1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Broadcom STB CPU SMP and hotplug support for ARM
4  *
5  * Copyright (C) 2013-2014 Broadcom Corporation
6  */
7 
8 #include <linux/delay.h>
9 #include <linux/errno.h>
10 #include <linux/init.h>
11 #include <linux/io.h>
12 #include <linux/jiffies.h>
13 #include <linux/of_address.h>
14 #include <linux/of_platform.h>
15 #include <linux/printk.h>
16 #include <linux/regmap.h>
17 #include <linux/smp.h>
18 #include <linux/mfd/syscon.h>
19 
20 #include <asm/cacheflush.h>
21 #include <asm/cp15.h>
22 #include <asm/mach-types.h>
23 #include <asm/smp_plat.h>
24 
25 enum {
26 	ZONE_MAN_CLKEN_MASK		= BIT(0),
27 	ZONE_MAN_RESET_CNTL_MASK	= BIT(1),
28 	ZONE_MAN_MEM_PWR_MASK		= BIT(4),
29 	ZONE_RESERVED_1_MASK		= BIT(5),
30 	ZONE_MAN_ISO_CNTL_MASK		= BIT(6),
31 	ZONE_MANUAL_CONTROL_MASK	= BIT(7),
32 	ZONE_PWR_DN_REQ_MASK		= BIT(9),
33 	ZONE_PWR_UP_REQ_MASK		= BIT(10),
34 	ZONE_BLK_RST_ASSERT_MASK	= BIT(12),
35 	ZONE_PWR_OFF_STATE_MASK		= BIT(25),
36 	ZONE_PWR_ON_STATE_MASK		= BIT(26),
37 	ZONE_DPG_PWR_STATE_MASK		= BIT(28),
38 	ZONE_MEM_PWR_STATE_MASK		= BIT(29),
39 	ZONE_RESET_STATE_MASK		= BIT(31),
40 	CPU0_PWR_ZONE_CTRL_REG		= 1,
41 	CPU_RESET_CONFIG_REG		= 2,
42 };
43 
44 static void __iomem *cpubiuctrl_block;
45 static void __iomem *hif_cont_block;
46 static u32 cpu0_pwr_zone_ctrl_reg;
47 static u32 cpu_rst_cfg_reg;
48 static u32 hif_cont_reg;
49 
50 #ifdef CONFIG_HOTPLUG_CPU
51 /*
52  * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
53  * one or more cache may be disabled, we must flush to ensure coherency. We
54  * cannot use traditional completion structures or spinlocks as they rely on
55  * coherency.
56  */
57 static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
58 
per_cpu_sw_state_rd(u32 cpu)59 static int per_cpu_sw_state_rd(u32 cpu)
60 {
61 	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
62 	return per_cpu(per_cpu_sw_state, cpu);
63 }
64 
per_cpu_sw_state_wr(u32 cpu,int val)65 static void per_cpu_sw_state_wr(u32 cpu, int val)
66 {
67 	dmb();
68 	per_cpu(per_cpu_sw_state, cpu) = val;
69 	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
70 }
71 #else
per_cpu_sw_state_wr(u32 cpu,int val)72 static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
73 #endif
74 
pwr_ctrl_get_base(u32 cpu)75 static void __iomem *pwr_ctrl_get_base(u32 cpu)
76 {
77 	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
78 	base += (cpu_logical_map(cpu) * 4);
79 	return base;
80 }
81 
pwr_ctrl_rd(u32 cpu)82 static u32 pwr_ctrl_rd(u32 cpu)
83 {
84 	void __iomem *base = pwr_ctrl_get_base(cpu);
85 	return readl_relaxed(base);
86 }
87 
pwr_ctrl_set(unsigned int cpu,u32 val,u32 mask)88 static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask)
89 {
90 	void __iomem *base = pwr_ctrl_get_base(cpu);
91 	writel((readl(base) & mask) | val, base);
92 }
93 
pwr_ctrl_clr(unsigned int cpu,u32 val,u32 mask)94 static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask)
95 {
96 	void __iomem *base = pwr_ctrl_get_base(cpu);
97 	writel((readl(base) & mask) & ~val, base);
98 }
99 
100 #define POLL_TMOUT_MS 500
pwr_ctrl_wait_tmout(unsigned int cpu,u32 set,u32 mask)101 static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask)
102 {
103 	const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS);
104 	u32 tmp;
105 
106 	do {
107 		tmp = pwr_ctrl_rd(cpu) & mask;
108 		if (!set == !tmp)
109 			return 0;
110 	} while (time_before(jiffies, timeo));
111 
112 	tmp = pwr_ctrl_rd(cpu) & mask;
113 	if (!set == !tmp)
114 		return 0;
115 
116 	return -ETIMEDOUT;
117 }
118 
cpu_rst_cfg_set(u32 cpu,int set)119 static void cpu_rst_cfg_set(u32 cpu, int set)
120 {
121 	u32 val;
122 	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
123 	if (set)
124 		val |= BIT(cpu_logical_map(cpu));
125 	else
126 		val &= ~BIT(cpu_logical_map(cpu));
127 	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
128 }
129 
cpu_set_boot_addr(u32 cpu,unsigned long boot_addr)130 static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
131 {
132 	const int reg_ofs = cpu_logical_map(cpu) * 8;
133 	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
134 	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
135 }
136 
brcmstb_cpu_boot(u32 cpu)137 static void brcmstb_cpu_boot(u32 cpu)
138 {
139 	/* Mark this CPU as "up" */
140 	per_cpu_sw_state_wr(cpu, 1);
141 
142 	/*
143 	 * Set the reset vector to point to the secondary_startup
144 	 * routine
145 	 */
146 	cpu_set_boot_addr(cpu, __pa_symbol(secondary_startup));
147 
148 	/* Unhalt the cpu */
149 	cpu_rst_cfg_set(cpu, 0);
150 }
151 
brcmstb_cpu_power_on(u32 cpu)152 static void brcmstb_cpu_power_on(u32 cpu)
153 {
154 	/*
155 	 * The secondary cores power was cut, so we must go through
156 	 * power-on initialization.
157 	 */
158 	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00);
159 	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
160 	pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1);
161 
162 	pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
163 
164 	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK))
165 		panic("ZONE_MEM_PWR_STATE_MASK set timeout");
166 
167 	pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1);
168 
169 	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK))
170 		panic("ZONE_DPG_PWR_STATE_MASK set timeout");
171 
172 	pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
173 	pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
174 }
175 
brcmstb_cpu_get_power_state(u32 cpu)176 static int brcmstb_cpu_get_power_state(u32 cpu)
177 {
178 	int tmp = pwr_ctrl_rd(cpu);
179 	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
180 }
181 
182 #ifdef CONFIG_HOTPLUG_CPU
183 
brcmstb_cpu_die(u32 cpu)184 static void brcmstb_cpu_die(u32 cpu)
185 {
186 	v7_exit_coherency_flush(all);
187 
188 	per_cpu_sw_state_wr(cpu, 0);
189 
190 	/* Sit and wait to die */
191 	wfi();
192 
193 	/* We should never get here... */
194 	while (1)
195 		;
196 }
197 
brcmstb_cpu_kill(u32 cpu)198 static int brcmstb_cpu_kill(u32 cpu)
199 {
200 	/*
201 	 * Ordinarily, the hardware forbids power-down of CPU0 (which is good
202 	 * because it is the boot CPU), but this is not true when using BPCM
203 	 * manual mode.  Consequently, we must avoid turning off CPU0 here to
204 	 * ensure that TI2C master reset will work.
205 	 */
206 	if (cpu == 0) {
207 		pr_warn("SMP: refusing to power off CPU0\n");
208 		return 1;
209 	}
210 
211 	while (per_cpu_sw_state_rd(cpu))
212 		;
213 
214 	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
215 	pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
216 	pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1);
217 	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
218 	pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
219 
220 	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK))
221 		panic("ZONE_MEM_PWR_STATE_MASK clear timeout");
222 
223 	pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1);
224 
225 	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK))
226 		panic("ZONE_DPG_PWR_STATE_MASK clear timeout");
227 
228 	/* Flush pipeline before resetting CPU */
229 	mb();
230 
231 	/* Assert reset on the CPU */
232 	cpu_rst_cfg_set(cpu, 1);
233 
234 	return 1;
235 }
236 
237 #endif /* CONFIG_HOTPLUG_CPU */
238 
setup_hifcpubiuctrl_regs(struct device_node * np)239 static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
240 {
241 	int rc = 0;
242 	char *name;
243 	struct device_node *syscon_np = NULL;
244 
245 	name = "syscon-cpu";
246 
247 	syscon_np = of_parse_phandle(np, name, 0);
248 	if (!syscon_np) {
249 		pr_err("can't find phandle %s\n", name);
250 		rc = -EINVAL;
251 		goto cleanup;
252 	}
253 
254 	cpubiuctrl_block = of_iomap(syscon_np, 0);
255 	if (!cpubiuctrl_block) {
256 		pr_err("iomap failed for cpubiuctrl_block\n");
257 		rc = -EINVAL;
258 		goto cleanup;
259 	}
260 
261 	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
262 					&cpu0_pwr_zone_ctrl_reg);
263 	if (rc) {
264 		pr_err("failed to read 1st entry from %s property (%d)\n", name,
265 			rc);
266 		rc = -EINVAL;
267 		goto cleanup;
268 	}
269 
270 	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
271 					&cpu_rst_cfg_reg);
272 	if (rc) {
273 		pr_err("failed to read 2nd entry from %s property (%d)\n", name,
274 			rc);
275 		rc = -EINVAL;
276 		goto cleanup;
277 	}
278 
279 cleanup:
280 	of_node_put(syscon_np);
281 	return rc;
282 }
283 
setup_hifcont_regs(struct device_node * np)284 static int __init setup_hifcont_regs(struct device_node *np)
285 {
286 	int rc = 0;
287 	char *name;
288 	struct device_node *syscon_np = NULL;
289 
290 	name = "syscon-cont";
291 
292 	syscon_np = of_parse_phandle(np, name, 0);
293 	if (!syscon_np) {
294 		pr_err("can't find phandle %s\n", name);
295 		rc = -EINVAL;
296 		goto cleanup;
297 	}
298 
299 	hif_cont_block = of_iomap(syscon_np, 0);
300 	if (!hif_cont_block) {
301 		pr_err("iomap failed for hif_cont_block\n");
302 		rc = -EINVAL;
303 		goto cleanup;
304 	}
305 
306 	/* Offset is at top of hif_cont_block */
307 	hif_cont_reg = 0;
308 
309 cleanup:
310 	of_node_put(syscon_np);
311 	return rc;
312 }
313 
brcmstb_cpu_ctrl_setup(unsigned int max_cpus)314 static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
315 {
316 	int rc;
317 	struct device_node *np;
318 	char *name;
319 
320 	name = "brcm,brcmstb-smpboot";
321 	np = of_find_compatible_node(NULL, NULL, name);
322 	if (!np) {
323 		pr_err("can't find compatible node %s\n", name);
324 		return;
325 	}
326 
327 	rc = setup_hifcpubiuctrl_regs(np);
328 	if (rc)
329 		goto out_put_node;
330 
331 	rc = setup_hifcont_regs(np);
332 	if (rc)
333 		goto out_put_node;
334 
335 out_put_node:
336 	of_node_put(np);
337 }
338 
brcmstb_boot_secondary(unsigned int cpu,struct task_struct * idle)339 static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
340 {
341 	/* Missing the brcm,brcmstb-smpboot DT node? */
342 	if (!cpubiuctrl_block || !hif_cont_block)
343 		return -ENODEV;
344 
345 	/* Bring up power to the core if necessary */
346 	if (brcmstb_cpu_get_power_state(cpu) == 0)
347 		brcmstb_cpu_power_on(cpu);
348 
349 	brcmstb_cpu_boot(cpu);
350 
351 	return 0;
352 }
353 
354 static const struct smp_operations brcmstb_smp_ops __initconst = {
355 	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
356 	.smp_boot_secondary	= brcmstb_boot_secondary,
357 #ifdef CONFIG_HOTPLUG_CPU
358 	.cpu_kill		= brcmstb_cpu_kill,
359 	.cpu_die		= brcmstb_cpu_die,
360 #endif
361 };
362 
363 CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);
364