1/*
2 * P3041DS Device Tree Source
3 *
4 * Copyright 2010 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "p3041si-pre.dtsi"
36
37/ {
38	model = "fsl,P3041DS";
39	compatible = "fsl,P3041DS";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	aliases{
45		phy_rgmii_0 = &phy_rgmii_0;
46		phy_rgmii_1 = &phy_rgmii_1;
47		phy_sgmii_1c = &phy_sgmii_1c;
48		phy_sgmii_1d = &phy_sgmii_1d;
49		phy_sgmii_1e = &phy_sgmii_1e;
50		phy_sgmii_1f = &phy_sgmii_1f;
51		phy_xgmii_1 = &phy_xgmii_1;
52		phy_xgmii_2 = &phy_xgmii_2;
53		emi1_rgmii = &hydra_mdio_rgmii;
54		emi1_sgmii = &hydra_mdio_sgmii;
55		emi2_xgmii = &hydra_mdio_xgmii;
56	};
57
58	memory {
59		device_type = "memory";
60	};
61
62	reserved-memory {
63		#address-cells = <2>;
64		#size-cells = <2>;
65		ranges;
66
67		bman_fbpr: bman-fbpr {
68			size = <0 0x1000000>;
69			alignment = <0 0x1000000>;
70		};
71		qman_fqd: qman-fqd {
72			size = <0 0x400000>;
73			alignment = <0 0x400000>;
74		};
75		qman_pfdr: qman-pfdr {
76			size = <0 0x2000000>;
77			alignment = <0 0x2000000>;
78		};
79	};
80
81	dcsr: dcsr@f00000000 {
82		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
83	};
84
85	bportals: bman-portals@ff4000000 {
86		ranges = <0x0 0xf 0xf4000000 0x200000>;
87	};
88
89	qportals: qman-portals@ff4200000 {
90		ranges = <0x0 0xf 0xf4200000 0x200000>;
91	};
92
93	soc: soc@ffe000000 {
94		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
95		reg = <0xf 0xfe000000 0 0x00001000>;
96		spi@110000 {
97			flash@0 {
98				#address-cells = <1>;
99				#size-cells = <1>;
100				compatible = "spansion,s25sl12801", "jedec,spi-nor";
101				reg = <0>;
102				spi-max-frequency = <35000000>; /* input clock */
103				partition@u-boot {
104					label = "u-boot";
105					reg = <0x00000000 0x00100000>;
106					read-only;
107				};
108				partition@kernel {
109					label = "kernel";
110					reg = <0x00100000 0x00500000>;
111					read-only;
112				};
113				partition@dtb {
114					label = "dtb";
115					reg = <0x00600000 0x00100000>;
116					read-only;
117				};
118				partition@fs {
119					label = "file system";
120					reg = <0x00700000 0x00900000>;
121				};
122			};
123		};
124
125		i2c@118100 {
126			eeprom@51 {
127				compatible = "atmel,24c256";
128				reg = <0x51>;
129			};
130			eeprom@52 {
131				compatible = "atmel,24c256";
132				reg = <0x52>;
133			};
134		};
135
136		i2c@119100 {
137			rtc@68 {
138				compatible = "dallas,ds3232";
139				reg = <0x68>;
140				interrupts = <0x1 0x1 0 0>;
141			};
142			ina220@40 {
143				compatible = "ti,ina220";
144				reg = <0x40>;
145				shunt-resistor = <1000>;
146			};
147			ina220@41 {
148				compatible = "ti,ina220";
149				reg = <0x41>;
150				shunt-resistor = <1000>;
151			};
152			ina220@44 {
153				compatible = "ti,ina220";
154				reg = <0x44>;
155				shunt-resistor = <1000>;
156			};
157			ina220@45 {
158				compatible = "ti,ina220";
159				reg = <0x45>;
160				shunt-resistor = <1000>;
161			};
162			adt7461@4c {
163				compatible = "adi,adt7461";
164				reg = <0x4c>;
165			};
166		};
167
168		fman@400000{
169			ethernet@e0000 {
170				phy-handle = <&phy_sgmii_1c>;
171				phy-connection-type = "sgmii";
172			};
173
174			ethernet@e2000 {
175				phy-handle = <&phy_sgmii_1d>;
176				phy-connection-type = "sgmii";
177			};
178
179			ethernet@e4000 {
180				phy-handle = <&phy_sgmii_1e>;
181				phy-connection-type = "sgmii";
182			};
183
184			ethernet@e6000 {
185				phy-handle = <&phy_sgmii_1f>;
186				phy-connection-type = "sgmii";
187			};
188
189			ethernet@e8000 {
190				phy-handle = <&phy_rgmii_1>;
191				phy-connection-type = "rgmii";
192			};
193
194			ethernet@f0000 {
195				phy-handle = <&phy_xgmii_1>;
196				phy-connection-type = "xgmii";
197			};
198
199			hydra_mdio_xgmii: mdio@f1000 {
200				status = "disabled";
201
202				phy_xgmii_1: ethernet-phy@4 {
203					compatible = "ethernet-phy-ieee802.3-c45";
204					reg = <0x4>;
205				};
206
207				phy_xgmii_2: ethernet-phy@0 {
208					compatible = "ethernet-phy-ieee802.3-c45";
209					reg = <0x0>;
210				};
211			};
212		};
213	};
214
215	rio: rapidio@ffe0c0000 {
216		reg = <0xf 0xfe0c0000 0 0x11000>;
217
218		port1 {
219			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
220		};
221		port2 {
222			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
223		};
224	};
225
226	lbc: localbus@ffe124000 {
227		reg = <0xf 0xfe124000 0 0x1000>;
228		ranges = <0 0 0xf 0xe8000000 0x08000000
229			  2 0 0xf 0xffa00000 0x00040000
230			  3 0 0xf 0xffdf0000 0x00008000>;
231
232		flash@0,0 {
233			compatible = "cfi-flash";
234			reg = <0 0 0x08000000>;
235			bank-width = <2>;
236			device-width = <2>;
237		};
238
239		nand@2,0 {
240			#address-cells = <1>;
241			#size-cells = <1>;
242			compatible = "fsl,elbc-fcm-nand";
243			reg = <0x2 0x0 0x40000>;
244
245			partition@0 {
246				label = "NAND U-Boot Image";
247				reg = <0x0 0x02000000>;
248				read-only;
249			};
250
251			partition@2000000 {
252				label = "NAND Root File System";
253				reg = <0x02000000 0x10000000>;
254			};
255
256			partition@12000000 {
257				label = "NAND Compressed RFS Image";
258				reg = <0x12000000 0x08000000>;
259			};
260
261			partition@1a000000 {
262				label = "NAND Linux Kernel Image";
263				reg = <0x1a000000 0x04000000>;
264			};
265
266			partition@1e000000 {
267				label = "NAND DTB Image";
268				reg = <0x1e000000 0x01000000>;
269			};
270
271			partition@1f000000 {
272				label = "NAND Writable User area";
273				reg = <0x1f000000 0x21000000>;
274			};
275		};
276
277		board-control@3,0 {
278			#address-cells = <1>;
279			#size-cells = <1>;
280			compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
281			reg = <3 0 0x30>;
282			ranges = <0 3 0 0x30>;
283
284			mdio-mux-emi1 {
285				#address-cells = <1>;
286				#size-cells = <0>;
287				compatible = "mdio-mux-mmioreg", "mdio-mux";
288				mdio-parent-bus = <&mdio0>;
289				reg = <9 1>;
290				mux-mask = <0x78>;
291
292				hydra_mdio_rgmii: rgmii-mdio@8 {
293					#address-cells = <1>;
294					#size-cells = <0>;
295					reg = <8>;
296					status = "disabled";
297
298					phy_rgmii_0: ethernet-phy@0 {
299						reg = <0x0>;
300					};
301
302					phy_rgmii_1: ethernet-phy@1 {
303						reg = <0x1>;
304					};
305				};
306
307				hydra_mdio_sgmii: sgmii-mdio@28 {
308					#address-cells = <1>;
309					#size-cells = <0>;
310					reg = <0x28>;
311					status = "disabled";
312
313					phy_sgmii_1c: ethernet-phy@1c {
314						reg = <0x1c>;
315					};
316
317					phy_sgmii_1d: ethernet-phy@1d {
318						reg = <0x1d>;
319					};
320
321					phy_sgmii_1e: ethernet-phy@1e {
322						reg = <0x1e>;
323					};
324
325					phy_sgmii_1f: ethernet-phy@1f {
326						reg = <0x1f>;
327					};
328				};
329			};
330		};
331	};
332
333	pci0: pcie@ffe200000 {
334		reg = <0xf 0xfe200000 0 0x1000>;
335		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
336			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
337		pcie@0 {
338			ranges = <0x02000000 0 0xe0000000
339				  0x02000000 0 0xe0000000
340				  0 0x20000000
341
342				  0x01000000 0 0x00000000
343				  0x01000000 0 0x00000000
344				  0 0x00010000>;
345		};
346	};
347
348	pci1: pcie@ffe201000 {
349		reg = <0xf 0xfe201000 0 0x1000>;
350		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
351			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
352		pcie@0 {
353			ranges = <0x02000000 0 0xe0000000
354				  0x02000000 0 0xe0000000
355				  0 0x20000000
356
357				  0x01000000 0 0x00000000
358				  0x01000000 0 0x00000000
359				  0 0x00010000>;
360		};
361	};
362
363	pci2: pcie@ffe202000 {
364		reg = <0xf 0xfe202000 0 0x1000>;
365		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
366			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
367		pcie@0 {
368			ranges = <0x02000000 0 0xe0000000
369				  0x02000000 0 0xe0000000
370				  0 0x20000000
371
372				  0x01000000 0 0x00000000
373				  0x01000000 0 0x00000000
374				  0 0x00010000>;
375		};
376	};
377
378	pci3: pcie@ffe203000 {
379		reg = <0xf 0xfe203000 0 0x1000>;
380		ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
381			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
382		pcie@0 {
383			ranges = <0x02000000 0 0xe0000000
384				  0x02000000 0 0xe0000000
385				  0 0x20000000
386
387				  0x01000000 0 0x00000000
388				  0x01000000 0 0x00000000
389				  0 0x00010000>;
390		};
391	};
392};
393
394/include/ "p3041si-post.dtsi"
395