1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Realtek RTL2832 DVB-T demodulator driver
4 *
5 * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
6 * Copyright (C) 2012-2014 Antti Palosaari <crope@iki.fi>
7 */
8
9 #include "rtl2832_priv.h"
10
11 #define REG_MASK(b) (BIT(b + 1) - 1)
12
13 static const struct rtl2832_reg_entry registers[] = {
14 [DVBT_SOFT_RST] = {0x101, 2, 2},
15 [DVBT_IIC_REPEAT] = {0x101, 3, 3},
16 [DVBT_TR_WAIT_MIN_8K] = {0x188, 11, 2},
17 [DVBT_RSD_BER_FAIL_VAL] = {0x18f, 15, 0},
18 [DVBT_EN_BK_TRK] = {0x1a6, 7, 7},
19 [DVBT_AD_EN_REG] = {0x008, 7, 7},
20 [DVBT_AD_EN_REG1] = {0x008, 6, 6},
21 [DVBT_EN_BBIN] = {0x1b1, 0, 0},
22 [DVBT_MGD_THD0] = {0x195, 7, 0},
23 [DVBT_MGD_THD1] = {0x196, 7, 0},
24 [DVBT_MGD_THD2] = {0x197, 7, 0},
25 [DVBT_MGD_THD3] = {0x198, 7, 0},
26 [DVBT_MGD_THD4] = {0x199, 7, 0},
27 [DVBT_MGD_THD5] = {0x19a, 7, 0},
28 [DVBT_MGD_THD6] = {0x19b, 7, 0},
29 [DVBT_MGD_THD7] = {0x19c, 7, 0},
30 [DVBT_EN_CACQ_NOTCH] = {0x161, 4, 4},
31 [DVBT_AD_AV_REF] = {0x009, 6, 0},
32 [DVBT_REG_PI] = {0x00a, 2, 0},
33 [DVBT_PIP_ON] = {0x021, 3, 3},
34 [DVBT_SCALE1_B92] = {0x292, 7, 0},
35 [DVBT_SCALE1_B93] = {0x293, 7, 0},
36 [DVBT_SCALE1_BA7] = {0x2a7, 7, 0},
37 [DVBT_SCALE1_BA9] = {0x2a9, 7, 0},
38 [DVBT_SCALE1_BAA] = {0x2aa, 7, 0},
39 [DVBT_SCALE1_BAB] = {0x2ab, 7, 0},
40 [DVBT_SCALE1_BAC] = {0x2ac, 7, 0},
41 [DVBT_SCALE1_BB0] = {0x2b0, 7, 0},
42 [DVBT_SCALE1_BB1] = {0x2b1, 7, 0},
43 [DVBT_KB_P1] = {0x164, 3, 1},
44 [DVBT_KB_P2] = {0x164, 6, 4},
45 [DVBT_KB_P3] = {0x165, 2, 0},
46 [DVBT_OPT_ADC_IQ] = {0x006, 5, 4},
47 [DVBT_AD_AVI] = {0x009, 1, 0},
48 [DVBT_AD_AVQ] = {0x009, 3, 2},
49 [DVBT_K1_CR_STEP12] = {0x2ad, 9, 4},
50 [DVBT_TRK_KS_P2] = {0x16f, 2, 0},
51 [DVBT_TRK_KS_I2] = {0x170, 5, 3},
52 [DVBT_TR_THD_SET2] = {0x172, 3, 0},
53 [DVBT_TRK_KC_P2] = {0x173, 5, 3},
54 [DVBT_TRK_KC_I2] = {0x175, 2, 0},
55 [DVBT_CR_THD_SET2] = {0x176, 7, 6},
56 [DVBT_PSET_IFFREQ] = {0x119, 21, 0},
57 [DVBT_SPEC_INV] = {0x115, 0, 0},
58 [DVBT_RSAMP_RATIO] = {0x19f, 27, 2},
59 [DVBT_CFREQ_OFF_RATIO] = {0x19d, 23, 4},
60 [DVBT_FSM_STAGE] = {0x351, 6, 3},
61 [DVBT_RX_CONSTEL] = {0x33c, 3, 2},
62 [DVBT_RX_HIER] = {0x33c, 6, 4},
63 [DVBT_RX_C_RATE_LP] = {0x33d, 2, 0},
64 [DVBT_RX_C_RATE_HP] = {0x33d, 5, 3},
65 [DVBT_GI_IDX] = {0x351, 1, 0},
66 [DVBT_FFT_MODE_IDX] = {0x351, 2, 2},
67 [DVBT_RSD_BER_EST] = {0x34e, 15, 0},
68 [DVBT_CE_EST_EVM] = {0x40c, 15, 0},
69 [DVBT_RF_AGC_VAL] = {0x35b, 13, 0},
70 [DVBT_IF_AGC_VAL] = {0x359, 13, 0},
71 [DVBT_DAGC_VAL] = {0x305, 7, 0},
72 [DVBT_SFREQ_OFF] = {0x318, 13, 0},
73 [DVBT_CFREQ_OFF] = {0x35f, 17, 0},
74 [DVBT_POLAR_RF_AGC] = {0x00e, 1, 1},
75 [DVBT_POLAR_IF_AGC] = {0x00e, 0, 0},
76 [DVBT_AAGC_HOLD] = {0x104, 5, 5},
77 [DVBT_EN_RF_AGC] = {0x104, 6, 6},
78 [DVBT_EN_IF_AGC] = {0x104, 7, 7},
79 [DVBT_IF_AGC_MIN] = {0x108, 7, 0},
80 [DVBT_IF_AGC_MAX] = {0x109, 7, 0},
81 [DVBT_RF_AGC_MIN] = {0x10a, 7, 0},
82 [DVBT_RF_AGC_MAX] = {0x10b, 7, 0},
83 [DVBT_IF_AGC_MAN] = {0x10c, 6, 6},
84 [DVBT_IF_AGC_MAN_VAL] = {0x10c, 13, 0},
85 [DVBT_RF_AGC_MAN] = {0x10e, 6, 6},
86 [DVBT_RF_AGC_MAN_VAL] = {0x10e, 13, 0},
87 [DVBT_DAGC_TRG_VAL] = {0x112, 7, 0},
88 [DVBT_AGC_TARG_VAL_0] = {0x102, 0, 0},
89 [DVBT_AGC_TARG_VAL_8_1] = {0x103, 7, 0},
90 [DVBT_AAGC_LOOP_GAIN] = {0x1c7, 5, 1},
91 [DVBT_LOOP_GAIN2_3_0] = {0x104, 4, 1},
92 [DVBT_LOOP_GAIN2_4] = {0x105, 7, 7},
93 [DVBT_LOOP_GAIN3] = {0x1c8, 4, 0},
94 [DVBT_VTOP1] = {0x106, 5, 0},
95 [DVBT_VTOP2] = {0x1c9, 5, 0},
96 [DVBT_VTOP3] = {0x1ca, 5, 0},
97 [DVBT_KRF1] = {0x1cb, 7, 0},
98 [DVBT_KRF2] = {0x107, 7, 0},
99 [DVBT_KRF3] = {0x1cd, 7, 0},
100 [DVBT_KRF4] = {0x1ce, 7, 0},
101 [DVBT_EN_GI_PGA] = {0x1e5, 0, 0},
102 [DVBT_THD_LOCK_UP] = {0x1d9, 8, 0},
103 [DVBT_THD_LOCK_DW] = {0x1db, 8, 0},
104 [DVBT_THD_UP1] = {0x1dd, 7, 0},
105 [DVBT_THD_DW1] = {0x1de, 7, 0},
106 [DVBT_INTER_CNT_LEN] = {0x1d8, 3, 0},
107 [DVBT_GI_PGA_STATE] = {0x1e6, 3, 3},
108 [DVBT_EN_AGC_PGA] = {0x1d7, 0, 0},
109 [DVBT_CKOUTPAR] = {0x17b, 5, 5},
110 [DVBT_CKOUT_PWR] = {0x17b, 6, 6},
111 [DVBT_SYNC_DUR] = {0x17b, 7, 7},
112 [DVBT_ERR_DUR] = {0x17c, 0, 0},
113 [DVBT_SYNC_LVL] = {0x17c, 1, 1},
114 [DVBT_ERR_LVL] = {0x17c, 2, 2},
115 [DVBT_VAL_LVL] = {0x17c, 3, 3},
116 [DVBT_SERIAL] = {0x17c, 4, 4},
117 [DVBT_SER_LSB] = {0x17c, 5, 5},
118 [DVBT_CDIV_PH0] = {0x17d, 3, 0},
119 [DVBT_CDIV_PH1] = {0x17d, 7, 4},
120 [DVBT_MPEG_IO_OPT_2_2] = {0x006, 7, 7},
121 [DVBT_MPEG_IO_OPT_1_0] = {0x007, 7, 6},
122 [DVBT_CKOUTPAR_PIP] = {0x0b7, 4, 4},
123 [DVBT_CKOUT_PWR_PIP] = {0x0b7, 3, 3},
124 [DVBT_SYNC_LVL_PIP] = {0x0b7, 2, 2},
125 [DVBT_ERR_LVL_PIP] = {0x0b7, 1, 1},
126 [DVBT_VAL_LVL_PIP] = {0x0b7, 0, 0},
127 [DVBT_CKOUTPAR_PID] = {0x0b9, 4, 4},
128 [DVBT_CKOUT_PWR_PID] = {0x0b9, 3, 3},
129 [DVBT_SYNC_LVL_PID] = {0x0b9, 2, 2},
130 [DVBT_ERR_LVL_PID] = {0x0b9, 1, 1},
131 [DVBT_VAL_LVL_PID] = {0x0b9, 0, 0},
132 [DVBT_SM_PASS] = {0x193, 11, 0},
133 [DVBT_AD7_SETTING] = {0x011, 15, 0},
134 [DVBT_RSSI_R] = {0x301, 6, 0},
135 [DVBT_ACI_DET_IND] = {0x312, 0, 0},
136 [DVBT_REG_MON] = {0x00d, 1, 0},
137 [DVBT_REG_MONSEL] = {0x00d, 2, 2},
138 [DVBT_REG_GPE] = {0x00d, 7, 7},
139 [DVBT_REG_GPO] = {0x010, 0, 0},
140 [DVBT_REG_4MSEL] = {0x013, 0, 0},
141 };
142
rtl2832_rd_demod_reg(struct rtl2832_dev * dev,int reg,u32 * val)143 static int rtl2832_rd_demod_reg(struct rtl2832_dev *dev, int reg, u32 *val)
144 {
145 struct i2c_client *client = dev->client;
146 int ret, i;
147 u16 reg_start_addr;
148 u8 msb, lsb, reading[4], len;
149 u32 reading_tmp, mask;
150
151 reg_start_addr = registers[reg].start_address;
152 msb = registers[reg].msb;
153 lsb = registers[reg].lsb;
154 len = (msb >> 3) + 1;
155 mask = REG_MASK(msb - lsb);
156
157 ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len);
158 if (ret)
159 goto err;
160
161 reading_tmp = 0;
162 for (i = 0; i < len; i++)
163 reading_tmp |= reading[i] << ((len - 1 - i) * 8);
164
165 *val = (reading_tmp >> lsb) & mask;
166
167 return 0;
168 err:
169 dev_dbg(&client->dev, "failed=%d\n", ret);
170 return ret;
171 }
172
rtl2832_wr_demod_reg(struct rtl2832_dev * dev,int reg,u32 val)173 static int rtl2832_wr_demod_reg(struct rtl2832_dev *dev, int reg, u32 val)
174 {
175 struct i2c_client *client = dev->client;
176 int ret, i;
177 u16 reg_start_addr;
178 u8 msb, lsb, reading[4], writing[4], len;
179 u32 reading_tmp, writing_tmp, mask;
180
181 reg_start_addr = registers[reg].start_address;
182 msb = registers[reg].msb;
183 lsb = registers[reg].lsb;
184 len = (msb >> 3) + 1;
185 mask = REG_MASK(msb - lsb);
186
187 ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len);
188 if (ret)
189 goto err;
190
191 reading_tmp = 0;
192 for (i = 0; i < len; i++)
193 reading_tmp |= reading[i] << ((len - 1 - i) * 8);
194
195 writing_tmp = reading_tmp & ~(mask << lsb);
196 writing_tmp |= ((val & mask) << lsb);
197
198 for (i = 0; i < len; i++)
199 writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff;
200
201 ret = regmap_bulk_write(dev->regmap, reg_start_addr, writing, len);
202 if (ret)
203 goto err;
204
205 return 0;
206 err:
207 dev_dbg(&client->dev, "failed=%d\n", ret);
208 return ret;
209 }
210
rtl2832_set_if(struct dvb_frontend * fe,u32 if_freq)211 static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq)
212 {
213 struct rtl2832_dev *dev = fe->demodulator_priv;
214 struct i2c_client *client = dev->client;
215 int ret;
216 u64 pset_iffreq;
217 u8 en_bbin = (if_freq == 0 ? 0x1 : 0x0);
218
219 /*
220 * PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
221 * / CrystalFreqHz)
222 */
223 pset_iffreq = if_freq % dev->pdata->clk;
224 pset_iffreq *= 0x400000;
225 pset_iffreq = div_u64(pset_iffreq, dev->pdata->clk);
226 pset_iffreq = -pset_iffreq;
227 pset_iffreq = pset_iffreq & 0x3fffff;
228 dev_dbg(&client->dev, "if_frequency=%d pset_iffreq=%08x\n",
229 if_freq, (unsigned)pset_iffreq);
230
231 ret = rtl2832_wr_demod_reg(dev, DVBT_EN_BBIN, en_bbin);
232 if (ret)
233 goto err;
234
235 ret = rtl2832_wr_demod_reg(dev, DVBT_PSET_IFFREQ, pset_iffreq);
236 if (ret)
237 goto err;
238
239 return 0;
240 err:
241 dev_dbg(&client->dev, "failed=%d\n", ret);
242 return ret;
243 }
244
rtl2832_init(struct dvb_frontend * fe)245 static int rtl2832_init(struct dvb_frontend *fe)
246 {
247 struct rtl2832_dev *dev = fe->demodulator_priv;
248 struct i2c_client *client = dev->client;
249 struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
250 const struct rtl2832_reg_value *init;
251 int i, ret, len;
252 /* initialization values for the demodulator registers */
253 struct rtl2832_reg_value rtl2832_initial_regs[] = {
254 {DVBT_AD_EN_REG, 0x1},
255 {DVBT_AD_EN_REG1, 0x1},
256 {DVBT_RSD_BER_FAIL_VAL, 0x2800},
257 {DVBT_MGD_THD0, 0x10},
258 {DVBT_MGD_THD1, 0x20},
259 {DVBT_MGD_THD2, 0x20},
260 {DVBT_MGD_THD3, 0x40},
261 {DVBT_MGD_THD4, 0x22},
262 {DVBT_MGD_THD5, 0x32},
263 {DVBT_MGD_THD6, 0x37},
264 {DVBT_MGD_THD7, 0x39},
265 {DVBT_EN_BK_TRK, 0x0},
266 {DVBT_EN_CACQ_NOTCH, 0x0},
267 {DVBT_AD_AV_REF, 0x2a},
268 {DVBT_REG_PI, 0x6},
269 {DVBT_PIP_ON, 0x0},
270 {DVBT_CDIV_PH0, 0x8},
271 {DVBT_CDIV_PH1, 0x8},
272 {DVBT_SCALE1_B92, 0x4},
273 {DVBT_SCALE1_B93, 0xb0},
274 {DVBT_SCALE1_BA7, 0x78},
275 {DVBT_SCALE1_BA9, 0x28},
276 {DVBT_SCALE1_BAA, 0x59},
277 {DVBT_SCALE1_BAB, 0x83},
278 {DVBT_SCALE1_BAC, 0xd4},
279 {DVBT_SCALE1_BB0, 0x65},
280 {DVBT_SCALE1_BB1, 0x43},
281 {DVBT_KB_P1, 0x1},
282 {DVBT_KB_P2, 0x4},
283 {DVBT_KB_P3, 0x7},
284 {DVBT_K1_CR_STEP12, 0xa},
285 {DVBT_REG_GPE, 0x1},
286 {DVBT_SERIAL, 0x0},
287 {DVBT_CDIV_PH0, 0x9},
288 {DVBT_CDIV_PH1, 0x9},
289 {DVBT_MPEG_IO_OPT_2_2, 0x0},
290 {DVBT_MPEG_IO_OPT_1_0, 0x0},
291 {DVBT_TRK_KS_P2, 0x4},
292 {DVBT_TRK_KS_I2, 0x7},
293 {DVBT_TR_THD_SET2, 0x6},
294 {DVBT_TRK_KC_I2, 0x5},
295 {DVBT_CR_THD_SET2, 0x1},
296 };
297
298 dev_dbg(&client->dev, "\n");
299
300 ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
301 if (ret)
302 goto err;
303
304 for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
305 ret = rtl2832_wr_demod_reg(dev, rtl2832_initial_regs[i].reg,
306 rtl2832_initial_regs[i].value);
307 if (ret)
308 goto err;
309 }
310
311 /* load tuner specific settings */
312 dev_dbg(&client->dev, "load settings for tuner=%02x\n",
313 dev->pdata->tuner);
314 switch (dev->pdata->tuner) {
315 case RTL2832_TUNER_FC2580:
316 len = ARRAY_SIZE(rtl2832_tuner_init_fc2580);
317 init = rtl2832_tuner_init_fc2580;
318 break;
319 case RTL2832_TUNER_FC0012:
320 case RTL2832_TUNER_FC0013:
321 len = ARRAY_SIZE(rtl2832_tuner_init_fc0012);
322 init = rtl2832_tuner_init_fc0012;
323 break;
324 case RTL2832_TUNER_TUA9001:
325 len = ARRAY_SIZE(rtl2832_tuner_init_tua9001);
326 init = rtl2832_tuner_init_tua9001;
327 break;
328 case RTL2832_TUNER_E4000:
329 len = ARRAY_SIZE(rtl2832_tuner_init_e4000);
330 init = rtl2832_tuner_init_e4000;
331 break;
332 case RTL2832_TUNER_R820T:
333 case RTL2832_TUNER_R828D:
334 len = ARRAY_SIZE(rtl2832_tuner_init_r820t);
335 init = rtl2832_tuner_init_r820t;
336 break;
337 case RTL2832_TUNER_SI2157:
338 len = ARRAY_SIZE(rtl2832_tuner_init_si2157);
339 init = rtl2832_tuner_init_si2157;
340 break;
341 default:
342 ret = -EINVAL;
343 goto err;
344 }
345
346 for (i = 0; i < len; i++) {
347 ret = rtl2832_wr_demod_reg(dev, init[i].reg, init[i].value);
348 if (ret)
349 goto err;
350 }
351
352 /* init stats here in order signal app which stats are supported */
353 c->strength.len = 1;
354 c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
355 c->cnr.len = 1;
356 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
357 c->post_bit_error.len = 1;
358 c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
359 c->post_bit_count.len = 1;
360 c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
361 dev->sleeping = false;
362
363 return 0;
364 err:
365 dev_dbg(&client->dev, "failed=%d\n", ret);
366 return ret;
367 }
368
rtl2832_sleep(struct dvb_frontend * fe)369 static int rtl2832_sleep(struct dvb_frontend *fe)
370 {
371 struct rtl2832_dev *dev = fe->demodulator_priv;
372 struct i2c_client *client = dev->client;
373 int ret;
374
375 dev_dbg(&client->dev, "\n");
376
377 dev->sleeping = true;
378 dev->fe_status = 0;
379
380 ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
381 if (ret)
382 goto err;
383
384 return 0;
385 err:
386 dev_dbg(&client->dev, "failed=%d\n", ret);
387 return ret;
388 }
389
rtl2832_get_tune_settings(struct dvb_frontend * fe,struct dvb_frontend_tune_settings * s)390 static int rtl2832_get_tune_settings(struct dvb_frontend *fe,
391 struct dvb_frontend_tune_settings *s)
392 {
393 struct rtl2832_dev *dev = fe->demodulator_priv;
394 struct i2c_client *client = dev->client;
395
396 dev_dbg(&client->dev, "\n");
397 s->min_delay_ms = 1000;
398 s->step_size = fe->ops.info.frequency_stepsize_hz * 2;
399 s->max_drift = (fe->ops.info.frequency_stepsize_hz * 2) + 1;
400 return 0;
401 }
402
rtl2832_set_frontend(struct dvb_frontend * fe)403 static int rtl2832_set_frontend(struct dvb_frontend *fe)
404 {
405 struct rtl2832_dev *dev = fe->demodulator_priv;
406 struct i2c_client *client = dev->client;
407 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
408 int ret, i, j;
409 u64 bw_mode, num, num2;
410 u32 resamp_ratio, cfreq_off_ratio;
411 static u8 bw_params[3][32] = {
412 /* 6 MHz bandwidth */
413 {
414 0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
415 0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
416 0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
417 0x19, 0xe0,
418 },
419
420 /* 7 MHz bandwidth */
421 {
422 0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
423 0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
424 0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
425 0x19, 0x10,
426 },
427
428 /* 8 MHz bandwidth */
429 {
430 0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
431 0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
432 0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
433 0x19, 0xe0,
434 },
435 };
436
437 dev_dbg(&client->dev, "frequency=%u bandwidth_hz=%u inversion=%u\n",
438 c->frequency, c->bandwidth_hz, c->inversion);
439
440 /* program tuner */
441 if (fe->ops.tuner_ops.set_params)
442 fe->ops.tuner_ops.set_params(fe);
443
444 /* If the frontend has get_if_frequency(), use it */
445 if (fe->ops.tuner_ops.get_if_frequency) {
446 u32 if_freq;
447
448 ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
449 if (ret)
450 goto err;
451
452 ret = rtl2832_set_if(fe, if_freq);
453 if (ret)
454 goto err;
455 }
456
457 switch (c->bandwidth_hz) {
458 case 6000000:
459 i = 0;
460 bw_mode = 48000000;
461 break;
462 case 7000000:
463 i = 1;
464 bw_mode = 56000000;
465 break;
466 case 8000000:
467 i = 2;
468 bw_mode = 64000000;
469 break;
470 default:
471 dev_err(&client->dev, "invalid bandwidth_hz %u\n",
472 c->bandwidth_hz);
473 ret = -EINVAL;
474 goto err;
475 }
476
477 for (j = 0; j < sizeof(bw_params[0]); j++) {
478 ret = regmap_bulk_write(dev->regmap,
479 0x11c + j, &bw_params[i][j], 1);
480 if (ret)
481 goto err;
482 }
483
484 /* calculate and set resample ratio
485 * RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
486 * / ConstWithBandwidthMode)
487 */
488 num = dev->pdata->clk * 7ULL;
489 num *= 0x400000;
490 num = div_u64(num, bw_mode);
491 resamp_ratio = num & 0x3ffffff;
492 ret = rtl2832_wr_demod_reg(dev, DVBT_RSAMP_RATIO, resamp_ratio);
493 if (ret)
494 goto err;
495
496 /* calculate and set cfreq off ratio
497 * CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20)
498 * / (CrystalFreqHz * 7))
499 */
500 num = bw_mode << 20;
501 num2 = dev->pdata->clk * 7ULL;
502 num = div_u64(num, num2);
503 num = -num;
504 cfreq_off_ratio = num & 0xfffff;
505 ret = rtl2832_wr_demod_reg(dev, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
506 if (ret)
507 goto err;
508
509 /* soft reset */
510 ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
511 if (ret)
512 goto err;
513
514 ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
515 if (ret)
516 goto err;
517
518 return 0;
519 err:
520 dev_dbg(&client->dev, "failed=%d\n", ret);
521 return ret;
522 }
523
rtl2832_get_frontend(struct dvb_frontend * fe,struct dtv_frontend_properties * c)524 static int rtl2832_get_frontend(struct dvb_frontend *fe,
525 struct dtv_frontend_properties *c)
526 {
527 struct rtl2832_dev *dev = fe->demodulator_priv;
528 struct i2c_client *client = dev->client;
529 int ret;
530 u8 buf[3];
531
532 if (dev->sleeping)
533 return 0;
534
535 ret = regmap_bulk_read(dev->regmap, 0x33c, buf, 2);
536 if (ret)
537 goto err;
538
539 ret = regmap_bulk_read(dev->regmap, 0x351, &buf[2], 1);
540 if (ret)
541 goto err;
542
543 dev_dbg(&client->dev, "TPS=%*ph\n", 3, buf);
544
545 switch ((buf[0] >> 2) & 3) {
546 case 0:
547 c->modulation = QPSK;
548 break;
549 case 1:
550 c->modulation = QAM_16;
551 break;
552 case 2:
553 c->modulation = QAM_64;
554 break;
555 }
556
557 switch ((buf[2] >> 2) & 1) {
558 case 0:
559 c->transmission_mode = TRANSMISSION_MODE_2K;
560 break;
561 case 1:
562 c->transmission_mode = TRANSMISSION_MODE_8K;
563 }
564
565 switch ((buf[2] >> 0) & 3) {
566 case 0:
567 c->guard_interval = GUARD_INTERVAL_1_32;
568 break;
569 case 1:
570 c->guard_interval = GUARD_INTERVAL_1_16;
571 break;
572 case 2:
573 c->guard_interval = GUARD_INTERVAL_1_8;
574 break;
575 case 3:
576 c->guard_interval = GUARD_INTERVAL_1_4;
577 break;
578 }
579
580 switch ((buf[0] >> 4) & 7) {
581 case 0:
582 c->hierarchy = HIERARCHY_NONE;
583 break;
584 case 1:
585 c->hierarchy = HIERARCHY_1;
586 break;
587 case 2:
588 c->hierarchy = HIERARCHY_2;
589 break;
590 case 3:
591 c->hierarchy = HIERARCHY_4;
592 break;
593 }
594
595 switch ((buf[1] >> 3) & 7) {
596 case 0:
597 c->code_rate_HP = FEC_1_2;
598 break;
599 case 1:
600 c->code_rate_HP = FEC_2_3;
601 break;
602 case 2:
603 c->code_rate_HP = FEC_3_4;
604 break;
605 case 3:
606 c->code_rate_HP = FEC_5_6;
607 break;
608 case 4:
609 c->code_rate_HP = FEC_7_8;
610 break;
611 }
612
613 switch ((buf[1] >> 0) & 7) {
614 case 0:
615 c->code_rate_LP = FEC_1_2;
616 break;
617 case 1:
618 c->code_rate_LP = FEC_2_3;
619 break;
620 case 2:
621 c->code_rate_LP = FEC_3_4;
622 break;
623 case 3:
624 c->code_rate_LP = FEC_5_6;
625 break;
626 case 4:
627 c->code_rate_LP = FEC_7_8;
628 break;
629 }
630
631 return 0;
632 err:
633 dev_dbg(&client->dev, "failed=%d\n", ret);
634 return ret;
635 }
636
rtl2832_read_status(struct dvb_frontend * fe,enum fe_status * status)637 static int rtl2832_read_status(struct dvb_frontend *fe, enum fe_status *status)
638 {
639 struct rtl2832_dev *dev = fe->demodulator_priv;
640 struct i2c_client *client = dev->client;
641 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
642 int ret;
643 u32 tmp;
644 u8 u8tmp, buf[2];
645 u16 u16tmp;
646
647 dev_dbg(&client->dev, "\n");
648
649 *status = 0;
650 if (dev->sleeping)
651 return 0;
652
653 ret = rtl2832_rd_demod_reg(dev, DVBT_FSM_STAGE, &tmp);
654 if (ret)
655 goto err;
656
657 if (tmp == 11) {
658 *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
659 FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
660 } else if (tmp == 10) {
661 *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
662 FE_HAS_VITERBI;
663 }
664
665 dev->fe_status = *status;
666
667 /* signal strength */
668 if (dev->fe_status & FE_HAS_SIGNAL) {
669 /* read digital AGC */
670 ret = regmap_bulk_read(dev->regmap, 0x305, &u8tmp, 1);
671 if (ret)
672 goto err;
673
674 dev_dbg(&client->dev, "digital agc=%02x", u8tmp);
675
676 u8tmp = ~u8tmp;
677 u16tmp = u8tmp << 8 | u8tmp << 0;
678
679 c->strength.stat[0].scale = FE_SCALE_RELATIVE;
680 c->strength.stat[0].uvalue = u16tmp;
681 } else {
682 c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
683 }
684
685 /* CNR */
686 if (dev->fe_status & FE_HAS_VITERBI) {
687 unsigned hierarchy, constellation;
688 #define CONSTELLATION_NUM 3
689 #define HIERARCHY_NUM 4
690 static const u32 constant[CONSTELLATION_NUM][HIERARCHY_NUM] = {
691 {85387325, 85387325, 85387325, 85387325},
692 {86676178, 86676178, 87167949, 87795660},
693 {87659938, 87659938, 87885178, 88241743},
694 };
695
696 ret = regmap_bulk_read(dev->regmap, 0x33c, &u8tmp, 1);
697 if (ret)
698 goto err;
699
700 constellation = (u8tmp >> 2) & 0x03; /* [3:2] */
701 ret = -EINVAL;
702 if (constellation > CONSTELLATION_NUM - 1)
703 goto err;
704
705 hierarchy = (u8tmp >> 4) & 0x07; /* [6:4] */
706 if (hierarchy > HIERARCHY_NUM - 1)
707 goto err;
708
709 ret = regmap_bulk_read(dev->regmap, 0x40c, buf, 2);
710 if (ret)
711 goto err;
712
713 u16tmp = buf[0] << 8 | buf[1] << 0;
714 if (u16tmp)
715 tmp = (constant[constellation][hierarchy] -
716 intlog10(u16tmp)) / ((1 << 24) / 10000);
717 else
718 tmp = 0;
719
720 dev_dbg(&client->dev, "cnr raw=%u\n", u16tmp);
721
722 c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
723 c->cnr.stat[0].svalue = tmp;
724 } else {
725 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
726 }
727
728 /* BER */
729 if (dev->fe_status & FE_HAS_LOCK) {
730 ret = regmap_bulk_read(dev->regmap, 0x34e, buf, 2);
731 if (ret)
732 goto err;
733
734 u16tmp = buf[0] << 8 | buf[1] << 0;
735 dev->post_bit_error += u16tmp;
736 dev->post_bit_count += 1000000;
737
738 dev_dbg(&client->dev, "ber errors=%u total=1000000\n", u16tmp);
739
740 c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
741 c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
742 c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
743 c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
744 } else {
745 c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
746 c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
747 }
748
749 return 0;
750 err:
751 dev_dbg(&client->dev, "failed=%d\n", ret);
752 return ret;
753 }
754
rtl2832_read_snr(struct dvb_frontend * fe,u16 * snr)755 static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
756 {
757 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
758
759 /* report SNR in resolution of 0.1 dB */
760 if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL)
761 *snr = div_s64(c->cnr.stat[0].svalue, 100);
762 else
763 *snr = 0;
764
765 return 0;
766 }
767
rtl2832_read_ber(struct dvb_frontend * fe,u32 * ber)768 static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
769 {
770 struct rtl2832_dev *dev = fe->demodulator_priv;
771
772 *ber = (dev->post_bit_error - dev->post_bit_error_prev);
773 dev->post_bit_error_prev = dev->post_bit_error;
774
775 return 0;
776 }
777
778 /*
779 * I2C gate/mux/repeater logic
780 * There is delay mechanism to avoid unneeded I2C gate open / close. Gate close
781 * is delayed here a little bit in order to see if there is sequence of I2C
782 * messages sent to same I2C bus.
783 */
rtl2832_i2c_gate_work(struct work_struct * work)784 static void rtl2832_i2c_gate_work(struct work_struct *work)
785 {
786 struct rtl2832_dev *dev = container_of(work, struct rtl2832_dev, i2c_gate_work.work);
787 struct i2c_client *client = dev->client;
788 int ret;
789
790 /* close gate */
791 ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x00);
792 if (ret)
793 goto err;
794
795 return;
796 err:
797 dev_dbg(&client->dev, "failed=%d\n", ret);
798 }
799
rtl2832_select(struct i2c_mux_core * muxc,u32 chan_id)800 static int rtl2832_select(struct i2c_mux_core *muxc, u32 chan_id)
801 {
802 struct rtl2832_dev *dev = i2c_mux_priv(muxc);
803 struct i2c_client *client = dev->client;
804 int ret;
805
806 /* terminate possible gate closing */
807 cancel_delayed_work(&dev->i2c_gate_work);
808
809 /* open gate */
810 ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x08);
811 if (ret)
812 goto err;
813
814 return 0;
815 err:
816 dev_dbg(&client->dev, "failed=%d\n", ret);
817 return ret;
818 }
819
rtl2832_deselect(struct i2c_mux_core * muxc,u32 chan_id)820 static int rtl2832_deselect(struct i2c_mux_core *muxc, u32 chan_id)
821 {
822 struct rtl2832_dev *dev = i2c_mux_priv(muxc);
823
824 schedule_delayed_work(&dev->i2c_gate_work, usecs_to_jiffies(100));
825 return 0;
826 }
827
828 static const struct dvb_frontend_ops rtl2832_ops = {
829 .delsys = { SYS_DVBT },
830 .info = {
831 .name = "Realtek RTL2832 (DVB-T)",
832 .frequency_min_hz = 174 * MHz,
833 .frequency_max_hz = 862 * MHz,
834 .frequency_stepsize_hz = 166667,
835 .caps = FE_CAN_FEC_1_2 |
836 FE_CAN_FEC_2_3 |
837 FE_CAN_FEC_3_4 |
838 FE_CAN_FEC_5_6 |
839 FE_CAN_FEC_7_8 |
840 FE_CAN_FEC_AUTO |
841 FE_CAN_QPSK |
842 FE_CAN_QAM_16 |
843 FE_CAN_QAM_64 |
844 FE_CAN_QAM_AUTO |
845 FE_CAN_TRANSMISSION_MODE_AUTO |
846 FE_CAN_GUARD_INTERVAL_AUTO |
847 FE_CAN_HIERARCHY_AUTO |
848 FE_CAN_RECOVER |
849 FE_CAN_MUTE_TS
850 },
851
852 .init = rtl2832_init,
853 .sleep = rtl2832_sleep,
854
855 .get_tune_settings = rtl2832_get_tune_settings,
856
857 .set_frontend = rtl2832_set_frontend,
858 .get_frontend = rtl2832_get_frontend,
859
860 .read_status = rtl2832_read_status,
861 .read_snr = rtl2832_read_snr,
862 .read_ber = rtl2832_read_ber,
863 };
864
rtl2832_volatile_reg(struct device * dev,unsigned int reg)865 static bool rtl2832_volatile_reg(struct device *dev, unsigned int reg)
866 {
867 switch (reg) {
868 case 0x305:
869 case 0x33c:
870 case 0x34e:
871 case 0x351:
872 case 0x40c ... 0x40d:
873 return true;
874 default:
875 break;
876 }
877
878 return false;
879 }
880
rtl2832_get_dvb_frontend(struct i2c_client * client)881 static struct dvb_frontend *rtl2832_get_dvb_frontend(struct i2c_client *client)
882 {
883 struct rtl2832_dev *dev = i2c_get_clientdata(client);
884
885 dev_dbg(&client->dev, "\n");
886 return &dev->fe;
887 }
888
rtl2832_get_i2c_adapter(struct i2c_client * client)889 static struct i2c_adapter *rtl2832_get_i2c_adapter(struct i2c_client *client)
890 {
891 struct rtl2832_dev *dev = i2c_get_clientdata(client);
892
893 dev_dbg(&client->dev, "\n");
894 return dev->muxc->adapter[0];
895 }
896
rtl2832_slave_ts_ctrl(struct i2c_client * client,bool enable)897 static int rtl2832_slave_ts_ctrl(struct i2c_client *client, bool enable)
898 {
899 struct rtl2832_dev *dev = i2c_get_clientdata(client);
900 int ret;
901
902 dev_dbg(&client->dev, "enable=%d\n", enable);
903
904 if (enable) {
905 ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
906 if (ret)
907 goto err;
908 ret = regmap_bulk_write(dev->regmap, 0x10c, "\x5f\xff", 2);
909 if (ret)
910 goto err;
911 ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x1);
912 if (ret)
913 goto err;
914 ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x18", 1);
915 if (ret)
916 goto err;
917 ret = regmap_bulk_write(dev->regmap, 0x192, "\x7f\xf7\xff", 3);
918 if (ret)
919 goto err;
920 } else {
921 ret = regmap_bulk_write(dev->regmap, 0x192, "\x00\x0f\xff", 3);
922 if (ret)
923 goto err;
924 ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x08", 1);
925 if (ret)
926 goto err;
927 ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x0);
928 if (ret)
929 goto err;
930 ret = regmap_bulk_write(dev->regmap, 0x10c, "\x00\x00", 2);
931 if (ret)
932 goto err;
933 ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
934 if (ret)
935 goto err;
936 }
937
938 dev->slave_ts = enable;
939
940 return 0;
941 err:
942 dev_dbg(&client->dev, "failed=%d\n", ret);
943 return ret;
944 }
945
rtl2832_pid_filter_ctrl(struct dvb_frontend * fe,int onoff)946 static int rtl2832_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
947 {
948 struct rtl2832_dev *dev = fe->demodulator_priv;
949 struct i2c_client *client = dev->client;
950 int ret;
951 u8 u8tmp;
952
953 dev_dbg(&client->dev, "onoff=%d, slave_ts=%d\n", onoff, dev->slave_ts);
954
955 /* enable / disable PID filter */
956 if (onoff)
957 u8tmp = 0x80;
958 else
959 u8tmp = 0x00;
960
961 if (dev->slave_ts)
962 ret = regmap_update_bits(dev->regmap, 0x021, 0xc0, u8tmp);
963 else
964 ret = regmap_update_bits(dev->regmap, 0x061, 0xc0, u8tmp);
965 if (ret)
966 goto err;
967
968 return 0;
969 err:
970 dev_dbg(&client->dev, "failed=%d\n", ret);
971 return ret;
972 }
973
rtl2832_pid_filter(struct dvb_frontend * fe,u8 index,u16 pid,int onoff)974 static int rtl2832_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
975 int onoff)
976 {
977 struct rtl2832_dev *dev = fe->demodulator_priv;
978 struct i2c_client *client = dev->client;
979 int ret;
980 u8 buf[4];
981
982 dev_dbg(&client->dev, "index=%d pid=%04x onoff=%d slave_ts=%d\n",
983 index, pid, onoff, dev->slave_ts);
984
985 /* skip invalid PIDs (0x2000) */
986 if (pid > 0x1fff || index > 32)
987 return 0;
988
989 if (onoff)
990 set_bit(index, &dev->filters);
991 else
992 clear_bit(index, &dev->filters);
993
994 /* enable / disable PIDs */
995 buf[0] = (dev->filters >> 0) & 0xff;
996 buf[1] = (dev->filters >> 8) & 0xff;
997 buf[2] = (dev->filters >> 16) & 0xff;
998 buf[3] = (dev->filters >> 24) & 0xff;
999
1000 if (dev->slave_ts)
1001 ret = regmap_bulk_write(dev->regmap, 0x022, buf, 4);
1002 else
1003 ret = regmap_bulk_write(dev->regmap, 0x062, buf, 4);
1004 if (ret)
1005 goto err;
1006
1007 /* add PID */
1008 buf[0] = (pid >> 8) & 0xff;
1009 buf[1] = (pid >> 0) & 0xff;
1010
1011 if (dev->slave_ts)
1012 ret = regmap_bulk_write(dev->regmap, 0x026 + 2 * index, buf, 2);
1013 else
1014 ret = regmap_bulk_write(dev->regmap, 0x066 + 2 * index, buf, 2);
1015 if (ret)
1016 goto err;
1017
1018 return 0;
1019 err:
1020 dev_dbg(&client->dev, "failed=%d\n", ret);
1021 return ret;
1022 }
1023
rtl2832_probe(struct i2c_client * client,const struct i2c_device_id * id)1024 static int rtl2832_probe(struct i2c_client *client,
1025 const struct i2c_device_id *id)
1026 {
1027 struct rtl2832_platform_data *pdata = client->dev.platform_data;
1028 struct i2c_adapter *i2c = client->adapter;
1029 struct rtl2832_dev *dev;
1030 int ret;
1031 u8 tmp;
1032 static const struct regmap_range_cfg regmap_range_cfg[] = {
1033 {
1034 .selector_reg = 0x00,
1035 .selector_mask = 0xff,
1036 .selector_shift = 0,
1037 .window_start = 0,
1038 .window_len = 0x100,
1039 .range_min = 0 * 0x100,
1040 .range_max = 5 * 0x100,
1041 },
1042 };
1043
1044 dev_dbg(&client->dev, "\n");
1045
1046 /* allocate memory for the internal state */
1047 dev = kzalloc(sizeof(struct rtl2832_dev), GFP_KERNEL);
1048 if (dev == NULL) {
1049 ret = -ENOMEM;
1050 goto err;
1051 }
1052
1053 /* setup the state */
1054 i2c_set_clientdata(client, dev);
1055 dev->client = client;
1056 dev->pdata = client->dev.platform_data;
1057 dev->sleeping = true;
1058 INIT_DELAYED_WORK(&dev->i2c_gate_work, rtl2832_i2c_gate_work);
1059 /* create regmap */
1060 dev->regmap_config.reg_bits = 8;
1061 dev->regmap_config.val_bits = 8;
1062 dev->regmap_config.volatile_reg = rtl2832_volatile_reg;
1063 dev->regmap_config.max_register = 5 * 0x100;
1064 dev->regmap_config.ranges = regmap_range_cfg;
1065 dev->regmap_config.num_ranges = ARRAY_SIZE(regmap_range_cfg);
1066 dev->regmap_config.cache_type = REGCACHE_NONE;
1067 dev->regmap = regmap_init_i2c(client, &dev->regmap_config);
1068 if (IS_ERR(dev->regmap)) {
1069 ret = PTR_ERR(dev->regmap);
1070 goto err_kfree;
1071 }
1072
1073 /* check if the demod is there */
1074 ret = regmap_bulk_read(dev->regmap, 0x000, &tmp, 1);
1075 if (ret)
1076 goto err_regmap_exit;
1077
1078 /* create muxed i2c adapter for demod tuner bus */
1079 dev->muxc = i2c_mux_alloc(i2c, &i2c->dev, 1, 0, I2C_MUX_LOCKED,
1080 rtl2832_select, rtl2832_deselect);
1081 if (!dev->muxc) {
1082 ret = -ENOMEM;
1083 goto err_regmap_exit;
1084 }
1085 dev->muxc->priv = dev;
1086 ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
1087 if (ret)
1088 goto err_regmap_exit;
1089
1090 /* create dvb_frontend */
1091 memcpy(&dev->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
1092 dev->fe.demodulator_priv = dev;
1093
1094 /* setup callbacks */
1095 pdata->get_dvb_frontend = rtl2832_get_dvb_frontend;
1096 pdata->get_i2c_adapter = rtl2832_get_i2c_adapter;
1097 pdata->slave_ts_ctrl = rtl2832_slave_ts_ctrl;
1098 pdata->pid_filter = rtl2832_pid_filter;
1099 pdata->pid_filter_ctrl = rtl2832_pid_filter_ctrl;
1100 pdata->regmap = dev->regmap;
1101
1102 dev_info(&client->dev, "Realtek RTL2832 successfully attached\n");
1103 return 0;
1104 err_regmap_exit:
1105 regmap_exit(dev->regmap);
1106 err_kfree:
1107 kfree(dev);
1108 err:
1109 dev_dbg(&client->dev, "failed=%d\n", ret);
1110 return ret;
1111 }
1112
rtl2832_remove(struct i2c_client * client)1113 static void rtl2832_remove(struct i2c_client *client)
1114 {
1115 struct rtl2832_dev *dev = i2c_get_clientdata(client);
1116
1117 dev_dbg(&client->dev, "\n");
1118
1119 cancel_delayed_work_sync(&dev->i2c_gate_work);
1120
1121 i2c_mux_del_adapters(dev->muxc);
1122
1123 regmap_exit(dev->regmap);
1124
1125 kfree(dev);
1126 }
1127
1128 static const struct i2c_device_id rtl2832_id_table[] = {
1129 {"rtl2832", 0},
1130 {}
1131 };
1132 MODULE_DEVICE_TABLE(i2c, rtl2832_id_table);
1133
1134 static struct i2c_driver rtl2832_driver = {
1135 .driver = {
1136 .name = "rtl2832",
1137 .suppress_bind_attrs = true,
1138 },
1139 .probe = rtl2832_probe,
1140 .remove = rtl2832_remove,
1141 .id_table = rtl2832_id_table,
1142 };
1143
1144 module_i2c_driver(rtl2832_driver);
1145
1146 MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>");
1147 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
1148 MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
1149 MODULE_LICENSE("GPL");
1150