PCS_MASK 0xFF0000
59 #define PCIE_PCS_DELAY_COUNT_SHIFT 0x10
60
61 #define PIPE3_PHY_RX_ANA_PROGRAMMABILITY 0x0000000C
62 #define INTERFACE_MASK GENMASK(31, 27)
63 #define INTERFACE_SHIFT 27
64 #define INTERFACE_MODE_USBSS BIT(4)
65 #define INTERFACE_MODE_SATA_1P5 BIT(3)
66 #define INTERFACE_MODE_SATA_3P0 BIT(2)
67 #define INTERFACE_MODE_PCIE BIT(0)
68
69 #define LOSD_MASK GENMASK(17, 14)
70 #define LOSD_SHIFT 14
71 #define MEM_PLLDIV GENMASK(6, 5)
72
73 #define PIPE3_PHY_RX_TRIM 0x0000001C
74 #define MEM_DLL_TRIM_SEL_MASK GENMASK(31, 30)
75 #define MEM_DLL_TRIM_SHIFT 30
76
77 #define PIPE3_PHY_RX_DLL 0x00000024
78 #define MEM_DLL_PHINT_RATE_MASK GENMASK(31, 30)
79 #define MEM_DLL_PHINT_RATE_SHIFT 30
80
81 #define PIPE3_PHY_RX_DIGITAL_MODES 0x00000028
82 #define MEM_HS_RATE_MASK GENMASK(28, 27)
83 #define MEM_HS_RATE_SHIFT 27
84 #define MEM_OVRD_HS_RATE BIT(26)
85 #define MEM_OVRD_HS_RATE_SHIFT 26
86 #define MEM_CDR_FASTLOCK BIT(23)
87 #define MEM_CDR_FASTLOCK_SHIFT 23
88 #define MEM_CDR_LBW_MASK GENMASK(22, 21)
89 #define MEM_CDR_LBW_SHIFT 21
90 #define MEM_CDR_STEPCNT_MASK GENMASK(20, 19)
91 #define MEM_CDR_STEPCNT_SHIFT 19
92 #define MEM_CDR_STL_MASK GENMASK(18, 16)
93 #define MEM_CDR_STL_SHIFT 16
94 #define MEM_CDR_THR_MASK GENMASK(15, 13)
95 #define MEM_CDR_THR_SHIFT 13
96 #define MEM_CDR_THR_MODE BIT(12)
97 #define MEM_CDR_THR_MODE_SHIFT 12
98 #define MEM_CDR_2NDO_SDM_MODE BIT(11)
99 #define MEM_CDR_2NDO_SDM_MODE_SHIFT 11
100
101 #define PIPE3_PHY_RX_EQUALIZER 0x00000038
102 #define MEM_EQLEV_MASK GENMASK(31, 16)
103 #define MEM_EQLEV_SHIFT 16
104 #define MEM_EQFTC_MASK GENMASK(15, 11)
105 #define MEM_EQFTC_SHIFT 11
106 #define MEM_EQCTL_MASK GENMASK(10, 7)
107 #define MEM_EQCTL_SHIFT 7
108 #define MEM_OVRD_EQLEV BIT(2)
109 #define MEM_OVRD_EQLEV_SHIFT 2
110 #define MEM_OVRD_EQFTC BIT(1)
111 #define MEM_OVRD_EQFTC_SHIFT 1
112
113 #define SATA_PHY_RX_IO_AND_A2D_OVERRIDES 0x44
114 #define MEM_CDR_LOS_SOURCE_MASK GENMASK(10, 9)
115 #define MEM_CDR_LOS_SOURCE_SHIFT 9
116
117 /*
118 * This is an Empirical value that works, need to confirm the actual
119 * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
120 * to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
121 */
122 #define PLL_IDLE_TIME 100 /* in milliseconds */
123 #define PLL_LOCK_TIME 100 /* in milliseconds */
124
125 enum pipe3_mode { PIPE3_MODE_PCIE = 1,
126 PIPE3_MODE_SATA,
127 PIPE3_MODE_USBSS };
128
129 struct pipe3_dpll_params {
130 u16 m;
131 u8 n;
132 u8 freq:3;
133 u8 sd;
134 u32 mf;
135 };
136
137 struct pipe3_dpll_map {
138 unsigned long rate;
139 struct pipe3_dpll_params params;
140 };
141
142 struct pipe3_settings {
143 u8 ana_interface;
144 u8 ana_losd;
145 u8 dig_fastlock;
146 u8 dig_lbw;
147 u8 dig_stepcnt;
148 u8 dig_stl;
149 u8 dig_thr;
150 u8 dig_thr_mode;
151 u8 dig_2ndo_sdm_mode;
152 u8 dig_hs_rate;
153 u8 dig_ovrd_hs_rate;
154 u8 dll_trim_sel;
155 u8 dll_phint_rate;
156 u8 eq_lev;
157 u8 eq_ftc;
158 u8 eq_ctl;
159 u8 eq_ovrd_lev;
160 u8 eq_ovrd_ftc;
161 };
162
163 struct ti_pipe3 {
164 void __iomem *pll_ctrl_base;
165 void __iomem *phy_rx;
166 void __iomem *phy_tx;
167 struct device *dev;
168 struct device *control_dev;
169 struct clk *wkupclk;
170 struct clk *sys_clk;
171 struct clk *refclk;
172 struct clk *div_clk;
173 struct pipe3_dpll_map *dpll_map;
174 struct regmap *phy_power_syscon; /* ctrl. reg. acces */
175 struct regmap *pcs_syscon; /* ctrl. reg. acces */
176 struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
177 unsigned int dpll_reset_reg; /* reg. index within syscon */
178 unsigned int power_reg; /* power reg. index within syscon */
179 unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
180 bool sata_refclk_enabled;
181 enum pipe3_mode mode;
182 struct pipe3_settings settings;
183 };
184
185 static struct pipe3_dpll_map dpll_map_usb[] = {
186 {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
187 {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
188 {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
189 {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
190 {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
191 {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
192 { }, /* Terminator */
193 };
194
195 static struct pipe3_dpll_map dpll_map_sata[] = {
196 {12000000, {625, 4, 4, 6, 0} }, /* 12 MHz */
197 {16800000, {625, 6, 4, 7, 0} }, /* 16.8 MHz */
198 {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
199 {20000000, {750, 9, 4, 6, 0} }, /* 20 MHz */
200 {26000000, {750, 12, 4, 6, 0} }, /* 26 MHz */
201 {38400000, {625, 15, 4, 6, 0} }, /* 38.4 MHz */
202 { }, /* Terminator */
203 };
204
205 struct pipe3_data {
206 enum pipe3_mode mode;
207 struct pipe3_dpll_map *dpll_map;
208 struct pipe3_settings settings;
209 };
210
211 static struct pipe3_data data_usb = {
212 .mode = PIPE3_MODE_USBSS,
213 .dpll_map = dpll_map_usb,
214 .settings = {
215 /* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */
216 .ana_interface = INTERFACE_MODE_USBSS,
217 .ana_losd = 0xa,
218 .dig_fastlock = 1,
219 .dig_lbw = 3,
220 .dig_stepcnt = 0,
221 .dig_stl = 0x3,
222 .dig_thr = 1,
223 .dig_thr_mode = 1,
224 .dig_2ndo_sdm_mode = 0,
225 .dig_hs_rate = 0,
226 .dig_ovrd_hs_rate = 1,
227 .dll_trim_sel = 0x2,
228 .dll_phint_rate = 0x3,
229 .eq_lev = 0,
230 .eq_ftc = 0,
231 .eq_ctl = 0x9,
232 .eq_ovrd_lev = 0,
233 .eq_ovrd_ftc = 0,
234 },
235 };
236
237 static struct pipe3_data data_sata = {
238 .mode = PIPE3_MODE_SATA,
239 .dpll_map = dpll_map_sata,
240 .settings = {
241 /* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */
242 .ana_interface = INTERFACE_MODE_SATA_3P0,
243 .ana_losd = 0x5,
244 .dig_fastlock = 1,
245 .dig_lbw = 3,
246 .dig_stepcnt = 0,
247 .dig_stl = 0x3,
248 .dig_thr = 1,
249 .dig_thr_mode = 1,
250 .dig_2ndo_sdm_mode = 0,
251 .dig_hs_rate = 0, /* Not in TRM preferred settings */
252 .dig_ovrd_hs_rate = 0, /* Not in TRM preferred settings */
253 .dll_trim_sel = 0x1,
254 .dll_phint_rate = 0x2, /* for 1.5 GHz DPLL clock */
255 .eq_lev = 0,
256 .eq_ftc = 0x1f,
257 .eq_ctl = 0,
258 .eq_ovrd_lev = 1,
259 .eq_ovrd_ftc = 1,
260 },
261 };
262
263 static struct pipe3_data data_pcie = {
264 .mode = PIPE3_MODE_PCIE,
265 .settings = {
266 /* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */
267 .ana_interface = INTERFACE_MODE_PCIE,
268 .ana_losd = 0xa,
269 .dig_fastlock = 1,
270 .dig_lbw = 3,
271 .dig_stepcnt = 0,
272 .dig_stl = 0x3,
273 .dig_thr = 1,
274 .dig_thr_mode = 1,
275 .dig_2ndo_sdm_mode = 0,
276 .dig_hs_rate = 0,
277 .dig_ovrd_hs_rate = 0,
278 .dll_trim_sel = 0x2,
279 .dll_phint_rate = 0x3,
280 .eq_lev = 0,
281 .eq_ftc = 0x1f,
282 .eq_ctl = 1,
283 .eq_ovrd_lev = 0,
284 .eq_ovrd_ftc = 0,
285 },
286 };
287
ti_pipe3_readl(void __iomem * addr,unsigned offset)288 static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
289 {
290 return __raw_readl(addr + offset);
291 }
292
ti_pipe3_writel(void __iomem * addr,unsigned offset,u32 data)293 static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
294 u32 data)
295 {
296 __raw_writel(data, addr + offset);
297 }
298
ti_pipe3_get_dpll_params(struct ti_pipe3 * phy)299 static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
300 {
301 unsigned long rate;
302 struct pipe3_dpll_map *dpll_map = phy->dpll_map;
303
304 rate = clk_get_rate(phy->sys_clk);
305
306 for (; dpll_map->rate; dpll_map++) {
307 if (rate == dpll_map->rate)
308 return &dpll_map->params;
309 }
310
311 dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
312
313 return NULL;
314 }
315
316 static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
317 static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
318
ti_pipe3_power_off(struct phy * x)319 static int ti_pipe3_power_off(struct phy *x)
320 {
321 int ret;
322 struct ti_pipe3 *phy = phy_get_drvdata(x);
323
324 if (!phy->phy_power_syscon) {
325 omap_control_phy_power(phy->control_dev, 0);
326 return 0;
327 }
328
329 ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
330 PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0);
331 return ret;
332 }
333
334 static void ti_pipe3_calibrate(struct ti_pipe3 *phy);
335
ti_pipe3_power_on(struct phy * x)336 static int ti_pipe3_power_on(struct phy *x)
337 {
338 u32 val;
339 u32 mask;
340 unsigned long rate;
341 struct ti_pipe3 *phy = phy_get_drvdata(x);
342 bool rx_pending = false;
343
344 if (!phy->phy_power_syscon) {
345 omap_control_phy_power(phy->control_dev, 1);
346 return 0;
347 }
348
349 rate = clk_get_rate(phy->sys_clk);
350 if (!rate) {
351 dev_err(phy->dev, "Invalid clock rate\n");
352 return -EINVAL;
353 }
354 rate = rate / 1000000;
355 mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
356 val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
357 regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
358 mask, val);
359 /*
360 * For PCIe, TX and RX must be powered on simultaneously.
361 * For USB and SATA, TX must be powered on before RX
362 */
363 mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
364 if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) {
365 val = PIPE3_PHY_TX_POWERON;
366 rx_pending = true;
367 } else {
368 val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
369 }
370
371 regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
372 mask, val);
373
374 if (rx_pending) {
375 val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
376 regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
377 mask, val);
378 }
379
380 if (phy->mode == PIPE3_MODE_PCIE)
381 ti_pipe3_calibrate(phy);
382
383 return 0;
384 }
385
ti_pipe3_dpll_wait_lock(struct ti_pipe3 * phy)386 static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
387 {
388 u32 val;
389 unsigned long timeout;
390
391 timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
392 do {
393 cpu_relax();
394 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
395 if (val & PLL_LOCK)
396 return 0;
397 } while (!time_after(jiffies, timeout));
398
399 dev_err(phy->dev, "DPLL failed to lock\n");
400 return -EBUSY;
401 }
402
ti_pipe3_dpll_program(struct ti_pipe3 * phy)403 static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
404 {
405 u32 val;
406 struct pipe3_dpll_params *dpll_params;
407
408 dpll_params = ti_pipe3_get_dpll_params(phy);
409 if (!dpll_params)
410 return -EINVAL;
411
412 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
413 val &= ~PLL_REGN_MASK;
414 val |= dpll_params->n << PLL_REGN_SHIFT;
415 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
416
417 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
418 val &= ~PLL_SELFREQDCO_MASK;
419 val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
420 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
421
422 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
423 val &= ~PLL_REGM_MASK;
424 val |= dpll_params->m << PLL_REGM_SHIFT;
425 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
426
427 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
428 val &= ~PLL_REGM_F_MASK;
429 val |= dpll_params->mf << PLL_REGM_F_SHIFT;
430 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
431
432 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
433 val &= ~PLL_SD_MASK;
434 val |= dpll_params->sd << PLL_SD_SHIFT;
435 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
436
437 ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
438
439 return ti_pipe3_dpll_wait_lock(phy);
440 }
441
ti_pipe3_calibrate(struct ti_pipe3 * phy)442 static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
443 {
444 u32 val;
445 struct pipe3_settings *s = &phy->settings;
446
447 val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY);
448 val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
449 val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT);
450 ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val);
451
452 val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES);
453 val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK |
454 MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK |
455 MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE);
456 val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT |
457 s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT |
458 s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT |
459 s->dig_lbw << MEM_CDR_LBW_SHIFT |
460 s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT |
461 s->dig_stl << MEM_CDR_STL_SHIFT |
462 s->dig_thr << MEM_CDR_THR_SHIFT |
463 s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT |
464 s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT;
465 ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val);
466
467 val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM);
468 val &= ~MEM_DLL_TRIM_SEL_MASK;
469 val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT;
470 ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val);
471
472 val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL);
473 val &= ~MEM_DLL_PHINT_RATE_MASK;
474 val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT;
475 ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val);
476
477 val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER);
478 val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK |
479 MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
480 val |= s->eq_lev << MEM_EQLEV_SHIFT |
481 s->eq_ftc << MEM_EQFTC_SHIFT |
482 s->eq_ctl << MEM_EQCTL_SHIFT |
483 s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT |
484 s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT;
485 ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val);
486
487 if (phy->mode == PIPE3_MODE_SATA) {
488 val = ti_pipe3_readl(phy->phy_rx,
489 SATA_PHY_RX_IO_AND_A2D_OVERRIDES);
490 val &= ~MEM_CDR_LOS_SOURCE_MASK;
491 ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES,
492 val);
493 }
494 }
495
ti_pipe3_init(struct phy * x)496 static int ti_pipe3_init(struct phy *x)
497 {
498 struct ti_pipe3 *phy = phy_get_drvdata(x);
499 u32 val;
500 int ret = 0;
501
502 ti_pipe3_enable_clocks(phy);
503 /*
504 * Set pcie_pcs register to 0x96 for proper functioning of phy
505 * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
506 * 18-1804.
507 */
508 if (phy->mode == PIPE3_MODE_PCIE) {
509 if (!phy->pcs_syscon) {
510 omap_control_pcie_pcs(phy->control_dev, 0x96);
511 return 0;
512 }
513
514 val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
515 ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
516 PCIE_PCS_MASK, val);
517 return ret;
518 }
519
520 /* Bring it out of IDLE if it is IDLE */
521 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
522 if (val & PLL_IDLE) {
523 val &= ~PLL_IDLE;
524 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
525 ret = ti_pipe3_dpll_wait_lock(phy);
526 }
527
528 /* SATA has issues if re-programmed when locked */
529 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
530 if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA)
531 return ret;
532
533 /* Program the DPLL */
534 ret = ti_pipe3_dpll_program(phy);
535 if (ret) {
536 ti_pipe3_disable_clocks(phy);
537 return -EINVAL;
538 }
539
540 ti_pipe3_calibrate(phy);
541
542 return ret;
543 }
544
ti_pipe3_exit(struct phy * x)545 static int ti_pipe3_exit(struct phy *x)
546 {
547 struct ti_pipe3 *phy = phy_get_drvdata(x);
548 u32 val;
549 unsigned long timeout;
550
551 /* If dpll_reset_syscon is not present we wont power down SATA DPLL
552 * due to Errata i783
553 */
554 if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon)
555 return 0;
556
557 /* PCIe doesn't have internal DPLL */
558 if (phy->mode != PIPE3_MODE_PCIE) {
559 /* Put DPLL in IDLE mode */
560 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
561 val |= PLL_IDLE;
562 ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
563
564 /* wait for LDO and Oscillator to power down */
565 timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
566 do {
567 cpu_relax();
568 val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
569 if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
570 break;
571 } while (!time_after(jiffies, timeout));
572
573 if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
574 dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
575 val);
576 return -EBUSY;
577 }
578 }
579
580 /* i783: SATA needs control bit toggle after PLL unlock */
581 if (phy->mode == PIPE3_MODE_SATA) {
582 regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
583 SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
584 regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
585 SATA_PLL_SOFT_RESET, 0);
586 }
587
588 ti_pipe3_disable_clocks(phy);
589
590 return 0;
591 }
592 static const struct phy_ops ops = {
593 .init = ti_pipe3_init,
594 .exit = ti_pipe3_exit,
595 .power_on = ti_pipe3_power_on,
596 .power_off = ti_pipe3_power_off,
597 .owner = THIS_MODULE,
598 };
599
600 static const struct of_device_id ti_pipe3_id_table[];
601
ti_pipe3_get_clk(struct ti_pipe3 * phy)602 static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
603 {
604 struct clk *clk;
605 struct device *dev = phy->dev;
606
607 phy->refclk = devm_clk_get(dev, "refclk");
608 if (IS_ERR(phy->refclk)) {
609 dev_err(dev, "unable to get refclk\n");
610 /* older DTBs have missing refclk in SATA PHY
611 * so don't bail out in case of SATA PHY.
612 */
613 if (phy->mode != PIPE3_MODE_SATA)
614 return PTR_ERR(phy->refclk);
615 }
616
617 if (phy->mode != PIPE3_MODE_SATA) {
618 phy->wkupclk = devm_clk_get(dev, "wkupclk");
619 if (IS_ERR(phy->wkupclk)) {
620 dev_err(dev, "unable to get wkupclk\n");
621 return PTR_ERR(phy->wkupclk);
622 }
623 } else {
624 phy->wkupclk = ERR_PTR(-ENODEV);
625 }
626
627 if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) {
628 phy->sys_clk = devm_clk_get(dev, "sysclk");
629 if (IS_ERR(phy->sys_clk)) {
630 dev_err(dev, "unable to get sysclk\n");
631 return -EINVAL;
632 }
633 }
634
635 if (phy->mode == PIPE3_MODE_PCIE) {
636 clk = devm_clk_get(dev, "dpll_ref");
637 if (IS_ERR(clk)) {
638 dev_err(dev, "unable to get dpll ref clk\n");
639 return PTR_ERR(clk);
640 }
641 clk_set_rate(clk, 1500000000);
642
643 clk = devm_clk_get(dev, "dpll_ref_m2");
644 if (IS_ERR(clk)) {
645 dev_err(dev, "unable to get dpll ref m2 clk\n");
646 return PTR_ERR(clk);
647 }
648 clk_set_rate(clk, 100000000);
649
650 clk = devm_clk_get(dev, "phy-div");
651 if (IS_ERR(clk)) {
652 dev_err(dev, "unable to get phy-div clk\n");
653 return PTR_ERR(clk);
654 }
655 clk_set_rate(clk, 100000000);
656
657 phy->div_clk = devm_clk_get(dev, "div-clk");
658 if (IS_ERR(phy->div_clk)) {
659 dev_err(dev, "unable to get div-clk\n");
660 return PTR_ERR(phy->div_clk);
661 }
662 } else {
663 phy->div_clk = ERR_PTR(-ENODEV);
664 }
665
666 return 0;
667 }
668
ti_pipe3_get_sysctrl(struct ti_pipe3 * phy)669 static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
670 {
671 struct device *dev = phy->dev;
672 struct device_node *node = dev->of_node;
673 struct device_node *control_node;
674 struct platform_device *control_pdev;
675
676 phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node,
677 "syscon-phy-power");
678 if (IS_ERR(phy->phy_power_syscon)) {
679 dev_dbg(dev,
680 "can't get syscon-phy-power, using control device\n");
681 phy->phy_power_syscon = NULL;
682 } else {
683 if (of_property_read_u32_index(node,
684 "syscon-phy-power", 1,
685 &phy->power_reg)) {
686 dev_err(dev, "couldn't get power reg. offset\n");
687 return -EINVAL;
688 }
689 }
690
691 if (!phy->phy_power_syscon) {
692 control_node = of_parse_phandle(node, "ctrl-module", 0);
693 if (!control_node) {
694 dev_err(dev, "Failed to get control device phandle\n");
695 return -EINVAL;
696 }
697
698 control_pdev = of_find_device_by_node(control_node);
699 of_node_put(control_node);
700 if (!control_pdev) {
701 dev_err(dev, "Failed to get control device\n");
702 return -EINVAL;
703 }
704
705 phy->control_dev = &control_pdev->dev;
706 }
707
708 if (phy->mode == PIPE3_MODE_PCIE) {
709 phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
710 "syscon-pcs");
711 if (IS_ERR(phy->pcs_syscon)) {
712 dev_dbg(dev,
713 "can't get syscon-pcs, using omap control\n");
714 phy->pcs_syscon = NULL;
715 } else {
716 if (of_property_read_u32_index(node,
717 "syscon-pcs", 1,
718 &phy->pcie_pcs_reg)) {
719 dev_err(dev,
720 "couldn't get pcie pcs reg. offset\n");
721 return -EINVAL;
722 }
723 }
724 }
725
726 if (phy->mode == PIPE3_MODE_SATA) {
727 phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
728 "syscon-pllreset");
729 if (IS_ERR(phy->dpll_reset_syscon)) {
730 dev_info(dev,
731 "can't get syscon-pllreset, sata dpll won't idle\n");
732 phy->dpll_reset_syscon = NULL;
733 } else {
734 if (of_property_read_u32_index(node,
735 "syscon-pllreset", 1,
736 &phy->dpll_reset_reg)) {
737 dev_err(dev,
738 "couldn't get pllreset reg. offset\n");
739 return -EINVAL;
740 }
741 }
742 }
743
744 return 0;
745 }
746
ti_pipe3_get_tx_rx_base(struct ti_pipe3 * phy)747 static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
748 {
749 struct device *dev = phy->dev;
750 struct platform_device *pdev = to_platform_device(dev);
751
752 phy->phy_rx = devm_platform_ioremap_resource_byname(pdev, "phy_rx");
753 if (IS_ERR(phy->phy_rx))
754 return PTR_ERR(phy->phy_rx);
755
756 phy->phy_tx = devm_platform_ioremap_resource_byname(pdev, "phy_tx");
757
758 return PTR_ERR_OR_ZERO(phy->phy_tx);
759 }
760
ti_pipe3_get_pll_base(struct ti_pipe3 * phy)761 static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
762 {
763 struct device *dev = phy->dev;
764 struct platform_device *pdev = to_platform_device(dev);
765
766 if (phy->mode == PIPE3_MODE_PCIE)
767 return 0;
768
769 phy->pll_ctrl_base =
770 devm_platform_ioremap_resource_byname(pdev, "pll_ctrl");
771 return PTR_ERR_OR_ZERO(phy->pll_ctrl_base);
772 }
773
ti_pipe3_probe(struct platform_device * pdev)774 static int ti_pipe3_probe(struct platform_device *pdev)
775 {
776 struct ti_pipe3 *phy;
777 struct phy *generic_phy;
778 struct phy_provider *phy_provider;
779 struct device *dev = &pdev->dev;
780 int ret;
781 const struct of_device_id *match;
782 struct pipe3_data *data;
783
784 phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
785 if (!phy)
786 return -ENOMEM;
787
788 match = of_match_device(ti_pipe3_id_table, dev);
789 if (!match)
790 return -EINVAL;
791
792 data = (struct pipe3_data *)match->data;
793 if (!data) {
794 dev_err(dev, "no driver data\n");
795 return -EINVAL;
796 }
797
798 phy->dev = dev;
799 phy->mode = data->mode;
800 phy->dpll_map = data->dpll_map;
801 phy->settings = data->settings;
802
803 ret = ti_pipe3_get_pll_base(phy);
804 if (ret)
805 return ret;
806
807 ret = ti_pipe3_get_tx_rx_base(phy);
808 if (ret)
809 return ret;
810
811 ret = ti_pipe3_get_sysctrl(phy);
812 if (ret)
813 return ret;
814
815 ret = ti_pipe3_get_clk(phy);
816 if (ret)
817 return ret;
818
819 platform_set_drvdata(pdev, phy);
820 pm_runtime_enable(dev);
821
822 /*
823 * Prevent auto-disable of refclk for SATA PHY due to Errata i783
824 */
825 if (phy->mode == PIPE3_MODE_SATA) {
826 if (!IS_ERR(phy->refclk)) {
827 clk_prepare_enable(phy->refclk);
828 phy->sata_refclk_enabled = true;
829 }
830 }
831
832 generic_phy = devm_phy_create(dev, NULL, &ops);
833 if (IS_ERR(generic_phy))
834 return PTR_ERR(generic_phy);
835
836 phy_set_drvdata(generic_phy, phy);
837
838 ti_pipe3_power_off(generic_phy);
839
840 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
841 return PTR_ERR_OR_ZERO(phy_provider);
842 }
843
ti_pipe3_remove(struct platform_device * pdev)844 static int ti_pipe3_remove(struct platform_device *pdev)
845 {
846 struct ti_pipe3 *phy = platform_get_drvdata(pdev);
847
848 if (phy->mode == PIPE3_MODE_SATA) {
849 clk_disable_unprepare(phy->refclk);
850 phy->sata_refclk_enabled = false;
851 }
852 pm_runtime_disable(&pdev->dev);
853
854 return 0;
855 }
856
ti_pipe3_enable_clocks(struct ti_pipe3 * phy)857 static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
858 {
859 int ret = 0;
860
861 if (!IS_ERR(phy->refclk)) {
862 ret = clk_prepare_enable(phy->refclk);
863 if (ret) {
864 dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
865 return ret;
866 }
867 }
868
869 if (!IS_ERR(phy->wkupclk)) {
870 ret = clk_prepare_enable(phy->wkupclk);
871 if (ret) {
872 dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
873 goto disable_refclk;
874 }
875 }
876
877 if (!IS_ERR(phy->div_clk)) {
878 ret = clk_prepare_enable(phy->div_clk);
879 if (ret) {
880 dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
881 goto disable_wkupclk;
882 }
883 }
884
885 return 0;
886
887 disable_wkupclk:
888 if (!IS_ERR(phy->wkupclk))
889 clk_disable_unprepare(phy->wkupclk);
890
891 disable_refclk:
892 if (!IS_ERR(phy->refclk))
893 clk_disable_unprepare(phy->refclk);
894
895 return ret;
896 }
897
ti_pipe3_disable_clocks(struct ti_pipe3 * phy)898 static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
899 {
900 if (!IS_ERR(phy->wkupclk))
901 clk_disable_unprepare(phy->wkupclk);
902 if (!IS_ERR(phy->refclk))
903 clk_disable_unprepare(phy->refclk);
904 if (!IS_ERR(phy->div_clk))
905 clk_disable_unprepare(phy->div_clk);
906 }
907
908 static const struct of_device_id ti_pipe3_id_table[] = {
909 {
910 .compatible = "ti,phy-usb3",
911 .data = &data_usb,
912 },
913 {
914 .compatible = "ti,omap-usb3",
915 .data = &data_usb,
916 },
917 {
918 .compatible = "ti,phy-pipe3-sata",
919 .data = &data_sata,
920 },
921 {
922 .compatible = "ti,phy-pipe3-pcie",
923 .data = &data_pcie,
924 },
925 {}
926 };
927 MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
928
929 static struct platform_driver ti_pipe3_driver = {
930 .probe = ti_pipe3_probe,
931 .remove = ti_pipe3_remove,
932 .driver = {
933 .name = "ti-pipe3",
934 .of_match_table = ti_pipe3_id_table,
935 },
936 };
937
938 module_platform_driver(ti_pipe3_driver);
939
940 MODULE_ALIAS("platform:ti_pipe3");
941 MODULE_AUTHOR("Texas Instruments Inc.");
942 MODULE_DESCRIPTION("TI PIPE3 phy driver");
943 MODULE_LICENSE("GPL v2");
944