1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *    Support for OR51132 (pcHDTV HD-3000) - VSB/QAM
4  *
5  *    Copyright (C) 2007 Trent Piepho <xyzzy@speakeasy.org>
6  *
7  *    Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
8  *
9  *    Based on code from Jack Kelliher (kelliher@xmission.com)
10  *                           Copyright (C) 2002 & pcHDTV, inc.
11 */
12 
13 /*
14  * This driver needs two external firmware files. Please copy
15  * "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to
16  * /usr/lib/hotplug/firmware/ or /lib/firmware/
17  * (depending on configuration of firmware hotplug).
18  */
19 #define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw"
20 #define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw"
21 
22 #include <linux/kernel.h>
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/delay.h>
26 #include <linux/string.h>
27 #include <linux/slab.h>
28 #include <asm/byteorder.h>
29 
30 #include <media/dvb_math.h>
31 #include <media/dvb_frontend.h>
32 #include "or51132.h"
33 
34 static int debug;
35 #define dprintk(args...) \
36 	do { \
37 		if (debug) printk(KERN_DEBUG "or51132: " args); \
38 	} while (0)
39 
40 
41 struct or51132_state
42 {
43 	struct i2c_adapter* i2c;
44 
45 	/* Configuration settings */
46 	const struct or51132_config* config;
47 
48 	struct dvb_frontend frontend;
49 
50 	/* Demodulator private data */
51 	enum fe_modulation current_modulation;
52 	u32 snr; /* Result of last SNR calculation */
53 
54 	/* Tuner private data */
55 	u32 current_frequency;
56 };
57 
58 
59 /* Write buffer to demod */
or51132_writebuf(struct or51132_state * state,const u8 * buf,int len)60 static int or51132_writebuf(struct or51132_state *state, const u8 *buf, int len)
61 {
62 	int err;
63 	struct i2c_msg msg = { .addr = state->config->demod_address,
64 			       .flags = 0, .buf = (u8*)buf, .len = len };
65 
66 	/* msleep(20); */ /* doesn't appear to be necessary */
67 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
68 		printk(KERN_WARNING "or51132: I2C write (addr 0x%02x len %d) error: %d\n",
69 		       msg.addr, msg.len, err);
70 		return -EREMOTEIO;
71 	}
72 	return 0;
73 }
74 
75 /* Write constant bytes, e.g. or51132_writebytes(state, 0x04, 0x42, 0x00);
76    Less code and more efficient that loading a buffer on the stack with
77    the bytes to send and then calling or51132_writebuf() on that. */
78 #define or51132_writebytes(state, data...)  \
79 	({ static const u8 _data[] = {data}; \
80 	or51132_writebuf(state, _data, sizeof(_data)); })
81 
82 /* Read data from demod into buffer.  Returns 0 on success. */
or51132_readbuf(struct or51132_state * state,u8 * buf,int len)83 static int or51132_readbuf(struct or51132_state *state, u8 *buf, int len)
84 {
85 	int err;
86 	struct i2c_msg msg = { .addr = state->config->demod_address,
87 			       .flags = I2C_M_RD, .buf = buf, .len = len };
88 
89 	/* msleep(20); */ /* doesn't appear to be necessary */
90 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
91 		printk(KERN_WARNING "or51132: I2C read (addr 0x%02x len %d) error: %d\n",
92 		       msg.addr, msg.len, err);
93 		return -EREMOTEIO;
94 	}
95 	return 0;
96 }
97 
98 /* Reads a 16-bit demod register.  Returns <0 on error. */
or51132_readreg(struct or51132_state * state,u8 reg)99 static int or51132_readreg(struct or51132_state *state, u8 reg)
100 {
101 	u8 buf[2] = { 0x04, reg };
102 	struct i2c_msg msg[2] = {
103 		{.addr = state->config->demod_address, .flags = 0,
104 		 .buf = buf, .len = 2 },
105 		{.addr = state->config->demod_address, .flags = I2C_M_RD,
106 		 .buf = buf, .len = 2 }};
107 	int err;
108 
109 	if ((err = i2c_transfer(state->i2c, msg, 2)) != 2) {
110 		printk(KERN_WARNING "or51132: I2C error reading register %d: %d\n",
111 		       reg, err);
112 		return -EREMOTEIO;
113 	}
114 	return buf[0] | (buf[1] << 8);
115 }
116 
or51132_load_firmware(struct dvb_frontend * fe,const struct firmware * fw)117 static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
118 {
119 	struct or51132_state* state = fe->demodulator_priv;
120 	static const u8 run_buf[] = {0x7F,0x01};
121 	u8 rec_buf[8];
122 	u32 firmwareAsize, firmwareBsize;
123 	int i,ret;
124 
125 	dprintk("Firmware is %zd bytes\n",fw->size);
126 
127 	/* Get size of firmware A and B */
128 	firmwareAsize = le32_to_cpu(*((__le32*)fw->data));
129 	dprintk("FirmwareA is %i bytes\n",firmwareAsize);
130 	firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4)));
131 	dprintk("FirmwareB is %i bytes\n",firmwareBsize);
132 
133 	/* Upload firmware */
134 	if ((ret = or51132_writebuf(state, &fw->data[8], firmwareAsize))) {
135 		printk(KERN_WARNING "or51132: load_firmware error 1\n");
136 		return ret;
137 	}
138 	if ((ret = or51132_writebuf(state, &fw->data[8+firmwareAsize],
139 				    firmwareBsize))) {
140 		printk(KERN_WARNING "or51132: load_firmware error 2\n");
141 		return ret;
142 	}
143 
144 	if ((ret = or51132_writebuf(state, run_buf, 2))) {
145 		printk(KERN_WARNING "or51132: load_firmware error 3\n");
146 		return ret;
147 	}
148 	if ((ret = or51132_writebuf(state, run_buf, 2))) {
149 		printk(KERN_WARNING "or51132: load_firmware error 4\n");
150 		return ret;
151 	}
152 
153 	/* 50ms for operation to begin */
154 	msleep(50);
155 
156 	/* Read back ucode version to besure we loaded correctly and are really up and running */
157 	/* Get uCode version */
158 	if ((ret = or51132_writebytes(state, 0x10, 0x10, 0x00))) {
159 		printk(KERN_WARNING "or51132: load_firmware error a\n");
160 		return ret;
161 	}
162 	if ((ret = or51132_writebytes(state, 0x04, 0x17))) {
163 		printk(KERN_WARNING "or51132: load_firmware error b\n");
164 		return ret;
165 	}
166 	if ((ret = or51132_writebytes(state, 0x00, 0x00))) {
167 		printk(KERN_WARNING "or51132: load_firmware error c\n");
168 		return ret;
169 	}
170 	for (i=0;i<4;i++) {
171 		/* Once upon a time, this command might have had something
172 		   to do with getting the firmware version, but it's
173 		   not used anymore:
174 		   {0x04,0x00,0x30,0x00,i+1} */
175 		/* Read 8 bytes, two bytes at a time */
176 		if ((ret = or51132_readbuf(state, &rec_buf[i*2], 2))) {
177 			printk(KERN_WARNING
178 			       "or51132: load_firmware error d - %d\n",i);
179 			return ret;
180 		}
181 	}
182 
183 	printk(KERN_WARNING
184 	       "or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n",
185 	       rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2],
186 	       rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6],
187 	       rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f,
188 	       rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f);
189 
190 	if ((ret = or51132_writebytes(state, 0x10, 0x00, 0x00))) {
191 		printk(KERN_WARNING "or51132: load_firmware error e\n");
192 		return ret;
193 	}
194 	return 0;
195 };
196 
or51132_init(struct dvb_frontend * fe)197 static int or51132_init(struct dvb_frontend* fe)
198 {
199 	return 0;
200 }
201 
or51132_read_ber(struct dvb_frontend * fe,u32 * ber)202 static int or51132_read_ber(struct dvb_frontend* fe, u32* ber)
203 {
204 	*ber = 0;
205 	return 0;
206 }
207 
or51132_read_ucblocks(struct dvb_frontend * fe,u32 * ucblocks)208 static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
209 {
210 	*ucblocks = 0;
211 	return 0;
212 }
213 
or51132_sleep(struct dvb_frontend * fe)214 static int or51132_sleep(struct dvb_frontend* fe)
215 {
216 	return 0;
217 }
218 
or51132_setmode(struct dvb_frontend * fe)219 static int or51132_setmode(struct dvb_frontend* fe)
220 {
221 	struct or51132_state* state = fe->demodulator_priv;
222 	u8 cmd_buf1[3] = {0x04, 0x01, 0x5f};
223 	u8 cmd_buf2[3] = {0x1c, 0x00, 0 };
224 
225 	dprintk("setmode %d\n",(int)state->current_modulation);
226 
227 	switch (state->current_modulation) {
228 	case VSB_8:
229 		/* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high */
230 		cmd_buf1[2] = 0x50;
231 		/* REC MODE inv IF spectrum, Normal */
232 		cmd_buf2[1] = 0x03;
233 		/* Channel MODE ATSC/VSB8 */
234 		cmd_buf2[2] = 0x06;
235 		break;
236 	/* All QAM modes are:
237 	   Auto-deinterleave; MPEGser, MPEG2tr, phase noise-high
238 	   REC MODE Normal Carrier Lock */
239 	case QAM_AUTO:
240 		/* Channel MODE Auto QAM64/256 */
241 		cmd_buf2[2] = 0x4f;
242 		break;
243 	case QAM_256:
244 		/* Channel MODE QAM256 */
245 		cmd_buf2[2] = 0x45;
246 		break;
247 	case QAM_64:
248 		/* Channel MODE QAM64 */
249 		cmd_buf2[2] = 0x43;
250 		break;
251 	default:
252 		printk(KERN_WARNING
253 		       "or51132: setmode: Modulation set to unsupported value (%d)\n",
254 		       state->current_modulation);
255 		return -EINVAL;
256 	}
257 
258 	/* Set Receiver 1 register */
259 	if (or51132_writebuf(state, cmd_buf1, 3)) {
260 		printk(KERN_WARNING "or51132: set_mode error 1\n");
261 		return -EREMOTEIO;
262 	}
263 	dprintk("set #1 to %02x\n", cmd_buf1[2]);
264 
265 	/* Set operation mode in Receiver 6 register */
266 	if (or51132_writebuf(state, cmd_buf2, 3)) {
267 		printk(KERN_WARNING "or51132: set_mode error 2\n");
268 		return -EREMOTEIO;
269 	}
270 	dprintk("set #6 to 0x%02x%02x\n", cmd_buf2[1], cmd_buf2[2]);
271 
272 	return 0;
273 }
274 
275 /* Some modulations use the same firmware.  This classifies modulations
276    by the firmware they use. */
277 #define MOD_FWCLASS_UNKNOWN	0
278 #define MOD_FWCLASS_VSB		1
279 #define MOD_FWCLASS_QAM		2
modulation_fw_class(enum fe_modulation modulation)280 static int modulation_fw_class(enum fe_modulation modulation)
281 {
282 	switch(modulation) {
283 	case VSB_8:
284 		return MOD_FWCLASS_VSB;
285 	case QAM_AUTO:
286 	case QAM_64:
287 	case QAM_256:
288 		return MOD_FWCLASS_QAM;
289 	default:
290 		return MOD_FWCLASS_UNKNOWN;
291 	}
292 }
293 
or51132_set_parameters(struct dvb_frontend * fe)294 static int or51132_set_parameters(struct dvb_frontend *fe)
295 {
296 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
297 	int ret;
298 	struct or51132_state* state = fe->demodulator_priv;
299 	const struct firmware *fw;
300 	const char *fwname;
301 	int clock_mode;
302 
303 	/* Upload new firmware only if we need a different one */
304 	if (modulation_fw_class(state->current_modulation) !=
305 	    modulation_fw_class(p->modulation)) {
306 		switch (modulation_fw_class(p->modulation)) {
307 		case MOD_FWCLASS_VSB:
308 			dprintk("set_parameters VSB MODE\n");
309 			fwname = OR51132_VSB_FIRMWARE;
310 
311 			/* Set non-punctured clock for VSB */
312 			clock_mode = 0;
313 			break;
314 		case MOD_FWCLASS_QAM:
315 			dprintk("set_parameters QAM MODE\n");
316 			fwname = OR51132_QAM_FIRMWARE;
317 
318 			/* Set punctured clock for QAM */
319 			clock_mode = 1;
320 			break;
321 		default:
322 			printk("or51132: Modulation type(%d) UNSUPPORTED\n",
323 			       p->modulation);
324 			return -1;
325 		}
326 		printk("or51132: Waiting for firmware upload(%s)...\n",
327 		       fwname);
328 		ret = request_firmware(&fw, fwname, state->i2c->dev.parent);
329 		if (ret) {
330 			printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n");
331 			return ret;
332 		}
333 		ret = or51132_load_firmware(fe, fw);
334 		release_firmware(fw);
335 		if (ret) {
336 			printk(KERN_WARNING "or51132: Writing firmware to device failed!\n");
337 			return ret;
338 		}
339 		printk("or51132: Firmware upload complete.\n");
340 		state->config->set_ts_params(fe, clock_mode);
341 	}
342 	/* Change only if we are actually changing the modulation */
343 	if (state->current_modulation != p->modulation) {
344 		state->current_modulation = p->modulation;
345 		or51132_setmode(fe);
346 	}
347 
348 	if (fe->ops.tuner_ops.set_params) {
349 		fe->ops.tuner_ops.set_params(fe);
350 		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
351 	}
352 
353 	/* Set to current mode */
354 	or51132_setmode(fe);
355 
356 	/* Update current frequency */
357 	state->current_frequency = p->frequency;
358 	return 0;
359 }
360 
or51132_get_parameters(struct dvb_frontend * fe,struct dtv_frontend_properties * p)361 static int or51132_get_parameters(struct dvb_frontend* fe,
362 				  struct dtv_frontend_properties *p)
363 {
364 	struct or51132_state* state = fe->demodulator_priv;
365 	int status;
366 	int retry = 1;
367 
368 start:
369 	/* Receiver Status */
370 	if ((status = or51132_readreg(state, 0x00)) < 0) {
371 		printk(KERN_WARNING "or51132: get_parameters: error reading receiver status\n");
372 		return -EREMOTEIO;
373 	}
374 	switch(status&0xff) {
375 	case 0x06:
376 		p->modulation = VSB_8;
377 		break;
378 	case 0x43:
379 		p->modulation = QAM_64;
380 		break;
381 	case 0x45:
382 		p->modulation = QAM_256;
383 		break;
384 	default:
385 		if (retry--)
386 			goto start;
387 		printk(KERN_WARNING "or51132: unknown status 0x%02x\n",
388 		       status&0xff);
389 		return -EREMOTEIO;
390 	}
391 
392 	/* FIXME: Read frequency from frontend, take AFC into account */
393 	p->frequency = state->current_frequency;
394 
395 	/* FIXME: How to read inversion setting? Receiver 6 register? */
396 	p->inversion = INVERSION_AUTO;
397 
398 	return 0;
399 }
400 
or51132_read_status(struct dvb_frontend * fe,enum fe_status * status)401 static int or51132_read_status(struct dvb_frontend *fe, enum fe_status *status)
402 {
403 	struct or51132_state* state = fe->demodulator_priv;
404 	int reg;
405 
406 	/* Receiver Status */
407 	if ((reg = or51132_readreg(state, 0x00)) < 0) {
408 		printk(KERN_WARNING "or51132: read_status: error reading receiver status: %d\n", reg);
409 		*status = 0;
410 		return -EREMOTEIO;
411 	}
412 	dprintk("%s: read_status %04x\n", __func__, reg);
413 
414 	if (reg & 0x0100) /* Receiver Lock */
415 		*status = FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|
416 			  FE_HAS_SYNC|FE_HAS_LOCK;
417 	else
418 		*status = 0;
419 	return 0;
420 }
421 
422 /* Calculate SNR estimation (scaled by 2^24)
423 
424    8-VSB SNR and QAM equations from Oren datasheets
425 
426    For 8-VSB:
427      SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) - K
428 
429      Where K = 0 if NTSC rejection filter is OFF; and
430 	   K = 3 if NTSC rejection filter is ON
431 
432    For QAM64:
433      SNR[dB] = 10 * log10(897152044.8282 / MSE^2 )
434 
435    For QAM256:
436      SNR[dB] = 10 * log10(907832426.314266  / MSE^2 )
437 
438    We re-write the snr equation as:
439      SNR * 2^24 = 10*(c - 2*intlog10(MSE))
440    Where for QAM256, c = log10(907832426.314266) * 2^24
441    and for 8-VSB and QAM64, c = log10(897152044.8282) * 2^24 */
442 
calculate_snr(u32 mse,u32 c)443 static u32 calculate_snr(u32 mse, u32 c)
444 {
445 	if (mse == 0) /* No signal */
446 		return 0;
447 
448 	mse = 2*intlog10(mse);
449 	if (mse > c) {
450 		/* Negative SNR, which is possible, but realisticly the
451 		demod will lose lock before the signal gets this bad.  The
452 		API only allows for unsigned values, so just return 0 */
453 		return 0;
454 	}
455 	return 10*(c - mse);
456 }
457 
or51132_read_snr(struct dvb_frontend * fe,u16 * snr)458 static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
459 {
460 	struct or51132_state* state = fe->demodulator_priv;
461 	int noise, reg;
462 	u32 c, usK = 0;
463 	int retry = 1;
464 
465 start:
466 	/* SNR after Equalizer */
467 	noise = or51132_readreg(state, 0x02);
468 	if (noise < 0) {
469 		printk(KERN_WARNING "or51132: read_snr: error reading equalizer\n");
470 		return -EREMOTEIO;
471 	}
472 	dprintk("read_snr noise (%d)\n", noise);
473 
474 	/* Read status, contains modulation type for QAM_AUTO and
475 	   NTSC filter for VSB */
476 	reg = or51132_readreg(state, 0x00);
477 	if (reg < 0) {
478 		printk(KERN_WARNING "or51132: read_snr: error reading receiver status\n");
479 		return -EREMOTEIO;
480 	}
481 
482 	switch (reg&0xff) {
483 	case 0x06:
484 		if (reg & 0x1000) usK = 3 << 24;
485 		fallthrough;
486 	case 0x43: /* QAM64 */
487 		c = 150204167;
488 		break;
489 	case 0x45:
490 		c = 150290396;
491 		break;
492 	default:
493 		printk(KERN_WARNING "or51132: unknown status 0x%02x\n", reg&0xff);
494 		if (retry--) goto start;
495 		return -EREMOTEIO;
496 	}
497 	dprintk("%s: modulation %02x, NTSC rej O%s\n", __func__,
498 		reg&0xff, reg&0x1000?"n":"ff");
499 
500 	/* Calculate SNR using noise, c, and NTSC rejection correction */
501 	state->snr = calculate_snr(noise, c) - usK;
502 	*snr = (state->snr) >> 16;
503 
504 	dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise,
505 		state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
506 
507 	return 0;
508 }
509 
or51132_read_signal_strength(struct dvb_frontend * fe,u16 * strength)510 static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
511 {
512 	/* Calculate Strength from SNR up to 35dB */
513 	/* Even though the SNR can go higher than 35dB, there is some comfort */
514 	/* factor in having a range of strong signals that can show at 100%   */
515 	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
516 	u16 snr;
517 	int ret;
518 
519 	ret = fe->ops.read_snr(fe, &snr);
520 	if (ret != 0)
521 		return ret;
522 	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
523 	/* scale the range 0 - 35*2^24 into 0 - 65535 */
524 	if (state->snr >= 8960 * 0x10000)
525 		*strength = 0xffff;
526 	else
527 		*strength = state->snr / 8960;
528 
529 	return 0;
530 }
531 
or51132_get_tune_settings(struct dvb_frontend * fe,struct dvb_frontend_tune_settings * fe_tune_settings)532 static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
533 {
534 	fe_tune_settings->min_delay_ms = 500;
535 	fe_tune_settings->step_size = 0;
536 	fe_tune_settings->max_drift = 0;
537 
538 	return 0;
539 }
540 
or51132_release(struct dvb_frontend * fe)541 static void or51132_release(struct dvb_frontend* fe)
542 {
543 	struct or51132_state* state = fe->demodulator_priv;
544 	kfree(state);
545 }
546 
547 static const struct dvb_frontend_ops or51132_ops;
548 
or51132_attach(const struct or51132_config * config,struct i2c_adapter * i2c)549 struct dvb_frontend* or51132_attach(const struct or51132_config* config,
550 				    struct i2c_adapter* i2c)
551 {
552 	struct or51132_state* state = NULL;
553 
554 	/* Allocate memory for the internal state */
555 	state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL);
556 	if (state == NULL)
557 		return NULL;
558 
559 	/* Setup the state */
560 	state->config = config;
561 	state->i2c = i2c;
562 	state->current_frequency = -1;
563 	state->current_modulation = -1;
564 
565 	/* Create dvb_frontend */
566 	memcpy(&state->frontend.ops, &or51132_ops, sizeof(struct dvb_frontend_ops));
567 	state->frontend.demodulator_priv = state;
568 	return &state->frontend;
569 }
570 
571 static const struct dvb_frontend_ops or51132_ops = {
572 	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
573 	.info = {
574 		.name			= "Oren OR51132 VSB/QAM Frontend",
575 		.frequency_min_hz	=  44 * MHz,
576 		.frequency_max_hz	= 958 * MHz,
577 		.frequency_stepsize_hz	= 166666,
578 		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
579 			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
580 			FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO |
581 			FE_CAN_8VSB
582 	},
583 
584 	.release = or51132_release,
585 
586 	.init = or51132_init,
587 	.sleep = or51132_sleep,
588 
589 	.set_frontend = or51132_set_parameters,
590 	.get_frontend = or51132_get_parameters,
591 	.get_tune_settings = or51132_get_tune_settings,
592 
593 	.read_status = or51132_read_status,
594 	.read_ber = or51132_read_ber,
595 	.read_signal_strength = or51132_read_signal_strength,
596 	.read_snr = or51132_read_snr,
597 	.read_ucblocks = or51132_read_ucblocks,
598 };
599 
600 module_param(debug, int, 0644);
601 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
602 
603 MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver");
604 MODULE_AUTHOR("Kirk Lapray");
605 MODULE_AUTHOR("Trent Piepho");
606 MODULE_LICENSE("GPL");
607 
608 EXPORT_SYMBOL(or51132_attach);
609