1/* SPDX-License-Identifier: GPL-2.0 */
2/* arch/sparc/kernel/entry.S:  Sparc trap low-level entry points.
3 *
4 * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
5 * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
6 * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
7 * Copyright (C) 1996-1999 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
8 * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
9 */
10
11#include <linux/linkage.h>
12#include <linux/errno.h>
13#include <linux/pgtable.h>
14
15#include <asm/head.h>
16#include <asm/asi.h>
17#include <asm/smp.h>
18#include <asm/contregs.h>
19#include <asm/ptrace.h>
20#include <asm/asm-offsets.h>
21#include <asm/psr.h>
22#include <asm/vaddrs.h>
23#include <asm/page.h>
24#include <asm/winmacro.h>
25#include <asm/signal.h>
26#include <asm/obio.h>
27#include <asm/mxcc.h>
28#include <asm/thread_info.h>
29#include <asm/param.h>
30#include <asm/unistd.h>
31
32#include <asm/asmmacro.h>
33#include <asm/export.h>
34
35#define curptr      g6
36
37/* These are just handy. */
38#define _SV	save	%sp, -STACKFRAME_SZ, %sp
39#define _RS     restore
40
41#define FLUSH_ALL_KERNEL_WINDOWS \
42	_SV; _SV; _SV; _SV; _SV; _SV; _SV; \
43	_RS; _RS; _RS; _RS; _RS; _RS; _RS;
44
45	.text
46
47#ifdef CONFIG_KGDB
48	.align	4
49	.globl		arch_kgdb_breakpoint
50	.type		arch_kgdb_breakpoint,#function
51arch_kgdb_breakpoint:
52	ta		0x7d
53	retl
54	 nop
55	.size		arch_kgdb_breakpoint,.-arch_kgdb_breakpoint
56#endif
57
58#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
59	.align	4
60	.globl	floppy_hardint
61floppy_hardint:
62	/*
63	 * This code cannot touch registers %l0 %l1 and %l2
64	 * because SAVE_ALL depends on their values. It depends
65	 * on %l3 also, but we regenerate it before a call.
66	 * Other registers are:
67	 * %l3 -- base address of fdc registers
68	 * %l4 -- pdma_vaddr
69	 * %l5 -- scratch for ld/st address
70	 * %l6 -- pdma_size
71	 * %l7 -- scratch [floppy byte, ld/st address, aux. data]
72	 */
73
74	/* Do we have work to do? */
75	sethi	%hi(doing_pdma), %l7
76	ld	[%l7 + %lo(doing_pdma)], %l7
77	cmp	%l7, 0
78	be	floppy_dosoftint
79	 nop
80
81	/* Load fdc register base */
82	sethi	%hi(fdc_status), %l3
83	ld	[%l3 + %lo(fdc_status)], %l3
84
85	/* Setup register addresses */
86	sethi	%hi(pdma_vaddr), %l5	! transfer buffer
87	ld	[%l5 + %lo(pdma_vaddr)], %l4
88	sethi	%hi(pdma_size), %l5	! bytes to go
89	ld	[%l5 + %lo(pdma_size)], %l6
90next_byte:
91  	ldub	[%l3], %l7
92
93	andcc	%l7, 0x80, %g0		! Does fifo still have data
94	bz	floppy_fifo_emptied	! fifo has been emptied...
95	 andcc	%l7, 0x20, %g0		! in non-dma mode still?
96	bz	floppy_overrun		! nope, overrun
97	 andcc	%l7, 0x40, %g0		! 0=write 1=read
98	bz	floppy_write
99	 sub	%l6, 0x1, %l6
100
101	/* Ok, actually read this byte */
102	ldub	[%l3 + 1], %l7
103	orcc	%g0, %l6, %g0
104	stb	%l7, [%l4]
105	bne	next_byte
106	 add	%l4, 0x1, %l4
107
108	b	floppy_tdone
109	 nop
110
111floppy_write:
112	/* Ok, actually write this byte */
113	ldub	[%l4], %l7
114	orcc	%g0, %l6, %g0
115	stb	%l7, [%l3 + 1]
116	bne	next_byte
117	 add	%l4, 0x1, %l4
118
119	/* fall through... */
120floppy_tdone:
121	sethi	%hi(pdma_vaddr), %l5
122	st	%l4, [%l5 + %lo(pdma_vaddr)]
123	sethi	%hi(pdma_size), %l5
124	st	%l6, [%l5 + %lo(pdma_size)]
125	/* Flip terminal count pin */
126	set	auxio_register, %l7
127	ld	[%l7], %l7
128
129	ldub	[%l7], %l5
130
131	or	%l5, 0xc2, %l5
132	stb	%l5, [%l7]
133	andn    %l5, 0x02, %l5
134
1352:
136	/* Kill some time so the bits set */
137	WRITE_PAUSE
138	WRITE_PAUSE
139
140	stb     %l5, [%l7]
141
142	/* Prevent recursion */
143	sethi	%hi(doing_pdma), %l7
144	b	floppy_dosoftint
145	 st	%g0, [%l7 + %lo(doing_pdma)]
146
147	/* We emptied the FIFO, but we haven't read everything
148	 * as of yet.  Store the current transfer address and
149	 * bytes left to read so we can continue when the next
150	 * fast IRQ comes in.
151	 */
152floppy_fifo_emptied:
153	sethi	%hi(pdma_vaddr), %l5
154	st	%l4, [%l5 + %lo(pdma_vaddr)]
155	sethi	%hi(pdma_size), %l7
156	st	%l6, [%l7 + %lo(pdma_size)]
157
158	/* Restore condition codes */
159	wr	%l0, 0x0, %psr
160	WRITE_PAUSE
161
162	jmp	%l1
163	rett	%l2
164
165floppy_overrun:
166	sethi	%hi(pdma_vaddr), %l5
167	st	%l4, [%l5 + %lo(pdma_vaddr)]
168	sethi	%hi(pdma_size), %l5
169	st	%l6, [%l5 + %lo(pdma_size)]
170	/* Prevent recursion */
171	sethi	%hi(doing_pdma), %l7
172	st	%g0, [%l7 + %lo(doing_pdma)]
173
174	/* fall through... */
175floppy_dosoftint:
176	rd	%wim, %l3
177	SAVE_ALL
178
179	/* Set all IRQs off. */
180	or	%l0, PSR_PIL, %l4
181	wr	%l4, 0x0, %psr
182	WRITE_PAUSE
183	wr	%l4, PSR_ET, %psr
184	WRITE_PAUSE
185
186	mov	11, %o0			! floppy irq level (unused anyway)
187	mov	%g0, %o1		! devid is not used in fast interrupts
188	call	sparc_floppy_irq
189	 add	%sp, STACKFRAME_SZ, %o2	! struct pt_regs *regs
190
191	RESTORE_ALL
192
193#endif /* (CONFIG_BLK_DEV_FD) */
194
195	/* Bad trap handler */
196	.globl	bad_trap_handler
197bad_trap_handler:
198	SAVE_ALL
199
200	wr	%l0, PSR_ET, %psr
201	WRITE_PAUSE
202
203	add	%sp, STACKFRAME_SZ, %o0	! pt_regs
204	call	do_hw_interrupt
205	 mov	%l7, %o1		! trap number
206
207	RESTORE_ALL
208
209/* For now all IRQ's not registered get sent here. handler_irq() will
210 * see if a routine is registered to handle this interrupt and if not
211 * it will say so on the console.
212 */
213
214	.align	4
215	.globl	real_irq_entry, patch_handler_irq
216real_irq_entry:
217	SAVE_ALL
218
219#ifdef CONFIG_SMP
220	.globl	patchme_maybe_smp_msg
221
222	cmp	%l7, 11
223patchme_maybe_smp_msg:
224	bgu	maybe_smp4m_msg
225	 nop
226#endif
227
228real_irq_continue:
229	or	%l0, PSR_PIL, %g2
230	wr	%g2, 0x0, %psr
231	WRITE_PAUSE
232	wr	%g2, PSR_ET, %psr
233	WRITE_PAUSE
234	mov	%l7, %o0		! irq level
235patch_handler_irq:
236	call	handler_irq
237	 add	%sp, STACKFRAME_SZ, %o1	! pt_regs ptr
238	or	%l0, PSR_PIL, %g2	! restore PIL after handler_irq
239	wr	%g2, PSR_ET, %psr	! keep ET up
240	WRITE_PAUSE
241
242	RESTORE_ALL
243
244#ifdef CONFIG_SMP
245	/* SMP per-cpu ticker interrupts are handled specially. */
246smp4m_ticker:
247	bne	real_irq_continue+4
248	 or	%l0, PSR_PIL, %g2
249	wr	%g2, 0x0, %psr
250	WRITE_PAUSE
251	wr	%g2, PSR_ET, %psr
252	WRITE_PAUSE
253	call	smp4m_percpu_timer_interrupt
254	 add	%sp, STACKFRAME_SZ, %o0
255	wr	%l0, PSR_ET, %psr
256	WRITE_PAUSE
257	RESTORE_ALL
258
259#define GET_PROCESSOR4M_ID(reg)	\
260	rd	%tbr, %reg;	\
261	srl	%reg, 12, %reg;	\
262	and	%reg, 3, %reg;
263
264	/* Here is where we check for possible SMP IPI passed to us
265	 * on some level other than 15 which is the NMI and only used
266	 * for cross calls.  That has a separate entry point below.
267	 *
268	 * IPIs are sent on Level 12, 13 and 14. See IRQ_IPI_*.
269	 */
270maybe_smp4m_msg:
271	GET_PROCESSOR4M_ID(o3)
272	sethi	%hi(sun4m_irq_percpu), %l5
273	sll	%o3, 2, %o3
274	or	%l5, %lo(sun4m_irq_percpu), %o5
275	sethi	%hi(0x70000000), %o2	! Check all soft-IRQs
276	ld	[%o5 + %o3], %o1
277	ld	[%o1 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
278	andcc	%o3, %o2, %g0
279	be,a	smp4m_ticker
280	 cmp	%l7, 14
281	/* Soft-IRQ IPI */
282	st	%o2, [%o1 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x70000000
283	WRITE_PAUSE
284	ld	[%o1 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
285	WRITE_PAUSE
286	or	%l0, PSR_PIL, %l4
287	wr	%l4, 0x0, %psr
288	WRITE_PAUSE
289	wr	%l4, PSR_ET, %psr
290	WRITE_PAUSE
291	srl	%o3, 28, %o2		! shift for simpler checks below
292maybe_smp4m_msg_check_single:
293	andcc	%o2, 0x1, %g0
294	beq,a	maybe_smp4m_msg_check_mask
295	 andcc	%o2, 0x2, %g0
296	call	smp_call_function_single_interrupt
297	 nop
298	andcc	%o2, 0x2, %g0
299maybe_smp4m_msg_check_mask:
300	beq,a	maybe_smp4m_msg_check_resched
301	 andcc	%o2, 0x4, %g0
302	call	smp_call_function_interrupt
303	 nop
304	andcc	%o2, 0x4, %g0
305maybe_smp4m_msg_check_resched:
306	/* rescheduling is done in RESTORE_ALL regardless, but incr stats */
307	beq,a	maybe_smp4m_msg_out
308	 nop
309	call	smp_resched_interrupt
310	 nop
311maybe_smp4m_msg_out:
312	RESTORE_ALL
313
314	.align	4
315	.globl	linux_trap_ipi15_sun4m
316linux_trap_ipi15_sun4m:
317	SAVE_ALL
318	sethi	%hi(0x80000000), %o2
319	GET_PROCESSOR4M_ID(o0)
320	sethi	%hi(sun4m_irq_percpu), %l5
321	or	%l5, %lo(sun4m_irq_percpu), %o5
322	sll	%o0, 2, %o0
323	ld	[%o5 + %o0], %o5
324	ld	[%o5 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
325	andcc	%o3, %o2, %g0
326	be	sun4m_nmi_error		! Must be an NMI async memory error
327	 st	%o2, [%o5 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x80000000
328	WRITE_PAUSE
329	ld	[%o5 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
330	WRITE_PAUSE
331	or	%l0, PSR_PIL, %l4
332	wr	%l4, 0x0, %psr
333	WRITE_PAUSE
334	wr	%l4, PSR_ET, %psr
335	WRITE_PAUSE
336	call	smp4m_cross_call_irq
337	 nop
338	b	ret_trap_lockless_ipi
339	 clr	%l6
340
341	.globl	smp4d_ticker
342	/* SMP per-cpu ticker interrupts are handled specially. */
343smp4d_ticker:
344	SAVE_ALL
345	or	%l0, PSR_PIL, %g2
346	sethi	%hi(CC_ICLR), %o0
347	sethi	%hi(1 << 14), %o1
348	or	%o0, %lo(CC_ICLR), %o0
349	stha	%o1, [%o0] ASI_M_MXCC	/* Clear PIL 14 in MXCC's ICLR */
350	wr	%g2, 0x0, %psr
351	WRITE_PAUSE
352	wr	%g2, PSR_ET, %psr
353	WRITE_PAUSE
354	call	smp4d_percpu_timer_interrupt
355	 add	%sp, STACKFRAME_SZ, %o0
356	wr	%l0, PSR_ET, %psr
357	WRITE_PAUSE
358	RESTORE_ALL
359
360	.align	4
361	.globl	linux_trap_ipi15_sun4d
362linux_trap_ipi15_sun4d:
363	SAVE_ALL
364	sethi	%hi(CC_BASE), %o4
365	sethi	%hi(MXCC_ERR_ME|MXCC_ERR_PEW|MXCC_ERR_ASE|MXCC_ERR_PEE), %o2
366	or	%o4, (CC_EREG - CC_BASE), %o0
367	ldda	[%o0] ASI_M_MXCC, %o0
368	andcc	%o0, %o2, %g0
369	bne	1f
370	 sethi	%hi(BB_STAT2), %o2
371	lduba	[%o2] ASI_M_CTL, %o2
372	andcc	%o2, BB_STAT2_MASK, %g0
373	bne	2f
374	 or	%o4, (CC_ICLR - CC_BASE), %o0
375	sethi	%hi(1 << 15), %o1
376	stha	%o1, [%o0] ASI_M_MXCC	/* Clear PIL 15 in MXCC's ICLR */
377	or	%l0, PSR_PIL, %l4
378	wr	%l4, 0x0, %psr
379	WRITE_PAUSE
380	wr	%l4, PSR_ET, %psr
381	WRITE_PAUSE
382	call	smp4d_cross_call_irq
383	 nop
384	b	ret_trap_lockless_ipi
385	 clr	%l6
386
3871:	/* MXCC error */
3882:	/* BB error */
389	/* Disable PIL 15 */
390	set	CC_IMSK, %l4
391	lduha	[%l4] ASI_M_MXCC, %l5
392	sethi	%hi(1 << 15), %l7
393	or	%l5, %l7, %l5
394	stha	%l5, [%l4] ASI_M_MXCC
395	/* FIXME */
3961:	b,a	1b
397
398	.globl	smpleon_ipi
399	.extern leon_ipi_interrupt
400	/* SMP per-cpu IPI interrupts are handled specially. */
401smpleon_ipi:
402        SAVE_ALL
403	or	%l0, PSR_PIL, %g2
404	wr	%g2, 0x0, %psr
405	WRITE_PAUSE
406	wr	%g2, PSR_ET, %psr
407	WRITE_PAUSE
408	call	leonsmp_ipi_interrupt
409	 add	%sp, STACKFRAME_SZ, %o1 ! pt_regs
410	wr	%l0, PSR_ET, %psr
411	WRITE_PAUSE
412	RESTORE_ALL
413
414	.align	4
415	.globl	linux_trap_ipi15_leon
416linux_trap_ipi15_leon:
417	SAVE_ALL
418	or	%l0, PSR_PIL, %l4
419	wr	%l4, 0x0, %psr
420	WRITE_PAUSE
421	wr	%l4, PSR_ET, %psr
422	WRITE_PAUSE
423	call	leon_cross_call_irq
424	 nop
425	b	ret_trap_lockless_ipi
426	 clr	%l6
427
428#endif /* CONFIG_SMP */
429
430	/* This routine handles illegal instructions and privileged
431	 * instruction attempts from user code.
432	 */
433	.align	4
434	.globl	bad_instruction
435bad_instruction:
436	sethi	%hi(0xc1f80000), %l4
437	ld	[%l1], %l5
438	sethi	%hi(0x81d80000), %l7
439	and	%l5, %l4, %l5
440	cmp	%l5, %l7
441	be	1f
442	SAVE_ALL
443
444	wr	%l0, PSR_ET, %psr		! re-enable traps
445	WRITE_PAUSE
446
447	add	%sp, STACKFRAME_SZ, %o0
448	mov	%l1, %o1
449	mov	%l2, %o2
450	call	do_illegal_instruction
451	 mov	%l0, %o3
452
453	RESTORE_ALL
454
4551:	/* unimplemented flush - just skip */
456	jmpl	%l2, %g0
457	 rett	%l2 + 4
458
459	.align	4
460	.globl	priv_instruction
461priv_instruction:
462	SAVE_ALL
463
464	wr	%l0, PSR_ET, %psr
465	WRITE_PAUSE
466
467	add	%sp, STACKFRAME_SZ, %o0
468	mov	%l1, %o1
469	mov	%l2, %o2
470	call	do_priv_instruction
471	 mov	%l0, %o3
472
473	RESTORE_ALL
474
475	/* This routine handles unaligned data accesses. */
476	.align	4
477	.globl	mna_handler
478mna_handler:
479	andcc	%l0, PSR_PS, %g0
480	be	mna_fromuser
481	 nop
482
483	SAVE_ALL
484
485	wr	%l0, PSR_ET, %psr
486	WRITE_PAUSE
487
488	ld	[%l1], %o1
489	call	kernel_unaligned_trap
490	 add	%sp, STACKFRAME_SZ, %o0
491
492	RESTORE_ALL
493
494mna_fromuser:
495	SAVE_ALL
496
497	wr	%l0, PSR_ET, %psr		! re-enable traps
498	WRITE_PAUSE
499
500	ld	[%l1], %o1
501	call	user_unaligned_trap
502	 add	%sp, STACKFRAME_SZ, %o0
503
504	RESTORE_ALL
505
506	/* This routine handles floating point disabled traps. */
507	.align	4
508	.globl	fpd_trap_handler
509fpd_trap_handler:
510	SAVE_ALL
511
512	wr	%l0, PSR_ET, %psr		! re-enable traps
513	WRITE_PAUSE
514
515	add	%sp, STACKFRAME_SZ, %o0
516	mov	%l1, %o1
517	mov	%l2, %o2
518	call	do_fpd_trap
519	 mov	%l0, %o3
520
521	RESTORE_ALL
522
523	/* This routine handles Floating Point Exceptions. */
524	.align	4
525	.globl	fpe_trap_handler
526fpe_trap_handler:
527	set	fpsave_magic, %l5
528	cmp	%l1, %l5
529	be	1f
530	 sethi	%hi(fpsave), %l5
531	or	%l5, %lo(fpsave), %l5
532	cmp	%l1, %l5
533	bne	2f
534	 sethi	%hi(fpsave_catch2), %l5
535	or	%l5, %lo(fpsave_catch2), %l5
536	wr	%l0, 0x0, %psr
537	WRITE_PAUSE
538	jmp	%l5
539	 rett	%l5 + 4
5401:
541	sethi	%hi(fpsave_catch), %l5
542	or	%l5, %lo(fpsave_catch), %l5
543	wr	%l0, 0x0, %psr
544	WRITE_PAUSE
545	jmp	%l5
546	 rett	%l5 + 4
547
5482:
549	SAVE_ALL
550
551	wr	%l0, PSR_ET, %psr		! re-enable traps
552	WRITE_PAUSE
553
554	add	%sp, STACKFRAME_SZ, %o0
555	mov	%l1, %o1
556	mov	%l2, %o2
557	call	do_fpe_trap
558	 mov	%l0, %o3
559
560	RESTORE_ALL
561
562	/* This routine handles Tag Overflow Exceptions. */
563	.align	4
564	.globl	do_tag_overflow
565do_tag_overflow:
566	SAVE_ALL
567
568	wr	%l0, PSR_ET, %psr		! re-enable traps
569	WRITE_PAUSE
570
571	add	%sp, STACKFRAME_SZ, %o0
572	mov	%l1, %o1
573	mov	%l2, %o2
574	call	handle_tag_overflow
575	 mov	%l0, %o3
576
577	RESTORE_ALL
578
579	/* This routine handles Watchpoint Exceptions. */
580	.align	4
581	.globl	do_watchpoint
582do_watchpoint:
583	SAVE_ALL
584
585	wr	%l0, PSR_ET, %psr		! re-enable traps
586	WRITE_PAUSE
587
588	add	%sp, STACKFRAME_SZ, %o0
589	mov	%l1, %o1
590	mov	%l2, %o2
591	call	handle_watchpoint
592	 mov	%l0, %o3
593
594	RESTORE_ALL
595
596	/* This routine handles Register Access Exceptions. */
597	.align	4
598	.globl	do_reg_access
599do_reg_access:
600	SAVE_ALL
601
602	wr	%l0, PSR_ET, %psr		! re-enable traps
603	WRITE_PAUSE
604
605	add	%sp, STACKFRAME_SZ, %o0
606	mov	%l1, %o1
607	mov	%l2, %o2
608	call	handle_reg_access
609	 mov	%l0, %o3
610
611	RESTORE_ALL
612
613	/* This routine handles Co-Processor Disabled Exceptions. */
614	.align	4
615	.globl	do_cp_disabled
616do_cp_disabled:
617	SAVE_ALL
618
619	wr	%l0, PSR_ET, %psr		! re-enable traps
620	WRITE_PAUSE
621
622	add	%sp, STACKFRAME_SZ, %o0
623	mov	%l1, %o1
624	mov	%l2, %o2
625	call	handle_cp_disabled
626	 mov	%l0, %o3
627
628	RESTORE_ALL
629
630	/* This routine handles Co-Processor Exceptions. */
631	.align	4
632	.globl	do_cp_exception
633do_cp_exception:
634	SAVE_ALL
635
636	wr	%l0, PSR_ET, %psr		! re-enable traps
637	WRITE_PAUSE
638
639	add	%sp, STACKFRAME_SZ, %o0
640	mov	%l1, %o1
641	mov	%l2, %o2
642	call	handle_cp_exception
643	 mov	%l0, %o3
644
645	RESTORE_ALL
646
647	/* This routine handles Hardware Divide By Zero Exceptions. */
648	.align	4
649	.globl	do_hw_divzero
650do_hw_divzero:
651	SAVE_ALL
652
653	wr	%l0, PSR_ET, %psr		! re-enable traps
654	WRITE_PAUSE
655
656	add	%sp, STACKFRAME_SZ, %o0
657	mov	%l1, %o1
658	mov	%l2, %o2
659	call	handle_hw_divzero
660	 mov	%l0, %o3
661
662	RESTORE_ALL
663
664	.align	4
665	.globl	do_flush_windows
666do_flush_windows:
667	SAVE_ALL
668
669	wr	%l0, PSR_ET, %psr
670	WRITE_PAUSE
671
672	andcc	%l0, PSR_PS, %g0
673	bne	dfw_kernel
674	 nop
675
676	call	flush_user_windows
677	 nop
678
679	/* Advance over the trap instruction. */
680	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1
681	add	%l1, 0x4, %l2
682	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
683	st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
684
685	RESTORE_ALL
686
687	.globl	flush_patch_one
688
689	/* We get these for debugging routines using __builtin_return_address() */
690dfw_kernel:
691flush_patch_one:
692	FLUSH_ALL_KERNEL_WINDOWS
693
694	/* Advance over the trap instruction. */
695	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1
696	add	%l1, 0x4, %l2
697	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
698	st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
699
700	RESTORE_ALL
701
702	/* The getcc software trap.  The user wants the condition codes from
703	 * the %psr in register %g1.
704	 */
705
706	.align	4
707	.globl	getcc_trap_handler
708getcc_trap_handler:
709	srl	%l0, 20, %g1	! give user
710	and	%g1, 0xf, %g1	! only ICC bits in %psr
711	jmp	%l2		! advance over trap instruction
712	rett	%l2 + 0x4	! like this...
713
714	/* The setcc software trap.  The user has condition codes in %g1
715	 * that it would like placed in the %psr.  Be careful not to flip
716	 * any unintentional bits!
717	 */
718
719	.align	4
720	.globl	setcc_trap_handler
721setcc_trap_handler:
722	sll	%g1, 0x14, %l4
723	set	PSR_ICC, %l5
724	andn	%l0, %l5, %l0	! clear ICC bits in %psr
725	and	%l4, %l5, %l4	! clear non-ICC bits in user value
726	or	%l4, %l0, %l4	! or them in... mix mix mix
727
728	wr	%l4, 0x0, %psr	! set new %psr
729	WRITE_PAUSE		! TI scumbags...
730
731	jmp	%l2		! advance over trap instruction
732	rett	%l2 + 0x4	! like this...
733
734sun4m_nmi_error:
735	/* NMI async memory error handling. */
736	sethi	%hi(0x80000000), %l4
737	sethi	%hi(sun4m_irq_global), %o5
738	ld	[%o5 + %lo(sun4m_irq_global)], %l5
739	st	%l4, [%l5 + 0x0c]	! sun4m_irq_global->mask_set=0x80000000
740	WRITE_PAUSE
741	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
742	WRITE_PAUSE
743	or	%l0, PSR_PIL, %l4
744	wr	%l4, 0x0, %psr
745	WRITE_PAUSE
746	wr	%l4, PSR_ET, %psr
747	WRITE_PAUSE
748	call	sun4m_nmi
749	 nop
750	st	%l4, [%l5 + 0x08]	! sun4m_irq_global->mask_clear=0x80000000
751	WRITE_PAUSE
752	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
753	WRITE_PAUSE
754	RESTORE_ALL
755
756#ifndef CONFIG_SMP
757	.align	4
758	.globl	linux_trap_ipi15_sun4m
759linux_trap_ipi15_sun4m:
760	SAVE_ALL
761
762	ba	sun4m_nmi_error
763	 nop
764#endif /* CONFIG_SMP */
765
766	.align	4
767	.globl	srmmu_fault
768srmmu_fault:
769	mov	0x400, %l5
770	mov	0x300, %l4
771
772LEON_PI(lda	[%l5] ASI_LEON_MMUREGS, %l6)	! read sfar first
773SUN_PI_(lda	[%l5] ASI_M_MMUREGS, %l6)	! read sfar first
774
775LEON_PI(lda	[%l4] ASI_LEON_MMUREGS, %l5)	! read sfsr last
776SUN_PI_(lda	[%l4] ASI_M_MMUREGS, %l5)	! read sfsr last
777
778	andn	%l6, 0xfff, %l6
779	srl	%l5, 6, %l5			! and encode all info into l7
780
781	and	%l5, 2, %l5
782	or	%l5, %l6, %l6
783
784	or	%l6, %l7, %l7			! l7 = [addr,write,txtfault]
785
786	SAVE_ALL
787
788	mov	%l7, %o1
789	mov	%l7, %o2
790	and	%o1, 1, %o1		! arg2 = text_faultp
791	mov	%l7, %o3
792	and	%o2, 2, %o2		! arg3 = writep
793	andn	%o3, 0xfff, %o3		! arg4 = faulting address
794
795	wr	%l0, PSR_ET, %psr
796	WRITE_PAUSE
797
798	call	do_sparc_fault
799	 add	%sp, STACKFRAME_SZ, %o0	! arg1 = pt_regs ptr
800
801	RESTORE_ALL
802
803	.align	4
804sunos_execv:
805	.globl	sunos_execv
806	b	sys_execve
807	 clr	%i2
808
809	.align	4
810	.globl	sys_sigstack
811sys_sigstack:
812	mov	%o7, %l5
813	mov	%fp, %o2
814	call	do_sys_sigstack
815	 mov	%l5, %o7
816
817	.align	4
818	.globl	sys_sigreturn
819sys_sigreturn:
820	call	do_sigreturn
821	 add	%sp, STACKFRAME_SZ, %o0
822
823	ld	[%curptr + TI_FLAGS], %l5
824	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
825	be	1f
826	 nop
827
828	call	syscall_trace
829	 mov	1, %o1
830
8311:
832	/* We don't want to muck with user registers like a
833	 * normal syscall, just return.
834	 */
835	RESTORE_ALL
836
837	.align	4
838	.globl	sys_rt_sigreturn
839sys_rt_sigreturn:
840	call	do_rt_sigreturn
841	 add	%sp, STACKFRAME_SZ, %o0
842
843	ld	[%curptr + TI_FLAGS], %l5
844	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
845	be	1f
846	 nop
847
848	add	%sp, STACKFRAME_SZ, %o0
849	call	syscall_trace
850	 mov	1, %o1
851
8521:
853	/* We are returning to a signal handler. */
854	RESTORE_ALL
855
856	/* Now that we have a real sys_clone, sys_fork() is
857	 * implemented in terms of it.  Our _real_ implementation
858	 * of SunOS vfork() will use sys_vfork().
859	 *
860	 * XXX These three should be consolidated into mostly shared
861	 * XXX code just like on sparc64... -DaveM
862	 */
863	.align	4
864	.globl	sys_fork, flush_patch_two
865sys_fork:
866	mov	%o7, %l5
867flush_patch_two:
868	FLUSH_ALL_KERNEL_WINDOWS;
869	ld	[%curptr + TI_TASK], %o4
870	rd	%psr, %g4
871	WRITE_PAUSE
872	rd	%wim, %g5
873	WRITE_PAUSE
874	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
875	add	%sp, STACKFRAME_SZ, %o0
876	call	sparc_fork
877	 mov	%l5, %o7
878
879	/* Whee, kernel threads! */
880	.globl	sys_clone, flush_patch_three
881sys_clone:
882	mov	%o7, %l5
883flush_patch_three:
884	FLUSH_ALL_KERNEL_WINDOWS;
885	ld	[%curptr + TI_TASK], %o4
886	rd	%psr, %g4
887	WRITE_PAUSE
888	rd	%wim, %g5
889	WRITE_PAUSE
890	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
891	add	%sp, STACKFRAME_SZ, %o0
892	call	sparc_clone
893	 mov	%l5, %o7
894
895	/* Whee, real vfork! */
896	.globl	sys_vfork, flush_patch_four
897sys_vfork:
898flush_patch_four:
899	FLUSH_ALL_KERNEL_WINDOWS;
900	ld	[%curptr + TI_TASK], %o4
901	rd	%psr, %g4
902	WRITE_PAUSE
903	rd	%wim, %g5
904	WRITE_PAUSE
905	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
906	sethi	%hi(sparc_vfork), %l1
907	jmpl	%l1 + %lo(sparc_vfork), %g0
908	 add	%sp, STACKFRAME_SZ, %o0
909
910        .align  4
911linux_sparc_ni_syscall:
912	sethi   %hi(sys_ni_syscall), %l7
913	b       do_syscall
914	 or     %l7, %lo(sys_ni_syscall), %l7
915
916linux_syscall_trace:
917	add	%sp, STACKFRAME_SZ, %o0
918	call	syscall_trace
919	 mov	0, %o1
920	cmp	%o0, 0
921	bne	3f
922	 mov	-ENOSYS, %o0
923
924	/* Syscall tracing can modify the registers.  */
925	ld	[%sp + STACKFRAME_SZ + PT_G1], %g1
926	sethi	%hi(sys_call_table), %l7
927	ld	[%sp + STACKFRAME_SZ + PT_I0], %i0
928	or	%l7, %lo(sys_call_table), %l7
929	ld	[%sp + STACKFRAME_SZ + PT_I1], %i1
930	ld	[%sp + STACKFRAME_SZ + PT_I2], %i2
931	ld	[%sp + STACKFRAME_SZ + PT_I3], %i3
932	ld	[%sp + STACKFRAME_SZ + PT_I4], %i4
933	ld	[%sp + STACKFRAME_SZ + PT_I5], %i5
934	cmp	%g1, NR_syscalls
935	bgeu	3f
936	 mov	-ENOSYS, %o0
937
938	sll	%g1, 2, %l4
939	mov	%i0, %o0
940	ld	[%l7 + %l4], %l7
941	mov	%i1, %o1
942	mov	%i2, %o2
943	mov	%i3, %o3
944	b	2f
945	 mov	%i4, %o4
946
947	.globl	ret_from_fork
948ret_from_fork:
949	call	schedule_tail
950	 ld	[%g3 + TI_TASK], %o0
951	b	ret_sys_call
952	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
953
954	.globl	ret_from_kernel_thread
955ret_from_kernel_thread:
956	call	schedule_tail
957	 ld	[%g3 + TI_TASK], %o0
958	ld	[%sp + STACKFRAME_SZ + PT_G1], %l0
959	call	%l0
960	 ld	[%sp + STACKFRAME_SZ + PT_G2], %o0
961	rd	%psr, %l1
962	ld	[%sp + STACKFRAME_SZ + PT_PSR], %l0
963	andn	%l0, PSR_CWP, %l0
964	nop
965	and	%l1, PSR_CWP, %l1
966	or	%l0, %l1, %l0
967	st	%l0, [%sp + STACKFRAME_SZ + PT_PSR]
968	b	ret_sys_call
969	 mov	0, %o0
970
971	/* Linux native system calls enter here... */
972	.align	4
973	.globl	linux_sparc_syscall
974linux_sparc_syscall:
975	sethi	%hi(PSR_SYSCALL), %l4
976	or	%l0, %l4, %l0
977	/* Direct access to user regs, must faster. */
978	cmp	%g1, NR_syscalls
979	bgeu	linux_sparc_ni_syscall
980	 sll	%g1, 2, %l4
981	ld	[%l7 + %l4], %l7
982
983do_syscall:
984	SAVE_ALL_HEAD
985	 rd	%wim, %l3
986
987	wr	%l0, PSR_ET, %psr
988	mov	%i0, %o0
989	mov	%i1, %o1
990	mov	%i2, %o2
991
992	ld	[%curptr + TI_FLAGS], %l5
993	mov	%i3, %o3
994	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
995	mov	%i4, %o4
996	bne	linux_syscall_trace
997	 mov	%i0, %l6
9982:
999	call	%l7
1000	 mov	%i5, %o5
1001
10023:
1003	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
1004
1005ret_sys_call:
1006	ld	[%curptr + TI_FLAGS], %l5
1007	cmp	%o0, -ERESTART_RESTARTBLOCK
1008	ld	[%sp + STACKFRAME_SZ + PT_PSR], %g3
1009	set	PSR_C, %g2
1010	bgeu	1f
1011	 andcc	%l5, _TIF_SYSCALL_TRACE, %g0
1012
1013	/* System call success, clear Carry condition code. */
1014	andn	%g3, %g2, %g3
1015	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]
1016	bne	linux_syscall_trace2
1017	 ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
1018	add	%l1, 0x4, %l2			/* npc = npc+4 */
1019	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
1020	b	ret_trap_entry
1021	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
10221:
1023	/* System call failure, set Carry condition code.
1024	 * Also, get abs(errno) to return to the process.
1025	 */
1026	sub	%g0, %o0, %o0
1027	or	%g3, %g2, %g3
1028	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
1029	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]
1030	bne	linux_syscall_trace2
1031	 ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
1032	add	%l1, 0x4, %l2			/* npc = npc+4 */
1033	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
1034	b	ret_trap_entry
1035	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
1036
1037linux_syscall_trace2:
1038	add	%sp, STACKFRAME_SZ, %o0
1039	mov	1, %o1
1040	call	syscall_trace
1041	 add	%l1, 0x4, %l2			/* npc = npc+4 */
1042	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
1043	b	ret_trap_entry
1044	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
1045
1046
1047/* Saving and restoring the FPU state is best done from lowlevel code.
1048 *
1049 * void fpsave(unsigned long *fpregs, unsigned long *fsr,
1050 *             void *fpqueue, unsigned long *fpqdepth)
1051 */
1052
1053	.globl	fpsave
1054fpsave:
1055	st	%fsr, [%o1]	! this can trap on us if fpu is in bogon state
1056	ld	[%o1], %g1
1057	set	0x2000, %g4
1058	andcc	%g1, %g4, %g0
1059	be	2f
1060	 mov	0, %g2
1061
1062	/* We have an fpqueue to save. */
10631:
1064	std	%fq, [%o2]
1065fpsave_magic:
1066	st	%fsr, [%o1]
1067	ld	[%o1], %g3
1068	andcc	%g3, %g4, %g0
1069	add	%g2, 1, %g2
1070	bne	1b
1071	 add	%o2, 8, %o2
1072
10732:
1074	st	%g2, [%o3]
1075
1076	std	%f0, [%o0 + 0x00]
1077	std	%f2, [%o0 + 0x08]
1078	std	%f4, [%o0 + 0x10]
1079	std	%f6, [%o0 + 0x18]
1080	std	%f8, [%o0 + 0x20]
1081	std	%f10, [%o0 + 0x28]
1082	std	%f12, [%o0 + 0x30]
1083	std	%f14, [%o0 + 0x38]
1084	std	%f16, [%o0 + 0x40]
1085	std	%f18, [%o0 + 0x48]
1086	std	%f20, [%o0 + 0x50]
1087	std	%f22, [%o0 + 0x58]
1088	std	%f24, [%o0 + 0x60]
1089	std	%f26, [%o0 + 0x68]
1090	std	%f28, [%o0 + 0x70]
1091	retl
1092	 std	%f30, [%o0 + 0x78]
1093
1094	/* Thanks for Theo Deraadt and the authors of the Sprite/netbsd/openbsd
1095	 * code for pointing out this possible deadlock, while we save state
1096	 * above we could trap on the fsr store so our low level fpu trap
1097	 * code has to know how to deal with this.
1098	 */
1099fpsave_catch:
1100	b	fpsave_magic + 4
1101	 st	%fsr, [%o1]
1102
1103fpsave_catch2:
1104	b	fpsave + 4
1105	 st	%fsr, [%o1]
1106
1107	/* void fpload(unsigned long *fpregs, unsigned long *fsr); */
1108
1109	.globl	fpload
1110fpload:
1111	ldd	[%o0 + 0x00], %f0
1112	ldd	[%o0 + 0x08], %f2
1113	ldd	[%o0 + 0x10], %f4
1114	ldd	[%o0 + 0x18], %f6
1115	ldd	[%o0 + 0x20], %f8
1116	ldd	[%o0 + 0x28], %f10
1117	ldd	[%o0 + 0x30], %f12
1118	ldd	[%o0 + 0x38], %f14
1119	ldd	[%o0 + 0x40], %f16
1120	ldd	[%o0 + 0x48], %f18
1121	ldd	[%o0 + 0x50], %f20
1122	ldd	[%o0 + 0x58], %f22
1123	ldd	[%o0 + 0x60], %f24
1124	ldd	[%o0 + 0x68], %f26
1125	ldd	[%o0 + 0x70], %f28
1126	ldd	[%o0 + 0x78], %f30
1127	ld	[%o1], %fsr
1128	retl
1129	 nop
1130
1131	/* __ndelay and __udelay take two arguments:
1132	 * 0 - nsecs or usecs to delay
1133	 * 1 - per_cpu udelay_val (loops per jiffy)
1134	 *
1135	 * Note that ndelay gives HZ times higher resolution but has a 10ms
1136	 * limit.  udelay can handle up to 1s.
1137	 */
1138	.globl	__ndelay
1139__ndelay:
1140	save	%sp, -STACKFRAME_SZ, %sp
1141	mov	%i0, %o0		! round multiplier up so large ns ok
1142	mov	0x1ae, %o1		! 2**32 / (1 000 000 000 / HZ)
1143	umul	%o0, %o1, %o0
1144	rd	%y, %o1
1145	mov	%i1, %o1		! udelay_val
1146	umul	%o0, %o1, %o0
1147	rd	%y, %o1
1148	ba	delay_continue
1149	 mov	%o1, %o0		! >>32 later for better resolution
1150
1151	.globl	__udelay
1152__udelay:
1153	save	%sp, -STACKFRAME_SZ, %sp
1154	mov	%i0, %o0
1155	sethi	%hi(0x10c7), %o1	! round multiplier up so large us ok
1156	or	%o1, %lo(0x10c7), %o1	! 2**32 / 1 000 000
1157	umul	%o0, %o1, %o0
1158	rd	%y, %o1
1159	mov	%i1, %o1		! udelay_val
1160	umul	%o0, %o1, %o0
1161	rd	%y, %o1
1162	sethi	%hi(0x028f4b62), %l0	! Add in rounding constant * 2**32,
1163	or	%g0, %lo(0x028f4b62), %l0
1164	addcc	%o0, %l0, %o0		! 2**32 * 0.009 999
1165	bcs,a	3f
1166	 add	%o1, 0x01, %o1
11673:
1168	mov	HZ, %o0			! >>32 earlier for wider range
1169	umul	%o0, %o1, %o0
1170	rd	%y, %o1
1171
1172delay_continue:
1173	cmp	%o0, 0x0
11741:
1175	bne	1b
1176	 subcc	%o0, 1, %o0
1177
1178	ret
1179	restore
1180EXPORT_SYMBOL(__udelay)
1181EXPORT_SYMBOL(__ndelay)
1182
1183	/* Handle a software breakpoint */
1184	/* We have to inform parent that child has stopped */
1185	.align 4
1186	.globl breakpoint_trap
1187breakpoint_trap:
1188	rd	%wim,%l3
1189	SAVE_ALL
1190	wr 	%l0, PSR_ET, %psr
1191	WRITE_PAUSE
1192
1193	st	%i0, [%sp + STACKFRAME_SZ + PT_G0] ! for restarting syscalls
1194	call	sparc_breakpoint
1195	 add	%sp, STACKFRAME_SZ, %o0
1196
1197	RESTORE_ALL
1198
1199#ifdef CONFIG_KGDB
1200	ENTRY(kgdb_trap_low)
1201	rd	%wim,%l3
1202	SAVE_ALL
1203	wr 	%l0, PSR_ET, %psr
1204	WRITE_PAUSE
1205
1206	mov	%l7, %o0		! trap_level
1207	call	kgdb_trap
1208	 add	%sp, STACKFRAME_SZ, %o1	! struct pt_regs *regs
1209
1210	RESTORE_ALL
1211	ENDPROC(kgdb_trap_low)
1212#endif
1213
1214	.align	4
1215	.globl	flush_patch_exception
1216flush_patch_exception:
1217	FLUSH_ALL_KERNEL_WINDOWS;
1218	ldd	[%o0], %o6
1219	jmpl	%o7 + 0xc, %g0			! see asm-sparc/processor.h
1220	 mov	1, %g1				! signal EFAULT condition
1221
1222	.align	4
1223	.globl	kill_user_windows, kuw_patch1_7win
1224	.globl	kuw_patch1
1225kuw_patch1_7win:	sll	%o3, 6, %o3
1226
1227	/* No matter how much overhead this routine has in the worst
1228	 * case scenario, it is several times better than taking the
1229	 * traps with the old method of just doing flush_user_windows().
1230	 */
1231kill_user_windows:
1232	ld	[%g6 + TI_UWINMASK], %o0	! get current umask
1233	orcc	%g0, %o0, %g0			! if no bits set, we are done
1234	be	3f				! nothing to do
1235	 rd	%psr, %o5			! must clear interrupts
1236	or	%o5, PSR_PIL, %o4		! or else that could change
1237	wr	%o4, 0x0, %psr			! the uwinmask state
1238	WRITE_PAUSE				! burn them cycles
12391:
1240	ld	[%g6 + TI_UWINMASK], %o0	! get consistent state
1241	orcc	%g0, %o0, %g0			! did an interrupt come in?
1242	be	4f				! yep, we are done
1243	 rd	%wim, %o3			! get current wim
1244	srl	%o3, 1, %o4			! simulate a save
1245kuw_patch1:
1246	sll	%o3, 7, %o3			! compute next wim
1247	or	%o4, %o3, %o3			! result
1248	andncc	%o0, %o3, %o0			! clean this bit in umask
1249	bne	kuw_patch1			! not done yet
1250	 srl	%o3, 1, %o4			! begin another save simulation
1251	wr	%o3, 0x0, %wim			! set the new wim
1252	st	%g0, [%g6 + TI_UWINMASK]	! clear uwinmask
12534:
1254	wr	%o5, 0x0, %psr			! re-enable interrupts
1255	WRITE_PAUSE				! burn baby burn
12563:
1257	retl					! return
1258	 st	%g0, [%g6 + TI_W_SAVED]		! no windows saved
1259
1260	.align	4
1261	.globl	restore_current
1262restore_current:
1263	LOAD_CURRENT(g6, o0)
1264	retl
1265	 nop
1266
1267#ifdef CONFIG_PCIC_PCI
1268#include <asm/pcic.h>
1269
1270	.align	4
1271	.globl	linux_trap_ipi15_pcic
1272linux_trap_ipi15_pcic:
1273	rd	%wim, %l3
1274	SAVE_ALL
1275
1276	/*
1277	 * First deactivate NMI
1278	 * or we cannot drop ET, cannot get window spill traps.
1279	 * The busy loop is necessary because the PIO error
1280	 * sometimes does not go away quickly and we trap again.
1281	 */
1282	sethi	%hi(pcic_regs), %o1
1283	ld	[%o1 + %lo(pcic_regs)], %o2
1284
1285	! Get pending status for printouts later.
1286	ld	[%o2 + PCI_SYS_INT_PENDING], %o0
1287
1288	mov	PCI_SYS_INT_PENDING_CLEAR_ALL, %o1
1289	stb	%o1, [%o2 + PCI_SYS_INT_PENDING_CLEAR]
12901:
1291	ld	[%o2 + PCI_SYS_INT_PENDING], %o1
1292	andcc	%o1, ((PCI_SYS_INT_PENDING_PIO|PCI_SYS_INT_PENDING_PCI)>>24), %g0
1293	bne	1b
1294	 nop
1295
1296	or	%l0, PSR_PIL, %l4
1297	wr	%l4, 0x0, %psr
1298	WRITE_PAUSE
1299	wr	%l4, PSR_ET, %psr
1300	WRITE_PAUSE
1301
1302	call	pcic_nmi
1303	 add	%sp, STACKFRAME_SZ, %o1	! struct pt_regs *regs
1304	RESTORE_ALL
1305
1306	.globl	pcic_nmi_trap_patch
1307pcic_nmi_trap_patch:
1308	sethi	%hi(linux_trap_ipi15_pcic), %l3
1309	jmpl	%l3 + %lo(linux_trap_ipi15_pcic), %g0
1310	 rd	%psr, %l0
1311	.word	0
1312
1313#endif /* CONFIG_PCIC_PCI */
1314
1315	.globl	flushw_all
1316flushw_all:
1317	save	%sp, -0x40, %sp
1318	save	%sp, -0x40, %sp
1319	save	%sp, -0x40, %sp
1320	save	%sp, -0x40, %sp
1321	save	%sp, -0x40, %sp
1322	save	%sp, -0x40, %sp
1323	save	%sp, -0x40, %sp
1324	restore
1325	restore
1326	restore
1327	restore
1328	restore
1329	restore
1330	ret
1331	 restore
1332
1333#ifdef CONFIG_SMP
1334ENTRY(hard_smp_processor_id)
1335661:	rd		%tbr, %g1
1336	srl		%g1, 12, %o0
1337	and		%o0, 3, %o0
1338	.section	.cpuid_patch, "ax"
1339	/* Instruction location. */
1340	.word		661b
1341	/* SUN4D implementation. */
1342	lda		[%g0] ASI_M_VIKING_TMP1, %o0
1343	nop
1344	nop
1345	/* LEON implementation. */
1346	rd		%asr17, %o0
1347	srl		%o0, 0x1c, %o0
1348	nop
1349	.previous
1350	retl
1351	 nop
1352ENDPROC(hard_smp_processor_id)
1353#endif
1354
1355/* End of entry.S */
1356