1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * HID driver for Sony / PS2 / PS3 / PS4 BD devices.
4 *
5 * Copyright (c) 1999 Andreas Gal
6 * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
7 * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
8 * Copyright (c) 2008 Jiri Slaby
9 * Copyright (c) 2012 David Dillow <dave@thedillows.org>
10 * Copyright (c) 2006-2013 Jiri Kosina
11 * Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
12 * Copyright (c) 2014-2016 Frank Praznik <frank.praznik@gmail.com>
13 * Copyright (c) 2018 Todd Kelner
14 * Copyright (c) 2020-2021 Pascal Giard <pascal.giard@etsmtl.ca>
15 * Copyright (c) 2020 Sanjay Govind <sanjay.govind9@gmail.com>
16 * Copyright (c) 2021 Daniel Nguyen <daniel.nguyen.1@ens.etsmtl.ca>
17 */
18
19 /*
20 */
21
22 /*
23 * NOTE: in order for the Sony PS3 BD Remote Control to be found by
24 * a Bluetooth host, the key combination Start+Enter has to be kept pressed
25 * for about 7 seconds with the Bluetooth Host Controller in discovering mode.
26 *
27 * There will be no PIN request from the device.
28 */
29
30 #include <linux/device.h>
31 #include <linux/hid.h>
32 #include <linux/module.h>
33 #include <linux/slab.h>
34 #include <linux/leds.h>
35 #include <linux/power_supply.h>
36 #include <linux/spinlock.h>
37 #include <linux/list.h>
38 #include <linux/idr.h>
39 #include <linux/input/mt.h>
40 #include <linux/crc32.h>
41 #include <linux/usb.h>
42 #include <linux/timer.h>
43 #include <asm/unaligned.h>
44
45 #include "hid-ids.h"
46
47 #define VAIO_RDESC_CONSTANT BIT(0)
48 #define SIXAXIS_CONTROLLER_USB BIT(1)
49 #define SIXAXIS_CONTROLLER_BT BIT(2)
50 #define BUZZ_CONTROLLER BIT(3)
51 #define PS3REMOTE BIT(4)
52 #define DUALSHOCK4_CONTROLLER_USB BIT(5)
53 #define DUALSHOCK4_CONTROLLER_BT BIT(6)
54 #define DUALSHOCK4_DONGLE BIT(7)
55 #define MOTION_CONTROLLER_USB BIT(8)
56 #define MOTION_CONTROLLER_BT BIT(9)
57 #define NAVIGATION_CONTROLLER_USB BIT(10)
58 #define NAVIGATION_CONTROLLER_BT BIT(11)
59 #define SINO_LITE_CONTROLLER BIT(12)
60 #define FUTUREMAX_DANCE_MAT BIT(13)
61 #define NSG_MR5U_REMOTE_BT BIT(14)
62 #define NSG_MR7U_REMOTE_BT BIT(15)
63 #define SHANWAN_GAMEPAD BIT(16)
64 #define GH_GUITAR_CONTROLLER BIT(17)
65 #define GHL_GUITAR_PS3WIIU BIT(18)
66 #define GHL_GUITAR_PS4 BIT(19)
67
68 #define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
69 #define MOTION_CONTROLLER (MOTION_CONTROLLER_USB | MOTION_CONTROLLER_BT)
70 #define NAVIGATION_CONTROLLER (NAVIGATION_CONTROLLER_USB |\
71 NAVIGATION_CONTROLLER_BT)
72 #define DUALSHOCK4_CONTROLLER (DUALSHOCK4_CONTROLLER_USB |\
73 DUALSHOCK4_CONTROLLER_BT | \
74 DUALSHOCK4_DONGLE)
75 #define SONY_LED_SUPPORT (SIXAXIS_CONTROLLER | BUZZ_CONTROLLER |\
76 DUALSHOCK4_CONTROLLER | MOTION_CONTROLLER |\
77 NAVIGATION_CONTROLLER)
78 #define SONY_BATTERY_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER |\
79 MOTION_CONTROLLER_BT | NAVIGATION_CONTROLLER)
80 #define SONY_FF_SUPPORT (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER |\
81 MOTION_CONTROLLER)
82 #define SONY_BT_DEVICE (SIXAXIS_CONTROLLER_BT | DUALSHOCK4_CONTROLLER_BT |\
83 MOTION_CONTROLLER_BT | NAVIGATION_CONTROLLER_BT)
84 #define NSG_MRXU_REMOTE (NSG_MR5U_REMOTE_BT | NSG_MR7U_REMOTE_BT)
85
86 #define MAX_LEDS 4
87 #define NSG_MRXU_MAX_X 1667
88 #define NSG_MRXU_MAX_Y 1868
89
90 /* The PS3/Wii U dongles require a poke every 10 seconds, but the PS4
91 * requires one every 8 seconds. Using 8 seconds for all for simplicity.
92 */
93 #define GHL_GUITAR_POKE_INTERVAL 8 /* In seconds */
94 #define GUITAR_TILT_USAGE 44
95
96 /* Magic data taken from GHLtarUtility:
97 * https://github.com/ghlre/GHLtarUtility/blob/master/PS3Guitar.cs
98 * Note: The Wii U and PS3 dongles happen to share the same!
99 */
100 static const char ghl_ps3wiiu_magic_data[] = {
101 0x02, 0x08, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00
102 };
103
104 /* Magic data for the PS4 dongles sniffed with a USB protocol
105 * analyzer.
106 */
107 static const char ghl_ps4_magic_data[] = {
108 0x30, 0x02, 0x08, 0x0A, 0x00, 0x00, 0x00, 0x00, 0x00
109 };
110
111 /* PS/3 Motion controller */
112 static u8 motion_rdesc[] = {
113 0x05, 0x01, /* Usage Page (Desktop), */
114 0x09, 0x04, /* Usage (Joystick), */
115 0xA1, 0x01, /* Collection (Application), */
116 0xA1, 0x02, /* Collection (Logical), */
117 0x85, 0x01, /* Report ID (1), */
118 0x75, 0x01, /* Report Size (1), */
119 0x95, 0x15, /* Report Count (21), */
120 0x15, 0x00, /* Logical Minimum (0), */
121 0x25, 0x01, /* Logical Maximum (1), */
122 0x35, 0x00, /* Physical Minimum (0), */
123 0x45, 0x01, /* Physical Maximum (1), */
124 0x05, 0x09, /* Usage Page (Button), */
125 0x19, 0x01, /* Usage Minimum (01h), */
126 0x29, 0x15, /* Usage Maximum (15h), */
127 0x81, 0x02, /* Input (Variable), * Buttons */
128 0x95, 0x0B, /* Report Count (11), */
129 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
130 0x81, 0x03, /* Input (Constant, Variable), * Padding */
131 0x15, 0x00, /* Logical Minimum (0), */
132 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
133 0x05, 0x01, /* Usage Page (Desktop), */
134 0xA1, 0x00, /* Collection (Physical), */
135 0x75, 0x08, /* Report Size (8), */
136 0x95, 0x01, /* Report Count (1), */
137 0x35, 0x00, /* Physical Minimum (0), */
138 0x46, 0xFF, 0x00, /* Physical Maximum (255), */
139 0x09, 0x30, /* Usage (X), */
140 0x81, 0x02, /* Input (Variable), * Trigger */
141 0xC0, /* End Collection, */
142 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
143 0x75, 0x08, /* Report Size (8), */
144 0x95, 0x07, /* Report Count (7), * skip 7 bytes */
145 0x81, 0x02, /* Input (Variable), */
146 0x05, 0x01, /* Usage Page (Desktop), */
147 0x75, 0x10, /* Report Size (16), */
148 0x46, 0xFF, 0xFF, /* Physical Maximum (65535), */
149 0x27, 0xFF, 0xFF, 0x00, 0x00, /* Logical Maximum (65535), */
150 0x95, 0x03, /* Report Count (3), * 3x Accels */
151 0x09, 0x33, /* Usage (rX), */
152 0x09, 0x34, /* Usage (rY), */
153 0x09, 0x35, /* Usage (rZ), */
154 0x81, 0x02, /* Input (Variable), */
155 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
156 0x95, 0x03, /* Report Count (3), * Skip Accels 2nd frame */
157 0x81, 0x02, /* Input (Variable), */
158 0x05, 0x01, /* Usage Page (Desktop), */
159 0x09, 0x01, /* Usage (Pointer), */
160 0x95, 0x03, /* Report Count (3), * 3x Gyros */
161 0x81, 0x02, /* Input (Variable), */
162 0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
163 0x95, 0x03, /* Report Count (3), * Skip Gyros 2nd frame */
164 0x81, 0x02, /* Input (Variable), */
165 0x75, 0x0C, /* Report Size (12), */
166 0x46, 0xFF, 0x0F, /* Physical Maximum (4095), */
167 0x26, 0xFF, 0x0F, /* Logical Maximum (4095), */
168 0x95, 0x04, /* Report Count (4), * Skip Temp and Magnetometers */
169 0x81, 0x02, /* Input (Variable), */
170 0x75, 0x08, /* Report Size (8), */
171 0x46, 0xFF, 0x00, /* Physical Maximum (255), */
172 0x26, 0xFF, 0x00, /* Logical Maximum (255), */
173 0x95, 0x06, /* Report Count (6), * Skip Timestamp and Extension Bytes */
174 0x81, 0x02, /* Input (Variable), */
175 0x75, 0x08, /* Report Size (8), */
176 0x95, 0x30, /* Report Count (48), */
177 0x09, 0x01, /* Usage (Pointer), */
178 0x91, 0x02, /* Output (Variable), */
179 0x75, 0x08, /* Report Size (8), */
180 0x95, 0x30, /* Report Count (48), */
181 0x09, 0x01, /* Usage (Pointer), */
182 0xB1, 0x02, /* Feature (Variable), */
183 0xC0, /* End Collection, */
184 0xA1, 0x02, /* Collection (Logical), */
185 0x85, 0x02, /* Report ID (2), */
186 0x75, 0x08, /* Report Size (8), */
187 0x95, 0x30, /* Report Count (48), */
188 0x09, 0x01, /* Usage (Pointer), */
189 0xB1, 0x02, /* Feature (Variable), */
190 0xC0, /* End Collection, */
191 0xA1, 0x02, /* Collection (Logical), */
192 0x85, 0xEE, /* Report ID (238), */
193 0x75, 0x08, /* Report Size (8), */
194 0x95, 0x30, /* Report Count (48), */
195 0x09, 0x01, /* Usage (Pointer), */
196 0xB1, 0x02, /* Feature (Variable), */
197 0xC0, /* End Collection, */
198 0xA1, 0x02, /* Collection (Logical), */
199 0x85, 0xEF, /* Report ID (239), */
200 0x75, 0x08, /* Report Size (8), */
201 0x95, 0x30, /* Report Count (48), */
202 0x09, 0x01, /* Usage (Pointer), */
203 0xB1, 0x02, /* Feature (Variable), */
204 0xC0, /* End Collection, */
205 0xC0 /* End Collection */
206 };
207
208 static u8 ps3remote_rdesc[] = {
209 0x05, 0x01, /* GUsagePage Generic Desktop */
210 0x09, 0x05, /* LUsage 0x05 [Game Pad] */
211 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */
212
213 /* Use collection 1 for joypad buttons */
214 0xA1, 0x02, /* MCollection Logical (interrelated data) */
215
216 /*
217 * Ignore the 1st byte, maybe it is used for a controller
218 * number but it's not needed for correct operation
219 */
220 0x75, 0x08, /* GReportSize 0x08 [8] */
221 0x95, 0x01, /* GReportCount 0x01 [1] */
222 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
223
224 /*
225 * Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
226 * buttons multiple keypresses are allowed
227 */
228 0x05, 0x09, /* GUsagePage Button */
229 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
230 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */
231 0x14, /* GLogicalMinimum [0] */
232 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */
233 0x75, 0x01, /* GReportSize 0x01 [1] */
234 0x95, 0x18, /* GReportCount 0x18 [24] */
235 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
236
237 0xC0, /* MEndCollection */
238
239 /* Use collection 2 for remote control buttons */
240 0xA1, 0x02, /* MCollection Logical (interrelated data) */
241
242 /* 5th byte is used for remote control buttons */
243 0x05, 0x09, /* GUsagePage Button */
244 0x18, /* LUsageMinimum [No button pressed] */
245 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */
246 0x14, /* GLogicalMinimum [0] */
247 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */
248 0x75, 0x08, /* GReportSize 0x08 [8] */
249 0x95, 0x01, /* GReportCount 0x01 [1] */
250 0x80, /* MInput */
251
252 /*
253 * Ignore bytes from 6th to 11th, 6th to 10th are always constant at
254 * 0xff and 11th is for press indication
255 */
256 0x75, 0x08, /* GReportSize 0x08 [8] */
257 0x95, 0x06, /* GReportCount 0x06 [6] */
258 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
259
260 /* 12th byte is for battery strength */
261 0x05, 0x06, /* GUsagePage Generic Device Controls */
262 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */
263 0x14, /* GLogicalMinimum [0] */
264 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */
265 0x75, 0x08, /* GReportSize 0x08 [8] */
266 0x95, 0x01, /* GReportCount 0x01 [1] */
267 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
268
269 0xC0, /* MEndCollection */
270
271 0xC0 /* MEndCollection [Game Pad] */
272 };
273
274 static const unsigned int ps3remote_keymap_joypad_buttons[] = {
275 [0x01] = KEY_SELECT,
276 [0x02] = BTN_THUMBL, /* L3 */
277 [0x03] = BTN_THUMBR, /* R3 */
278 [0x04] = BTN_START,
279 [0x05] = KEY_UP,
280 [0x06] = KEY_RIGHT,
281 [0x07] = KEY_DOWN,
282 [0x08] = KEY_LEFT,
283 [0x09] = BTN_TL2, /* L2 */
284 [0x0a] = BTN_TR2, /* R2 */
285 [0x0b] = BTN_TL, /* L1 */
286 [0x0c] = BTN_TR, /* R1 */
287 [0x0d] = KEY_OPTION, /* options/triangle */
288 [0x0e] = KEY_BACK, /* back/circle */
289 [0x0f] = BTN_0, /* cross */
290 [0x10] = KEY_SCREEN, /* view/square */
291 [0x11] = KEY_HOMEPAGE, /* PS button */
292 [0x14] = KEY_ENTER,
293 };
294 static const unsigned int ps3remote_keymap_remote_buttons[] = {
295 [0x00] = KEY_1,
296 [0x01] = KEY_2,
297 [0x02] = KEY_3,
298 [0x03] = KEY_4,
299 [0x04] = KEY_5,
300 [0x05] = KEY_6,
301 [0x06] = KEY_7,
302 [0x07] = KEY_8,
303 [0x08] = KEY_9,
304 [0x09] = KEY_0,
305 [0x0e] = KEY_ESC, /* return */
306 [0x0f] = KEY_CLEAR,
307 [0x16] = KEY_EJECTCD,
308 [0x1a] = KEY_MENU, /* top menu */
309 [0x28] = KEY_TIME,
310 [0x30] = KEY_PREVIOUS,
311 [0x31] = KEY_NEXT,
312 [0x32] = KEY_PLAY,
313 [0x33] = KEY_REWIND, /* scan back */
314 [0x34] = KEY_FORWARD, /* scan forward */
315 [0x38] = KEY_STOP,
316 [0x39] = KEY_PAUSE,
317 [0x40] = KEY_CONTEXT_MENU, /* pop up/menu */
318 [0x60] = KEY_FRAMEBACK, /* slow/step back */
319 [0x61] = KEY_FRAMEFORWARD, /* slow/step forward */
320 [0x63] = KEY_SUBTITLE,
321 [0x64] = KEY_AUDIO,
322 [0x65] = KEY_ANGLE,
323 [0x70] = KEY_INFO, /* display */
324 [0x80] = KEY_BLUE,
325 [0x81] = KEY_RED,
326 [0x82] = KEY_GREEN,
327 [0x83] = KEY_YELLOW,
328 };
329
330 static const unsigned int buzz_keymap[] = {
331 /*
332 * The controller has 4 remote buzzers, each with one LED and 5
333 * buttons.
334 *
335 * We use the mapping chosen by the controller, which is:
336 *
337 * Key Offset
338 * -------------------
339 * Buzz 1
340 * Blue 5
341 * Orange 4
342 * Green 3
343 * Yellow 2
344 *
345 * So, for example, the orange button on the third buzzer is mapped to
346 * BTN_TRIGGER_HAPPY14
347 */
348 [1] = BTN_TRIGGER_HAPPY1,
349 [2] = BTN_TRIGGER_HAPPY2,
350 [3] = BTN_TRIGGER_HAPPY3,
351 [4] = BTN_TRIGGER_HAPPY4,
352 [5] = BTN_TRIGGER_HAPPY5,
353 [6] = BTN_TRIGGER_HAPPY6,
354 [7] = BTN_TRIGGER_HAPPY7,
355 [8] = BTN_TRIGGER_HAPPY8,
356 [9] = BTN_TRIGGER_HAPPY9,
357 [10] = BTN_TRIGGER_HAPPY10,
358 [11] = BTN_TRIGGER_HAPPY11,
359 [12] = BTN_TRIGGER_HAPPY12,
360 [13] = BTN_TRIGGER_HAPPY13,
361 [14] = BTN_TRIGGER_HAPPY14,
362 [15] = BTN_TRIGGER_HAPPY15,
363 [16] = BTN_TRIGGER_HAPPY16,
364 [17] = BTN_TRIGGER_HAPPY17,
365 [18] = BTN_TRIGGER_HAPPY18,
366 [19] = BTN_TRIGGER_HAPPY19,
367 [20] = BTN_TRIGGER_HAPPY20,
368 };
369
370 /* The Navigation controller is a partial DS3 and uses the same HID report
371 * and hence the same keymap indices, however not all axes/buttons
372 * are physically present. We use the same axis and button mapping as
373 * the DS3, which uses the Linux gamepad spec.
374 */
375 static const unsigned int navigation_absmap[] = {
376 [0x30] = ABS_X,
377 [0x31] = ABS_Y,
378 [0x33] = ABS_Z, /* L2 */
379 };
380
381 /* Buttons not physically available on the device, but still available
382 * in the reports are explicitly set to 0 for documentation purposes.
383 */
384 static const unsigned int navigation_keymap[] = {
385 [0x01] = 0, /* Select */
386 [0x02] = BTN_THUMBL, /* L3 */
387 [0x03] = 0, /* R3 */
388 [0x04] = 0, /* Start */
389 [0x05] = BTN_DPAD_UP, /* Up */
390 [0x06] = BTN_DPAD_RIGHT, /* Right */
391 [0x07] = BTN_DPAD_DOWN, /* Down */
392 [0x08] = BTN_DPAD_LEFT, /* Left */
393 [0x09] = BTN_TL2, /* L2 */
394 [0x0a] = 0, /* R2 */
395 [0x0b] = BTN_TL, /* L1 */
396 [0x0c] = 0, /* R1 */
397 [0x0d] = BTN_NORTH, /* Triangle */
398 [0x0e] = BTN_EAST, /* Circle */
399 [0x0f] = BTN_SOUTH, /* Cross */
400 [0x10] = BTN_WEST, /* Square */
401 [0x11] = BTN_MODE, /* PS */
402 };
403
404 static const unsigned int sixaxis_absmap[] = {
405 [0x30] = ABS_X,
406 [0x31] = ABS_Y,
407 [0x32] = ABS_RX, /* right stick X */
408 [0x35] = ABS_RY, /* right stick Y */
409 };
410
411 static const unsigned int sixaxis_keymap[] = {
412 [0x01] = BTN_SELECT, /* Select */
413 [0x02] = BTN_THUMBL, /* L3 */
414 [0x03] = BTN_THUMBR, /* R3 */
415 [0x04] = BTN_START, /* Start */
416 [0x05] = BTN_DPAD_UP, /* Up */
417 [0x06] = BTN_DPAD_RIGHT, /* Right */
418 [0x07] = BTN_DPAD_DOWN, /* Down */
419 [0x08] = BTN_DPAD_LEFT, /* Left */
420 [0x09] = BTN_TL2, /* L2 */
421 [0x0a] = BTN_TR2, /* R2 */
422 [0x0b] = BTN_TL, /* L1 */
423 [0x0c] = BTN_TR, /* R1 */
424 [0x0d] = BTN_NORTH, /* Triangle */
425 [0x0e] = BTN_EAST, /* Circle */
426 [0x0f] = BTN_SOUTH, /* Cross */
427 [0x10] = BTN_WEST, /* Square */
428 [0x11] = BTN_MODE, /* PS */
429 };
430
431 static const unsigned int ds4_absmap[] = {
432 [0x30] = ABS_X,
433 [0x31] = ABS_Y,
434 [0x32] = ABS_RX, /* right stick X */
435 [0x33] = ABS_Z, /* L2 */
436 [0x34] = ABS_RZ, /* R2 */
437 [0x35] = ABS_RY, /* right stick Y */
438 };
439
440 static const unsigned int ds4_keymap[] = {
441 [0x1] = BTN_WEST, /* Square */
442 [0x2] = BTN_SOUTH, /* Cross */
443 [0x3] = BTN_EAST, /* Circle */
444 [0x4] = BTN_NORTH, /* Triangle */
445 [0x5] = BTN_TL, /* L1 */
446 [0x6] = BTN_TR, /* R1 */
447 [0x7] = BTN_TL2, /* L2 */
448 [0x8] = BTN_TR2, /* R2 */
449 [0x9] = BTN_SELECT, /* Share */
450 [0xa] = BTN_START, /* Options */
451 [0xb] = BTN_THUMBL, /* L3 */
452 [0xc] = BTN_THUMBR, /* R3 */
453 [0xd] = BTN_MODE, /* PS */
454 };
455
456 static const struct {int x; int y; } ds4_hat_mapping[] = {
457 {0, -1}, {1, -1}, {1, 0}, {1, 1}, {0, 1}, {-1, 1}, {-1, 0}, {-1, -1},
458 {0, 0}
459 };
460
461 static enum power_supply_property sony_battery_props[] = {
462 POWER_SUPPLY_PROP_PRESENT,
463 POWER_SUPPLY_PROP_CAPACITY,
464 POWER_SUPPLY_PROP_SCOPE,
465 POWER_SUPPLY_PROP_STATUS,
466 };
467
468 struct sixaxis_led {
469 u8 time_enabled; /* the total time the led is active (0xff means forever) */
470 u8 duty_length; /* how long a cycle is in deciseconds (0 means "really fast") */
471 u8 enabled;
472 u8 duty_off; /* % of duty_length the led is off (0xff means 100%) */
473 u8 duty_on; /* % of duty_length the led is on (0xff mean 100%) */
474 } __packed;
475
476 struct sixaxis_rumble {
477 u8 padding;
478 u8 right_duration; /* Right motor duration (0xff means forever) */
479 u8 right_motor_on; /* Right (small) motor on/off, only supports values of 0 or 1 (off/on) */
480 u8 left_duration; /* Left motor duration (0xff means forever) */
481 u8 left_motor_force; /* left (large) motor, supports force values from 0 to 255 */
482 } __packed;
483
484 struct sixaxis_output_report {
485 u8 report_id;
486 struct sixaxis_rumble rumble;
487 u8 padding[4];
488 u8 leds_bitmap; /* bitmap of enabled LEDs: LED_1 = 0x02, LED_2 = 0x04, ... */
489 struct sixaxis_led led[4]; /* LEDx at (4 - x) */
490 struct sixaxis_led _reserved; /* LED5, not actually soldered */
491 } __packed;
492
493 union sixaxis_output_report_01 {
494 struct sixaxis_output_report data;
495 u8 buf[36];
496 };
497
498 struct motion_output_report_02 {
499 u8 type, zero;
500 u8 r, g, b;
501 u8 zero2;
502 u8 rumble;
503 };
504
505 #define DS4_FEATURE_REPORT_0x02_SIZE 37
506 #define DS4_FEATURE_REPORT_0x05_SIZE 41
507 #define DS4_FEATURE_REPORT_0x81_SIZE 7
508 #define DS4_FEATURE_REPORT_0xA3_SIZE 49
509 #define DS4_INPUT_REPORT_0x11_SIZE 78
510 #define DS4_OUTPUT_REPORT_0x05_SIZE 32
511 #define DS4_OUTPUT_REPORT_0x11_SIZE 78
512 #define SIXAXIS_REPORT_0xF2_SIZE 17
513 #define SIXAXIS_REPORT_0xF5_SIZE 8
514 #define MOTION_REPORT_0x02_SIZE 49
515
516 /* Offsets relative to USB input report (0x1). Bluetooth (0x11) requires an
517 * additional +2.
518 */
519 #define DS4_INPUT_REPORT_AXIS_OFFSET 1
520 #define DS4_INPUT_REPORT_BUTTON_OFFSET 5
521 #define DS4_INPUT_REPORT_TIMESTAMP_OFFSET 10
522 #define DS4_INPUT_REPORT_GYRO_X_OFFSET 13
523 #define DS4_INPUT_REPORT_BATTERY_OFFSET 30
524 #define DS4_INPUT_REPORT_TOUCHPAD_OFFSET 33
525
526 #define SENSOR_SUFFIX " Motion Sensors"
527 #define DS4_TOUCHPAD_SUFFIX " Touchpad"
528
529 /* Default to 4ms poll interval, which is same as USB (not adjustable). */
530 #define DS4_BT_DEFAULT_POLL_INTERVAL_MS 4
531 #define DS4_BT_MAX_POLL_INTERVAL_MS 62
532 #define DS4_GYRO_RES_PER_DEG_S 1024
533 #define DS4_ACC_RES_PER_G 8192
534
535 #define SIXAXIS_INPUT_REPORT_ACC_X_OFFSET 41
536 #define SIXAXIS_ACC_RES_PER_G 113
537
538 static DEFINE_SPINLOCK(sony_dev_list_lock);
539 static LIST_HEAD(sony_device_list);
540 static DEFINE_IDA(sony_device_id_allocator);
541
542 /* Used for calibration of DS4 accelerometer and gyro. */
543 struct ds4_calibration_data {
544 int abs_code;
545 short bias;
546 /* Calibration requires scaling against a sensitivity value, which is a
547 * float. Store sensitivity as a fraction to limit floating point
548 * calculations until final calibration.
549 */
550 int sens_numer;
551 int sens_denom;
552 };
553
554 enum ds4_dongle_state {
555 DONGLE_DISCONNECTED,
556 DONGLE_CALIBRATING,
557 DONGLE_CONNECTED,
558 DONGLE_DISABLED
559 };
560
561 enum sony_worker {
562 SONY_WORKER_STATE,
563 SONY_WORKER_HOTPLUG
564 };
565
566 struct sony_sc {
567 spinlock_t lock;
568 struct list_head list_node;
569 struct hid_device *hdev;
570 struct input_dev *touchpad;
571 struct input_dev *sensor_dev;
572 struct led_classdev *leds[MAX_LEDS];
573 unsigned long quirks;
574 struct work_struct hotplug_worker;
575 struct work_struct state_worker;
576 void (*send_output_report)(struct sony_sc *);
577 struct power_supply *battery;
578 struct power_supply_desc battery_desc;
579 int device_id;
580 unsigned fw_version;
581 bool fw_version_created;
582 unsigned hw_version;
583 bool hw_version_created;
584 u8 *output_report_dmabuf;
585
586 #ifdef CONFIG_SONY_FF
587 u8 left;
588 u8 right;
589 #endif
590
591 u8 mac_address[6];
592 u8 hotplug_worker_initialized;
593 u8 state_worker_initialized;
594 u8 defer_initialization;
595 u8 battery_capacity;
596 int battery_status;
597 u8 led_state[MAX_LEDS];
598 u8 led_delay_on[MAX_LEDS];
599 u8 led_delay_off[MAX_LEDS];
600 u8 led_count;
601
602 bool timestamp_initialized;
603 u16 prev_timestamp;
604 unsigned int timestamp_us;
605
606 u8 ds4_bt_poll_interval;
607 enum ds4_dongle_state ds4_dongle_state;
608 /* DS4 calibration data */
609 struct ds4_calibration_data ds4_calib_data[6];
610 /* GH Live */
611 struct urb *ghl_urb;
612 struct timer_list ghl_poke_timer;
613 };
614
615 static void sony_set_leds(struct sony_sc *sc);
616
sony_schedule_work(struct sony_sc * sc,enum sony_worker which)617 static inline void sony_schedule_work(struct sony_sc *sc,
618 enum sony_worker which)
619 {
620 unsigned long flags;
621
622 switch (which) {
623 case SONY_WORKER_STATE:
624 spin_lock_irqsave(&sc->lock, flags);
625 if (!sc->defer_initialization && sc->state_worker_initialized)
626 schedule_work(&sc->state_worker);
627 spin_unlock_irqrestore(&sc->lock, flags);
628 break;
629 case SONY_WORKER_HOTPLUG:
630 if (sc->hotplug_worker_initialized)
631 schedule_work(&sc->hotplug_worker);
632 break;
633 }
634 }
635
ghl_magic_poke_cb(struct urb * urb)636 static void ghl_magic_poke_cb(struct urb *urb)
637 {
638 struct sony_sc *sc = urb->context;
639
640 if (urb->status < 0)
641 hid_err(sc->hdev, "URB transfer failed : %d", urb->status);
642
643 mod_timer(&sc->ghl_poke_timer, jiffies + GHL_GUITAR_POKE_INTERVAL*HZ);
644 }
645
ghl_magic_poke(struct timer_list * t)646 static void ghl_magic_poke(struct timer_list *t)
647 {
648 int ret;
649 struct sony_sc *sc = from_timer(sc, t, ghl_poke_timer);
650
651 ret = usb_submit_urb(sc->ghl_urb, GFP_ATOMIC);
652 if (ret < 0)
653 hid_err(sc->hdev, "usb_submit_urb failed: %d", ret);
654 }
655
ghl_init_urb(struct sony_sc * sc,struct usb_device * usbdev,const char ghl_magic_data[],u16 poke_size)656 static int ghl_init_urb(struct sony_sc *sc, struct usb_device *usbdev,
657 const char ghl_magic_data[], u16 poke_size)
658 {
659 struct usb_ctrlrequest *cr;
660 u8 *databuf;
661 unsigned int pipe;
662 u16 ghl_magic_value = (((HID_OUTPUT_REPORT + 1) << 8) | ghl_magic_data[0]);
663
664 pipe = usb_sndctrlpipe(usbdev, 0);
665
666 cr = devm_kzalloc(&sc->hdev->dev, sizeof(*cr), GFP_ATOMIC);
667 if (cr == NULL)
668 return -ENOMEM;
669
670 databuf = devm_kzalloc(&sc->hdev->dev, poke_size, GFP_ATOMIC);
671 if (databuf == NULL)
672 return -ENOMEM;
673
674 cr->bRequestType =
675 USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT;
676 cr->bRequest = USB_REQ_SET_CONFIGURATION;
677 cr->wValue = cpu_to_le16(ghl_magic_value);
678 cr->wIndex = 0;
679 cr->wLength = cpu_to_le16(poke_size);
680 memcpy(databuf, ghl_magic_data, poke_size);
681 usb_fill_control_urb(
682 sc->ghl_urb, usbdev, pipe,
683 (unsigned char *) cr, databuf, poke_size,
684 ghl_magic_poke_cb, sc);
685 return 0;
686 }
687
guitar_mapping(struct hid_device * hdev,struct hid_input * hi,struct hid_field * field,struct hid_usage * usage,unsigned long ** bit,int * max)688 static int guitar_mapping(struct hid_device *hdev, struct hid_input *hi,
689 struct hid_field *field, struct hid_usage *usage,
690 unsigned long **bit, int *max)
691 {
692 if ((usage->hid & HID_USAGE_PAGE) == HID_UP_MSVENDOR) {
693 unsigned int abs = usage->hid & HID_USAGE;
694
695 if (abs == GUITAR_TILT_USAGE) {
696 hid_map_usage_clear(hi, usage, bit, max, EV_ABS, ABS_RY);
697 return 1;
698 }
699 }
700 return 0;
701 }
702
ds4_show_poll_interval(struct device * dev,struct device_attribute * attr,char * buf)703 static ssize_t ds4_show_poll_interval(struct device *dev,
704 struct device_attribute
705 *attr, char *buf)
706 {
707 struct hid_device *hdev = to_hid_device(dev);
708 struct sony_sc *sc = hid_get_drvdata(hdev);
709
710 return snprintf(buf, PAGE_SIZE, "%i\n", sc->ds4_bt_poll_interval);
711 }
712
ds4_store_poll_interval(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)713 static ssize_t ds4_store_poll_interval(struct device *dev,
714 struct device_attribute *attr,
715 const char *buf, size_t count)
716 {
717 struct hid_device *hdev = to_hid_device(dev);
718 struct sony_sc *sc = hid_get_drvdata(hdev);
719 unsigned long flags;
720 u8 interval;
721
722 if (kstrtou8(buf, 0, &interval))
723 return -EINVAL;
724
725 if (interval > DS4_BT_MAX_POLL_INTERVAL_MS)
726 return -EINVAL;
727
728 spin_lock_irqsave(&sc->lock, flags);
729 sc->ds4_bt_poll_interval = interval;
730 spin_unlock_irqrestore(&sc->lock, flags);
731
732 sony_schedule_work(sc, SONY_WORKER_STATE);
733
734 return count;
735 }
736
737 static DEVICE_ATTR(bt_poll_interval, 0644, ds4_show_poll_interval,
738 ds4_store_poll_interval);
739
sony_show_firmware_version(struct device * dev,struct device_attribute * attr,char * buf)740 static ssize_t sony_show_firmware_version(struct device *dev,
741 struct device_attribute
742 *attr, char *buf)
743 {
744 struct hid_device *hdev = to_hid_device(dev);
745 struct sony_sc *sc = hid_get_drvdata(hdev);
746
747 return snprintf(buf, PAGE_SIZE, "0x%04x\n", sc->fw_version);
748 }
749
750 static DEVICE_ATTR(firmware_version, 0444, sony_show_firmware_version, NULL);
751
sony_show_hardware_version(struct device * dev,struct device_attribute * attr,char * buf)752 static ssize_t sony_show_hardware_version(struct device *dev,
753 struct device_attribute
754 *attr, char *buf)
755 {
756 struct hid_device *hdev = to_hid_device(dev);
757 struct sony_sc *sc = hid_get_drvdata(hdev);
758
759 return snprintf(buf, PAGE_SIZE, "0x%04x\n", sc->hw_version);
760 }
761
762 static DEVICE_ATTR(hardware_version, 0444, sony_show_hardware_version, NULL);
763
motion_fixup(struct hid_device * hdev,u8 * rdesc,unsigned int * rsize)764 static u8 *motion_fixup(struct hid_device *hdev, u8 *rdesc,
765 unsigned int *rsize)
766 {
767 *rsize = sizeof(motion_rdesc);
768 return motion_rdesc;
769 }
770
ps3remote_fixup(struct hid_device * hdev,u8 * rdesc,unsigned int * rsize)771 static u8 *ps3remote_fixup(struct hid_device *hdev, u8 *rdesc,
772 unsigned int *rsize)
773 {
774 *rsize = sizeof(ps3remote_rdesc);
775 return ps3remote_rdesc;
776 }
777
ps3remote_mapping(struct hid_device * hdev,struct hid_input * hi,struct hid_field * field,struct hid_usage * usage,unsigned long ** bit,int * max)778 static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
779 struct hid_field *field, struct hid_usage *usage,
780 unsigned long **bit, int *max)
781 {
782 unsigned int key = usage->hid & HID_USAGE;
783
784 if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
785 return -1;
786
787 switch (usage->collection_index) {
788 case 1:
789 if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
790 return -1;
791
792 key = ps3remote_keymap_joypad_buttons[key];
793 if (!key)
794 return -1;
795 break;
796 case 2:
797 if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
798 return -1;
799
800 key = ps3remote_keymap_remote_buttons[key];
801 if (!key)
802 return -1;
803 break;
804 default:
805 return -1;
806 }
807
808 hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
809 return 1;
810 }
811
navigation_mapping(struct hid_device * hdev,struct hid_input * hi,struct hid_field * field,struct hid_usage * usage,unsigned long ** bit,int * max)812 static int navigation_mapping(struct hid_device *hdev, struct hid_input *hi,
813 struct hid_field *field, struct hid_usage *usage,
814 unsigned long **bit, int *max)
815 {
816 if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
817 unsigned int key = usage->hid & HID_USAGE;
818
819 if (key >= ARRAY_SIZE(sixaxis_keymap))
820 return -1;
821
822 key = navigation_keymap[key];
823 if (!key)
824 return -1;
825
826 hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
827 return 1;
828 } else if (usage->hid == HID_GD_POINTER) {
829 /* See comment in sixaxis_mapping, basically the L2 (and R2)
830 * triggers are reported through GD Pointer.
831 * In addition we ignore any analog button 'axes' and only
832 * support digital buttons.
833 */
834 switch (usage->usage_index) {
835 case 8: /* L2 */
836 usage->hid = HID_GD_Z;
837 break;
838 default:
839 return -1;
840 }
841
842 hid_map_usage_clear(hi, usage, bit, max, EV_ABS, usage->hid & 0xf);
843 return 1;
844 } else if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK) {
845 unsigned int abs = usage->hid & HID_USAGE;
846
847 if (abs >= ARRAY_SIZE(navigation_absmap))
848 return -1;
849
850 abs = navigation_absmap[abs];
851
852 hid_map_usage_clear(hi, usage, bit, max, EV_ABS, abs);
853 return 1;
854 }
855
856 return -1;
857 }
858
859
sixaxis_mapping(struct hid_device * hdev,struct hid_input * hi,struct hid_field * field,struct hid_usage * usage,unsigned long ** bit,int * max)860 static int sixaxis_mapping(struct hid_device *hdev, struct hid_input *hi,
861 struct hid_field *field, struct hid_usage *usage,
862 unsigned long **bit, int *max)
863 {
864 if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
865 unsigned int key = usage->hid & HID_USAGE;
866
867 if (key >= ARRAY_SIZE(sixaxis_keymap))
868 return -1;
869
870 key = sixaxis_keymap[key];
871 hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
872 return 1;
873 } else if (usage->hid == HID_GD_POINTER) {
874 /* The DS3 provides analog values for most buttons and even
875 * for HAT axes through GD Pointer. L2 and R2 are reported
876 * among these as well instead of as GD Z / RZ. Remap L2
877 * and R2 and ignore other analog 'button axes' as there is
878 * no good way for reporting them.
879 */
880 switch (usage->usage_index) {
881 case 8: /* L2 */
882 usage->hid = HID_GD_Z;
883 break;
884 case 9: /* R2 */
885 usage->hid = HID_GD_RZ;
886 break;
887 default:
888 return -1;
889 }
890
891 hid_map_usage_clear(hi, usage, bit, max, EV_ABS, usage->hid & 0xf);
892 return 1;
893 } else if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK) {
894 unsigned int abs = usage->hid & HID_USAGE;
895
896 if (abs >= ARRAY_SIZE(sixaxis_absmap))
897 return -1;
898
899 abs = sixaxis_absmap[abs];
900
901 hid_map_usage_clear(hi, usage, bit, max, EV_ABS, abs);
902 return 1;
903 }
904
905 return -1;
906 }
907
ds4_mapping(struct hid_device * hdev,struct hid_input * hi,struct hid_field * field,struct hid_usage * usage,unsigned long ** bit,int * max)908 static int ds4_mapping(struct hid_device *hdev, struct hid_input *hi,
909 struct hid_field *field, struct hid_usage *usage,
910 unsigned long **bit, int *max)
911 {
912 if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) {
913 unsigned int key = usage->hid & HID_USAGE;
914
915 if (key >= ARRAY_SIZE(ds4_keymap))
916 return -1;
917
918 key = ds4_keymap[key];
919 hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
920 return 1;
921 } else if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK) {
922 unsigned int abs = usage->hid & HID_USAGE;
923
924 /* Let the HID parser deal with the HAT. */
925 if (usage->hid == HID_GD_HATSWITCH)
926 return 0;
927
928 if (abs >= ARRAY_SIZE(ds4_absmap))
929 return -1;
930
931 abs = ds4_absmap[abs];
932 hid_map_usage_clear(hi, usage, bit, max, EV_ABS, abs);
933 return 1;
934 }
935
936 return 0;
937 }
938
sony_report_fixup(struct hid_device * hdev,u8 * rdesc,unsigned int * rsize)939 static u8 *sony_report_fixup(struct hid_device *hdev, u8 *rdesc,
940 unsigned int *rsize)
941 {
942 struct sony_sc *sc = hid_get_drvdata(hdev);
943
944 if (sc->quirks & (SINO_LITE_CONTROLLER | FUTUREMAX_DANCE_MAT))
945 return rdesc;
946
947 /*
948 * Some Sony RF receivers wrongly declare the mouse pointer as a
949 * a constant non-data variable.
950 */
951 if ((sc->quirks & VAIO_RDESC_CONSTANT) && *rsize >= 56 &&
952 /* usage page: generic desktop controls */
953 /* rdesc[0] == 0x05 && rdesc[1] == 0x01 && */
954 /* usage: mouse */
955 rdesc[2] == 0x09 && rdesc[3] == 0x02 &&
956 /* input (usage page for x,y axes): constant, variable, relative */
957 rdesc[54] == 0x81 && rdesc[55] == 0x07) {
958 hid_info(hdev, "Fixing up Sony RF Receiver report descriptor\n");
959 /* input: data, variable, relative */
960 rdesc[55] = 0x06;
961 }
962
963 if (sc->quirks & MOTION_CONTROLLER)
964 return motion_fixup(hdev, rdesc, rsize);
965
966 if (sc->quirks & PS3REMOTE)
967 return ps3remote_fixup(hdev, rdesc, rsize);
968
969 /*
970 * Some knock-off USB dongles incorrectly report their button count
971 * as 13 instead of 16 causing three non-functional buttons.
972 */
973 if ((sc->quirks & SIXAXIS_CONTROLLER_USB) && *rsize >= 45 &&
974 /* Report Count (13) */
975 rdesc[23] == 0x95 && rdesc[24] == 0x0D &&
976 /* Usage Maximum (13) */
977 rdesc[37] == 0x29 && rdesc[38] == 0x0D &&
978 /* Report Count (3) */
979 rdesc[43] == 0x95 && rdesc[44] == 0x03) {
980 hid_info(hdev, "Fixing up USB dongle report descriptor\n");
981 rdesc[24] = 0x10;
982 rdesc[38] = 0x10;
983 rdesc[44] = 0x00;
984 }
985
986 return rdesc;
987 }
988
sixaxis_parse_report(struct sony_sc * sc,u8 * rd,int size)989 static void sixaxis_parse_report(struct sony_sc *sc, u8 *rd, int size)
990 {
991 static const u8 sixaxis_battery_capacity[] = { 0, 1, 25, 50, 75, 100 };
992 unsigned long flags;
993 int offset;
994 u8 battery_capacity;
995 int battery_status;
996
997 /*
998 * The sixaxis is charging if the battery value is 0xee
999 * and it is fully charged if the value is 0xef.
1000 * It does not report the actual level while charging so it
1001 * is set to 100% while charging is in progress.
1002 */
1003 offset = (sc->quirks & MOTION_CONTROLLER) ? 12 : 30;
1004
1005 if (rd[offset] >= 0xee) {
1006 battery_capacity = 100;
1007 battery_status = (rd[offset] & 0x01) ? POWER_SUPPLY_STATUS_FULL : POWER_SUPPLY_STATUS_CHARGING;
1008 } else {
1009 u8 index = rd[offset] <= 5 ? rd[offset] : 5;
1010 battery_capacity = sixaxis_battery_capacity[index];
1011 battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
1012 }
1013
1014 spin_lock_irqsave(&sc->lock, flags);
1015 sc->battery_capacity = battery_capacity;
1016 sc->battery_status = battery_status;
1017 spin_unlock_irqrestore(&sc->lock, flags);
1018
1019 if (sc->quirks & SIXAXIS_CONTROLLER) {
1020 int val;
1021
1022 offset = SIXAXIS_INPUT_REPORT_ACC_X_OFFSET;
1023 val = ((rd[offset+1] << 8) | rd[offset]) - 511;
1024 input_report_abs(sc->sensor_dev, ABS_X, val);
1025
1026 /* Y and Z are swapped and inversed */
1027 val = 511 - ((rd[offset+5] << 8) | rd[offset+4]);
1028 input_report_abs(sc->sensor_dev, ABS_Y, val);
1029
1030 val = 511 - ((rd[offset+3] << 8) | rd[offset+2]);
1031 input_report_abs(sc->sensor_dev, ABS_Z, val);
1032
1033 input_sync(sc->sensor_dev);
1034 }
1035 }
1036
dualshock4_parse_report(struct sony_sc * sc,u8 * rd,int size)1037 static void dualshock4_parse_report(struct sony_sc *sc, u8 *rd, int size)
1038 {
1039 struct hid_input *hidinput = list_entry(sc->hdev->inputs.next,
1040 struct hid_input, list);
1041 struct input_dev *input_dev = hidinput->input;
1042 unsigned long flags;
1043 int n, m, offset, num_touch_data, max_touch_data;
1044 u8 cable_state, battery_capacity;
1045 int battery_status;
1046 u16 timestamp;
1047
1048 /* When using Bluetooth the header is 2 bytes longer, so skip these. */
1049 int data_offset = (sc->quirks & DUALSHOCK4_CONTROLLER_BT) ? 2 : 0;
1050
1051 /* Second bit of third button byte is for the touchpad button. */
1052 offset = data_offset + DS4_INPUT_REPORT_BUTTON_OFFSET;
1053 input_report_key(sc->touchpad, BTN_LEFT, rd[offset+2] & 0x2);
1054
1055 /*
1056 * The default behavior of the Dualshock 4 is to send reports using
1057 * report type 1 when running over Bluetooth. However, when feature
1058 * report 2 is requested during the controller initialization it starts
1059 * sending input reports in report 17. Since report 17 is undefined
1060 * in the default HID descriptor, the HID layer won't generate events.
1061 * While it is possible (and this was done before) to fixup the HID
1062 * descriptor to add this mapping, it was better to do this manually.
1063 * The reason is there were various pieces software both open and closed
1064 * source, relying on the descriptors to be the same across various
1065 * operating systems. If the descriptors wouldn't match some
1066 * applications e.g. games on Wine would not be able to function due
1067 * to different descriptors, which such applications are not parsing.
1068 */
1069 if (rd[0] == 17) {
1070 int value;
1071
1072 offset = data_offset + DS4_INPUT_REPORT_AXIS_OFFSET;
1073 input_report_abs(input_dev, ABS_X, rd[offset]);
1074 input_report_abs(input_dev, ABS_Y, rd[offset+1]);
1075 input_report_abs(input_dev, ABS_RX, rd[offset+2]);
1076 input_report_abs(input_dev, ABS_RY, rd[offset+3]);
1077
1078 value = rd[offset+4] & 0xf;
1079 if (value > 7)
1080 value = 8; /* Center 0, 0 */
1081 input_report_abs(input_dev, ABS_HAT0X, ds4_hat_mapping[value].x);
1082 input_report_abs(input_dev, ABS_HAT0Y, ds4_hat_mapping[value].y);
1083
1084 input_report_key(input_dev, BTN_WEST, rd[offset+4] & 0x10);
1085 input_report_key(input_dev, BTN_SOUTH, rd[offset+4] & 0x20);
1086 input_report_key(input_dev, BTN_EAST, rd[offset+4] & 0x40);
1087 input_report_key(input_dev, BTN_NORTH, rd[offset+4] & 0x80);
1088
1089 input_report_key(input_dev, BTN_TL, rd[offset+5] & 0x1);
1090 input_report_key(input_dev, BTN_TR, rd[offset+5] & 0x2);
1091 input_report_key(input_dev, BTN_TL2, rd[offset+5] & 0x4);
1092 input_report_key(input_dev, BTN_TR2, rd[offset+5] & 0x8);
1093 input_report_key(input_dev, BTN_SELECT, rd[offset+5] & 0x10);
1094 input_report_key(input_dev, BTN_START, rd[offset+5] & 0x20);
1095 input_report_key(input_dev, BTN_THUMBL, rd[offset+5] & 0x40);
1096 input_report_key(input_dev, BTN_THUMBR, rd[offset+5] & 0x80);
1097
1098 input_report_key(input_dev, BTN_MODE, rd[offset+6] & 0x1);
1099
1100 input_report_abs(input_dev, ABS_Z, rd[offset+7]);
1101 input_report_abs(input_dev, ABS_RZ, rd[offset+8]);
1102
1103 input_sync(input_dev);
1104 }
1105
1106 /* Convert timestamp (in 5.33us unit) to timestamp_us */
1107 offset = data_offset + DS4_INPUT_REPORT_TIMESTAMP_OFFSET;
1108 timestamp = get_unaligned_le16(&rd[offset]);
1109 if (!sc->timestamp_initialized) {
1110 sc->timestamp_us = ((unsigned int)timestamp * 16) / 3;
1111 sc->timestamp_initialized = true;
1112 } else {
1113 u16 delta;
1114
1115 if (sc->prev_timestamp > timestamp)
1116 delta = (U16_MAX - sc->prev_timestamp + timestamp + 1);
1117 else
1118 delta = timestamp - sc->prev_timestamp;
1119 sc->timestamp_us += (delta * 16) / 3;
1120 }
1121 sc->prev_timestamp = timestamp;
1122 input_event(sc->sensor_dev, EV_MSC, MSC_TIMESTAMP, sc->timestamp_us);
1123
1124 offset = data_offset + DS4_INPUT_REPORT_GYRO_X_OFFSET;
1125 for (n = 0; n < 6; n++) {
1126 /* Store data in int for more precision during mult_frac. */
1127 int raw_data = (short)((rd[offset+1] << 8) | rd[offset]);
1128 struct ds4_calibration_data *calib = &sc->ds4_calib_data[n];
1129
1130 /* High precision is needed during calibration, but the
1131 * calibrated values are within 32-bit.
1132 * Note: we swap numerator 'x' and 'numer' in mult_frac for
1133 * precision reasons so we don't need 64-bit.
1134 */
1135 int calib_data = mult_frac(calib->sens_numer,
1136 raw_data - calib->bias,
1137 calib->sens_denom);
1138
1139 input_report_abs(sc->sensor_dev, calib->abs_code, calib_data);
1140 offset += 2;
1141 }
1142 input_sync(sc->sensor_dev);
1143
1144 /*
1145 * The lower 4 bits of byte 30 (or 32 for BT) contain the battery level
1146 * and the 5th bit contains the USB cable state.
1147 */
1148 offset = data_offset + DS4_INPUT_REPORT_BATTERY_OFFSET;
1149 cable_state = (rd[offset] >> 4) & 0x01;
1150
1151 /*
1152 * Interpretation of the battery_capacity data depends on the cable state.
1153 * When no cable is connected (bit4 is 0):
1154 * - 0:10: percentage in units of 10%.
1155 * When a cable is plugged in:
1156 * - 0-10: percentage in units of 10%.
1157 * - 11: battery is full
1158 * - 14: not charging due to Voltage or temperature error
1159 * - 15: charge error
1160 */
1161 if (cable_state) {
1162 u8 battery_data = rd[offset] & 0xf;
1163
1164 if (battery_data < 10) {
1165 /* Take the mid-point for each battery capacity value,
1166 * because on the hardware side 0 = 0-9%, 1=10-19%, etc.
1167 * This matches official platform behavior, which does
1168 * the same.
1169 */
1170 battery_capacity = battery_data * 10 + 5;
1171 battery_status = POWER_SUPPLY_STATUS_CHARGING;
1172 } else if (battery_data == 10) {
1173 battery_capacity = 100;
1174 battery_status = POWER_SUPPLY_STATUS_CHARGING;
1175 } else if (battery_data == 11) {
1176 battery_capacity = 100;
1177 battery_status = POWER_SUPPLY_STATUS_FULL;
1178 } else { /* 14, 15 and undefined values */
1179 battery_capacity = 0;
1180 battery_status = POWER_SUPPLY_STATUS_UNKNOWN;
1181 }
1182 } else {
1183 u8 battery_data = rd[offset] & 0xf;
1184
1185 if (battery_data < 10)
1186 battery_capacity = battery_data * 10 + 5;
1187 else /* 10 */
1188 battery_capacity = 100;
1189
1190 battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
1191 }
1192
1193 spin_lock_irqsave(&sc->lock, flags);
1194 sc->battery_capacity = battery_capacity;
1195 sc->battery_status = battery_status;
1196 spin_unlock_irqrestore(&sc->lock, flags);
1197
1198 /*
1199 * The Dualshock 4 multi-touch trackpad data starts at offset 33 on USB
1200 * and 35 on Bluetooth.
1201 * The first byte indicates the number of touch data in the report.
1202 * Trackpad data starts 2 bytes later (e.g. 35 for USB).
1203 */
1204 offset = data_offset + DS4_INPUT_REPORT_TOUCHPAD_OFFSET;
1205 max_touch_data = (sc->quirks & DUALSHOCK4_CONTROLLER_BT) ? 4 : 3;
1206 if (rd[offset] > 0 && rd[offset] <= max_touch_data)
1207 num_touch_data = rd[offset];
1208 else
1209 num_touch_data = 1;
1210 offset += 1;
1211
1212 for (m = 0; m < num_touch_data; m++) {
1213 /* Skip past timestamp */
1214 offset += 1;
1215
1216 /*
1217 * The first 7 bits of the first byte is a counter and bit 8 is
1218 * a touch indicator that is 0 when pressed and 1 when not
1219 * pressed.
1220 * The next 3 bytes are two 12 bit touch coordinates, X and Y.
1221 * The data for the second touch is in the same format and
1222 * immediately follows the data for the first.
1223 */
1224 for (n = 0; n < 2; n++) {
1225 u16 x, y;
1226 bool active;
1227
1228 x = rd[offset+1] | ((rd[offset+2] & 0xF) << 8);
1229 y = ((rd[offset+2] & 0xF0) >> 4) | (rd[offset+3] << 4);
1230
1231 active = !(rd[offset] >> 7);
1232 input_mt_slot(sc->touchpad, n);
1233 input_mt_report_slot_state(sc->touchpad, MT_TOOL_FINGER, active);
1234
1235 if (active) {
1236 input_report_abs(sc->touchpad, ABS_MT_POSITION_X, x);
1237 input_report_abs(sc->touchpad, ABS_MT_POSITION_Y, y);
1238 }
1239
1240 offset += 4;
1241 }
1242 input_mt_sync_frame(sc->touchpad);
1243 input_sync(sc->touchpad);
1244 }
1245 }
1246
nsg_mrxu_parse_report(struct sony_sc * sc,u8 * rd,int size)1247 static void nsg_mrxu_parse_report(struct sony_sc *sc, u8 *rd, int size)
1248 {
1249 int n, offset, relx, rely;
1250 u8 active;
1251
1252 /*
1253 * The NSG-MRxU multi-touch trackpad data starts at offset 1 and
1254 * the touch-related data starts at offset 2.
1255 * For the first byte, bit 0 is set when touchpad button is pressed.
1256 * Bit 2 is set when a touch is active and the drag (Fn) key is pressed.
1257 * This drag key is mapped to BTN_LEFT. It is operational only when a
1258 * touch point is active.
1259 * Bit 4 is set when only the first touch point is active.
1260 * Bit 6 is set when only the second touch point is active.
1261 * Bits 5 and 7 are set when both touch points are active.
1262 * The next 3 bytes are two 12 bit X/Y coordinates for the first touch.
1263 * The following byte, offset 5, has the touch width and length.
1264 * Bits 0-4=X (width), bits 5-7=Y (length).
1265 * A signed relative X coordinate is at offset 6.
1266 * The bytes at offset 7-9 are the second touch X/Y coordinates.
1267 * Offset 10 has the second touch width and length.
1268 * Offset 11 has the relative Y coordinate.
1269 */
1270 offset = 1;
1271
1272 input_report_key(sc->touchpad, BTN_LEFT, rd[offset] & 0x0F);
1273 active = (rd[offset] >> 4);
1274 relx = (s8) rd[offset+5];
1275 rely = ((s8) rd[offset+10]) * -1;
1276
1277 offset++;
1278
1279 for (n = 0; n < 2; n++) {
1280 u16 x, y;
1281 u8 contactx, contacty;
1282
1283 x = rd[offset] | ((rd[offset+1] & 0x0F) << 8);
1284 y = ((rd[offset+1] & 0xF0) >> 4) | (rd[offset+2] << 4);
1285
1286 input_mt_slot(sc->touchpad, n);
1287 input_mt_report_slot_state(sc->touchpad, MT_TOOL_FINGER, active & 0x03);
1288
1289 if (active & 0x03) {
1290 contactx = rd[offset+3] & 0x0F;
1291 contacty = rd[offset+3] >> 4;
1292 input_report_abs(sc->touchpad, ABS_MT_TOUCH_MAJOR,
1293 max(contactx, contacty));
1294 input_report_abs(sc->touchpad, ABS_MT_TOUCH_MINOR,
1295 min(contactx, contacty));
1296 input_report_abs(sc->touchpad, ABS_MT_ORIENTATION,
1297 (bool) (contactx > contacty));
1298 input_report_abs(sc->touchpad, ABS_MT_POSITION_X, x);
1299 input_report_abs(sc->touchpad, ABS_MT_POSITION_Y,
1300 NSG_MRXU_MAX_Y - y);
1301 /*
1302 * The relative coordinates belong to the first touch
1303 * point, when present, or to the second touch point
1304 * when the first is not active.
1305 */
1306 if ((n == 0) || ((n == 1) && (active & 0x01))) {
1307 input_report_rel(sc->touchpad, REL_X, relx);
1308 input_report_rel(sc->touchpad, REL_Y, rely);
1309 }
1310 }
1311
1312 offset += 5;
1313 active >>= 2;
1314 }
1315
1316 input_mt_sync_frame(sc->touchpad);
1317
1318 input_sync(sc->touchpad);
1319 }
1320
sony_raw_event(struct hid_device * hdev,struct hid_report * report,u8 * rd,int size)1321 static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
1322 u8 *rd, int size)
1323 {
1324 struct sony_sc *sc = hid_get_drvdata(hdev);
1325
1326 /*
1327 * Sixaxis HID report has acclerometers/gyro with MSByte first, this
1328 * has to be BYTE_SWAPPED before passing up to joystick interface
1329 */
1330 if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) {
1331 /*
1332 * When connected via Bluetooth the Sixaxis occasionally sends
1333 * a report with the second byte 0xff and the rest zeroed.
1334 *
1335 * This report does not reflect the actual state of the
1336 * controller must be ignored to avoid generating false input
1337 * events.
1338 */
1339 if (rd[1] == 0xff)
1340 return -EINVAL;
1341
1342 swap(rd[41], rd[42]);
1343 swap(rd[43], rd[44]);
1344 swap(rd[45], rd[46]);
1345 swap(rd[47], rd[48]);
1346
1347 sixaxis_parse_report(sc, rd, size);
1348 } else if ((sc->quirks & MOTION_CONTROLLER_BT) && rd[0] == 0x01 && size == 49) {
1349 sixaxis_parse_report(sc, rd, size);
1350 } else if ((sc->quirks & NAVIGATION_CONTROLLER) && rd[0] == 0x01 &&
1351 size == 49) {
1352 sixaxis_parse_report(sc, rd, size);
1353 } else if ((sc->quirks & DUALSHOCK4_CONTROLLER_USB) && rd[0] == 0x01 &&
1354 size == 64) {
1355 dualshock4_parse_report(sc, rd, size);
1356 } else if (((sc->quirks & DUALSHOCK4_CONTROLLER_BT) && rd[0] == 0x11 &&
1357 size == 78)) {
1358 /* CRC check */
1359 u8 bthdr = 0xA1;
1360 u32 crc;
1361 u32 report_crc;
1362
1363 crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
1364 crc = ~crc32_le(crc, rd, DS4_INPUT_REPORT_0x11_SIZE-4);
1365 report_crc = get_unaligned_le32(&rd[DS4_INPUT_REPORT_0x11_SIZE-4]);
1366 if (crc != report_crc) {
1367 hid_dbg(sc->hdev, "DualShock 4 input report's CRC check failed, received crc 0x%0x != 0x%0x\n",
1368 report_crc, crc);
1369 return -EILSEQ;
1370 }
1371
1372 dualshock4_parse_report(sc, rd, size);
1373 } else if ((sc->quirks & DUALSHOCK4_DONGLE) && rd[0] == 0x01 &&
1374 size == 64) {
1375 unsigned long flags;
1376 enum ds4_dongle_state dongle_state;
1377
1378 /*
1379 * In the case of a DS4 USB dongle, bit[2] of byte 31 indicates
1380 * if a DS4 is actually connected (indicated by '0').
1381 * For non-dongle, this bit is always 0 (connected).
1382 */
1383 bool connected = (rd[31] & 0x04) ? false : true;
1384
1385 spin_lock_irqsave(&sc->lock, flags);
1386 dongle_state = sc->ds4_dongle_state;
1387 spin_unlock_irqrestore(&sc->lock, flags);
1388
1389 /*
1390 * The dongle always sends input reports even when no
1391 * DS4 is attached. When a DS4 is connected, we need to
1392 * obtain calibration data before we can use it.
1393 * The code below tracks dongle state and kicks of
1394 * calibration when needed and only allows us to process
1395 * input if a DS4 is actually connected.
1396 */
1397 if (dongle_state == DONGLE_DISCONNECTED && connected) {
1398 hid_info(sc->hdev, "DualShock 4 USB dongle: controller connected\n");
1399 sony_set_leds(sc);
1400
1401 spin_lock_irqsave(&sc->lock, flags);
1402 sc->ds4_dongle_state = DONGLE_CALIBRATING;
1403 spin_unlock_irqrestore(&sc->lock, flags);
1404
1405 sony_schedule_work(sc, SONY_WORKER_HOTPLUG);
1406
1407 /* Don't process the report since we don't have
1408 * calibration data, but let hidraw have it anyway.
1409 */
1410 return 0;
1411 } else if ((dongle_state == DONGLE_CONNECTED ||
1412 dongle_state == DONGLE_DISABLED) && !connected) {
1413 hid_info(sc->hdev, "DualShock 4 USB dongle: controller disconnected\n");
1414
1415 spin_lock_irqsave(&sc->lock, flags);
1416 sc->ds4_dongle_state = DONGLE_DISCONNECTED;
1417 spin_unlock_irqrestore(&sc->lock, flags);
1418
1419 /* Return 0, so hidraw can get the report. */
1420 return 0;
1421 } else if (dongle_state == DONGLE_CALIBRATING ||
1422 dongle_state == DONGLE_DISABLED ||
1423 dongle_state == DONGLE_DISCONNECTED) {
1424 /* Return 0, so hidraw can get the report. */
1425 return 0;
1426 }
1427
1428 dualshock4_parse_report(sc, rd, size);
1429
1430 } else if ((sc->quirks & NSG_MRXU_REMOTE) && rd[0] == 0x02) {
1431 nsg_mrxu_parse_report(sc, rd, size);
1432 return 1;
1433 }
1434
1435 if (sc->defer_initialization) {
1436 sc->defer_initialization = 0;
1437 sony_schedule_work(sc, SONY_WORKER_STATE);
1438 }
1439
1440 return 0;
1441 }
1442
sony_mapping(struct hid_device * hdev,struct hid_input * hi,struct hid_field * field,struct hid_usage * usage,unsigned long ** bit,int * max)1443 static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
1444 struct hid_field *field, struct hid_usage *usage,
1445 unsigned long **bit, int *max)
1446 {
1447 struct sony_sc *sc = hid_get_drvdata(hdev);
1448
1449 if (sc->quirks & BUZZ_CONTROLLER) {
1450 unsigned int key = usage->hid & HID_USAGE;
1451
1452 if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
1453 return -1;
1454
1455 switch (usage->collection_index) {
1456 case 1:
1457 if (key >= ARRAY_SIZE(buzz_keymap))
1458 return -1;
1459
1460 key = buzz_keymap[key];
1461 if (!key)
1462 return -1;
1463 break;
1464 default:
1465 return -1;
1466 }
1467
1468 hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
1469 return 1;
1470 }
1471
1472 if (sc->quirks & PS3REMOTE)
1473 return ps3remote_mapping(hdev, hi, field, usage, bit, max);
1474
1475 if (sc->quirks & NAVIGATION_CONTROLLER)
1476 return navigation_mapping(hdev, hi, field, usage, bit, max);
1477
1478 if (sc->quirks & SIXAXIS_CONTROLLER)
1479 return sixaxis_mapping(hdev, hi, field, usage, bit, max);
1480
1481 if (sc->quirks & DUALSHOCK4_CONTROLLER)
1482 return ds4_mapping(hdev, hi, field, usage, bit, max);
1483
1484 if (sc->quirks & GH_GUITAR_CONTROLLER)
1485 return guitar_mapping(hdev, hi, field, usage, bit, max);
1486
1487 /* Let hid-core decide for the others */
1488 return 0;
1489 }
1490
sony_register_touchpad(struct sony_sc * sc,int touch_count,int w,int h,int touch_major,int touch_minor,int orientation)1491 static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
1492 int w, int h, int touch_major, int touch_minor, int orientation)
1493 {
1494 size_t name_sz;
1495 char *name;
1496 int ret;
1497
1498 sc->touchpad = devm_input_allocate_device(&sc->hdev->dev);
1499 if (!sc->touchpad)
1500 return -ENOMEM;
1501
1502 input_set_drvdata(sc->touchpad, sc);
1503 sc->touchpad->dev.parent = &sc->hdev->dev;
1504 sc->touchpad->phys = sc->hdev->phys;
1505 sc->touchpad->uniq = sc->hdev->uniq;
1506 sc->touchpad->id.bustype = sc->hdev->bus;
1507 sc->touchpad->id.vendor = sc->hdev->vendor;
1508 sc->touchpad->id.product = sc->hdev->product;
1509 sc->touchpad->id.version = sc->hdev->version;
1510
1511 /* Append a suffix to the controller name as there are various
1512 * DS4 compatible non-Sony devices with different names.
1513 */
1514 name_sz = strlen(sc->hdev->name) + sizeof(DS4_TOUCHPAD_SUFFIX);
1515 name = devm_kzalloc(&sc->hdev->dev, name_sz, GFP_KERNEL);
1516 if (!name)
1517 return -ENOMEM;
1518 snprintf(name, name_sz, "%s" DS4_TOUCHPAD_SUFFIX, sc->hdev->name);
1519 sc->touchpad->name = name;
1520
1521 /* We map the button underneath the touchpad to BTN_LEFT. */
1522 __set_bit(EV_KEY, sc->touchpad->evbit);
1523 __set_bit(BTN_LEFT, sc->touchpad->keybit);
1524 __set_bit(INPUT_PROP_BUTTONPAD, sc->touchpad->propbit);
1525
1526 input_set_abs_params(sc->touchpad, ABS_MT_POSITION_X, 0, w, 0, 0);
1527 input_set_abs_params(sc->touchpad, ABS_MT_POSITION_Y, 0, h, 0, 0);
1528
1529 if (touch_major > 0) {
1530 input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MAJOR,
1531 0, touch_major, 0, 0);
1532 if (touch_minor > 0)
1533 input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MINOR,
1534 0, touch_minor, 0, 0);
1535 if (orientation > 0)
1536 input_set_abs_params(sc->touchpad, ABS_MT_ORIENTATION,
1537 0, orientation, 0, 0);
1538 }
1539
1540 if (sc->quirks & NSG_MRXU_REMOTE) {
1541 __set_bit(EV_REL, sc->touchpad->evbit);
1542 }
1543
1544 ret = input_mt_init_slots(sc->touchpad, touch_count, INPUT_MT_POINTER);
1545 if (ret < 0)
1546 return ret;
1547
1548 ret = input_register_device(sc->touchpad);
1549 if (ret < 0)
1550 return ret;
1551
1552 return 0;
1553 }
1554
sony_register_sensors(struct sony_sc * sc)1555 static int sony_register_sensors(struct sony_sc *sc)
1556 {
1557 size_t name_sz;
1558 char *name;
1559 int ret;
1560 int range;
1561
1562 sc->sensor_dev = devm_input_allocate_device(&sc->hdev->dev);
1563 if (!sc->sensor_dev)
1564 return -ENOMEM;
1565
1566 input_set_drvdata(sc->sensor_dev, sc);
1567 sc->sensor_dev->dev.parent = &sc->hdev->dev;
1568 sc->sensor_dev->phys = sc->hdev->phys;
1569 sc->sensor_dev->uniq = sc->hdev->uniq;
1570 sc->sensor_dev->id.bustype = sc->hdev->bus;
1571 sc->sensor_dev->id.vendor = sc->hdev->vendor;
1572 sc->sensor_dev->id.product = sc->hdev->product;
1573 sc->sensor_dev->id.version = sc->hdev->version;
1574
1575 /* Append a suffix to the controller name as there are various
1576 * DS4 compatible non-Sony devices with different names.
1577 */
1578 name_sz = strlen(sc->hdev->name) + sizeof(SENSOR_SUFFIX);
1579 name = devm_kzalloc(&sc->hdev->dev, name_sz, GFP_KERNEL);
1580 if (!name)
1581 return -ENOMEM;
1582 snprintf(name, name_sz, "%s" SENSOR_SUFFIX, sc->hdev->name);
1583 sc->sensor_dev->name = name;
1584
1585 if (sc->quirks & SIXAXIS_CONTROLLER) {
1586 /* For the DS3 we only support the accelerometer, which works
1587 * quite well even without calibration. The device also has
1588 * a 1-axis gyro, but it is very difficult to manage from within
1589 * the driver even to get data, the sensor is inaccurate and
1590 * the behavior is very different between hardware revisions.
1591 */
1592 input_set_abs_params(sc->sensor_dev, ABS_X, -512, 511, 4, 0);
1593 input_set_abs_params(sc->sensor_dev, ABS_Y, -512, 511, 4, 0);
1594 input_set_abs_params(sc->sensor_dev, ABS_Z, -512, 511, 4, 0);
1595 input_abs_set_res(sc->sensor_dev, ABS_X, SIXAXIS_ACC_RES_PER_G);
1596 input_abs_set_res(sc->sensor_dev, ABS_Y, SIXAXIS_ACC_RES_PER_G);
1597 input_abs_set_res(sc->sensor_dev, ABS_Z, SIXAXIS_ACC_RES_PER_G);
1598 } else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
1599 range = DS4_ACC_RES_PER_G*4;
1600 input_set_abs_params(sc->sensor_dev, ABS_X, -range, range, 16, 0);
1601 input_set_abs_params(sc->sensor_dev, ABS_Y, -range, range, 16, 0);
1602 input_set_abs_params(sc->sensor_dev, ABS_Z, -range, range, 16, 0);
1603 input_abs_set_res(sc->sensor_dev, ABS_X, DS4_ACC_RES_PER_G);
1604 input_abs_set_res(sc->sensor_dev, ABS_Y, DS4_ACC_RES_PER_G);
1605 input_abs_set_res(sc->sensor_dev, ABS_Z, DS4_ACC_RES_PER_G);
1606
1607 range = DS4_GYRO_RES_PER_DEG_S*2048;
1608 input_set_abs_params(sc->sensor_dev, ABS_RX, -range, range, 16, 0);
1609 input_set_abs_params(sc->sensor_dev, ABS_RY, -range, range, 16, 0);
1610 input_set_abs_params(sc->sensor_dev, ABS_RZ, -range, range, 16, 0);
1611 input_abs_set_res(sc->sensor_dev, ABS_RX, DS4_GYRO_RES_PER_DEG_S);
1612 input_abs_set_res(sc->sensor_dev, ABS_RY, DS4_GYRO_RES_PER_DEG_S);
1613 input_abs_set_res(sc->sensor_dev, ABS_RZ, DS4_GYRO_RES_PER_DEG_S);
1614
1615 __set_bit(EV_MSC, sc->sensor_dev->evbit);
1616 __set_bit(MSC_TIMESTAMP, sc->sensor_dev->mscbit);
1617 }
1618
1619 __set_bit(INPUT_PROP_ACCELEROMETER, sc->sensor_dev->propbit);
1620
1621 ret = input_register_device(sc->sensor_dev);
1622 if (ret < 0)
1623 return ret;
1624
1625 return 0;
1626 }
1627
1628 /*
1629 * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
1630 * to "operational". Without this, the ps3 controller will not report any
1631 * events.
1632 */
sixaxis_set_operational_usb(struct hid_device * hdev)1633 static int sixaxis_set_operational_usb(struct hid_device *hdev)
1634 {
1635 struct sony_sc *sc = hid_get_drvdata(hdev);
1636 const int buf_size =
1637 max(SIXAXIS_REPORT_0xF2_SIZE, SIXAXIS_REPORT_0xF5_SIZE);
1638 u8 *buf;
1639 int ret;
1640
1641 buf = kmalloc(buf_size, GFP_KERNEL);
1642 if (!buf)
1643 return -ENOMEM;
1644
1645 ret = hid_hw_raw_request(hdev, 0xf2, buf, SIXAXIS_REPORT_0xF2_SIZE,
1646 HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
1647 if (ret < 0) {
1648 hid_err(hdev, "can't set operational mode: step 1\n");
1649 goto out;
1650 }
1651
1652 /*
1653 * Some compatible controllers like the Speedlink Strike FX and
1654 * Gasia need another query plus an USB interrupt to get operational.
1655 */
1656 ret = hid_hw_raw_request(hdev, 0xf5, buf, SIXAXIS_REPORT_0xF5_SIZE,
1657 HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
1658 if (ret < 0) {
1659 hid_err(hdev, "can't set operational mode: step 2\n");
1660 goto out;
1661 }
1662
1663 /*
1664 * But the USB interrupt would cause SHANWAN controllers to
1665 * start rumbling non-stop, so skip step 3 for these controllers.
1666 */
1667 if (sc->quirks & SHANWAN_GAMEPAD)
1668 goto out;
1669
1670 ret = hid_hw_output_report(hdev, buf, 1);
1671 if (ret < 0) {
1672 hid_info(hdev, "can't set operational mode: step 3, ignoring\n");
1673 ret = 0;
1674 }
1675
1676 out:
1677 kfree(buf);
1678
1679 return ret;
1680 }
1681
sixaxis_set_operational_bt(struct hid_device * hdev)1682 static int sixaxis_set_operational_bt(struct hid_device *hdev)
1683 {
1684 static const u8 report[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
1685 u8 *buf;
1686 int ret;
1687
1688 buf = kmemdup(report, sizeof(report), GFP_KERNEL);
1689 if (!buf)
1690 return -ENOMEM;
1691
1692 ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(report),
1693 HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
1694
1695 kfree(buf);
1696
1697 return ret;
1698 }
1699
1700 /*
1701 * Request DS4 calibration data for the motion sensors.
1702 * For Bluetooth this also affects the operating mode (see below).
1703 */
dualshock4_get_calibration_data(struct sony_sc * sc)1704 static int dualshock4_get_calibration_data(struct sony_sc *sc)
1705 {
1706 u8 *buf;
1707 int ret;
1708 short gyro_pitch_bias, gyro_pitch_plus, gyro_pitch_minus;
1709 short gyro_yaw_bias, gyro_yaw_plus, gyro_yaw_minus;
1710 short gyro_roll_bias, gyro_roll_plus, gyro_roll_minus;
1711 short gyro_speed_plus, gyro_speed_minus;
1712 short acc_x_plus, acc_x_minus;
1713 short acc_y_plus, acc_y_minus;
1714 short acc_z_plus, acc_z_minus;
1715 int speed_2x;
1716 int range_2g;
1717
1718 /* For Bluetooth we use a different request, which supports CRC.
1719 * Note: in Bluetooth mode feature report 0x02 also changes the state
1720 * of the controller, so that it sends input reports of type 0x11.
1721 */
1722 if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE)) {
1723 int retries;
1724
1725 buf = kmalloc(DS4_FEATURE_REPORT_0x02_SIZE, GFP_KERNEL);
1726 if (!buf)
1727 return -ENOMEM;
1728
1729 /* We should normally receive the feature report data we asked
1730 * for, but hidraw applications such as Steam can issue feature
1731 * reports as well. In particular for Dongle reconnects, Steam
1732 * and this function are competing resulting in often receiving
1733 * data for a different HID report, so retry a few times.
1734 */
1735 for (retries = 0; retries < 3; retries++) {
1736 ret = hid_hw_raw_request(sc->hdev, 0x02, buf,
1737 DS4_FEATURE_REPORT_0x02_SIZE,
1738 HID_FEATURE_REPORT,
1739 HID_REQ_GET_REPORT);
1740 if (ret < 0)
1741 goto err_stop;
1742
1743 if (buf[0] != 0x02) {
1744 if (retries < 2) {
1745 hid_warn(sc->hdev, "Retrying DualShock 4 get calibration report (0x02) request\n");
1746 continue;
1747 } else {
1748 ret = -EILSEQ;
1749 goto err_stop;
1750 }
1751 } else {
1752 break;
1753 }
1754 }
1755 } else {
1756 u8 bthdr = 0xA3;
1757 u32 crc;
1758 u32 report_crc;
1759 int retries;
1760
1761 buf = kmalloc(DS4_FEATURE_REPORT_0x05_SIZE, GFP_KERNEL);
1762 if (!buf)
1763 return -ENOMEM;
1764
1765 for (retries = 0; retries < 3; retries++) {
1766 ret = hid_hw_raw_request(sc->hdev, 0x05, buf,
1767 DS4_FEATURE_REPORT_0x05_SIZE,
1768 HID_FEATURE_REPORT,
1769 HID_REQ_GET_REPORT);
1770 if (ret < 0)
1771 goto err_stop;
1772
1773 /* CRC check */
1774 crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
1775 crc = ~crc32_le(crc, buf, DS4_FEATURE_REPORT_0x05_SIZE-4);
1776 report_crc = get_unaligned_le32(&buf[DS4_FEATURE_REPORT_0x05_SIZE-4]);
1777 if (crc != report_crc) {
1778 hid_warn(sc->hdev, "DualShock 4 calibration report's CRC check failed, received crc 0x%0x != 0x%0x\n",
1779 report_crc, crc);
1780 if (retries < 2) {
1781 hid_warn(sc->hdev, "Retrying DualShock 4 get calibration report request\n");
1782 continue;
1783 } else {
1784 ret = -EILSEQ;
1785 goto err_stop;
1786 }
1787 } else {
1788 break;
1789 }
1790 }
1791 }
1792
1793 gyro_pitch_bias = get_unaligned_le16(&buf[1]);
1794 gyro_yaw_bias = get_unaligned_le16(&buf[3]);
1795 gyro_roll_bias = get_unaligned_le16(&buf[5]);
1796 if (sc->quirks & DUALSHOCK4_CONTROLLER_USB) {
1797 gyro_pitch_plus = get_unaligned_le16(&buf[7]);
1798 gyro_pitch_minus = get_unaligned_le16(&buf[9]);
1799 gyro_yaw_plus = get_unaligned_le16(&buf[11]);
1800 gyro_yaw_minus = get_unaligned_le16(&buf[13]);
1801 gyro_roll_plus = get_unaligned_le16(&buf[15]);
1802 gyro_roll_minus = get_unaligned_le16(&buf[17]);
1803 } else {
1804 /* BT + Dongle */
1805 gyro_pitch_plus = get_unaligned_le16(&buf[7]);
1806 gyro_yaw_plus = get_unaligned_le16(&buf[9]);
1807 gyro_roll_plus = get_unaligned_le16(&buf[11]);
1808 gyro_pitch_minus = get_unaligned_le16(&buf[13]);
1809 gyro_yaw_minus = get_unaligned_le16(&buf[15]);
1810 gyro_roll_minus = get_unaligned_le16(&buf[17]);
1811 }
1812 gyro_speed_plus = get_unaligned_le16(&buf[19]);
1813 gyro_speed_minus = get_unaligned_le16(&buf[21]);
1814 acc_x_plus = get_unaligned_le16(&buf[23]);
1815 acc_x_minus = get_unaligned_le16(&buf[25]);
1816 acc_y_plus = get_unaligned_le16(&buf[27]);
1817 acc_y_minus = get_unaligned_le16(&buf[29]);
1818 acc_z_plus = get_unaligned_le16(&buf[31]);
1819 acc_z_minus = get_unaligned_le16(&buf[33]);
1820
1821 /* Set gyroscope calibration and normalization parameters.
1822 * Data values will be normalized to 1/DS4_GYRO_RES_PER_DEG_S degree/s.
1823 */
1824 speed_2x = (gyro_speed_plus + gyro_speed_minus);
1825 sc->ds4_calib_data[0].abs_code = ABS_RX;
1826 sc->ds4_calib_data[0].bias = gyro_pitch_bias;
1827 sc->ds4_calib_data[0].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
1828 sc->ds4_calib_data[0].sens_denom = gyro_pitch_plus - gyro_pitch_minus;
1829
1830 sc->ds4_calib_data[1].abs_code = ABS_RY;
1831 sc->ds4_calib_data[1].bias = gyro_yaw_bias;
1832 sc->ds4_calib_data[1].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
1833 sc->ds4_calib_data[1].sens_denom = gyro_yaw_plus - gyro_yaw_minus;
1834
1835 sc->ds4_calib_data[2].abs_code = ABS_RZ;
1836 sc->ds4_calib_data[2].bias = gyro_roll_bias;
1837 sc->ds4_calib_data[2].sens_numer = speed_2x*DS4_GYRO_RES_PER_DEG_S;
1838 sc->ds4_calib_data[2].sens_denom = gyro_roll_plus - gyro_roll_minus;
1839
1840 /* Set accelerometer calibration and normalization parameters.
1841 * Data values will be normalized to 1/DS4_ACC_RES_PER_G G.
1842 */
1843 range_2g = acc_x_plus - acc_x_minus;
1844 sc->ds4_calib_data[3].abs_code = ABS_X;
1845 sc->ds4_calib_data[3].bias = acc_x_plus - range_2g / 2;
1846 sc->ds4_calib_data[3].sens_numer = 2*DS4_ACC_RES_PER_G;
1847 sc->ds4_calib_data[3].sens_denom = range_2g;
1848
1849 range_2g = acc_y_plus - acc_y_minus;
1850 sc->ds4_calib_data[4].abs_code = ABS_Y;
1851 sc->ds4_calib_data[4].bias = acc_y_plus - range_2g / 2;
1852 sc->ds4_calib_data[4].sens_numer = 2*DS4_ACC_RES_PER_G;
1853 sc->ds4_calib_data[4].sens_denom = range_2g;
1854
1855 range_2g = acc_z_plus - acc_z_minus;
1856 sc->ds4_calib_data[5].abs_code = ABS_Z;
1857 sc->ds4_calib_data[5].bias = acc_z_plus - range_2g / 2;
1858 sc->ds4_calib_data[5].sens_numer = 2*DS4_ACC_RES_PER_G;
1859 sc->ds4_calib_data[5].sens_denom = range_2g;
1860
1861 err_stop:
1862 kfree(buf);
1863 return ret;
1864 }
1865
dualshock4_calibration_work(struct work_struct * work)1866 static void dualshock4_calibration_work(struct work_struct *work)
1867 {
1868 struct sony_sc *sc = container_of(work, struct sony_sc, hotplug_worker);
1869 unsigned long flags;
1870 enum ds4_dongle_state dongle_state;
1871 int ret;
1872
1873 ret = dualshock4_get_calibration_data(sc);
1874 if (ret < 0) {
1875 /* This call is very unlikely to fail for the dongle. When it
1876 * fails we are probably in a very bad state, so mark the
1877 * dongle as disabled. We will re-enable the dongle if a new
1878 * DS4 hotplug is detect from sony_raw_event as any issues
1879 * are likely resolved then (the dongle is quite stupid).
1880 */
1881 hid_err(sc->hdev, "DualShock 4 USB dongle: calibration failed, disabling device\n");
1882 dongle_state = DONGLE_DISABLED;
1883 } else {
1884 hid_info(sc->hdev, "DualShock 4 USB dongle: calibration completed\n");
1885 dongle_state = DONGLE_CONNECTED;
1886 }
1887
1888 spin_lock_irqsave(&sc->lock, flags);
1889 sc->ds4_dongle_state = dongle_state;
1890 spin_unlock_irqrestore(&sc->lock, flags);
1891 }
1892
dualshock4_get_version_info(struct sony_sc * sc)1893 static int dualshock4_get_version_info(struct sony_sc *sc)
1894 {
1895 u8 *buf;
1896 int ret;
1897
1898 buf = kmalloc(DS4_FEATURE_REPORT_0xA3_SIZE, GFP_KERNEL);
1899 if (!buf)
1900 return -ENOMEM;
1901
1902 ret = hid_hw_raw_request(sc->hdev, 0xA3, buf,
1903 DS4_FEATURE_REPORT_0xA3_SIZE,
1904 HID_FEATURE_REPORT,
1905 HID_REQ_GET_REPORT);
1906 if (ret < 0) {
1907 kfree(buf);
1908 return ret;
1909 }
1910
1911 sc->hw_version = get_unaligned_le16(&buf[35]);
1912 sc->fw_version = get_unaligned_le16(&buf[41]);
1913
1914 kfree(buf);
1915 return 0;
1916 }
1917
sixaxis_set_leds_from_id(struct sony_sc * sc)1918 static void sixaxis_set_leds_from_id(struct sony_sc *sc)
1919 {
1920 static const u8 sixaxis_leds[10][4] = {
1921 { 0x01, 0x00, 0x00, 0x00 },
1922 { 0x00, 0x01, 0x00, 0x00 },
1923 { 0x00, 0x00, 0x01, 0x00 },
1924 { 0x00, 0x00, 0x00, 0x01 },
1925 { 0x01, 0x00, 0x00, 0x01 },
1926 { 0x00, 0x01, 0x00, 0x01 },
1927 { 0x00, 0x00, 0x01, 0x01 },
1928 { 0x01, 0x00, 0x01, 0x01 },
1929 { 0x00, 0x01, 0x01, 0x01 },
1930 { 0x01, 0x01, 0x01, 0x01 }
1931 };
1932
1933 int id = sc->device_id;
1934
1935 BUILD_BUG_ON(MAX_LEDS < ARRAY_SIZE(sixaxis_leds[0]));
1936
1937 if (id < 0)
1938 return;
1939
1940 id %= 10;
1941 memcpy(sc->led_state, sixaxis_leds[id], sizeof(sixaxis_leds[id]));
1942 }
1943
dualshock4_set_leds_from_id(struct sony_sc * sc)1944 static void dualshock4_set_leds_from_id(struct sony_sc *sc)
1945 {
1946 /* The first 4 color/index entries match what the PS4 assigns */
1947 static const u8 color_code[7][3] = {
1948 /* Blue */ { 0x00, 0x00, 0x40 },
1949 /* Red */ { 0x40, 0x00, 0x00 },
1950 /* Green */ { 0x00, 0x40, 0x00 },
1951 /* Pink */ { 0x20, 0x00, 0x20 },
1952 /* Orange */ { 0x02, 0x01, 0x00 },
1953 /* Teal */ { 0x00, 0x01, 0x01 },
1954 /* White */ { 0x01, 0x01, 0x01 }
1955 };
1956
1957 int id = sc->device_id;
1958
1959 BUILD_BUG_ON(MAX_LEDS < ARRAY_SIZE(color_code[0]));
1960
1961 if (id < 0)
1962 return;
1963
1964 id %= 7;
1965 memcpy(sc->led_state, color_code[id], sizeof(color_code[id]));
1966 }
1967
buzz_set_leds(struct sony_sc * sc)1968 static void buzz_set_leds(struct sony_sc *sc)
1969 {
1970 struct hid_device *hdev = sc->hdev;
1971 struct list_head *report_list =
1972 &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
1973 struct hid_report *report = list_entry(report_list->next,
1974 struct hid_report, list);
1975 s32 *value = report->field[0]->value;
1976
1977 BUILD_BUG_ON(MAX_LEDS < 4);
1978
1979 value[0] = 0x00;
1980 value[1] = sc->led_state[0] ? 0xff : 0x00;
1981 value[2] = sc->led_state[1] ? 0xff : 0x00;
1982 value[3] = sc->led_state[2] ? 0xff : 0x00;
1983 value[4] = sc->led_state[3] ? 0xff : 0x00;
1984 value[5] = 0x00;
1985 value[6] = 0x00;
1986 hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
1987 }
1988
sony_set_leds(struct sony_sc * sc)1989 static void sony_set_leds(struct sony_sc *sc)
1990 {
1991 if (!(sc->quirks & BUZZ_CONTROLLER))
1992 sony_schedule_work(sc, SONY_WORKER_STATE);
1993 else
1994 buzz_set_leds(sc);
1995 }
1996
sony_led_set_brightness(struct led_classdev * led,enum led_brightness value)1997 static void sony_led_set_brightness(struct led_classdev *led,
1998 enum led_brightness value)
1999 {
2000 struct device *dev = led->dev->parent;
2001 struct hid_device *hdev = to_hid_device(dev);
2002 struct sony_sc *drv_data;
2003
2004 int n;
2005 int force_update;
2006
2007 drv_data = hid_get_drvdata(hdev);
2008 if (!drv_data) {
2009 hid_err(hdev, "No device data\n");
2010 return;
2011 }
2012
2013 /*
2014 * The Sixaxis on USB will override any LED settings sent to it
2015 * and keep flashing all of the LEDs until the PS button is pressed.
2016 * Updates, even if redundant, must be always be sent to the
2017 * controller to avoid having to toggle the state of an LED just to
2018 * stop the flashing later on.
2019 */
2020 force_update = !!(drv_data->quirks & SIXAXIS_CONTROLLER_USB);
2021
2022 for (n = 0; n < drv_data->led_count; n++) {
2023 if (led == drv_data->leds[n] && (force_update ||
2024 (value != drv_data->led_state[n] ||
2025 drv_data->led_delay_on[n] ||
2026 drv_data->led_delay_off[n]))) {
2027
2028 drv_data->led_state[n] = value;
2029
2030 /* Setting the brightness stops the blinking */
2031 drv_data->led_delay_on[n] = 0;
2032 drv_data->led_delay_off[n] = 0;
2033
2034 sony_set_leds(drv_data);
2035 break;
2036 }
2037 }
2038 }
2039
sony_led_get_brightness(struct led_classdev * led)2040 static enum led_brightness sony_led_get_brightness(struct led_classdev *led)
2041 {
2042 struct device *dev = led->dev->parent;
2043 struct hid_device *hdev = to_hid_device(dev);
2044 struct sony_sc *drv_data;
2045
2046 int n;
2047
2048 drv_data = hid_get_drvdata(hdev);
2049 if (!drv_data) {
2050 hid_err(hdev, "No device data\n");
2051 return LED_OFF;
2052 }
2053
2054 for (n = 0; n < drv_data->led_count; n++) {
2055 if (led == drv_data->leds[n])
2056 return drv_data->led_state[n];
2057 }
2058
2059 return LED_OFF;
2060 }
2061
sony_led_blink_set(struct led_classdev * led,unsigned long * delay_on,unsigned long * delay_off)2062 static int sony_led_blink_set(struct led_classdev *led, unsigned long *delay_on,
2063 unsigned long *delay_off)
2064 {
2065 struct device *dev = led->dev->parent;
2066 struct hid_device *hdev = to_hid_device(dev);
2067 struct sony_sc *drv_data = hid_get_drvdata(hdev);
2068 int n;
2069 u8 new_on, new_off;
2070
2071 if (!drv_data) {
2072 hid_err(hdev, "No device data\n");
2073 return -EINVAL;
2074 }
2075
2076 /* Max delay is 255 deciseconds or 2550 milliseconds */
2077 if (*delay_on > 2550)
2078 *delay_on = 2550;
2079 if (*delay_off > 2550)
2080 *delay_off = 2550;
2081
2082 /* Blink at 1 Hz if both values are zero */
2083 if (!*delay_on && !*delay_off)
2084 *delay_on = *delay_off = 500;
2085
2086 new_on = *delay_on / 10;
2087 new_off = *delay_off / 10;
2088
2089 for (n = 0; n < drv_data->led_count; n++) {
2090 if (led == drv_data->leds[n])
2091 break;
2092 }
2093
2094 /* This LED is not registered on this device */
2095 if (n >= drv_data->led_count)
2096 return -EINVAL;
2097
2098 /* Don't schedule work if the values didn't change */
2099 if (new_on != drv_data->led_delay_on[n] ||
2100 new_off != drv_data->led_delay_off[n]) {
2101 drv_data->led_delay_on[n] = new_on;
2102 drv_data->led_delay_off[n] = new_off;
2103 sony_schedule_work(drv_data, SONY_WORKER_STATE);
2104 }
2105
2106 return 0;
2107 }
2108
sony_leds_init(struct sony_sc * sc)2109 static int sony_leds_init(struct sony_sc *sc)
2110 {
2111 struct hid_device *hdev = sc->hdev;
2112 int n, ret = 0;
2113 int use_ds4_names;
2114 struct led_classdev *led;
2115 size_t name_sz;
2116 char *name;
2117 size_t name_len;
2118 const char *name_fmt;
2119 static const char * const ds4_name_str[] = { "red", "green", "blue",
2120 "global" };
2121 u8 max_brightness[MAX_LEDS] = { [0 ... (MAX_LEDS - 1)] = 1 };
2122 u8 use_hw_blink[MAX_LEDS] = { 0 };
2123
2124 BUG_ON(!(sc->quirks & SONY_LED_SUPPORT));
2125
2126 if (sc->quirks & BUZZ_CONTROLLER) {
2127 sc->led_count = 4;
2128 use_ds4_names = 0;
2129 name_len = strlen("::buzz#");
2130 name_fmt = "%s::buzz%d";
2131 /* Validate expected report characteristics. */
2132 if (!hid_validate_values(hdev, HID_OUTPUT_REPORT, 0, 0, 7))
2133 return -ENODEV;
2134 } else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
2135 dualshock4_set_leds_from_id(sc);
2136 sc->led_state[3] = 1;
2137 sc->led_count = 4;
2138 memset(max_brightness, 255, 3);
2139 use_hw_blink[3] = 1;
2140 use_ds4_names = 1;
2141 name_len = 0;
2142 name_fmt = "%s:%s";
2143 } else if (sc->quirks & MOTION_CONTROLLER) {
2144 sc->led_count = 3;
2145 memset(max_brightness, 255, 3);
2146 use_ds4_names = 1;
2147 name_len = 0;
2148 name_fmt = "%s:%s";
2149 } else if (sc->quirks & NAVIGATION_CONTROLLER) {
2150 static const u8 navigation_leds[4] = {0x01, 0x00, 0x00, 0x00};
2151
2152 memcpy(sc->led_state, navigation_leds, sizeof(navigation_leds));
2153 sc->led_count = 1;
2154 memset(use_hw_blink, 1, 4);
2155 use_ds4_names = 0;
2156 name_len = strlen("::sony#");
2157 name_fmt = "%s::sony%d";
2158 } else {
2159 sixaxis_set_leds_from_id(sc);
2160 sc->led_count = 4;
2161 memset(use_hw_blink, 1, 4);
2162 use_ds4_names = 0;
2163 name_len = strlen("::sony#");
2164 name_fmt = "%s::sony%d";
2165 }
2166
2167 /*
2168 * Clear LEDs as we have no way of reading their initial state. This is
2169 * only relevant if the driver is loaded after somebody actively set the
2170 * LEDs to on
2171 */
2172 sony_set_leds(sc);
2173
2174 name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1;
2175
2176 for (n = 0; n < sc->led_count; n++) {
2177
2178 if (use_ds4_names)
2179 name_sz = strlen(dev_name(&hdev->dev)) + strlen(ds4_name_str[n]) + 2;
2180
2181 led = devm_kzalloc(&hdev->dev, sizeof(struct led_classdev) + name_sz, GFP_KERNEL);
2182 if (!led) {
2183 hid_err(hdev, "Couldn't allocate memory for LED %d\n", n);
2184 return -ENOMEM;
2185 }
2186
2187 name = (void *)(&led[1]);
2188 if (use_ds4_names)
2189 snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev),
2190 ds4_name_str[n]);
2191 else
2192 snprintf(name, name_sz, name_fmt, dev_name(&hdev->dev), n + 1);
2193 led->name = name;
2194 led->brightness = sc->led_state[n];
2195 led->max_brightness = max_brightness[n];
2196 led->flags = LED_CORE_SUSPENDRESUME;
2197 led->brightness_get = sony_led_get_brightness;
2198 led->brightness_set = sony_led_set_brightness;
2199
2200 if (use_hw_blink[n])
2201 led->blink_set = sony_led_blink_set;
2202
2203 sc->leds[n] = led;
2204
2205 ret = devm_led_classdev_register(&hdev->dev, led);
2206 if (ret) {
2207 hid_err(hdev, "Failed to register LED %d\n", n);
2208 return ret;
2209 }
2210 }
2211
2212 return 0;
2213 }
2214
sixaxis_send_output_report(struct sony_sc * sc)2215 static void sixaxis_send_output_report(struct sony_sc *sc)
2216 {
2217 static const union sixaxis_output_report_01 default_report = {
2218 .buf = {
2219 0x01,
2220 0x01, 0xff, 0x00, 0xff, 0x00,
2221 0x00, 0x00, 0x00, 0x00, 0x00,
2222 0xff, 0x27, 0x10, 0x00, 0x32,
2223 0xff, 0x27, 0x10, 0x00, 0x32,
2224 0xff, 0x27, 0x10, 0x00, 0x32,
2225 0xff, 0x27, 0x10, 0x00, 0x32,
2226 0x00, 0x00, 0x00, 0x00, 0x00
2227 }
2228 };
2229 struct sixaxis_output_report *report =
2230 (struct sixaxis_output_report *)sc->output_report_dmabuf;
2231 int n;
2232
2233 /* Initialize the report with default values */
2234 memcpy(report, &default_report, sizeof(struct sixaxis_output_report));
2235
2236 #ifdef CONFIG_SONY_FF
2237 report->rumble.right_motor_on = sc->right ? 1 : 0;
2238 report->rumble.left_motor_force = sc->left;
2239 #endif
2240
2241 report->leds_bitmap |= sc->led_state[0] << 1;
2242 report->leds_bitmap |= sc->led_state[1] << 2;
2243 report->leds_bitmap |= sc->led_state[2] << 3;
2244 report->leds_bitmap |= sc->led_state[3] << 4;
2245
2246 /* Set flag for all leds off, required for 3rd party INTEC controller */
2247 if ((report->leds_bitmap & 0x1E) == 0)
2248 report->leds_bitmap |= 0x20;
2249
2250 /*
2251 * The LEDs in the report are indexed in reverse order to their
2252 * corresponding light on the controller.
2253 * Index 0 = LED 4, index 1 = LED 3, etc...
2254 *
2255 * In the case of both delay values being zero (blinking disabled) the
2256 * default report values should be used or the controller LED will be
2257 * always off.
2258 */
2259 for (n = 0; n < 4; n++) {
2260 if (sc->led_delay_on[n] || sc->led_delay_off[n]) {
2261 report->led[3 - n].duty_off = sc->led_delay_off[n];
2262 report->led[3 - n].duty_on = sc->led_delay_on[n];
2263 }
2264 }
2265
2266 /* SHANWAN controllers require output reports via intr channel */
2267 if (sc->quirks & SHANWAN_GAMEPAD)
2268 hid_hw_output_report(sc->hdev, (u8 *)report,
2269 sizeof(struct sixaxis_output_report));
2270 else
2271 hid_hw_raw_request(sc->hdev, report->report_id, (u8 *)report,
2272 sizeof(struct sixaxis_output_report),
2273 HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
2274 }
2275
dualshock4_send_output_report(struct sony_sc * sc)2276 static void dualshock4_send_output_report(struct sony_sc *sc)
2277 {
2278 struct hid_device *hdev = sc->hdev;
2279 u8 *buf = sc->output_report_dmabuf;
2280 int offset;
2281
2282 /*
2283 * NOTE: The lower 6 bits of buf[1] field of the Bluetooth report
2284 * control the interval at which Dualshock 4 reports data:
2285 * 0x00 - 1ms
2286 * 0x01 - 1ms
2287 * 0x02 - 2ms
2288 * 0x3E - 62ms
2289 * 0x3F - disabled
2290 */
2291 if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE)) {
2292 memset(buf, 0, DS4_OUTPUT_REPORT_0x05_SIZE);
2293 buf[0] = 0x05;
2294 buf[1] = 0x07; /* blink + LEDs + motor */
2295 offset = 4;
2296 } else {
2297 memset(buf, 0, DS4_OUTPUT_REPORT_0x11_SIZE);
2298 buf[0] = 0x11;
2299 buf[1] = 0xC0 /* HID + CRC */ | sc->ds4_bt_poll_interval;
2300 buf[3] = 0x07; /* blink + LEDs + motor */
2301 offset = 6;
2302 }
2303
2304 #ifdef CONFIG_SONY_FF
2305 buf[offset++] = sc->right;
2306 buf[offset++] = sc->left;
2307 #else
2308 offset += 2;
2309 #endif
2310
2311 /* LED 3 is the global control */
2312 if (sc->led_state[3]) {
2313 buf[offset++] = sc->led_state[0];
2314 buf[offset++] = sc->led_state[1];
2315 buf[offset++] = sc->led_state[2];
2316 } else {
2317 offset += 3;
2318 }
2319
2320 /* If both delay values are zero the DualShock 4 disables blinking. */
2321 buf[offset++] = sc->led_delay_on[3];
2322 buf[offset++] = sc->led_delay_off[3];
2323
2324 if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE))
2325 hid_hw_output_report(hdev, buf, DS4_OUTPUT_REPORT_0x05_SIZE);
2326 else {
2327 /* CRC generation */
2328 u8 bthdr = 0xA2;
2329 u32 crc;
2330
2331 crc = crc32_le(0xFFFFFFFF, &bthdr, 1);
2332 crc = ~crc32_le(crc, buf, DS4_OUTPUT_REPORT_0x11_SIZE-4);
2333 put_unaligned_le32(crc, &buf[74]);
2334 hid_hw_output_report(hdev, buf, DS4_OUTPUT_REPORT_0x11_SIZE);
2335 }
2336 }
2337
motion_send_output_report(struct sony_sc * sc)2338 static void motion_send_output_report(struct sony_sc *sc)
2339 {
2340 struct hid_device *hdev = sc->hdev;
2341 struct motion_output_report_02 *report =
2342 (struct motion_output_report_02 *)sc->output_report_dmabuf;
2343
2344 memset(report, 0, MOTION_REPORT_0x02_SIZE);
2345
2346 report->type = 0x02; /* set leds */
2347 report->r = sc->led_state[0];
2348 report->g = sc->led_state[1];
2349 report->b = sc->led_state[2];
2350
2351 #ifdef CONFIG_SONY_FF
2352 report->rumble = max(sc->right, sc->left);
2353 #endif
2354
2355 hid_hw_output_report(hdev, (u8 *)report, MOTION_REPORT_0x02_SIZE);
2356 }
2357
sony_send_output_report(struct sony_sc * sc)2358 static inline void sony_send_output_report(struct sony_sc *sc)
2359 {
2360 if (sc->send_output_report)
2361 sc->send_output_report(sc);
2362 }
2363
sony_state_worker(struct work_struct * work)2364 static void sony_state_worker(struct work_struct *work)
2365 {
2366 struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
2367
2368 sc->send_output_report(sc);
2369 }
2370
sony_allocate_output_report(struct sony_sc * sc)2371 static int sony_allocate_output_report(struct sony_sc *sc)
2372 {
2373 if ((sc->quirks & SIXAXIS_CONTROLLER) ||
2374 (sc->quirks & NAVIGATION_CONTROLLER))
2375 sc->output_report_dmabuf =
2376 devm_kmalloc(&sc->hdev->dev,
2377 sizeof(union sixaxis_output_report_01),
2378 GFP_KERNEL);
2379 else if (sc->quirks & DUALSHOCK4_CONTROLLER_BT)
2380 sc->output_report_dmabuf = devm_kmalloc(&sc->hdev->dev,
2381 DS4_OUTPUT_REPORT_0x11_SIZE,
2382 GFP_KERNEL);
2383 else if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE))
2384 sc->output_report_dmabuf = devm_kmalloc(&sc->hdev->dev,
2385 DS4_OUTPUT_REPORT_0x05_SIZE,
2386 GFP_KERNEL);
2387 else if (sc->quirks & MOTION_CONTROLLER)
2388 sc->output_report_dmabuf = devm_kmalloc(&sc->hdev->dev,
2389 MOTION_REPORT_0x02_SIZE,
2390 GFP_KERNEL);
2391 else
2392 return 0;
2393
2394 if (!sc->output_report_dmabuf)
2395 return -ENOMEM;
2396
2397 return 0;
2398 }
2399
2400 #ifdef CONFIG_SONY_FF
sony_play_effect(struct input_dev * dev,void * data,struct ff_effect * effect)2401 static int sony_play_effect(struct input_dev *dev, void *data,
2402 struct ff_effect *effect)
2403 {
2404 struct hid_device *hid = input_get_drvdata(dev);
2405 struct sony_sc *sc = hid_get_drvdata(hid);
2406
2407 if (effect->type != FF_RUMBLE)
2408 return 0;
2409
2410 sc->left = effect->u.rumble.strong_magnitude / 256;
2411 sc->right = effect->u.rumble.weak_magnitude / 256;
2412
2413 sony_schedule_work(sc, SONY_WORKER_STATE);
2414 return 0;
2415 }
2416
sony_init_ff(struct sony_sc * sc)2417 static int sony_init_ff(struct sony_sc *sc)
2418 {
2419 struct hid_input *hidinput;
2420 struct input_dev *input_dev;
2421
2422 if (list_empty(&sc->hdev->inputs)) {
2423 hid_err(sc->hdev, "no inputs found\n");
2424 return -ENODEV;
2425 }
2426 hidinput = list_entry(sc->hdev->inputs.next, struct hid_input, list);
2427 input_dev = hidinput->input;
2428
2429 input_set_capability(input_dev, EV_FF, FF_RUMBLE);
2430 return input_ff_create_memless(input_dev, NULL, sony_play_effect);
2431 }
2432
2433 #else
sony_init_ff(struct sony_sc * sc)2434 static int sony_init_ff(struct sony_sc *sc)
2435 {
2436 return 0;
2437 }
2438
2439 #endif
2440
sony_battery_get_property(struct power_supply * psy,enum power_supply_property psp,union power_supply_propval * val)2441 static int sony_battery_get_property(struct power_supply *psy,
2442 enum power_supply_property psp,
2443 union power_supply_propval *val)
2444 {
2445 struct sony_sc *sc = power_supply_get_drvdata(psy);
2446 unsigned long flags;
2447 int ret = 0;
2448 u8 battery_capacity;
2449 int battery_status;
2450
2451 spin_lock_irqsave(&sc->lock, flags);
2452 battery_capacity = sc->battery_capacity;
2453 battery_status = sc->battery_status;
2454 spin_unlock_irqrestore(&sc->lock, flags);
2455
2456 switch (psp) {
2457 case POWER_SUPPLY_PROP_PRESENT:
2458 val->intval = 1;
2459 break;
2460 case POWER_SUPPLY_PROP_SCOPE:
2461 val->intval = POWER_SUPPLY_SCOPE_DEVICE;
2462 break;
2463 case POWER_SUPPLY_PROP_CAPACITY:
2464 val->intval = battery_capacity;
2465 break;
2466 case POWER_SUPPLY_PROP_STATUS:
2467 val->intval = battery_status;
2468 break;
2469 default:
2470 ret = -EINVAL;
2471 break;
2472 }
2473 return ret;
2474 }
2475
sony_battery_probe(struct sony_sc * sc,int append_dev_id)2476 static int sony_battery_probe(struct sony_sc *sc, int append_dev_id)
2477 {
2478 const char *battery_str_fmt = append_dev_id ?
2479 "sony_controller_battery_%pMR_%i" :
2480 "sony_controller_battery_%pMR";
2481 struct power_supply_config psy_cfg = { .drv_data = sc, };
2482 struct hid_device *hdev = sc->hdev;
2483 int ret;
2484
2485 /*
2486 * Set the default battery level to 100% to avoid low battery warnings
2487 * if the battery is polled before the first device report is received.
2488 */
2489 sc->battery_capacity = 100;
2490
2491 sc->battery_desc.properties = sony_battery_props;
2492 sc->battery_desc.num_properties = ARRAY_SIZE(sony_battery_props);
2493 sc->battery_desc.get_property = sony_battery_get_property;
2494 sc->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY;
2495 sc->battery_desc.use_for_apm = 0;
2496 sc->battery_desc.name = devm_kasprintf(&hdev->dev, GFP_KERNEL,
2497 battery_str_fmt, sc->mac_address, sc->device_id);
2498 if (!sc->battery_desc.name)
2499 return -ENOMEM;
2500
2501 sc->battery = devm_power_supply_register(&hdev->dev, &sc->battery_desc,
2502 &psy_cfg);
2503 if (IS_ERR(sc->battery)) {
2504 ret = PTR_ERR(sc->battery);
2505 hid_err(hdev, "Unable to register battery device\n");
2506 return ret;
2507 }
2508
2509 power_supply_powers(sc->battery, &hdev->dev);
2510 return 0;
2511 }
2512
2513 /*
2514 * If a controller is plugged in via USB while already connected via Bluetooth
2515 * it will show up as two devices. A global list of connected controllers and
2516 * their MAC addresses is maintained to ensure that a device is only connected
2517 * once.
2518 *
2519 * Some USB-only devices masquerade as Sixaxis controllers and all have the
2520 * same dummy Bluetooth address, so a comparison of the connection type is
2521 * required. Devices are only rejected in the case where two devices have
2522 * matching Bluetooth addresses on different bus types.
2523 */
sony_compare_connection_type(struct sony_sc * sc0,struct sony_sc * sc1)2524 static inline int sony_compare_connection_type(struct sony_sc *sc0,
2525 struct sony_sc *sc1)
2526 {
2527 const int sc0_not_bt = !(sc0->quirks & SONY_BT_DEVICE);
2528 const int sc1_not_bt = !(sc1->quirks & SONY_BT_DEVICE);
2529
2530 return sc0_not_bt == sc1_not_bt;
2531 }
2532
sony_check_add_dev_list(struct sony_sc * sc)2533 static int sony_check_add_dev_list(struct sony_sc *sc)
2534 {
2535 struct sony_sc *entry;
2536 unsigned long flags;
2537 int ret;
2538
2539 spin_lock_irqsave(&sony_dev_list_lock, flags);
2540
2541 list_for_each_entry(entry, &sony_device_list, list_node) {
2542 ret = memcmp(sc->mac_address, entry->mac_address,
2543 sizeof(sc->mac_address));
2544 if (!ret) {
2545 if (sony_compare_connection_type(sc, entry)) {
2546 ret = 1;
2547 } else {
2548 ret = -EEXIST;
2549 hid_info(sc->hdev,
2550 "controller with MAC address %pMR already connected\n",
2551 sc->mac_address);
2552 }
2553 goto unlock;
2554 }
2555 }
2556
2557 ret = 0;
2558 list_add(&(sc->list_node), &sony_device_list);
2559
2560 unlock:
2561 spin_unlock_irqrestore(&sony_dev_list_lock, flags);
2562 return ret;
2563 }
2564
sony_remove_dev_list(struct sony_sc * sc)2565 static void sony_remove_dev_list(struct sony_sc *sc)
2566 {
2567 unsigned long flags;
2568
2569 if (sc->list_node.next) {
2570 spin_lock_irqsave(&sony_dev_list_lock, flags);
2571 list_del(&(sc->list_node));
2572 spin_unlock_irqrestore(&sony_dev_list_lock, flags);
2573 }
2574 }
2575
sony_get_bt_devaddr(struct sony_sc * sc)2576 static int sony_get_bt_devaddr(struct sony_sc *sc)
2577 {
2578 int ret;
2579
2580 /* HIDP stores the device MAC address as a string in the uniq field. */
2581 ret = strlen(sc->hdev->uniq);
2582 if (ret != 17)
2583 return -EINVAL;
2584
2585 ret = sscanf(sc->hdev->uniq,
2586 "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
2587 &sc->mac_address[5], &sc->mac_address[4], &sc->mac_address[3],
2588 &sc->mac_address[2], &sc->mac_address[1], &sc->mac_address[0]);
2589
2590 if (ret != 6)
2591 return -EINVAL;
2592
2593 return 0;
2594 }
2595
sony_check_add(struct sony_sc * sc)2596 static int sony_check_add(struct sony_sc *sc)
2597 {
2598 u8 *buf = NULL;
2599 int n, ret;
2600
2601 if ((sc->quirks & DUALSHOCK4_CONTROLLER_BT) ||
2602 (sc->quirks & MOTION_CONTROLLER_BT) ||
2603 (sc->quirks & NAVIGATION_CONTROLLER_BT) ||
2604 (sc->quirks & SIXAXIS_CONTROLLER_BT)) {
2605 /*
2606 * sony_get_bt_devaddr() attempts to parse the Bluetooth MAC
2607 * address from the uniq string where HIDP stores it.
2608 * As uniq cannot be guaranteed to be a MAC address in all cases
2609 * a failure of this function should not prevent the connection.
2610 */
2611 if (sony_get_bt_devaddr(sc) < 0) {
2612 hid_warn(sc->hdev, "UNIQ does not contain a MAC address; duplicate check skipped\n");
2613 return 0;
2614 }
2615 } else if (sc->quirks & (DUALSHOCK4_CONTROLLER_USB | DUALSHOCK4_DONGLE)) {
2616 buf = kmalloc(DS4_FEATURE_REPORT_0x81_SIZE, GFP_KERNEL);
2617 if (!buf)
2618 return -ENOMEM;
2619
2620 /*
2621 * The MAC address of a DS4 controller connected via USB can be
2622 * retrieved with feature report 0x81. The address begins at
2623 * offset 1.
2624 */
2625 ret = hid_hw_raw_request(sc->hdev, 0x81, buf,
2626 DS4_FEATURE_REPORT_0x81_SIZE, HID_FEATURE_REPORT,
2627 HID_REQ_GET_REPORT);
2628
2629 if (ret != DS4_FEATURE_REPORT_0x81_SIZE) {
2630 hid_err(sc->hdev, "failed to retrieve feature report 0x81 with the DualShock 4 MAC address\n");
2631 ret = ret < 0 ? ret : -EINVAL;
2632 goto out_free;
2633 }
2634
2635 memcpy(sc->mac_address, &buf[1], sizeof(sc->mac_address));
2636
2637 snprintf(sc->hdev->uniq, sizeof(sc->hdev->uniq),
2638 "%pMR", sc->mac_address);
2639 } else if ((sc->quirks & SIXAXIS_CONTROLLER_USB) ||
2640 (sc->quirks & NAVIGATION_CONTROLLER_USB)) {
2641 buf = kmalloc(SIXAXIS_REPORT_0xF2_SIZE, GFP_KERNEL);
2642 if (!buf)
2643 return -ENOMEM;
2644
2645 /*
2646 * The MAC address of a Sixaxis controller connected via USB can
2647 * be retrieved with feature report 0xf2. The address begins at
2648 * offset 4.
2649 */
2650 ret = hid_hw_raw_request(sc->hdev, 0xf2, buf,
2651 SIXAXIS_REPORT_0xF2_SIZE, HID_FEATURE_REPORT,
2652 HID_REQ_GET_REPORT);
2653
2654 if (ret != SIXAXIS_REPORT_0xF2_SIZE) {
2655 hid_err(sc->hdev, "failed to retrieve feature report 0xf2 with the Sixaxis MAC address\n");
2656 ret = ret < 0 ? ret : -EINVAL;
2657 goto out_free;
2658 }
2659
2660 /*
2661 * The Sixaxis device MAC in the report is big-endian and must
2662 * be byte-swapped.
2663 */
2664 for (n = 0; n < 6; n++)
2665 sc->mac_address[5-n] = buf[4+n];
2666
2667 snprintf(sc->hdev->uniq, sizeof(sc->hdev->uniq),
2668 "%pMR", sc->mac_address);
2669 } else {
2670 return 0;
2671 }
2672
2673 ret = sony_check_add_dev_list(sc);
2674
2675 out_free:
2676
2677 kfree(buf);
2678
2679 return ret;
2680 }
2681
sony_set_device_id(struct sony_sc * sc)2682 static int sony_set_device_id(struct sony_sc *sc)
2683 {
2684 int ret;
2685
2686 /*
2687 * Only DualShock 4 or Sixaxis controllers get an id.
2688 * All others are set to -1.
2689 */
2690 if ((sc->quirks & SIXAXIS_CONTROLLER) ||
2691 (sc->quirks & DUALSHOCK4_CONTROLLER)) {
2692 ret = ida_simple_get(&sony_device_id_allocator, 0, 0,
2693 GFP_KERNEL);
2694 if (ret < 0) {
2695 sc->device_id = -1;
2696 return ret;
2697 }
2698 sc->device_id = ret;
2699 } else {
2700 sc->device_id = -1;
2701 }
2702
2703 return 0;
2704 }
2705
sony_release_device_id(struct sony_sc * sc)2706 static void sony_release_device_id(struct sony_sc *sc)
2707 {
2708 if (sc->device_id >= 0) {
2709 ida_simple_remove(&sony_device_id_allocator, sc->device_id);
2710 sc->device_id = -1;
2711 }
2712 }
2713
sony_init_output_report(struct sony_sc * sc,void (* send_output_report)(struct sony_sc *))2714 static inline void sony_init_output_report(struct sony_sc *sc,
2715 void (*send_output_report)(struct sony_sc *))
2716 {
2717 sc->send_output_report = send_output_report;
2718
2719 if (!sc->state_worker_initialized)
2720 INIT_WORK(&sc->state_worker, sony_state_worker);
2721
2722 sc->state_worker_initialized = 1;
2723 }
2724
sony_cancel_work_sync(struct sony_sc * sc)2725 static inline void sony_cancel_work_sync(struct sony_sc *sc)
2726 {
2727 unsigned long flags;
2728
2729 if (sc->hotplug_worker_initialized)
2730 cancel_work_sync(&sc->hotplug_worker);
2731 if (sc->state_worker_initialized) {
2732 spin_lock_irqsave(&sc->lock, flags);
2733 sc->state_worker_initialized = 0;
2734 spin_unlock_irqrestore(&sc->lock, flags);
2735 cancel_work_sync(&sc->state_worker);
2736 }
2737 }
2738
sony_input_configured(struct hid_device * hdev,struct hid_input * hidinput)2739 static int sony_input_configured(struct hid_device *hdev,
2740 struct hid_input *hidinput)
2741 {
2742 struct sony_sc *sc = hid_get_drvdata(hdev);
2743 int append_dev_id;
2744 int ret;
2745
2746 ret = sony_set_device_id(sc);
2747 if (ret < 0) {
2748 hid_err(hdev, "failed to allocate the device id\n");
2749 goto err_stop;
2750 }
2751
2752 ret = append_dev_id = sony_check_add(sc);
2753 if (ret < 0)
2754 goto err_stop;
2755
2756 ret = sony_allocate_output_report(sc);
2757 if (ret < 0) {
2758 hid_err(hdev, "failed to allocate the output report buffer\n");
2759 goto err_stop;
2760 }
2761
2762 if (sc->quirks & NAVIGATION_CONTROLLER_USB) {
2763 /*
2764 * The Sony Sixaxis does not handle HID Output Reports on the
2765 * Interrupt EP like it could, so we need to force HID Output
2766 * Reports to use HID_REQ_SET_REPORT on the Control EP.
2767 *
2768 * There is also another issue about HID Output Reports via USB,
2769 * the Sixaxis does not want the report_id as part of the data
2770 * packet, so we have to discard buf[0] when sending the actual
2771 * control message, even for numbered reports, humpf!
2772 *
2773 * Additionally, the Sixaxis on USB isn't properly initialized
2774 * until the PS logo button is pressed and as such won't retain
2775 * any state set by an output report, so the initial
2776 * configuration report is deferred until the first input
2777 * report arrives.
2778 */
2779 hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
2780 hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
2781 sc->defer_initialization = 1;
2782
2783 ret = sixaxis_set_operational_usb(hdev);
2784 if (ret < 0) {
2785 hid_err(hdev, "Failed to set controller into operational mode\n");
2786 goto err_stop;
2787 }
2788
2789 sony_init_output_report(sc, sixaxis_send_output_report);
2790 } else if (sc->quirks & NAVIGATION_CONTROLLER_BT) {
2791 /*
2792 * The Navigation controller wants output reports sent on the ctrl
2793 * endpoint when connected via Bluetooth.
2794 */
2795 hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
2796
2797 ret = sixaxis_set_operational_bt(hdev);
2798 if (ret < 0) {
2799 hid_err(hdev, "Failed to set controller into operational mode\n");
2800 goto err_stop;
2801 }
2802
2803 sony_init_output_report(sc, sixaxis_send_output_report);
2804 } else if (sc->quirks & SIXAXIS_CONTROLLER_USB) {
2805 /*
2806 * The Sony Sixaxis does not handle HID Output Reports on the
2807 * Interrupt EP and the device only becomes active when the
2808 * PS button is pressed. See comment for Navigation controller
2809 * above for more details.
2810 */
2811 hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
2812 hdev->quirks |= HID_QUIRK_SKIP_OUTPUT_REPORT_ID;
2813 sc->defer_initialization = 1;
2814
2815 ret = sixaxis_set_operational_usb(hdev);
2816 if (ret < 0) {
2817 hid_err(hdev, "Failed to set controller into operational mode\n");
2818 goto err_stop;
2819 }
2820
2821 ret = sony_register_sensors(sc);
2822 if (ret) {
2823 hid_err(sc->hdev,
2824 "Unable to initialize motion sensors: %d\n", ret);
2825 goto err_stop;
2826 }
2827
2828 sony_init_output_report(sc, sixaxis_send_output_report);
2829 } else if (sc->quirks & SIXAXIS_CONTROLLER_BT) {
2830 /*
2831 * The Sixaxis wants output reports sent on the ctrl endpoint
2832 * when connected via Bluetooth.
2833 */
2834 hdev->quirks |= HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP;
2835
2836 ret = sixaxis_set_operational_bt(hdev);
2837 if (ret < 0) {
2838 hid_err(hdev, "Failed to set controller into operational mode\n");
2839 goto err_stop;
2840 }
2841
2842 ret = sony_register_sensors(sc);
2843 if (ret) {
2844 hid_err(sc->hdev,
2845 "Unable to initialize motion sensors: %d\n", ret);
2846 goto err_stop;
2847 }
2848
2849 sony_init_output_report(sc, sixaxis_send_output_report);
2850 } else if (sc->quirks & DUALSHOCK4_CONTROLLER) {
2851 ret = dualshock4_get_calibration_data(sc);
2852 if (ret < 0) {
2853 hid_err(hdev, "Failed to get calibration data from Dualshock 4\n");
2854 goto err_stop;
2855 }
2856
2857 ret = dualshock4_get_version_info(sc);
2858 if (ret < 0) {
2859 hid_err(sc->hdev, "Failed to get version data from Dualshock 4\n");
2860 goto err_stop;
2861 }
2862
2863 ret = device_create_file(&sc->hdev->dev, &dev_attr_firmware_version);
2864 if (ret) {
2865 hid_err(sc->hdev, "can't create sysfs firmware_version attribute err: %d\n", ret);
2866 goto err_stop;
2867 }
2868 sc->fw_version_created = true;
2869
2870 ret = device_create_file(&sc->hdev->dev, &dev_attr_hardware_version);
2871 if (ret) {
2872 hid_err(sc->hdev, "can't create sysfs hardware_version attribute err: %d\n", ret);
2873 goto err_stop;
2874 }
2875 sc->hw_version_created = true;
2876
2877 /*
2878 * The Dualshock 4 touchpad supports 2 touches and has a
2879 * resolution of 1920x942 (44.86 dots/mm).
2880 */
2881 ret = sony_register_touchpad(sc, 2, 1920, 942, 0, 0, 0);
2882 if (ret) {
2883 hid_err(sc->hdev,
2884 "Unable to initialize multi-touch slots: %d\n",
2885 ret);
2886 goto err_stop;
2887 }
2888
2889 ret = sony_register_sensors(sc);
2890 if (ret) {
2891 hid_err(sc->hdev,
2892 "Unable to initialize motion sensors: %d\n", ret);
2893 goto err_stop;
2894 }
2895
2896 if (sc->quirks & DUALSHOCK4_CONTROLLER_BT) {
2897 sc->ds4_bt_poll_interval = DS4_BT_DEFAULT_POLL_INTERVAL_MS;
2898 ret = device_create_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
2899 if (ret)
2900 hid_warn(sc->hdev,
2901 "can't create sysfs bt_poll_interval attribute err: %d\n",
2902 ret);
2903 }
2904
2905 if (sc->quirks & DUALSHOCK4_DONGLE) {
2906 INIT_WORK(&sc->hotplug_worker, dualshock4_calibration_work);
2907 sc->hotplug_worker_initialized = 1;
2908 sc->ds4_dongle_state = DONGLE_DISCONNECTED;
2909 }
2910
2911 sony_init_output_report(sc, dualshock4_send_output_report);
2912 } else if (sc->quirks & NSG_MRXU_REMOTE) {
2913 /*
2914 * The NSG-MRxU touchpad supports 2 touches and has a
2915 * resolution of 1667x1868
2916 */
2917 ret = sony_register_touchpad(sc, 2,
2918 NSG_MRXU_MAX_X, NSG_MRXU_MAX_Y, 15, 15, 1);
2919 if (ret) {
2920 hid_err(sc->hdev,
2921 "Unable to initialize multi-touch slots: %d\n",
2922 ret);
2923 goto err_stop;
2924 }
2925
2926 } else if (sc->quirks & MOTION_CONTROLLER) {
2927 sony_init_output_report(sc, motion_send_output_report);
2928 } else {
2929 ret = 0;
2930 }
2931
2932 if (sc->quirks & SONY_LED_SUPPORT) {
2933 ret = sony_leds_init(sc);
2934 if (ret < 0)
2935 goto err_stop;
2936 }
2937
2938 if (sc->quirks & SONY_BATTERY_SUPPORT) {
2939 ret = sony_battery_probe(sc, append_dev_id);
2940 if (ret < 0)
2941 goto err_stop;
2942
2943 /* Open the device to receive reports with battery info */
2944 ret = hid_hw_open(hdev);
2945 if (ret < 0) {
2946 hid_err(hdev, "hw open failed\n");
2947 goto err_stop;
2948 }
2949 }
2950
2951 if (sc->quirks & SONY_FF_SUPPORT) {
2952 ret = sony_init_ff(sc);
2953 if (ret < 0)
2954 goto err_close;
2955 }
2956
2957 return 0;
2958 err_close:
2959 hid_hw_close(hdev);
2960 err_stop:
2961 /* Piggy back on the default ds4_bt_ poll_interval to determine
2962 * if we need to remove the file as we don't know for sure if we
2963 * executed that logic.
2964 */
2965 if (sc->ds4_bt_poll_interval)
2966 device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
2967 if (sc->fw_version_created)
2968 device_remove_file(&sc->hdev->dev, &dev_attr_firmware_version);
2969 if (sc->hw_version_created)
2970 device_remove_file(&sc->hdev->dev, &dev_attr_hardware_version);
2971 sony_cancel_work_sync(sc);
2972 sony_remove_dev_list(sc);
2973 sony_release_device_id(sc);
2974 return ret;
2975 }
2976
sony_probe(struct hid_device * hdev,const struct hid_device_id * id)2977 static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
2978 {
2979 int ret;
2980 unsigned long quirks = id->driver_data;
2981 struct sony_sc *sc;
2982 struct usb_device *usbdev;
2983 unsigned int connect_mask = HID_CONNECT_DEFAULT;
2984
2985 if (!strcmp(hdev->name, "FutureMax Dance Mat"))
2986 quirks |= FUTUREMAX_DANCE_MAT;
2987
2988 if (!strcmp(hdev->name, "SHANWAN PS3 GamePad") ||
2989 !strcmp(hdev->name, "ShanWan PS(R) Ga`epad"))
2990 quirks |= SHANWAN_GAMEPAD;
2991
2992 sc = devm_kzalloc(&hdev->dev, sizeof(*sc), GFP_KERNEL);
2993 if (sc == NULL) {
2994 hid_err(hdev, "can't alloc sony descriptor\n");
2995 return -ENOMEM;
2996 }
2997
2998 spin_lock_init(&sc->lock);
2999
3000 sc->quirks = quirks;
3001 hid_set_drvdata(hdev, sc);
3002 sc->hdev = hdev;
3003
3004 ret = hid_parse(hdev);
3005 if (ret) {
3006 hid_err(hdev, "parse failed\n");
3007 return ret;
3008 }
3009
3010 if (sc->quirks & VAIO_RDESC_CONSTANT)
3011 connect_mask |= HID_CONNECT_HIDDEV_FORCE;
3012 else if (sc->quirks & SIXAXIS_CONTROLLER)
3013 connect_mask |= HID_CONNECT_HIDDEV_FORCE;
3014
3015 /* Patch the hw version on DS3/4 compatible devices, so applications can
3016 * distinguish between the default HID mappings and the mappings defined
3017 * by the Linux game controller spec. This is important for the SDL2
3018 * library, which has a game controller database, which uses device ids
3019 * in combination with version as a key.
3020 */
3021 if (sc->quirks & (SIXAXIS_CONTROLLER | DUALSHOCK4_CONTROLLER))
3022 hdev->version |= 0x8000;
3023
3024 ret = hid_hw_start(hdev, connect_mask);
3025 if (ret) {
3026 hid_err(hdev, "hw start failed\n");
3027 return ret;
3028 }
3029
3030 /* sony_input_configured can fail, but this doesn't result
3031 * in hid_hw_start failures (intended). Check whether
3032 * the HID layer claimed the device else fail.
3033 * We don't know the actual reason for the failure, most
3034 * likely it is due to EEXIST in case of double connection
3035 * of USB and Bluetooth, but could have been due to ENOMEM
3036 * or other reasons as well.
3037 */
3038 if (!(hdev->claimed & HID_CLAIMED_INPUT)) {
3039 hid_err(hdev, "failed to claim input\n");
3040 ret = -ENODEV;
3041 goto err;
3042 }
3043
3044 if (sc->quirks & (GHL_GUITAR_PS3WIIU | GHL_GUITAR_PS4)) {
3045 if (!hid_is_usb(hdev)) {
3046 ret = -EINVAL;
3047 goto err;
3048 }
3049
3050 usbdev = to_usb_device(sc->hdev->dev.parent->parent);
3051
3052 sc->ghl_urb = usb_alloc_urb(0, GFP_ATOMIC);
3053 if (!sc->ghl_urb) {
3054 ret = -ENOMEM;
3055 goto err;
3056 }
3057
3058 if (sc->quirks & GHL_GUITAR_PS3WIIU)
3059 ret = ghl_init_urb(sc, usbdev, ghl_ps3wiiu_magic_data,
3060 ARRAY_SIZE(ghl_ps3wiiu_magic_data));
3061 else if (sc->quirks & GHL_GUITAR_PS4)
3062 ret = ghl_init_urb(sc, usbdev, ghl_ps4_magic_data,
3063 ARRAY_SIZE(ghl_ps4_magic_data));
3064 if (ret) {
3065 hid_err(hdev, "error preparing URB\n");
3066 goto err;
3067 }
3068
3069 timer_setup(&sc->ghl_poke_timer, ghl_magic_poke, 0);
3070 mod_timer(&sc->ghl_poke_timer,
3071 jiffies + GHL_GUITAR_POKE_INTERVAL*HZ);
3072 }
3073
3074 return ret;
3075
3076 err:
3077 hid_hw_stop(hdev);
3078 return ret;
3079 }
3080
sony_remove(struct hid_device * hdev)3081 static void sony_remove(struct hid_device *hdev)
3082 {
3083 struct sony_sc *sc = hid_get_drvdata(hdev);
3084
3085 if (sc->quirks & (GHL_GUITAR_PS3WIIU | GHL_GUITAR_PS4)) {
3086 del_timer_sync(&sc->ghl_poke_timer);
3087 usb_free_urb(sc->ghl_urb);
3088 }
3089
3090 hid_hw_close(hdev);
3091
3092 if (sc->quirks & DUALSHOCK4_CONTROLLER_BT)
3093 device_remove_file(&sc->hdev->dev, &dev_attr_bt_poll_interval);
3094
3095 if (sc->fw_version_created)
3096 device_remove_file(&sc->hdev->dev, &dev_attr_firmware_version);
3097
3098 if (sc->hw_version_created)
3099 device_remove_file(&sc->hdev->dev, &dev_attr_hardware_version);
3100
3101 sony_cancel_work_sync(sc);
3102
3103 sony_remove_dev_list(sc);
3104
3105 sony_release_device_id(sc);
3106
3107 hid_hw_stop(hdev);
3108 }
3109
3110 #ifdef CONFIG_PM
3111
sony_suspend(struct hid_device * hdev,pm_message_t message)3112 static int sony_suspend(struct hid_device *hdev, pm_message_t message)
3113 {
3114 #ifdef CONFIG_SONY_FF
3115
3116 /* On suspend stop any running force-feedback events */
3117 if (SONY_FF_SUPPORT) {
3118 struct sony_sc *sc = hid_get_drvdata(hdev);
3119
3120 sc->left = sc->right = 0;
3121 sony_send_output_report(sc);
3122 }
3123
3124 #endif
3125 return 0;
3126 }
3127
sony_resume(struct hid_device * hdev)3128 static int sony_resume(struct hid_device *hdev)
3129 {
3130 struct sony_sc *sc = hid_get_drvdata(hdev);
3131
3132 /*
3133 * The Sixaxis and navigation controllers on USB need to be
3134 * reinitialized on resume or they won't behave properly.
3135 */
3136 if ((sc->quirks & SIXAXIS_CONTROLLER_USB) ||
3137 (sc->quirks & NAVIGATION_CONTROLLER_USB)) {
3138 sixaxis_set_operational_usb(sc->hdev);
3139 sc->defer_initialization = 1;
3140 }
3141
3142 return 0;
3143 }
3144
3145 #endif
3146
3147 static const struct hid_device_id sony_devices[] = {
3148 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
3149 .driver_data = SIXAXIS_CONTROLLER_USB },
3150 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER),
3151 .driver_data = NAVIGATION_CONTROLLER_USB },
3152 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER),
3153 .driver_data = NAVIGATION_CONTROLLER_BT },
3154 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_MOTION_CONTROLLER),
3155 .driver_data = MOTION_CONTROLLER_USB },
3156 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_MOTION_CONTROLLER),
3157 .driver_data = MOTION_CONTROLLER_BT },
3158 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER),
3159 .driver_data = SIXAXIS_CONTROLLER_BT },
3160 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE),
3161 .driver_data = VAIO_RDESC_CONSTANT },
3162 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE),
3163 .driver_data = VAIO_RDESC_CONSTANT },
3164 /*
3165 * Wired Buzz Controller. Reported as Sony Hub from its USB ID and as
3166 * Logitech joystick from the device descriptor.
3167 */
3168 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER),
3169 .driver_data = BUZZ_CONTROLLER },
3170 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER),
3171 .driver_data = BUZZ_CONTROLLER },
3172 /* PS3 BD Remote Control */
3173 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE),
3174 .driver_data = PS3REMOTE },
3175 /* Logitech Harmony Adapter for PS3 */
3176 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3),
3177 .driver_data = PS3REMOTE },
3178 /* SMK-Link PS3 BD Remote Control */
3179 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_PS3_BDREMOTE),
3180 .driver_data = PS3REMOTE },
3181 /* Sony Dualshock 4 controllers for PS4 */
3182 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
3183 .driver_data = DUALSHOCK4_CONTROLLER_USB },
3184 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER),
3185 .driver_data = DUALSHOCK4_CONTROLLER_BT },
3186 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2),
3187 .driver_data = DUALSHOCK4_CONTROLLER_USB },
3188 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2),
3189 .driver_data = DUALSHOCK4_CONTROLLER_BT },
3190 { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE),
3191 .driver_data = DUALSHOCK4_DONGLE },
3192 /* Nyko Core Controller for PS3 */
3193 { HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER),
3194 .driver_data = SIXAXIS_CONTROLLER_USB | SINO_LITE_CONTROLLER },
3195 /* SMK-Link NSG-MR5U Remote Control */
3196 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE),
3197 .driver_data = NSG_MR5U_REMOTE_BT },
3198 /* SMK-Link NSG-MR7U Remote Control */
3199 { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE),
3200 .driver_data = NSG_MR7U_REMOTE_BT },
3201 /* Guitar Hero Live PS3 and Wii U guitar dongles */
3202 { HID_USB_DEVICE(USB_VENDOR_ID_SONY_RHYTHM, USB_DEVICE_ID_SONY_PS3WIIU_GHLIVE_DONGLE),
3203 .driver_data = GHL_GUITAR_PS3WIIU | GH_GUITAR_CONTROLLER },
3204 /* Guitar Hero PC Guitar Dongle */
3205 { HID_USB_DEVICE(USB_VENDOR_ID_REDOCTANE, USB_DEVICE_ID_REDOCTANE_GUITAR_DONGLE),
3206 .driver_data = GH_GUITAR_CONTROLLER },
3207 /* Guitar Hero PS3 World Tour Guitar Dongle */
3208 { HID_USB_DEVICE(USB_VENDOR_ID_SONY_RHYTHM, USB_DEVICE_ID_SONY_PS3_GUITAR_DONGLE),
3209 .driver_data = GH_GUITAR_CONTROLLER },
3210 /* Guitar Hero Live PS4 guitar dongles */
3211 { HID_USB_DEVICE(USB_VENDOR_ID_REDOCTANE, USB_DEVICE_ID_REDOCTANE_PS4_GHLIVE_DONGLE),
3212 .driver_data = GHL_GUITAR_PS4 | GH_GUITAR_CONTROLLER },
3213 { }
3214 };
3215 MODULE_DEVICE_TABLE(hid, sony_devices);
3216
3217 static struct hid_driver sony_driver = {
3218 .name = "sony",
3219 .id_table = sony_devices,
3220 .input_mapping = sony_mapping,
3221 .input_configured = sony_input_configured,
3222 .probe = sony_probe,
3223 .remove = sony_remove,
3224 .report_fixup = sony_report_fixup,
3225 .raw_event = sony_raw_event,
3226
3227 #ifdef CONFIG_PM
3228 .suspend = sony_suspend,
3229 .resume = sony_resume,
3230 .reset_resume = sony_resume,
3231 #endif
3232 };
3233
sony_init(void)3234 static int __init sony_init(void)
3235 {
3236 dbg_hid("Sony:%s\n", __func__);
3237
3238 return hid_register_driver(&sony_driver);
3239 }
3240
sony_exit(void)3241 static void __exit sony_exit(void)
3242 {
3243 dbg_hid("Sony:%s\n", __func__);
3244
3245 hid_unregister_driver(&sony_driver);
3246 ida_destroy(&sony_device_id_allocator);
3247 }
3248 module_init(sony_init);
3249 module_exit(sony_exit);
3250
3251 MODULE_LICENSE("GPL");
3252