1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * the ISA Virtual Support Module of AMD CS5536
4 *
5 * Copyright (C) 2007 Lemote, Inc.
6 * Author : jlliu, liujl@lemote.com
7 *
8 * Copyright (C) 2009 Lemote, Inc.
9 * Author: Wu Zhangjin, wuzhangjin@gmail.com
10 */
11
12 #include <linux/pci.h>
13 #include <cs5536/cs5536.h>
14 #include <cs5536/cs5536_pci.h>
15
16 /* common variables for PCI_ISA_READ/WRITE_BAR */
17 static const u32 divil_msr_reg[6] = {
18 DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO),
19 DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ),
20 DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI),
21 };
22
23 static const u32 soft_bar_flag[6] = {
24 SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG,
25 SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG,
26 };
27
28 static const u32 sb_msr_reg[6] = {
29 SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2),
30 SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5),
31 };
32
33 static const u32 bar_space_range[6] = {
34 CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE,
35 CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE,
36 };
37
38 static const int bar_space_len[6] = {
39 CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH,
40 CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH,
41 };
42
43 /*
44 * enable the divil module bar space.
45 *
46 * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg
47 * and the RCONFx(0~5) reg to use the modules.
48 */
divil_lbar_enable(void)49 static void divil_lbar_enable(void)
50 {
51 u32 hi, lo;
52 int offset;
53
54 /*
55 * The DIVIL IRQ is not used yet. and make the RCONF0 reserved.
56 */
57
58 for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
59 _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
60 hi |= 0x01;
61 _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
62 }
63 }
64
65 /*
66 * disable the divil module bar space.
67 */
divil_lbar_disable(void)68 static void divil_lbar_disable(void)
69 {
70 u32 hi, lo;
71 int offset;
72
73 for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) {
74 _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo);
75 hi &= ~0x01;
76 _wrmsr(DIVIL_MSR_REG(offset), hi, lo);
77 }
78 }
79
80 /*
81 * BAR write: write value to the n BAR
82 */
83
pci_isa_write_bar(int n,u32 value)84 void pci_isa_write_bar(int n, u32 value)
85 {
86 u32 hi = 0, lo = value;
87
88 if (value == PCI_BAR_RANGE_MASK) {
89 _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
90 lo |= soft_bar_flag[n];
91 _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
92 } else if (value & 0x01) {
93 /* NATIVE reg */
94 hi = 0x0000f001;
95 lo &= bar_space_range[n];
96 _wrmsr(divil_msr_reg[n], hi, lo);
97
98 /* RCONFx is 4bytes in units for I/O space */
99 hi = ((value & 0x000ffffc) << 12) |
100 ((bar_space_len[n] - 4) << 12) | 0x01;
101 lo = ((value & 0x000ffffc) << 12) | 0x01;
102 _wrmsr(sb_msr_reg[n], hi, lo);
103 }
104 }
105
106 /*
107 * BAR read: read the n BAR
108 */
109
pci_isa_read_bar(int n)110 u32 pci_isa_read_bar(int n)
111 {
112 u32 conf_data = 0;
113 u32 hi, lo;
114
115 _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo);
116 if (lo & soft_bar_flag[n]) {
117 conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO;
118 lo &= ~soft_bar_flag[n];
119 _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo);
120 } else {
121 _rdmsr(divil_msr_reg[n], &hi, &lo);
122 conf_data = lo & bar_space_range[n];
123 conf_data |= 0x01;
124 conf_data &= ~0x02;
125 }
126 return conf_data;
127 }
128
129 /*
130 * isa_write: ISA write transfer
131 *
132 * We assume that this is not a bus master transfer.
133 */
pci_isa_write_reg(int reg,u32 value)134 void pci_isa_write_reg(int reg, u32 value)
135 {
136 u32 hi = 0, lo = value;
137 u32 temp;
138
139 switch (reg) {
140 case PCI_COMMAND:
141 if (value & PCI_COMMAND_IO)
142 divil_lbar_enable();
143 else
144 divil_lbar_disable();
145 break;
146 case PCI_STATUS:
147 _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
148 temp = lo & 0x0000ffff;
149 if ((value & PCI_STATUS_SIG_TARGET_ABORT) &&
150 (lo & SB_TAS_ERR_EN))
151 temp |= SB_TAS_ERR_FLAG;
152
153 if ((value & PCI_STATUS_REC_TARGET_ABORT) &&
154 (lo & SB_TAR_ERR_EN))
155 temp |= SB_TAR_ERR_FLAG;
156
157 if ((value & PCI_STATUS_REC_MASTER_ABORT)
158 && (lo & SB_MAR_ERR_EN))
159 temp |= SB_MAR_ERR_FLAG;
160
161 if ((value & PCI_STATUS_DETECTED_PARITY)
162 && (lo & SB_PARE_ERR_EN))
163 temp |= SB_PARE_ERR_FLAG;
164
165 lo = temp;
166 _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
167 break;
168 case PCI_CACHE_LINE_SIZE:
169 value &= 0x0000ff00;
170 _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
171 hi &= 0xffffff00;
172 hi |= (value >> 8);
173 _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo);
174 break;
175 case PCI_BAR0_REG:
176 pci_isa_write_bar(0, value);
177 break;
178 case PCI_BAR1_REG:
179 pci_isa_write_bar(1, value);
180 break;
181 case PCI_BAR2_REG:
182 pci_isa_write_bar(2, value);
183 break;
184 case PCI_BAR3_REG:
185 pci_isa_write_bar(3, value);
186 break;
187 case PCI_BAR4_REG:
188 pci_isa_write_bar(4, value);
189 break;
190 case PCI_BAR5_REG:
191 pci_isa_write_bar(5, value);
192 break;
193 case PCI_UART1_INT_REG:
194 _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
195 /* disable uart1 interrupt in PIC */
196 lo &= ~(0xf << 24);
197 if (value) /* enable uart1 interrupt in PIC */
198 lo |= (CS5536_UART1_INTR << 24);
199 _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
200 break;
201 case PCI_UART2_INT_REG:
202 _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo);
203 /* disable uart2 interrupt in PIC */
204 lo &= ~(0xf << 28);
205 if (value) /* enable uart2 interrupt in PIC */
206 lo |= (CS5536_UART2_INTR << 28);
207 _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo);
208 break;
209 case PCI_ISA_FIXUP_REG:
210 if (value) {
211 /* enable the TARGET ABORT/MASTER ABORT etc. */
212 _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
213 lo |= 0x00000063;
214 _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo);
215 }
216
217 default:
218 /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */
219 break;
220 }
221 }
222
223 /*
224 * isa_read: ISA read transfers
225 *
226 * We assume that this is not a bus master transfer.
227 */
pci_isa_read_reg(int reg)228 u32 pci_isa_read_reg(int reg)
229 {
230 u32 conf_data = 0;
231 u32 hi, lo;
232
233 switch (reg) {
234 case PCI_VENDOR_ID:
235 conf_data =
236 CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID);
237 break;
238 case PCI_COMMAND:
239 /* we just check the first LBAR for the IO enable bit, */
240 /* maybe we should changed later. */
241 _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo);
242 if (hi & 0x01)
243 conf_data |= PCI_COMMAND_IO;
244 break;
245 case PCI_STATUS:
246 conf_data |= PCI_STATUS_66MHZ;
247 conf_data |= PCI_STATUS_DEVSEL_MEDIUM;
248 conf_data |= PCI_STATUS_FAST_BACK;
249
250 _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo);
251 if (lo & SB_TAS_ERR_FLAG)
252 conf_data |= PCI_STATUS_SIG_TARGET_ABORT;
253 if (lo & SB_TAR_ERR_FLAG)
254 conf_data |= PCI_STATUS_REC_TARGET_ABORT;
255 if (lo & SB_MAR_ERR_FLAG)
256 conf_data |= PCI_STATUS_REC_MASTER_ABORT;
257 if (lo & SB_PARE_ERR_FLAG)
258 conf_data |= PCI_STATUS_DETECTED_PARITY;
259 break;
260 case PCI_CLASS_REVISION:
261 _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo);
262 conf_data = lo & 0x000000ff;
263 conf_data |= (CS5536_ISA_CLASS_CODE << 8);
264 break;
265 case PCI_CACHE_LINE_SIZE:
266 _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo);
267 hi &= 0x000000f8;
268 conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi);
269 break;
270 /*
271 * we only use the LBAR of DIVIL, no RCONF used.
272 * all of them are IO space.
273 */
274 case PCI_BAR0_REG:
275 return pci_isa_read_bar(0);
276 break;
277 case PCI_BAR1_REG:
278 return pci_isa_read_bar(1);
279 break;
280 case PCI_BAR2_REG:
281 return pci_isa_read_bar(2);
282 break;
283 case PCI_BAR3_REG:
284 break;
285 case PCI_BAR4_REG:
286 return pci_isa_read_bar(4);
287 break;
288 case PCI_BAR5_REG:
289 return pci_isa_read_bar(5);
290 break;
291 case PCI_CARDBUS_CIS:
292 conf_data = PCI_CARDBUS_CIS_POINTER;
293 break;
294 case PCI_SUBSYSTEM_VENDOR_ID:
295 conf_data =
296 CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID);
297 break;
298 case PCI_ROM_ADDRESS:
299 conf_data = PCI_EXPANSION_ROM_BAR;
300 break;
301 case PCI_CAPABILITY_LIST:
302 conf_data = PCI_CAPLIST_POINTER;
303 break;
304 case PCI_INTERRUPT_LINE:
305 /* no interrupt used here */
306 conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00);
307 break;
308 default:
309 break;
310 }
311
312 return conf_data;
313 }
314
315 /*
316 * The mfgpt timer interrupt is running early, so we must keep the south bridge
317 * mmio always enabled. Otherwise we may race with the PCI configuration which
318 * may temporarily disable it. When that happens and the timer interrupt fires,
319 * we are not able to clear it and the system will hang.
320 */
cs5536_isa_mmio_always_on(struct pci_dev * dev)321 static void cs5536_isa_mmio_always_on(struct pci_dev *dev)
322 {
323 dev->mmio_always_on = 1;
324 }
325 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
326 PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on);
327