1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Copyright 2016 Broadcom
4 */
5 #include <linux/clk.h>
6 #include <linux/delay.h>
7 #include <linux/device.h>
8 #include <linux/iopoll.h>
9 #include <linux/mdio-mux.h>
10 #include <linux/module.h>
11 #include <linux/of_mdio.h>
12 #include <linux/phy.h>
13 #include <linux/platform_device.h>
14
15 #define MDIO_RATE_ADJ_EXT_OFFSET 0x000
16 #define MDIO_RATE_ADJ_INT_OFFSET 0x004
17 #define MDIO_RATE_ADJ_DIVIDENT_SHIFT 16
18
19 #define MDIO_SCAN_CTRL_OFFSET 0x008
20 #define MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR 28
21
22 #define MDIO_PARAM_OFFSET 0x23c
23 #define MDIO_PARAM_MIIM_CYCLE 29
24 #define MDIO_PARAM_INTERNAL_SEL 25
25 #define MDIO_PARAM_BUS_ID 22
26 #define MDIO_PARAM_C45_SEL 21
27 #define MDIO_PARAM_PHY_ID 16
28 #define MDIO_PARAM_PHY_DATA 0
29
30 #define MDIO_READ_OFFSET 0x240
31 #define MDIO_READ_DATA_MASK 0xffff
32 #define MDIO_ADDR_OFFSET 0x244
33
34 #define MDIO_CTRL_OFFSET 0x248
35 #define MDIO_CTRL_WRITE_OP 0x1
36 #define MDIO_CTRL_READ_OP 0x2
37
38 #define MDIO_STAT_OFFSET 0x24c
39 #define MDIO_STAT_DONE 1
40
41 #define BUS_MAX_ADDR 32
42 #define EXT_BUS_START_ADDR 16
43
44 #define MDIO_REG_ADDR_SPACE_SIZE 0x250
45
46 #define MDIO_OPERATING_FREQUENCY 11000000
47 #define MDIO_RATE_ADJ_DIVIDENT 1
48
49 struct iproc_mdiomux_desc {
50 void *mux_handle;
51 void __iomem *base;
52 struct device *dev;
53 struct mii_bus *mii_bus;
54 struct clk *core_clk;
55 };
56
mdio_mux_iproc_config(struct iproc_mdiomux_desc * md)57 static void mdio_mux_iproc_config(struct iproc_mdiomux_desc *md)
58 {
59 u32 divisor;
60 u32 val;
61
62 /* Disable external mdio master access */
63 val = readl(md->base + MDIO_SCAN_CTRL_OFFSET);
64 val |= BIT(MDIO_SCAN_CTRL_OVRIDE_EXT_MSTR);
65 writel(val, md->base + MDIO_SCAN_CTRL_OFFSET);
66
67 if (md->core_clk) {
68 /* use rate adjust regs to derive the mdio's operating
69 * frequency from the specified core clock
70 */
71 divisor = clk_get_rate(md->core_clk) / MDIO_OPERATING_FREQUENCY;
72 divisor = divisor / (MDIO_RATE_ADJ_DIVIDENT + 1);
73 val = divisor;
74 val |= MDIO_RATE_ADJ_DIVIDENT << MDIO_RATE_ADJ_DIVIDENT_SHIFT;
75 writel(val, md->base + MDIO_RATE_ADJ_EXT_OFFSET);
76 writel(val, md->base + MDIO_RATE_ADJ_INT_OFFSET);
77 }
78 }
79
iproc_mdio_wait_for_idle(void __iomem * base,bool result)80 static int iproc_mdio_wait_for_idle(void __iomem *base, bool result)
81 {
82 u32 val;
83
84 return readl_poll_timeout(base + MDIO_STAT_OFFSET, val,
85 (val & MDIO_STAT_DONE) == result,
86 2000, 1000000);
87 }
88
89 /* start_miim_ops- Program and start MDIO transaction over mdio bus.
90 * @base: Base address
91 * @phyid: phyid of the selected bus.
92 * @reg: register offset to be read/written.
93 * @val :0 if read op else value to be written in @reg;
94 * @op: Operation that need to be carried out.
95 * MDIO_CTRL_READ_OP: Read transaction.
96 * MDIO_CTRL_WRITE_OP: Write transaction.
97 *
98 * Return value: Successful Read operation returns read reg values and write
99 * operation returns 0. Failure operation returns negative error code.
100 */
start_miim_ops(void __iomem * base,u16 phyid,u32 reg,u16 val,u32 op)101 static int start_miim_ops(void __iomem *base,
102 u16 phyid, u32 reg, u16 val, u32 op)
103 {
104 u32 param;
105 int ret;
106
107 writel(0, base + MDIO_CTRL_OFFSET);
108 ret = iproc_mdio_wait_for_idle(base, 0);
109 if (ret)
110 goto err;
111
112 param = readl(base + MDIO_PARAM_OFFSET);
113 param |= phyid << MDIO_PARAM_PHY_ID;
114 param |= val << MDIO_PARAM_PHY_DATA;
115 if (reg & MII_ADDR_C45)
116 param |= BIT(MDIO_PARAM_C45_SEL);
117
118 writel(param, base + MDIO_PARAM_OFFSET);
119
120 writel(reg, base + MDIO_ADDR_OFFSET);
121
122 writel(op, base + MDIO_CTRL_OFFSET);
123
124 ret = iproc_mdio_wait_for_idle(base, 1);
125 if (ret)
126 goto err;
127
128 if (op == MDIO_CTRL_READ_OP)
129 ret = readl(base + MDIO_READ_OFFSET) & MDIO_READ_DATA_MASK;
130 err:
131 return ret;
132 }
133
iproc_mdiomux_read(struct mii_bus * bus,int phyid,int reg)134 static int iproc_mdiomux_read(struct mii_bus *bus, int phyid, int reg)
135 {
136 struct iproc_mdiomux_desc *md = bus->priv;
137 int ret;
138
139 ret = start_miim_ops(md->base, phyid, reg, 0, MDIO_CTRL_READ_OP);
140 if (ret < 0)
141 dev_err(&bus->dev, "mdiomux read operation failed!!!");
142
143 return ret;
144 }
145
iproc_mdiomux_write(struct mii_bus * bus,int phyid,int reg,u16 val)146 static int iproc_mdiomux_write(struct mii_bus *bus,
147 int phyid, int reg, u16 val)
148 {
149 struct iproc_mdiomux_desc *md = bus->priv;
150 int ret;
151
152 /* Write val at reg offset */
153 ret = start_miim_ops(md->base, phyid, reg, val, MDIO_CTRL_WRITE_OP);
154 if (ret < 0)
155 dev_err(&bus->dev, "mdiomux write operation failed!!!");
156
157 return ret;
158 }
159
mdio_mux_iproc_switch_fn(int current_child,int desired_child,void * data)160 static int mdio_mux_iproc_switch_fn(int current_child, int desired_child,
161 void *data)
162 {
163 struct iproc_mdiomux_desc *md = data;
164 u32 param, bus_id;
165 bool bus_dir;
166
167 /* select bus and its properties */
168 bus_dir = (desired_child < EXT_BUS_START_ADDR);
169 bus_id = bus_dir ? desired_child : (desired_child - EXT_BUS_START_ADDR);
170
171 param = (bus_dir ? 1 : 0) << MDIO_PARAM_INTERNAL_SEL;
172 param |= (bus_id << MDIO_PARAM_BUS_ID);
173
174 writel(param, md->base + MDIO_PARAM_OFFSET);
175 return 0;
176 }
177
mdio_mux_iproc_probe(struct platform_device * pdev)178 static int mdio_mux_iproc_probe(struct platform_device *pdev)
179 {
180 struct iproc_mdiomux_desc *md;
181 struct mii_bus *bus;
182 struct resource *res;
183 int rc;
184
185 md = devm_kzalloc(&pdev->dev, sizeof(*md), GFP_KERNEL);
186 if (!md)
187 return -ENOMEM;
188 md->dev = &pdev->dev;
189
190 md->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
191 if (IS_ERR(md->base))
192 return PTR_ERR(md->base);
193 if (res->start & 0xfff) {
194 /* For backward compatibility in case the
195 * base address is specified with an offset.
196 */
197 dev_info(&pdev->dev, "fix base address in dt-blob\n");
198 res->start &= ~0xfff;
199 res->end = res->start + MDIO_REG_ADDR_SPACE_SIZE - 1;
200 }
201
202 md->mii_bus = devm_mdiobus_alloc(&pdev->dev);
203 if (!md->mii_bus) {
204 dev_err(&pdev->dev, "mdiomux bus alloc failed\n");
205 return -ENOMEM;
206 }
207
208 md->core_clk = devm_clk_get(&pdev->dev, NULL);
209 if (md->core_clk == ERR_PTR(-ENOENT) ||
210 md->core_clk == ERR_PTR(-EINVAL))
211 md->core_clk = NULL;
212 else if (IS_ERR(md->core_clk))
213 return PTR_ERR(md->core_clk);
214
215 rc = clk_prepare_enable(md->core_clk);
216 if (rc) {
217 dev_err(&pdev->dev, "failed to enable core clk\n");
218 return rc;
219 }
220
221 bus = md->mii_bus;
222 bus->priv = md;
223 bus->name = "iProc MDIO mux bus";
224 snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);
225 bus->parent = &pdev->dev;
226 bus->read = iproc_mdiomux_read;
227 bus->write = iproc_mdiomux_write;
228
229 bus->phy_mask = ~0;
230 bus->dev.of_node = pdev->dev.of_node;
231 rc = mdiobus_register(bus);
232 if (rc) {
233 dev_err(&pdev->dev, "mdiomux registration failed\n");
234 goto out_clk;
235 }
236
237 platform_set_drvdata(pdev, md);
238
239 rc = mdio_mux_init(md->dev, md->dev->of_node, mdio_mux_iproc_switch_fn,
240 &md->mux_handle, md, md->mii_bus);
241 if (rc) {
242 dev_info(md->dev, "mdiomux initialization failed\n");
243 goto out_register;
244 }
245
246 mdio_mux_iproc_config(md);
247
248 dev_info(md->dev, "iProc mdiomux registered\n");
249 return 0;
250
251 out_register:
252 mdiobus_unregister(bus);
253 out_clk:
254 clk_disable_unprepare(md->core_clk);
255 return rc;
256 }
257
mdio_mux_iproc_remove(struct platform_device * pdev)258 static int mdio_mux_iproc_remove(struct platform_device *pdev)
259 {
260 struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev);
261
262 mdio_mux_uninit(md->mux_handle);
263 mdiobus_unregister(md->mii_bus);
264 clk_disable_unprepare(md->core_clk);
265
266 return 0;
267 }
268
269 #ifdef CONFIG_PM_SLEEP
mdio_mux_iproc_suspend(struct device * dev)270 static int mdio_mux_iproc_suspend(struct device *dev)
271 {
272 struct iproc_mdiomux_desc *md = dev_get_drvdata(dev);
273
274 clk_disable_unprepare(md->core_clk);
275
276 return 0;
277 }
278
mdio_mux_iproc_resume(struct device * dev)279 static int mdio_mux_iproc_resume(struct device *dev)
280 {
281 struct iproc_mdiomux_desc *md = dev_get_drvdata(dev);
282 int rc;
283
284 rc = clk_prepare_enable(md->core_clk);
285 if (rc) {
286 dev_err(md->dev, "failed to enable core clk\n");
287 return rc;
288 }
289 mdio_mux_iproc_config(md);
290
291 return 0;
292 }
293 #endif
294
295 static SIMPLE_DEV_PM_OPS(mdio_mux_iproc_pm_ops,
296 mdio_mux_iproc_suspend, mdio_mux_iproc_resume);
297
298 static const struct of_device_id mdio_mux_iproc_match[] = {
299 {
300 .compatible = "brcm,mdio-mux-iproc",
301 },
302 {},
303 };
304 MODULE_DEVICE_TABLE(of, mdio_mux_iproc_match);
305
306 static struct platform_driver mdiomux_iproc_driver = {
307 .driver = {
308 .name = "mdio-mux-iproc",
309 .of_match_table = mdio_mux_iproc_match,
310 .pm = &mdio_mux_iproc_pm_ops,
311 },
312 .probe = mdio_mux_iproc_probe,
313 .remove = mdio_mux_iproc_remove,
314 };
315
316 module_platform_driver(mdiomux_iproc_driver);
317
318 MODULE_DESCRIPTION("iProc MDIO Mux Bus Driver");
319 MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
320 MODULE_LICENSE("GPL v2");
321