1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * I2C Link Layer for PN544 HCI based Driver
4 *
5 * Copyright (C) 2012 Intel Corporation. All rights reserved.
6 */
7
8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
9
10 #include <linux/crc-ccitt.h>
11 #include <linux/module.h>
12 #include <linux/i2c.h>
13 #include <linux/acpi.h>
14 #include <linux/interrupt.h>
15 #include <linux/delay.h>
16 #include <linux/nfc.h>
17 #include <linux/firmware.h>
18 #include <linux/gpio/consumer.h>
19
20 #include <asm/unaligned.h>
21
22 #include <net/nfc/hci.h>
23 #include <net/nfc/llc.h>
24 #include <net/nfc/nfc.h>
25
26 #include "pn544.h"
27
28 #define PN544_I2C_FRAME_HEADROOM 1
29 #define PN544_I2C_FRAME_TAILROOM 2
30
31 /* GPIO names */
32 #define PN544_GPIO_NAME_IRQ "pn544_irq"
33 #define PN544_GPIO_NAME_FW "pn544_fw"
34 #define PN544_GPIO_NAME_EN "pn544_en"
35
36 /* framing in HCI mode */
37 #define PN544_HCI_I2C_LLC_LEN 1
38 #define PN544_HCI_I2C_LLC_CRC 2
39 #define PN544_HCI_I2C_LLC_LEN_CRC (PN544_HCI_I2C_LLC_LEN + \
40 PN544_HCI_I2C_LLC_CRC)
41 #define PN544_HCI_I2C_LLC_MIN_SIZE (1 + PN544_HCI_I2C_LLC_LEN_CRC)
42 #define PN544_HCI_I2C_LLC_MAX_PAYLOAD 29
43 #define PN544_HCI_I2C_LLC_MAX_SIZE (PN544_HCI_I2C_LLC_LEN_CRC + 1 + \
44 PN544_HCI_I2C_LLC_MAX_PAYLOAD)
45
46 static const struct i2c_device_id pn544_hci_i2c_id_table[] = {
47 {"pn544", 0},
48 {}
49 };
50
51 MODULE_DEVICE_TABLE(i2c, pn544_hci_i2c_id_table);
52
53 static const struct acpi_device_id pn544_hci_i2c_acpi_match[] __maybe_unused = {
54 {"NXP5440", 0},
55 {}
56 };
57
58 MODULE_DEVICE_TABLE(acpi, pn544_hci_i2c_acpi_match);
59
60 #define PN544_HCI_I2C_DRIVER_NAME "pn544_hci_i2c"
61
62 /*
63 * Exposed through the 4 most significant bytes
64 * from the HCI SW_VERSION first byte, a.k.a.
65 * SW RomLib.
66 */
67 #define PN544_HW_VARIANT_C2 0xa
68 #define PN544_HW_VARIANT_C3 0xb
69
70 #define PN544_FW_CMD_RESET 0x01
71 #define PN544_FW_CMD_WRITE 0x08
72 #define PN544_FW_CMD_CHECK 0x06
73 #define PN544_FW_CMD_SECURE_WRITE 0x0C
74 #define PN544_FW_CMD_SECURE_CHUNK_WRITE 0x0D
75
76 struct pn544_i2c_fw_frame_write {
77 u8 cmd;
78 u16 be_length;
79 u8 be_dest_addr[3];
80 u16 be_datalen;
81 u8 data[];
82 } __packed;
83
84 struct pn544_i2c_fw_frame_check {
85 u8 cmd;
86 u16 be_length;
87 u8 be_start_addr[3];
88 u16 be_datalen;
89 u16 be_crc;
90 } __packed;
91
92 struct pn544_i2c_fw_frame_response {
93 u8 status;
94 u16 be_length;
95 } __packed;
96
97 struct pn544_i2c_fw_blob {
98 u32 be_size;
99 u32 be_destaddr;
100 u8 data[];
101 };
102
103 struct pn544_i2c_fw_secure_frame {
104 u8 cmd;
105 u16 be_datalen;
106 u8 data[];
107 } __packed;
108
109 struct pn544_i2c_fw_secure_blob {
110 u64 header;
111 u8 data[];
112 };
113
114 #define PN544_FW_CMD_RESULT_TIMEOUT 0x01
115 #define PN544_FW_CMD_RESULT_BAD_CRC 0x02
116 #define PN544_FW_CMD_RESULT_ACCESS_DENIED 0x08
117 #define PN544_FW_CMD_RESULT_PROTOCOL_ERROR 0x0B
118 #define PN544_FW_CMD_RESULT_INVALID_PARAMETER 0x11
119 #define PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND 0x13
120 #define PN544_FW_CMD_RESULT_INVALID_LENGTH 0x18
121 #define PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR 0x19
122 #define PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR 0x1D
123 #define PN544_FW_CMD_RESULT_MEMORY_ERROR 0x20
124 #define PN544_FW_CMD_RESULT_CHUNK_OK 0x21
125 #define PN544_FW_CMD_RESULT_WRITE_FAILED 0x74
126 #define PN544_FW_CMD_RESULT_COMMAND_REJECTED 0xE0
127 #define PN544_FW_CMD_RESULT_CHUNK_ERROR 0xE6
128
129 #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
130
131 #define PN544_FW_WRITE_BUFFER_MAX_LEN 0x9f7
132 #define PN544_FW_I2C_MAX_PAYLOAD PN544_HCI_I2C_LLC_MAX_SIZE
133 #define PN544_FW_I2C_WRITE_FRAME_HEADER_LEN 8
134 #define PN544_FW_I2C_WRITE_DATA_MAX_LEN MIN((PN544_FW_I2C_MAX_PAYLOAD -\
135 PN544_FW_I2C_WRITE_FRAME_HEADER_LEN),\
136 PN544_FW_WRITE_BUFFER_MAX_LEN)
137 #define PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN 3
138 #define PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN (PN544_FW_I2C_MAX_PAYLOAD -\
139 PN544_FW_SECURE_CHUNK_WRITE_HEADER_LEN)
140 #define PN544_FW_SECURE_FRAME_HEADER_LEN 3
141 #define PN544_FW_SECURE_BLOB_HEADER_LEN 8
142
143 #define FW_WORK_STATE_IDLE 1
144 #define FW_WORK_STATE_START 2
145 #define FW_WORK_STATE_WAIT_WRITE_ANSWER 3
146 #define FW_WORK_STATE_WAIT_CHECK_ANSWER 4
147 #define FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER 5
148
149 struct pn544_i2c_phy {
150 struct i2c_client *i2c_dev;
151 struct nfc_hci_dev *hdev;
152
153 struct gpio_desc *gpiod_en;
154 struct gpio_desc *gpiod_fw;
155
156 unsigned int en_polarity;
157
158 u8 hw_variant;
159
160 struct work_struct fw_work;
161 int fw_work_state;
162 char firmware_name[NFC_FIRMWARE_NAME_MAXSIZE + 1];
163 const struct firmware *fw;
164 u32 fw_blob_dest_addr;
165 size_t fw_blob_size;
166 const u8 *fw_blob_data;
167 size_t fw_written;
168 size_t fw_size;
169
170 int fw_cmd_result;
171
172 int powered;
173 int run_mode;
174
175 int hard_fault; /*
176 * < 0 if hardware error occured (e.g. i2c err)
177 * and prevents normal operation.
178 */
179 };
180
181 #define I2C_DUMP_SKB(info, skb) \
182 do { \
183 pr_debug("%s:\n", info); \
184 print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \
185 16, 1, (skb)->data, (skb)->len, 0); \
186 } while (0)
187
pn544_hci_i2c_platform_init(struct pn544_i2c_phy * phy)188 static void pn544_hci_i2c_platform_init(struct pn544_i2c_phy *phy)
189 {
190 int polarity, retry, ret;
191 static const char rset_cmd[] = { 0x05, 0xF9, 0x04, 0x00, 0xC3, 0xE5 };
192 int count = sizeof(rset_cmd);
193
194 nfc_info(&phy->i2c_dev->dev, "Detecting nfc_en polarity\n");
195
196 /* Disable fw download */
197 gpiod_set_value_cansleep(phy->gpiod_fw, 0);
198
199 for (polarity = 0; polarity < 2; polarity++) {
200 phy->en_polarity = polarity;
201 retry = 3;
202 while (retry--) {
203 /* power off */
204 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
205 usleep_range(10000, 15000);
206
207 /* power on */
208 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
209 usleep_range(10000, 15000);
210
211 /* send reset */
212 dev_dbg(&phy->i2c_dev->dev, "Sending reset cmd\n");
213 ret = i2c_master_send(phy->i2c_dev, rset_cmd, count);
214 if (ret == count) {
215 nfc_info(&phy->i2c_dev->dev,
216 "nfc_en polarity : active %s\n",
217 (polarity == 0 ? "low" : "high"));
218 goto out;
219 }
220 }
221 }
222
223 nfc_err(&phy->i2c_dev->dev,
224 "Could not detect nfc_en polarity, fallback to active high\n");
225
226 out:
227 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
228 usleep_range(10000, 15000);
229 }
230
pn544_hci_i2c_enable_mode(struct pn544_i2c_phy * phy,int run_mode)231 static void pn544_hci_i2c_enable_mode(struct pn544_i2c_phy *phy, int run_mode)
232 {
233 gpiod_set_value_cansleep(phy->gpiod_fw, run_mode == PN544_FW_MODE ? 1 : 0);
234 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
235 usleep_range(10000, 15000);
236
237 phy->run_mode = run_mode;
238 }
239
pn544_hci_i2c_enable(void * phy_id)240 static int pn544_hci_i2c_enable(void *phy_id)
241 {
242 struct pn544_i2c_phy *phy = phy_id;
243
244 pn544_hci_i2c_enable_mode(phy, PN544_HCI_MODE);
245
246 phy->powered = 1;
247
248 return 0;
249 }
250
pn544_hci_i2c_disable(void * phy_id)251 static void pn544_hci_i2c_disable(void *phy_id)
252 {
253 struct pn544_i2c_phy *phy = phy_id;
254
255 gpiod_set_value_cansleep(phy->gpiod_fw, 0);
256 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
257 usleep_range(10000, 15000);
258
259 gpiod_set_value_cansleep(phy->gpiod_en, phy->en_polarity);
260 usleep_range(10000, 15000);
261
262 gpiod_set_value_cansleep(phy->gpiod_en, !phy->en_polarity);
263 usleep_range(10000, 15000);
264
265 phy->powered = 0;
266 }
267
pn544_hci_i2c_add_len_crc(struct sk_buff * skb)268 static void pn544_hci_i2c_add_len_crc(struct sk_buff *skb)
269 {
270 u16 crc;
271 int len;
272
273 len = skb->len + 2;
274 *(u8 *)skb_push(skb, 1) = len;
275
276 crc = crc_ccitt(0xffff, skb->data, skb->len);
277 crc = ~crc;
278 skb_put_u8(skb, crc & 0xff);
279 skb_put_u8(skb, crc >> 8);
280 }
281
pn544_hci_i2c_remove_len_crc(struct sk_buff * skb)282 static void pn544_hci_i2c_remove_len_crc(struct sk_buff *skb)
283 {
284 skb_pull(skb, PN544_I2C_FRAME_HEADROOM);
285 skb_trim(skb, PN544_I2C_FRAME_TAILROOM);
286 }
287
288 /*
289 * Writing a frame must not return the number of written bytes.
290 * It must return either zero for success, or <0 for error.
291 * In addition, it must not alter the skb
292 */
pn544_hci_i2c_write(void * phy_id,struct sk_buff * skb)293 static int pn544_hci_i2c_write(void *phy_id, struct sk_buff *skb)
294 {
295 int r;
296 struct pn544_i2c_phy *phy = phy_id;
297 struct i2c_client *client = phy->i2c_dev;
298
299 if (phy->hard_fault != 0)
300 return phy->hard_fault;
301
302 usleep_range(3000, 6000);
303
304 pn544_hci_i2c_add_len_crc(skb);
305
306 I2C_DUMP_SKB("i2c frame written", skb);
307
308 r = i2c_master_send(client, skb->data, skb->len);
309
310 if (r == -EREMOTEIO) { /* Retry, chip was in standby */
311 usleep_range(6000, 10000);
312 r = i2c_master_send(client, skb->data, skb->len);
313 }
314
315 if (r >= 0) {
316 if (r != skb->len)
317 r = -EREMOTEIO;
318 else
319 r = 0;
320 }
321
322 pn544_hci_i2c_remove_len_crc(skb);
323
324 return r;
325 }
326
check_crc(u8 * buf,int buflen)327 static int check_crc(u8 *buf, int buflen)
328 {
329 int len;
330 u16 crc;
331
332 len = buf[0] + 1;
333 crc = crc_ccitt(0xffff, buf, len - 2);
334 crc = ~crc;
335
336 if (buf[len - 2] != (crc & 0xff) || buf[len - 1] != (crc >> 8)) {
337 pr_err("CRC error 0x%x != 0x%x 0x%x\n",
338 crc, buf[len - 1], buf[len - 2]);
339 pr_info("%s: BAD CRC\n", __func__);
340 print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
341 16, 2, buf, buflen, false);
342 return -EPERM;
343 }
344 return 0;
345 }
346
347 /*
348 * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
349 * that i2c bus will be flushed and that next read will start on a new frame.
350 * returned skb contains only LLC header and payload.
351 * returns:
352 * -EREMOTEIO : i2c read error (fatal)
353 * -EBADMSG : frame was incorrect and discarded
354 * -ENOMEM : cannot allocate skb, frame dropped
355 */
pn544_hci_i2c_read(struct pn544_i2c_phy * phy,struct sk_buff ** skb)356 static int pn544_hci_i2c_read(struct pn544_i2c_phy *phy, struct sk_buff **skb)
357 {
358 int r;
359 u8 len;
360 u8 tmp[PN544_HCI_I2C_LLC_MAX_SIZE - 1];
361 struct i2c_client *client = phy->i2c_dev;
362
363 r = i2c_master_recv(client, &len, 1);
364 if (r != 1) {
365 nfc_err(&client->dev, "cannot read len byte\n");
366 return -EREMOTEIO;
367 }
368
369 if ((len < (PN544_HCI_I2C_LLC_MIN_SIZE - 1)) ||
370 (len > (PN544_HCI_I2C_LLC_MAX_SIZE - 1))) {
371 nfc_err(&client->dev, "invalid len byte\n");
372 r = -EBADMSG;
373 goto flush;
374 }
375
376 *skb = alloc_skb(1 + len, GFP_KERNEL);
377 if (*skb == NULL) {
378 r = -ENOMEM;
379 goto flush;
380 }
381
382 skb_put_u8(*skb, len);
383
384 r = i2c_master_recv(client, skb_put(*skb, len), len);
385 if (r != len) {
386 kfree_skb(*skb);
387 return -EREMOTEIO;
388 }
389
390 I2C_DUMP_SKB("i2c frame read", *skb);
391
392 r = check_crc((*skb)->data, (*skb)->len);
393 if (r != 0) {
394 kfree_skb(*skb);
395 r = -EBADMSG;
396 goto flush;
397 }
398
399 skb_pull(*skb, 1);
400 skb_trim(*skb, (*skb)->len - 2);
401
402 usleep_range(3000, 6000);
403
404 return 0;
405
406 flush:
407 if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
408 r = -EREMOTEIO;
409
410 usleep_range(3000, 6000);
411
412 return r;
413 }
414
pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy * phy)415 static int pn544_hci_i2c_fw_read_status(struct pn544_i2c_phy *phy)
416 {
417 int r;
418 struct pn544_i2c_fw_frame_response response;
419 struct i2c_client *client = phy->i2c_dev;
420
421 r = i2c_master_recv(client, (char *) &response, sizeof(response));
422 if (r != sizeof(response)) {
423 nfc_err(&client->dev, "cannot read fw status\n");
424 return -EIO;
425 }
426
427 usleep_range(3000, 6000);
428
429 switch (response.status) {
430 case 0:
431 return 0;
432 case PN544_FW_CMD_RESULT_CHUNK_OK:
433 return response.status;
434 case PN544_FW_CMD_RESULT_TIMEOUT:
435 return -ETIMEDOUT;
436 case PN544_FW_CMD_RESULT_BAD_CRC:
437 return -ENODATA;
438 case PN544_FW_CMD_RESULT_ACCESS_DENIED:
439 return -EACCES;
440 case PN544_FW_CMD_RESULT_PROTOCOL_ERROR:
441 return -EPROTO;
442 case PN544_FW_CMD_RESULT_INVALID_PARAMETER:
443 return -EINVAL;
444 case PN544_FW_CMD_RESULT_UNSUPPORTED_COMMAND:
445 return -ENOTSUPP;
446 case PN544_FW_CMD_RESULT_INVALID_LENGTH:
447 return -EBADMSG;
448 case PN544_FW_CMD_RESULT_CRYPTOGRAPHIC_ERROR:
449 return -ENOKEY;
450 case PN544_FW_CMD_RESULT_VERSION_CONDITIONS_ERROR:
451 return -EINVAL;
452 case PN544_FW_CMD_RESULT_MEMORY_ERROR:
453 return -ENOMEM;
454 case PN544_FW_CMD_RESULT_COMMAND_REJECTED:
455 return -EACCES;
456 case PN544_FW_CMD_RESULT_WRITE_FAILED:
457 case PN544_FW_CMD_RESULT_CHUNK_ERROR:
458 return -EIO;
459 default:
460 return -EIO;
461 }
462 }
463
464 /*
465 * Reads an shdlc frame from the chip. This is not as straightforward as it
466 * seems. There are cases where we could loose the frame start synchronization.
467 * The frame format is len-data-crc, and corruption can occur anywhere while
468 * transiting on i2c bus, such that we could read an invalid len.
469 * In order to recover synchronization with the next frame, we must be sure
470 * to read the real amount of data without using the len byte. We do this by
471 * assuming the following:
472 * - the chip will always present only one single complete frame on the bus
473 * before triggering the interrupt
474 * - the chip will not present a new frame until we have completely read
475 * the previous one (or until we have handled the interrupt).
476 * The tricky case is when we read a corrupted len that is less than the real
477 * len. We must detect this here in order to determine that we need to flush
478 * the bus. This is the reason why we check the crc here.
479 */
pn544_hci_i2c_irq_thread_fn(int irq,void * phy_id)480 static irqreturn_t pn544_hci_i2c_irq_thread_fn(int irq, void *phy_id)
481 {
482 struct pn544_i2c_phy *phy = phy_id;
483 struct i2c_client *client;
484 struct sk_buff *skb = NULL;
485 int r;
486
487 if (!phy || irq != phy->i2c_dev->irq) {
488 WARN_ON_ONCE(1);
489 return IRQ_NONE;
490 }
491
492 client = phy->i2c_dev;
493 dev_dbg(&client->dev, "IRQ\n");
494
495 if (phy->hard_fault != 0)
496 return IRQ_HANDLED;
497
498 if (phy->run_mode == PN544_FW_MODE) {
499 phy->fw_cmd_result = pn544_hci_i2c_fw_read_status(phy);
500 schedule_work(&phy->fw_work);
501 } else {
502 r = pn544_hci_i2c_read(phy, &skb);
503 if (r == -EREMOTEIO) {
504 phy->hard_fault = r;
505
506 nfc_hci_recv_frame(phy->hdev, NULL);
507
508 return IRQ_HANDLED;
509 } else if ((r == -ENOMEM) || (r == -EBADMSG)) {
510 return IRQ_HANDLED;
511 }
512
513 nfc_hci_recv_frame(phy->hdev, skb);
514 }
515 return IRQ_HANDLED;
516 }
517
518 static const struct nfc_phy_ops i2c_phy_ops = {
519 .write = pn544_hci_i2c_write,
520 .enable = pn544_hci_i2c_enable,
521 .disable = pn544_hci_i2c_disable,
522 };
523
pn544_hci_i2c_fw_download(void * phy_id,const char * firmware_name,u8 hw_variant)524 static int pn544_hci_i2c_fw_download(void *phy_id, const char *firmware_name,
525 u8 hw_variant)
526 {
527 struct pn544_i2c_phy *phy = phy_id;
528
529 pr_info("Starting Firmware Download (%s)\n", firmware_name);
530
531 strcpy(phy->firmware_name, firmware_name);
532
533 phy->hw_variant = hw_variant;
534 phy->fw_work_state = FW_WORK_STATE_START;
535
536 schedule_work(&phy->fw_work);
537
538 return 0;
539 }
540
pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy * phy,int result)541 static void pn544_hci_i2c_fw_work_complete(struct pn544_i2c_phy *phy,
542 int result)
543 {
544 pr_info("Firmware Download Complete, result=%d\n", result);
545
546 pn544_hci_i2c_disable(phy);
547
548 phy->fw_work_state = FW_WORK_STATE_IDLE;
549
550 if (phy->fw) {
551 release_firmware(phy->fw);
552 phy->fw = NULL;
553 }
554
555 nfc_fw_download_done(phy->hdev->ndev, phy->firmware_name, (u32) -result);
556 }
557
pn544_hci_i2c_fw_write_cmd(struct i2c_client * client,u32 dest_addr,const u8 * data,u16 datalen)558 static int pn544_hci_i2c_fw_write_cmd(struct i2c_client *client, u32 dest_addr,
559 const u8 *data, u16 datalen)
560 {
561 u8 frame[PN544_FW_I2C_MAX_PAYLOAD];
562 struct pn544_i2c_fw_frame_write *framep;
563 u16 params_len;
564 int framelen;
565 int r;
566
567 if (datalen > PN544_FW_I2C_WRITE_DATA_MAX_LEN)
568 datalen = PN544_FW_I2C_WRITE_DATA_MAX_LEN;
569
570 framep = (struct pn544_i2c_fw_frame_write *) frame;
571
572 params_len = sizeof(framep->be_dest_addr) +
573 sizeof(framep->be_datalen) + datalen;
574 framelen = params_len + sizeof(framep->cmd) +
575 sizeof(framep->be_length);
576
577 framep->cmd = PN544_FW_CMD_WRITE;
578
579 put_unaligned_be16(params_len, &framep->be_length);
580
581 framep->be_dest_addr[0] = (dest_addr & 0xff0000) >> 16;
582 framep->be_dest_addr[1] = (dest_addr & 0xff00) >> 8;
583 framep->be_dest_addr[2] = dest_addr & 0xff;
584
585 put_unaligned_be16(datalen, &framep->be_datalen);
586
587 memcpy(framep->data, data, datalen);
588
589 r = i2c_master_send(client, frame, framelen);
590
591 if (r == framelen)
592 return datalen;
593 else if (r < 0)
594 return r;
595 else
596 return -EIO;
597 }
598
pn544_hci_i2c_fw_check_cmd(struct i2c_client * client,u32 start_addr,const u8 * data,u16 datalen)599 static int pn544_hci_i2c_fw_check_cmd(struct i2c_client *client, u32 start_addr,
600 const u8 *data, u16 datalen)
601 {
602 struct pn544_i2c_fw_frame_check frame;
603 int r;
604 u16 crc;
605
606 /* calculate local crc for the data we want to check */
607 crc = crc_ccitt(0xffff, data, datalen);
608
609 frame.cmd = PN544_FW_CMD_CHECK;
610
611 put_unaligned_be16(sizeof(frame.be_start_addr) +
612 sizeof(frame.be_datalen) + sizeof(frame.be_crc),
613 &frame.be_length);
614
615 /* tell the chip the memory region to which our crc applies */
616 frame.be_start_addr[0] = (start_addr & 0xff0000) >> 16;
617 frame.be_start_addr[1] = (start_addr & 0xff00) >> 8;
618 frame.be_start_addr[2] = start_addr & 0xff;
619
620 put_unaligned_be16(datalen, &frame.be_datalen);
621
622 /*
623 * and give our local crc. Chip will calculate its own crc for the
624 * region and compare with ours.
625 */
626 put_unaligned_be16(crc, &frame.be_crc);
627
628 r = i2c_master_send(client, (const char *) &frame, sizeof(frame));
629
630 if (r == sizeof(frame))
631 return 0;
632 else if (r < 0)
633 return r;
634 else
635 return -EIO;
636 }
637
pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy * phy)638 static int pn544_hci_i2c_fw_write_chunk(struct pn544_i2c_phy *phy)
639 {
640 int r;
641
642 r = pn544_hci_i2c_fw_write_cmd(phy->i2c_dev,
643 phy->fw_blob_dest_addr + phy->fw_written,
644 phy->fw_blob_data + phy->fw_written,
645 phy->fw_blob_size - phy->fw_written);
646 if (r < 0)
647 return r;
648
649 phy->fw_written += r;
650 phy->fw_work_state = FW_WORK_STATE_WAIT_WRITE_ANSWER;
651
652 return 0;
653 }
654
pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy * phy,const u8 * data,u16 datalen)655 static int pn544_hci_i2c_fw_secure_write_frame_cmd(struct pn544_i2c_phy *phy,
656 const u8 *data, u16 datalen)
657 {
658 u8 buf[PN544_FW_I2C_MAX_PAYLOAD];
659 struct pn544_i2c_fw_secure_frame *chunk;
660 int chunklen;
661 int r;
662
663 if (datalen > PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN)
664 datalen = PN544_FW_SECURE_CHUNK_WRITE_DATA_MAX_LEN;
665
666 chunk = (struct pn544_i2c_fw_secure_frame *) buf;
667
668 chunk->cmd = PN544_FW_CMD_SECURE_CHUNK_WRITE;
669
670 put_unaligned_be16(datalen, &chunk->be_datalen);
671
672 memcpy(chunk->data, data, datalen);
673
674 chunklen = sizeof(chunk->cmd) + sizeof(chunk->be_datalen) + datalen;
675
676 r = i2c_master_send(phy->i2c_dev, buf, chunklen);
677
678 if (r == chunklen)
679 return datalen;
680 else if (r < 0)
681 return r;
682 else
683 return -EIO;
684
685 }
686
pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy * phy)687 static int pn544_hci_i2c_fw_secure_write_frame(struct pn544_i2c_phy *phy)
688 {
689 struct pn544_i2c_fw_secure_frame *framep;
690 int r;
691
692 framep = (struct pn544_i2c_fw_secure_frame *) phy->fw_blob_data;
693 if (phy->fw_written == 0)
694 phy->fw_blob_size = get_unaligned_be16(&framep->be_datalen)
695 + PN544_FW_SECURE_FRAME_HEADER_LEN;
696
697 /* Only secure write command can be chunked*/
698 if (phy->fw_blob_size > PN544_FW_I2C_MAX_PAYLOAD &&
699 framep->cmd != PN544_FW_CMD_SECURE_WRITE)
700 return -EINVAL;
701
702 /* The firmware also have other commands, we just send them directly */
703 if (phy->fw_blob_size < PN544_FW_I2C_MAX_PAYLOAD) {
704 r = i2c_master_send(phy->i2c_dev,
705 (const char *) phy->fw_blob_data, phy->fw_blob_size);
706
707 if (r == phy->fw_blob_size)
708 goto exit;
709 else if (r < 0)
710 return r;
711 else
712 return -EIO;
713 }
714
715 r = pn544_hci_i2c_fw_secure_write_frame_cmd(phy,
716 phy->fw_blob_data + phy->fw_written,
717 phy->fw_blob_size - phy->fw_written);
718 if (r < 0)
719 return r;
720
721 exit:
722 phy->fw_written += r;
723 phy->fw_work_state = FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER;
724
725 /* SW reset command will not trig any response from PN544 */
726 if (framep->cmd == PN544_FW_CMD_RESET) {
727 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
728 phy->fw_cmd_result = 0;
729 schedule_work(&phy->fw_work);
730 }
731
732 return 0;
733 }
734
pn544_hci_i2c_fw_work(struct work_struct * work)735 static void pn544_hci_i2c_fw_work(struct work_struct *work)
736 {
737 struct pn544_i2c_phy *phy = container_of(work, struct pn544_i2c_phy,
738 fw_work);
739 int r;
740 struct pn544_i2c_fw_blob *blob;
741 struct pn544_i2c_fw_secure_blob *secure_blob;
742
743 switch (phy->fw_work_state) {
744 case FW_WORK_STATE_START:
745 pn544_hci_i2c_enable_mode(phy, PN544_FW_MODE);
746
747 r = request_firmware(&phy->fw, phy->firmware_name,
748 &phy->i2c_dev->dev);
749 if (r < 0)
750 goto exit_state_start;
751
752 phy->fw_written = 0;
753
754 switch (phy->hw_variant) {
755 case PN544_HW_VARIANT_C2:
756 blob = (struct pn544_i2c_fw_blob *) phy->fw->data;
757 phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
758 phy->fw_blob_dest_addr = get_unaligned_be32(
759 &blob->be_destaddr);
760 phy->fw_blob_data = blob->data;
761
762 r = pn544_hci_i2c_fw_write_chunk(phy);
763 break;
764 case PN544_HW_VARIANT_C3:
765 secure_blob = (struct pn544_i2c_fw_secure_blob *)
766 phy->fw->data;
767 phy->fw_blob_data = secure_blob->data;
768 phy->fw_size = phy->fw->size;
769 r = pn544_hci_i2c_fw_secure_write_frame(phy);
770 break;
771 default:
772 r = -ENOTSUPP;
773 break;
774 }
775
776 exit_state_start:
777 if (r < 0)
778 pn544_hci_i2c_fw_work_complete(phy, r);
779 break;
780
781 case FW_WORK_STATE_WAIT_WRITE_ANSWER:
782 r = phy->fw_cmd_result;
783 if (r < 0)
784 goto exit_state_wait_write_answer;
785
786 if (phy->fw_written == phy->fw_blob_size) {
787 r = pn544_hci_i2c_fw_check_cmd(phy->i2c_dev,
788 phy->fw_blob_dest_addr,
789 phy->fw_blob_data,
790 phy->fw_blob_size);
791 if (r < 0)
792 goto exit_state_wait_write_answer;
793 phy->fw_work_state = FW_WORK_STATE_WAIT_CHECK_ANSWER;
794 break;
795 }
796
797 r = pn544_hci_i2c_fw_write_chunk(phy);
798
799 exit_state_wait_write_answer:
800 if (r < 0)
801 pn544_hci_i2c_fw_work_complete(phy, r);
802 break;
803
804 case FW_WORK_STATE_WAIT_CHECK_ANSWER:
805 r = phy->fw_cmd_result;
806 if (r < 0)
807 goto exit_state_wait_check_answer;
808
809 blob = (struct pn544_i2c_fw_blob *) (phy->fw_blob_data +
810 phy->fw_blob_size);
811 phy->fw_blob_size = get_unaligned_be32(&blob->be_size);
812 if (phy->fw_blob_size != 0) {
813 phy->fw_blob_dest_addr =
814 get_unaligned_be32(&blob->be_destaddr);
815 phy->fw_blob_data = blob->data;
816
817 phy->fw_written = 0;
818 r = pn544_hci_i2c_fw_write_chunk(phy);
819 }
820
821 exit_state_wait_check_answer:
822 if (r < 0 || phy->fw_blob_size == 0)
823 pn544_hci_i2c_fw_work_complete(phy, r);
824 break;
825
826 case FW_WORK_STATE_WAIT_SECURE_WRITE_ANSWER:
827 r = phy->fw_cmd_result;
828 if (r < 0)
829 goto exit_state_wait_secure_write_answer;
830
831 if (r == PN544_FW_CMD_RESULT_CHUNK_OK) {
832 r = pn544_hci_i2c_fw_secure_write_frame(phy);
833 goto exit_state_wait_secure_write_answer;
834 }
835
836 if (phy->fw_written == phy->fw_blob_size) {
837 secure_blob = (struct pn544_i2c_fw_secure_blob *)
838 (phy->fw_blob_data + phy->fw_blob_size);
839 phy->fw_size -= phy->fw_blob_size +
840 PN544_FW_SECURE_BLOB_HEADER_LEN;
841 if (phy->fw_size >= PN544_FW_SECURE_BLOB_HEADER_LEN
842 + PN544_FW_SECURE_FRAME_HEADER_LEN) {
843 phy->fw_blob_data = secure_blob->data;
844
845 phy->fw_written = 0;
846 r = pn544_hci_i2c_fw_secure_write_frame(phy);
847 }
848 }
849
850 exit_state_wait_secure_write_answer:
851 if (r < 0 || phy->fw_size == 0)
852 pn544_hci_i2c_fw_work_complete(phy, r);
853 break;
854
855 default:
856 break;
857 }
858 }
859
860 static const struct acpi_gpio_params enable_gpios = { 1, 0, false };
861 static const struct acpi_gpio_params firmware_gpios = { 2, 0, false };
862
863 static const struct acpi_gpio_mapping acpi_pn544_gpios[] = {
864 { "enable-gpios", &enable_gpios, 1 },
865 { "firmware-gpios", &firmware_gpios, 1 },
866 { },
867 };
868
pn544_hci_i2c_probe(struct i2c_client * client,const struct i2c_device_id * id)869 static int pn544_hci_i2c_probe(struct i2c_client *client,
870 const struct i2c_device_id *id)
871 {
872 struct device *dev = &client->dev;
873 struct pn544_i2c_phy *phy;
874 int r = 0;
875
876 if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
877 nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
878 return -ENODEV;
879 }
880
881 phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy),
882 GFP_KERNEL);
883 if (!phy)
884 return -ENOMEM;
885
886 INIT_WORK(&phy->fw_work, pn544_hci_i2c_fw_work);
887 phy->fw_work_state = FW_WORK_STATE_IDLE;
888
889 phy->i2c_dev = client;
890 i2c_set_clientdata(client, phy);
891
892 r = devm_acpi_dev_add_driver_gpios(dev, acpi_pn544_gpios);
893 if (r)
894 dev_dbg(dev, "Unable to add GPIO mapping table\n");
895
896 /* Get EN GPIO */
897 phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
898 if (IS_ERR(phy->gpiod_en)) {
899 nfc_err(dev, "Unable to get EN GPIO\n");
900 return PTR_ERR(phy->gpiod_en);
901 }
902
903 /* Get FW GPIO */
904 phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
905 if (IS_ERR(phy->gpiod_fw)) {
906 nfc_err(dev, "Unable to get FW GPIO\n");
907 return PTR_ERR(phy->gpiod_fw);
908 }
909
910 pn544_hci_i2c_platform_init(phy);
911
912 r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
913 pn544_hci_i2c_irq_thread_fn,
914 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
915 PN544_HCI_I2C_DRIVER_NAME, phy);
916 if (r < 0) {
917 nfc_err(&client->dev, "Unable to register IRQ handler\n");
918 return r;
919 }
920
921 r = pn544_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
922 PN544_I2C_FRAME_HEADROOM, PN544_I2C_FRAME_TAILROOM,
923 PN544_HCI_I2C_LLC_MAX_PAYLOAD,
924 pn544_hci_i2c_fw_download, &phy->hdev);
925 if (r < 0)
926 return r;
927
928 return 0;
929 }
930
pn544_hci_i2c_remove(struct i2c_client * client)931 static void pn544_hci_i2c_remove(struct i2c_client *client)
932 {
933 struct pn544_i2c_phy *phy = i2c_get_clientdata(client);
934
935 cancel_work_sync(&phy->fw_work);
936 if (phy->fw_work_state != FW_WORK_STATE_IDLE)
937 pn544_hci_i2c_fw_work_complete(phy, -ENODEV);
938
939 pn544_hci_remove(phy->hdev);
940
941 if (phy->powered)
942 pn544_hci_i2c_disable(phy);
943 }
944
945 static const struct of_device_id of_pn544_i2c_match[] __maybe_unused = {
946 { .compatible = "nxp,pn544-i2c", },
947 {},
948 };
949 MODULE_DEVICE_TABLE(of, of_pn544_i2c_match);
950
951 static struct i2c_driver pn544_hci_i2c_driver = {
952 .driver = {
953 .name = PN544_HCI_I2C_DRIVER_NAME,
954 .of_match_table = of_match_ptr(of_pn544_i2c_match),
955 .acpi_match_table = ACPI_PTR(pn544_hci_i2c_acpi_match),
956 },
957 .probe = pn544_hci_i2c_probe,
958 .id_table = pn544_hci_i2c_id_table,
959 .remove = pn544_hci_i2c_remove,
960 };
961
962 module_i2c_driver(pn544_hci_i2c_driver);
963
964 MODULE_LICENSE("GPL");
965 MODULE_DESCRIPTION(DRIVER_DESC);
966