1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3/dts-v1/;
4
5#include <dt-bindings/gpio/gpio.h>
6#include <dt-bindings/pinctrl/rockchip.h>
7#include <dt-bindings/soc/rockchip,vop2.h>
8#include "rk3566.dtsi"
9
10/ {
11	model = "Pine64 RK3566 Quartz64-A Board";
12	compatible = "pine64,quartz64-a", "rockchip,rk3566";
13
14	aliases {
15		ethernet0 = &gmac1;
16		mmc0 = &sdmmc0;
17		mmc1 = &sdhci;
18	};
19
20	chosen: chosen {
21		stdout-path = "serial2:1500000n8";
22	};
23
24	gmac1_clkin: external-gmac1-clock {
25		compatible = "fixed-clock";
26		clock-frequency = <125000000>;
27		clock-output-names = "gmac1_clkin";
28		#clock-cells = <0>;
29	};
30
31	fan: gpio_fan {
32		compatible = "gpio-fan";
33		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
34		gpio-fan,speed-map = <0    0
35				      4500 1>;
36		pinctrl-names = "default";
37		pinctrl-0 = <&fan_en_h>;
38		#cooling-cells = <2>;
39	};
40
41	hdmi-con {
42		compatible = "hdmi-connector";
43		type = "a";
44
45		port {
46			hdmi_con_in: endpoint {
47				remote-endpoint = <&hdmi_out_con>;
48			};
49		};
50	};
51
52	leds {
53		compatible = "gpio-leds";
54
55		led-work {
56			label = "work-led";
57			default-state = "off";
58			gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
59			pinctrl-names = "default";
60			pinctrl-0 = <&work_led_enable_h>;
61			retain-state-suspended;
62		};
63
64		led-diy {
65			label = "diy-led";
66			default-state = "on";
67			gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
68			linux,default-trigger = "heartbeat";
69			pinctrl-names = "default";
70			pinctrl-0 = <&diy_led_enable_h>;
71			retain-state-suspended;
72		};
73	};
74
75	rk817-sound {
76		compatible = "simple-audio-card";
77		simple-audio-card,format = "i2s";
78		simple-audio-card,name = "Analog RK817";
79		simple-audio-card,mclk-fs = <256>;
80
81		simple-audio-card,cpu {
82			sound-dai = <&i2s1_8ch>;
83		};
84
85		simple-audio-card,codec {
86			sound-dai = <&rk817>;
87		};
88	};
89
90	sdio_pwrseq: sdio-pwrseq {
91		compatible = "mmc-pwrseq-simple";
92		clocks = <&rk817 1>;
93		clock-names = "ext_clock";
94		pinctrl-names = "default";
95		pinctrl-0 = <&wifi_enable_h>;
96		post-power-on-delay-ms = <100>;
97		power-off-delay-us = <5000000>;
98		reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
99	};
100
101	spdif_dit: spdif-dit {
102		compatible = "linux,spdif-dit";
103		#sound-dai-cells = <0>;
104	};
105
106	spdif_sound: spdif-sound {
107		compatible = "simple-audio-card";
108		simple-audio-card,name = "SPDIF";
109
110		simple-audio-card,cpu {
111			sound-dai = <&spdif>;
112		};
113
114		simple-audio-card,codec {
115			sound-dai = <&spdif_dit>;
116		};
117	};
118
119	vcc12v_dcin: vcc12v_dcin {
120		compatible = "regulator-fixed";
121		regulator-name = "vcc12v_dcin";
122		regulator-always-on;
123		regulator-boot-on;
124		regulator-min-microvolt = <12000000>;
125		regulator-max-microvolt = <12000000>;
126	};
127
128	/* vbus feeds the rk817 usb input.
129	 * With no battery attached, also feeds vcc_bat+
130	 * via ON/OFF_BAT jumper
131	 */
132	vbus: vbus {
133		compatible = "regulator-fixed";
134		regulator-name = "vbus";
135		regulator-always-on;
136		regulator-boot-on;
137		regulator-min-microvolt = <5000000>;
138		regulator-max-microvolt = <5000000>;
139		vin-supply = <&vcc12v_dcin>;
140	};
141
142	vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
143		compatible = "regulator-fixed";
144		enable-active-high;
145		gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
146		pinctrl-names = "default";
147		pinctrl-0 = <&pcie_enable_h>;
148		regulator-name = "vcc3v3_pcie_p";
149		regulator-min-microvolt = <3300000>;
150		regulator-max-microvolt = <3300000>;
151		vin-supply = <&vcc_3v3>;
152	};
153
154	vcc5v0_usb: vcc5v0_usb {
155		compatible = "regulator-fixed";
156		regulator-name = "vcc5v0_usb";
157		regulator-always-on;
158		regulator-boot-on;
159		regulator-min-microvolt = <5000000>;
160		regulator-max-microvolt = <5000000>;
161		vin-supply = <&vcc12v_dcin>;
162	};
163
164	/* all four ports are controlled by one gpio
165	 * the host ports are sourced from vcc5v0_usb
166	 * the otg port is sourced from vcc5v0_midu
167	 */
168	vcc5v0_usb20_host: vcc5v0_usb20_host {
169		compatible = "regulator-fixed";
170		enable-active-high;
171		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
172		pinctrl-names = "default";
173		pinctrl-0 = <&vcc5v0_usb20_host_en>;
174		regulator-name = "vcc5v0_usb20_host";
175		regulator-min-microvolt = <5000000>;
176		regulator-max-microvolt = <5000000>;
177		vin-supply = <&vcc5v0_usb>;
178	};
179
180	vcc5v0_usb20_otg: vcc5v0_usb20_otg {
181		compatible = "regulator-fixed";
182		enable-active-high;
183		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
184		regulator-name = "vcc5v0_usb20_otg";
185		regulator-min-microvolt = <5000000>;
186		regulator-max-microvolt = <5000000>;
187		vin-supply = <&dcdc_boost>;
188	};
189
190	vcc3v3_sd: vcc3v3_sd {
191		compatible = "regulator-fixed";
192		gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
193		pinctrl-names = "default";
194		pinctrl-0 = <&vcc_sd_h>;
195		regulator-boot-on;
196		regulator-name = "vcc3v3_sd";
197		regulator-min-microvolt = <3300000>;
198		regulator-max-microvolt = <3300000>;
199		vin-supply = <&vcc_3v3>;
200	};
201
202	/* sourced from vbus and vcc_bat+ via rk817 sw5 */
203	vcc_sys: vcc_sys {
204		compatible = "regulator-fixed";
205		regulator-name = "vcc_sys";
206		regulator-always-on;
207		regulator-boot-on;
208		regulator-min-microvolt = <4400000>;
209		regulator-max-microvolt = <4400000>;
210		vin-supply = <&vbus>;
211	};
212
213	/* sourced from vcc_sys, sdio module operates internally at 3.3v */
214	vcc_wl: vcc_wl {
215		compatible = "regulator-fixed";
216		regulator-name = "vcc_wl";
217		regulator-always-on;
218		regulator-boot-on;
219		regulator-min-microvolt = <3300000>;
220		regulator-max-microvolt = <3300000>;
221		vin-supply = <&vcc_sys>;
222	};
223};
224
225&combphy1 {
226	status = "okay";
227};
228
229&combphy2 {
230	status = "okay";
231};
232
233&cpu0 {
234	cpu-supply = <&vdd_cpu>;
235};
236
237&cpu1 {
238	cpu-supply = <&vdd_cpu>;
239};
240
241&cpu2 {
242	cpu-supply = <&vdd_cpu>;
243};
244
245&cpu3 {
246	cpu-supply = <&vdd_cpu>;
247};
248
249&cpu_thermal {
250	trips {
251		cpu_hot: cpu_hot {
252			temperature = <55000>;
253			hysteresis = <2000>;
254			type = "active";
255		};
256	};
257
258	cooling-maps {
259		map1 {
260			trip = <&cpu_hot>;
261			cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
262		};
263	};
264};
265
266&gmac1 {
267	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
268	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
269	clock_in_out = "input";
270	phy-supply = <&vcc_3v3>;
271	phy-mode = "rgmii";
272	pinctrl-names = "default";
273	pinctrl-0 = <&gmac1m0_miim
274		     &gmac1m0_tx_bus2
275		     &gmac1m0_rx_bus2
276		     &gmac1m0_rgmii_clk
277		     &gmac1m0_clkinout
278		     &gmac1m0_rgmii_bus>;
279	snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
280	snps,reset-active-low;
281	/* Reset time is 20ms, 100ms for rtl8211f */
282	snps,reset-delays-us = <0 20000 100000>;
283	tx_delay = <0x30>;
284	rx_delay = <0x10>;
285	phy-handle = <&rgmii_phy1>;
286	status = "okay";
287};
288
289&gpu {
290	mali-supply = <&vdd_gpu>;
291	status = "okay";
292};
293
294&hdmi {
295	avdd-0v9-supply = <&vdda_0v9>;
296	avdd-1v8-supply = <&vcc_1v8>;
297	status = "okay";
298};
299
300&hdmi_in {
301	hdmi_in_vp0: endpoint {
302		remote-endpoint = <&vp0_out_hdmi>;
303	};
304};
305
306&hdmi_out {
307	hdmi_out_con: endpoint {
308		remote-endpoint = <&hdmi_con_in>;
309	};
310};
311
312&hdmi_sound {
313	status = "okay";
314};
315
316&i2c0 {
317	status = "okay";
318
319	vdd_cpu: regulator@1c {
320		compatible = "tcs,tcs4525";
321		reg = <0x1c>;
322		fcs,suspend-voltage-selector = <1>;
323		regulator-name = "vdd_cpu";
324		regulator-min-microvolt = <800000>;
325		regulator-max-microvolt = <1150000>;
326		regulator-ramp-delay = <2300>;
327		regulator-always-on;
328		regulator-boot-on;
329		vin-supply = <&vcc_sys>;
330
331		regulator-state-mem {
332			regulator-off-in-suspend;
333		};
334	};
335
336	rk817: pmic@20 {
337		compatible = "rockchip,rk817";
338		reg = <0x20>;
339		interrupt-parent = <&gpio0>;
340		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
341		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
342		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
343		clock-names = "mclk";
344		clocks = <&cru I2S1_MCLKOUT_TX>;
345		clock-output-names = "rk808-clkout1", "rk808-clkout2";
346		#clock-cells = <1>;
347		pinctrl-names = "default";
348		pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
349		rockchip,system-power-controller;
350		#sound-dai-cells = <0>;
351		wakeup-source;
352
353		vcc1-supply = <&vcc_sys>;
354		vcc2-supply = <&vcc_sys>;
355		vcc3-supply = <&vcc_sys>;
356		vcc4-supply = <&vcc_sys>;
357		vcc5-supply = <&vcc_sys>;
358		vcc6-supply = <&vcc_sys>;
359		vcc7-supply = <&vcc_sys>;
360		vcc8-supply = <&vcc_sys>;
361		vcc9-supply = <&dcdc_boost>;
362
363		regulators {
364			vdd_logic: DCDC_REG1 {
365				regulator-always-on;
366				regulator-boot-on;
367				regulator-min-microvolt = <500000>;
368				regulator-max-microvolt = <1350000>;
369				regulator-init-microvolt = <900000>;
370				regulator-ramp-delay = <6001>;
371				regulator-initial-mode = <0x2>;
372				regulator-name = "vdd_logic";
373				regulator-state-mem {
374					regulator-on-in-suspend;
375					regulator-suspend-microvolt = <900000>;
376				};
377			};
378
379			vdd_gpu: DCDC_REG2 {
380				regulator-always-on;
381				regulator-boot-on;
382				regulator-min-microvolt = <500000>;
383				regulator-max-microvolt = <1350000>;
384				regulator-init-microvolt = <900000>;
385				regulator-ramp-delay = <6001>;
386				regulator-initial-mode = <0x2>;
387				regulator-name = "vdd_gpu";
388					regulator-state-mem {
389					regulator-off-in-suspend;
390				};
391			};
392
393			vcc_ddr: DCDC_REG3 {
394				regulator-always-on;
395				regulator-boot-on;
396				regulator-initial-mode = <0x2>;
397				regulator-name = "vcc_ddr";
398				regulator-state-mem {
399					regulator-on-in-suspend;
400				};
401			};
402
403			vcc_3v3: DCDC_REG4 {
404				regulator-always-on;
405				regulator-boot-on;
406				regulator-min-microvolt = <3300000>;
407				regulator-max-microvolt = <3300000>;
408				regulator-initial-mode = <0x2>;
409				regulator-name = "vcc_3v3";
410				regulator-state-mem {
411					regulator-off-in-suspend;
412				};
413			};
414
415			vcca1v8_pmu: LDO_REG1 {
416				regulator-always-on;
417				regulator-boot-on;
418				regulator-min-microvolt = <1800000>;
419				regulator-max-microvolt = <1800000>;
420				regulator-name = "vcca1v8_pmu";
421				regulator-state-mem {
422					regulator-on-in-suspend;
423					regulator-suspend-microvolt = <1800000>;
424				};
425			};
426
427			vdda_0v9: LDO_REG2 {
428				regulator-always-on;
429				regulator-boot-on;
430				regulator-min-microvolt = <900000>;
431				regulator-max-microvolt = <900000>;
432				regulator-name = "vdda_0v9";
433				regulator-state-mem {
434					regulator-off-in-suspend;
435				};
436			};
437
438			vdda0v9_pmu: LDO_REG3 {
439				regulator-always-on;
440				regulator-boot-on;
441				regulator-min-microvolt = <900000>;
442				regulator-max-microvolt = <900000>;
443				regulator-name = "vdda0v9_pmu";
444				regulator-state-mem {
445					regulator-on-in-suspend;
446					regulator-suspend-microvolt = <900000>;
447				};
448			};
449
450			vccio_acodec: LDO_REG4 {
451				regulator-always-on;
452				regulator-boot-on;
453				regulator-min-microvolt = <3300000>;
454				regulator-max-microvolt = <3300000>;
455				regulator-name = "vccio_acodec";
456				regulator-state-mem {
457					regulator-off-in-suspend;
458				};
459			};
460
461			vccio_sd: LDO_REG5 {
462				regulator-always-on;
463				regulator-boot-on;
464				regulator-min-microvolt = <1800000>;
465				regulator-max-microvolt = <3300000>;
466				regulator-name = "vccio_sd";
467				regulator-state-mem {
468					regulator-off-in-suspend;
469				};
470			};
471
472			vcc3v3_pmu: LDO_REG6 {
473				regulator-always-on;
474				regulator-boot-on;
475				regulator-min-microvolt = <3300000>;
476				regulator-max-microvolt = <3300000>;
477				regulator-name = "vcc3v3_pmu";
478				regulator-state-mem {
479					regulator-on-in-suspend;
480					regulator-suspend-microvolt = <3300000>;
481				};
482			};
483
484			vcc_1v8: LDO_REG7 {
485				regulator-always-on;
486				regulator-boot-on;
487				regulator-min-microvolt = <1800000>;
488				regulator-max-microvolt = <1800000>;
489				regulator-name = "vcc_1v8";
490				regulator-state-mem {
491					regulator-off-in-suspend;
492				};
493			};
494
495			vcc1v8_dvp: LDO_REG8 {
496				regulator-always-on;
497				regulator-boot-on;
498				regulator-min-microvolt = <1800000>;
499				regulator-max-microvolt = <1800000>;
500				regulator-name = "vcc1v8_dvp";
501				regulator-state-mem {
502					regulator-off-in-suspend;
503				};
504			};
505
506			vcc2v8_dvp: LDO_REG9 {
507				regulator-always-on;
508				regulator-boot-on;
509				regulator-min-microvolt = <2800000>;
510				regulator-max-microvolt = <2800000>;
511				regulator-name = "vcc2v8_dvp";
512				regulator-state-mem {
513					regulator-off-in-suspend;
514				};
515			};
516
517			dcdc_boost: BOOST {
518				regulator-always-on;
519				regulator-boot-on;
520				regulator-min-microvolt = <5000000>;
521				regulator-max-microvolt = <5000000>;
522				regulator-name = "boost";
523				regulator-state-mem {
524					regulator-off-in-suspend;
525				};
526			};
527
528			otg_switch: OTG_SWITCH {
529				regulator-name = "otg_switch";
530				regulator-state-mem {
531					regulator-off-in-suspend;
532				};
533			};
534		};
535	};
536};
537
538/* i2c3 is exposed on con40
539 * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
540 * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
541 */
542&i2c3 {
543	status = "okay";
544};
545
546&i2s0_8ch {
547	status = "okay";
548};
549
550&i2s1_8ch {
551	pinctrl-names = "default";
552	pinctrl-0 = <&i2s1m0_sclktx
553		     &i2s1m0_lrcktx
554		     &i2s1m0_sdi0
555		     &i2s1m0_sdo0>;
556	rockchip,trcm-sync-tx-only;
557	status = "okay";
558};
559
560&mdio1 {
561	rgmii_phy1: ethernet-phy@0 {
562		compatible = "ethernet-phy-ieee802.3-c22";
563		reg = <0>;
564	};
565};
566
567&pcie2x1 {
568	pinctrl-names = "default";
569	pinctrl-0 = <&pcie_reset_h>;
570	reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
571	vpcie3v3-supply = <&vcc3v3_pcie_p>;
572	status = "okay";
573};
574
575&pinctrl {
576	bt {
577		bt_enable_h: bt-enable-h {
578			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
579		};
580
581		bt_host_wake_l: bt-host-wake-l {
582			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
583		};
584
585		bt_wake_l: bt-wake-l {
586			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
587		};
588	};
589
590	fan {
591		fan_en_h: fan-en-h {
592			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
593		};
594	};
595
596	leds {
597		work_led_enable_h: work-led-enable-h {
598			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
599		};
600
601		diy_led_enable_h: diy-led-enable-h {
602			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
603		};
604	};
605
606	pcie {
607		pcie_enable_h: pcie-enable-h {
608			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
609		};
610
611		pcie_reset_h: pcie-reset-h {
612			rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
613		};
614	};
615
616	pmic {
617		pmic_int_l: pmic-int-l {
618			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
619		};
620	};
621
622	usb2 {
623		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
624			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
625		};
626	};
627
628	sdio-pwrseq {
629		wifi_enable_h: wifi-enable-h {
630			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
631		};
632	};
633
634	vcc_sd {
635		vcc_sd_h: vcc-sd-h {
636			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
637		};
638	};
639};
640
641&pmu_io_domains {
642	pmuio1-supply = <&vcc3v3_pmu>;
643	pmuio2-supply = <&vcc3v3_pmu>;
644	vccio1-supply = <&vccio_acodec>;
645	vccio2-supply = <&vcc_1v8>;
646	vccio3-supply = <&vccio_sd>;
647	vccio4-supply = <&vcc_1v8>;
648	vccio5-supply = <&vcc_3v3>;
649	vccio6-supply = <&vcc1v8_dvp>;
650	vccio7-supply = <&vcc_3v3>;
651	status = "okay";
652};
653
654&sdhci {
655	bus-width = <8>;
656	mmc-hs200-1_8v;
657	non-removable;
658	vmmc-supply = <&vcc_3v3>;
659	vqmmc-supply = <&vcc_1v8>;
660	status = "okay";
661};
662
663&sdmmc0 {
664	bus-width = <4>;
665	cap-sd-highspeed;
666	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
667	disable-wp;
668	pinctrl-names = "default";
669	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
670	sd-uhs-sdr104;
671	vmmc-supply = <&vcc3v3_sd>;
672	vqmmc-supply = <&vccio_sd>;
673	status = "okay";
674};
675
676&sdmmc1 {
677	bus-width = <4>;
678	cap-sd-highspeed;
679	cap-sdio-irq;
680	keep-power-in-suspend;
681	mmc-pwrseq = <&sdio_pwrseq>;
682	non-removable;
683	pinctrl-names = "default";
684	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
685	sd-uhs-sdr104;
686	vmmc-supply = <&vcc_wl>;
687	vqmmc-supply = <&vcc_1v8>;
688	status = "okay";
689};
690
691&sfc {
692	pinctrl-0 = <&fspi_pins>;
693	pinctrl-names = "default";
694	#address-cells = <1>;
695	#size-cells = <0>;
696	status = "disabled";
697
698	flash@0 {
699		compatible = "jedec,spi-nor";
700		reg = <0>;
701		spi-max-frequency = <24000000>;
702		spi-rx-bus-width = <4>;
703		spi-tx-bus-width = <1>;
704	};
705};
706
707/* spdif is exposed on con40 pin 18 */
708&spdif {
709	status = "okay";
710};
711
712/* spi1 is exposed on con40
713 * pin 11 - spi1_mosi_m1
714 * pin 13 - spi1_miso_m1
715 * pin 15 - spi1_clk_m1
716 * pin 17 - spi1_cs0_m1
717 */
718&spi1 {
719	pinctrl-names = "default";
720	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
721};
722
723&tsadc {
724	/* tshut mode 0:CRU 1:GPIO */
725	rockchip,hw-tshut-mode = <1>;
726	/* tshut polarity 0:LOW 1:HIGH */
727	rockchip,hw-tshut-polarity = <0>;
728	status = "okay";
729};
730
731/* uart0 is exposed on con40
732 * pin 12 - uart0_tx
733 * pin 14 - uart0_rx
734 */
735&uart0 {
736	pinctrl-names = "default";
737	pinctrl-0 = <&uart0_xfer>;
738	status = "okay";
739};
740
741&uart1 {
742	pinctrl-names = "default";
743	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
744	status = "okay";
745	uart-has-rtscts;
746
747	bluetooth {
748		compatible = "brcm,bcm43438-bt";
749		clocks = <&rk817 1>;
750		clock-names = "lpo";
751		host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
752		device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
753		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
754		pinctrl-names = "default";
755		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
756		vbat-supply = <&vcc_sys>;
757		vddio-supply = <&vcca1v8_pmu>;
758		max-speed = <3000000>;
759	};
760};
761
762/* uart2 is exposed on con40
763 * pin 8 - uart2_tx_m0_debug
764 * pin 10 - uart2_rx_m0_debug
765 */
766&uart2 {
767	status = "okay";
768};
769
770&usb_host0_ehci {
771	status = "okay";
772};
773
774&usb_host0_ohci {
775	status = "okay";
776};
777
778&usb_host1_ehci {
779	status = "okay";
780};
781
782&usb_host1_ohci {
783	status = "okay";
784};
785
786&usb_host0_xhci {
787	dr_mode = "host";
788	status = "okay";
789};
790
791/* usb3 controller is muxed with sata1 */
792&usb_host1_xhci {
793	status = "okay";
794};
795
796&usb2phy0 {
797	status = "okay";
798};
799
800&usb2phy0_host {
801	phy-supply = <&vcc5v0_usb20_host>;
802	status = "okay";
803};
804
805&usb2phy0_otg {
806	phy-supply = <&vcc5v0_usb20_otg>;
807	status = "okay";
808};
809
810&usb2phy1 {
811	status = "okay";
812};
813
814&usb2phy1_host {
815	phy-supply = <&vcc5v0_usb20_host>;
816	status = "okay";
817};
818
819&usb2phy1_otg {
820	phy-supply = <&vcc5v0_usb20_host>;
821	status = "okay";
822};
823
824&vop {
825	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
826	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
827	status = "okay";
828};
829
830&vop_mmu {
831	status = "okay";
832};
833
834&vp0 {
835	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
836		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
837		remote-endpoint = <&hdmi_in_vp0>;
838	};
839};
840