1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2019~2020, 2022 NXP
4 */
5
6#include <dt-bindings/clock/imx8-clock.h>
7#include <dt-bindings/firmware/imx/rsrc.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/pinctrl/pads-imx8dxl.h>
12#include <dt-bindings/thermal/thermal.h>
13
14/ {
15	interrupt-parent = <&gic>;
16	#address-cells = <2>;
17	#size-cells = <2>;
18
19	aliases {
20		ethernet0 = &fec1;
21		ethernet1 = &eqos;
22		gpio0 = &lsio_gpio0;
23		gpio1 = &lsio_gpio1;
24		gpio2 = &lsio_gpio2;
25		gpio3 = &lsio_gpio3;
26		gpio4 = &lsio_gpio4;
27		gpio5 = &lsio_gpio5;
28		gpio6 = &lsio_gpio6;
29		gpio7 = &lsio_gpio7;
30		mu1 = &lsio_mu1;
31	};
32
33	cpus: cpus {
34		#address-cells = <2>;
35		#size-cells = <0>;
36
37		/* We have 1 clusters with 2 Cortex-A35 cores */
38		A35_0: cpu@0 {
39			device_type = "cpu";
40			compatible = "arm,cortex-a35";
41			reg = <0x0 0x0>;
42			enable-method = "psci";
43			next-level-cache = <&A35_L2>;
44			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
45			#cooling-cells = <2>;
46			operating-points-v2 = <&a35_opp_table>;
47		};
48
49		A35_1: cpu@1 {
50			device_type = "cpu";
51			compatible = "arm,cortex-a35";
52			reg = <0x0 0x1>;
53			enable-method = "psci";
54			next-level-cache = <&A35_L2>;
55			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
56			#cooling-cells = <2>;
57			operating-points-v2 = <&a35_opp_table>;
58		};
59
60		A35_L2: l2-cache0 {
61			compatible = "cache";
62		};
63	};
64
65	a35_opp_table: opp-table {
66		compatible = "operating-points-v2";
67		opp-shared;
68
69		opp-900000000 {
70			opp-hz = /bits/ 64 <900000000>;
71			opp-microvolt = <1000000>;
72			clock-latency-ns = <150000>;
73		};
74
75		opp-1200000000 {
76			opp-hz = /bits/ 64 <1200000000>;
77			opp-microvolt = <1100000>;
78			clock-latency-ns = <150000>;
79			opp-suspend;
80		};
81	};
82
83	gic: interrupt-controller@51a00000 {
84		compatible = "arm,gic-v3";
85		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
86		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
87		#interrupt-cells = <3>;
88		interrupt-controller;
89		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
90	};
91
92	reserved-memory {
93		#address-cells = <2>;
94		#size-cells = <2>;
95		ranges;
96
97		dsp_reserved: dsp@92400000 {
98			reg = <0 0x92400000 0 0x2000000>;
99			no-map;
100		};
101	};
102
103	pmu {
104		compatible = "arm,armv8-pmuv3";
105		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
106	};
107
108	psci {
109		compatible = "arm,psci-1.0";
110		method = "smc";
111	};
112
113	system-controller {
114		compatible = "fsl,imx-scu";
115		mbox-names = "tx0",
116			     "rx0",
117			     "gip3";
118		mboxes = <&lsio_mu1 0 0
119			  &lsio_mu1 1 0
120			  &lsio_mu1 3 3>;
121
122		pd: power-controller {
123			compatible = "fsl,scu-pd";
124			#power-domain-cells = <1>;
125			wakeup-irq = <160 163 235 236 237 228 229 230 231 238
126				     239 240 166 169>;
127		};
128
129		clk: clock-controller {
130			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
131			#clock-cells = <2>;
132			clocks = <&xtal32k &xtal24m>;
133			clock-names = "xtal_32KHz", "xtal_24Mhz";
134		};
135
136		iomuxc: pinctrl {
137			compatible = "fsl,imx8dxl-iomuxc";
138		};
139
140		ocotp: ocotp {
141			compatible = "fsl,imx8qxp-scu-ocotp";
142			#address-cells = <1>;
143			#size-cells = <1>;
144
145			fec_mac0: mac@2c4 {
146				reg = <0x2c4 6>;
147			};
148
149			fec_mac1: mac@2c6 {
150				reg = <0x2c6 6>;
151			};
152		};
153
154		rtc: rtc {
155			compatible = "fsl,imx8qxp-sc-rtc";
156		};
157
158		sc_pwrkey: keys {
159			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
160			linux,keycode = <KEY_POWER>;
161			wakeup-source;
162		};
163
164		watchdog {
165			compatible = "fsl,imx-sc-wdt";
166			timeout-sec = <60>;
167		};
168
169		tsens: thermal-sensor {
170			compatible = "fsl,imx-sc-thermal";
171			#thermal-sensor-cells = <1>;
172		};
173	};
174
175	timer {
176		compatible = "arm,armv8-timer";
177		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
178			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
179			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
180			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
181	};
182
183	thermal_zones: thermal-zones {
184		cpu-thermal0 {
185			polling-delay-passive = <250>;
186			polling-delay = <2000>;
187			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
188
189			trips {
190				cpu_alert0: trip0 {
191					temperature = <107000>;
192					hysteresis = <2000>;
193					type = "passive";
194				};
195				cpu_crit0: trip1 {
196					temperature = <127000>;
197					hysteresis = <2000>;
198					type = "critical";
199				};
200			};
201
202			cooling-maps {
203				map0 {
204					trip = <&cpu_alert0>;
205					cooling-device =
206					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
207					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
208				};
209			};
210		};
211	};
212
213	/* The two values below cannot be changed by the board */
214	xtal32k: clock-xtal32k {
215		compatible = "fixed-clock";
216		#clock-cells = <0>;
217		clock-frequency = <32768>;
218		clock-output-names = "xtal_32KHz";
219	};
220
221	xtal24m: clock-xtal24m {
222		compatible = "fixed-clock";
223		#clock-cells = <0>;
224		clock-frequency = <24000000>;
225		clock-output-names = "xtal_24MHz";
226	};
227
228	/* sorted in register address */
229	#include "imx8-ss-adma.dtsi"
230	#include "imx8-ss-conn.dtsi"
231	#include "imx8-ss-ddr.dtsi"
232	#include "imx8-ss-lsio.dtsi"
233};
234
235#include "imx8dxl-ss-adma.dtsi"
236#include "imx8dxl-ss-conn.dtsi"
237#include "imx8dxl-ss-lsio.dtsi"
238#include "imx8dxl-ss-ddr.dtsi"
239