1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Copyright (c) 2008 Simtec Electronics
4 //	Ben Dooks <ben@simtec.co.uk>
5 //	http://armlinux.simtec.co.uk/
6 //
7 // S3C series CPU initialisation
8 
9 /*
10  * NOTE: Code in this file is not used on S3C64xx when booting with
11  * Device Tree support.
12  */
13 
14 #include <linux/init.h>
15 #include <linux/module.h>
16 #include <linux/interrupt.h>
17 #include <linux/ioport.h>
18 #include <linux/serial_core.h>
19 #include <linux/serial_s3c.h>
20 #include <linux/platform_device.h>
21 #include <linux/of.h>
22 
23 #include <asm/mach/arch.h>
24 #include <asm/mach/map.h>
25 
26 #include "cpu.h"
27 #include "devs.h"
28 
29 static struct cpu_table *cpu;
30 
s3c_lookup_cpu(unsigned long idcode,struct cpu_table * tab,unsigned int count)31 static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
32 						struct cpu_table *tab,
33 						unsigned int count)
34 {
35 	for (; count != 0; count--, tab++) {
36 		if ((idcode & tab->idmask) == (tab->idcode & tab->idmask))
37 			return tab;
38 	}
39 
40 	return NULL;
41 }
42 
s3c_init_cpu(unsigned long idcode,struct cpu_table * cputab,unsigned int cputab_size)43 void __init s3c_init_cpu(unsigned long idcode,
44 			 struct cpu_table *cputab, unsigned int cputab_size)
45 {
46 	cpu = s3c_lookup_cpu(idcode, cputab, cputab_size);
47 
48 	if (cpu == NULL) {
49 		printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
50 		panic("Unknown S3C24XX CPU");
51 	}
52 
53 	printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
54 
55 	if (cpu->init == NULL) {
56 		printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
57 		panic("Unsupported Samsung CPU");
58 	}
59 
60 	if (cpu->map_io)
61 		cpu->map_io();
62 
63 	pr_err("The platform is deprecated and scheduled for removal. Please reach to the maintainers of the platform and linux-samsung-soc@vger.kernel.org if you still use it.  Without such feedback, the platform will be removed after 2022.\n");
64 }
65 
66 /* s3c24xx_init_clocks
67  *
68  * Initialise the clock subsystem and associated information from the
69  * given master crystal value.
70  *
71  * xtal  = 0 -> use default PLL crystal value (normally 12MHz)
72  *      != 0 -> PLL crystal value in Hz
73 */
74 
s3c24xx_init_clocks(int xtal)75 void __init s3c24xx_init_clocks(int xtal)
76 {
77 	if (xtal == 0)
78 		xtal = 12*1000*1000;
79 
80 	if (cpu == NULL)
81 		panic("s3c24xx_init_clocks: no cpu setup?\n");
82 
83 	if (cpu->init_clocks == NULL)
84 		panic("s3c24xx_init_clocks: cpu has no clock init\n");
85 	else
86 		(cpu->init_clocks)(xtal);
87 }
88 
89 /* uart management */
90 #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
91 static int nr_uarts __initdata = 0;
92 
93 #ifdef CONFIG_SERIAL_SAMSUNG_UARTS
94 static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
95 #endif
96 
97 /* s3c24xx_init_uartdevs
98  *
99  * copy the specified platform data and configuration into our central
100  * set of devices, before the data is thrown away after the init process.
101  *
102  * This also fills in the array passed to the serial driver for the
103  * early initialisation of the console.
104 */
105 
s3c24xx_init_uartdevs(char * name,struct s3c24xx_uart_resources * res,struct s3c2410_uartcfg * cfg,int no)106 void __init s3c24xx_init_uartdevs(char *name,
107 				  struct s3c24xx_uart_resources *res,
108 				  struct s3c2410_uartcfg *cfg, int no)
109 {
110 #ifdef CONFIG_SERIAL_SAMSUNG_UARTS
111 	struct platform_device *platdev;
112 	struct s3c2410_uartcfg *cfgptr = uart_cfgs;
113 	struct s3c24xx_uart_resources *resp;
114 	int uart;
115 
116 	memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no);
117 
118 	for (uart = 0; uart < no; uart++, cfg++, cfgptr++) {
119 		platdev = s3c24xx_uart_src[cfgptr->hwport];
120 
121 		resp = res + cfgptr->hwport;
122 
123 		s3c24xx_uart_devs[uart] = platdev;
124 
125 		platdev->name = name;
126 		platdev->resource = resp->resources;
127 		platdev->num_resources = resp->nr_resources;
128 
129 		platdev->dev.platform_data = cfgptr;
130 	}
131 
132 	nr_uarts = no;
133 #endif
134 }
135 
s3c24xx_init_uarts(struct s3c2410_uartcfg * cfg,int no)136 void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
137 {
138 	if (cpu == NULL)
139 		return;
140 
141 	if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) {
142 		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
143 	} else
144 		(cpu->init_uarts)(cfg, no);
145 }
146 #endif
147 
s3c_arch_init(void)148 static int __init s3c_arch_init(void)
149 {
150 	int ret;
151 
152 	/* init is only needed for ATAGS based platforms */
153 	if (!IS_ENABLED(CONFIG_ATAGS) ||
154 	    (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
155 		return 0;
156 
157 	// do the correct init for cpu
158 
159 	if (cpu == NULL) {
160 		/* Not needed when booting with device tree. */
161 		if (of_have_populated_dt())
162 			return 0;
163 		panic("s3c_arch_init: NULL cpu\n");
164 	}
165 
166 	ret = (cpu->init)();
167 	if (ret != 0)
168 		return ret;
169 #if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
170 	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
171 #endif
172 	return ret;
173 }
174 
175 arch_initcall(s3c_arch_init);
176