1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Support for CompuLab CM-T3730
4 */
5/dts-v1/;
6
7#include "omap36xx.dtsi"
8#include "omap3-cm-t3x30.dtsi"
9
10/ {
11	model = "CompuLab CM-T3730";
12	compatible = "compulab,omap3-cm-t3730", "ti,omap3630", "ti,omap36xx", "ti,omap3";
13
14	wl12xx_vmmc2: wl12xx_vmmc2 {
15		compatible = "regulator-fixed";
16		regulator-name = "vw1271";
17		pinctrl-names = "default";
18		pinctrl-0 = <&wl12xx_gpio>;
19		regulator-min-microvolt = <1800000>;
20		regulator-max-microvolt = <1800000>;
21		gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;   /* gpio73 */
22		startup-delay-us = <20000>;
23		enable-active-high;
24	};
25
26	wl12xx_vaux2: wl12xx_vaux2 {
27		compatible = "regulator-fixed";
28		regulator-name = "vwl1271_vaux2";
29		regulator-min-microvolt = <1800000>;
30		regulator-max-microvolt = <1800000>;
31		vin-supply = <&vaux2>;
32	};
33};
34
35&omap3_pmx_wkup {
36	dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
37		pinctrl-single,pins = <
38			OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3)   /* sys_boot0.dss_data18 */
39			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3)   /* sys_boot1.dss_data19 */
40			OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3)   /* sys_boot3.dss_data20 */
41			OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3)   /* sys_boot4.dss_data21 */
42			OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3)   /* sys_boot5.dss_data22 */
43			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3)   /* sys_boot6.dss_data23 */
44		>;
45	};
46};
47
48&omap3_pmx_core {
49
50	mmc2_pins: pinmux_mmc2_pins {
51		pinctrl-single,pins = <
52			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
53			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
54			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat0.sdmmc2_dat0 */
55			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
56			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
57			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
58		>;
59	};
60
61	wl12xx_gpio: pinmux_wl12xx_gpio {
62		pinctrl-single,pins = <
63			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)	/* dss_data3.gpio_73 */
64			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4)	/* sdmmc2_dat4.gpio_136 */
65		>;
66	};
67};
68
69&mmc2 {
70	pinctrl-names = "default";
71	pinctrl-0 = <&mmc2_pins>;
72	vmmc-supply = <&wl12xx_vmmc2>;
73	vqmmc-supply = <&wl12xx_vaux2>;
74	non-removable;
75	bus-width = <4>;
76	cap-power-off-card;
77
78	#address-cells = <1>;
79	#size-cells = <0>;
80	wlcore: wlcore@2 {
81		compatible = "ti,wl1271";
82		reg = <2>;
83		interrupt-parent = <&gpio5>;
84		interrupts = <8 IRQ_TYPE_EDGE_RISING>; /* gpio 136 */
85		ref-clock-frequency = <38400000>;
86	};
87};
88
89&dss {
90	status = "okay";
91
92	pinctrl-names = "default";
93	pinctrl-0 = <
94		&dss_dpi_pins_common
95		&dss_dpi_pins_cm_t3730
96	>;
97};
98
99