1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright 2013 Freescale Semiconductor, Inc.
4 *
5 * Author: Fabio Estevam <fabio.estevam@freescale.com>
6 */
7
8#include <dt-bindings/gpio/gpio.h>
9
10/ {
11	chosen {
12		stdout-path = &uart1;
13	};
14
15	sound {
16		compatible = "fsl,imx6-wandboard-sgtl5000",
17			     "fsl,imx-audio-sgtl5000";
18		model = "imx6-wandboard-sgtl5000";
19		ssi-controller = <&ssi1>;
20		audio-codec = <&codec>;
21		audio-routing =
22			"MIC_IN", "Mic Jack",
23			"Mic Jack", "Mic Bias",
24			"Headphone Jack", "HP_OUT";
25		mux-int-port = <1>;
26		mux-ext-port = <3>;
27	};
28
29	sound-spdif {
30		compatible = "fsl,imx-audio-spdif";
31		model = "imx-spdif";
32		spdif-controller = <&spdif>;
33		spdif-out;
34	};
35
36	reg_1p5v: regulator-1p5v {
37		compatible = "regulator-fixed";
38		regulator-name = "1P5V";
39		regulator-min-microvolt = <1500000>;
40		regulator-max-microvolt = <1500000>;
41		regulator-always-on;
42	};
43
44	reg_1p8v: regulator-1p8v {
45		compatible = "regulator-fixed";
46		regulator-name = "1P8V";
47		regulator-min-microvolt = <1800000>;
48		regulator-max-microvolt = <1800000>;
49		regulator-always-on;
50	};
51
52	reg_2p8v: regulator-2p8v {
53		compatible = "regulator-fixed";
54		regulator-name = "2P8V";
55		regulator-min-microvolt = <2800000>;
56		regulator-max-microvolt = <2800000>;
57		regulator-always-on;
58	};
59
60	reg_2p5v: regulator-2p5v {
61		compatible = "regulator-fixed";
62		regulator-name = "2P5V";
63		regulator-min-microvolt = <2500000>;
64		regulator-max-microvolt = <2500000>;
65		regulator-always-on;
66	};
67
68	reg_3p3v: regulator-3p3v {
69		compatible = "regulator-fixed";
70		regulator-name = "3P3V";
71		regulator-min-microvolt = <3300000>;
72		regulator-max-microvolt = <3300000>;
73		regulator-always-on;
74	};
75
76	reg_usb_otg_vbus: regulator-usbotgvbus {
77		compatible = "regulator-fixed";
78		regulator-name = "usb_otg_vbus";
79		regulator-min-microvolt = <5000000>;
80		regulator-max-microvolt = <5000000>;
81		pinctrl-names = "default";
82		pinctrl-0 = <&pinctrl_usbotgvbus>;
83		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
84	};
85};
86
87&audmux {
88	pinctrl-names = "default";
89	pinctrl-0 = <&pinctrl_audmux>;
90	status = "okay";
91};
92
93&hdmi {
94	ddc-i2c-bus = <&i2c1>;
95	status = "okay";
96};
97
98&i2c1 {
99	clock-frequency = <100000>;
100	pinctrl-names = "default", "gpio";
101	pinctrl-0 = <&pinctrl_i2c1>;
102	pinctrl-1 = <&pinctrl_i2c1_gpio>;
103	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
104	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
105	status = "okay";
106};
107
108&i2c2 {
109	clock-frequency = <100000>;
110	pinctrl-names = "default", "gpio";
111	pinctrl-0 = <&pinctrl_i2c2>;
112	pinctrl-1 = <&pinctrl_i2c2_gpio>;
113	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
114	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
115	status = "okay";
116
117	codec: sgtl5000@a {
118		pinctrl-names = "default";
119		pinctrl-0 = <&pinctrl_mclk>;
120		compatible = "fsl,sgtl5000";
121		reg = <0x0a>;
122		clocks = <&clks IMX6QDL_CLK_CKO>;
123		VDDA-supply = <&reg_2p5v>;
124		VDDIO-supply = <&reg_3p3v>;
125		lrclk-strength = <3>;
126	};
127
128	camera@3c {
129		compatible = "ovti,ov5645";
130		pinctrl-names = "default";
131		pinctrl-0 = <&pinctrl_ov5645>;
132		reg = <0x3c>;
133		clocks = <&clks IMX6QDL_CLK_CKO2>;
134		clock-names = "xclk";
135		clock-frequency = <24000000>;
136		vdddo-supply = <&reg_1p8v>;
137		vdda-supply = <&reg_2p8v>;
138		vddd-supply = <&reg_1p5v>;
139		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
140		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
141
142		port {
143			ov5645_to_mipi_csi2: endpoint {
144				remote-endpoint = <&mipi_csi2_in>;
145				clock-lanes = <0>;
146				data-lanes = <1 2>;
147			};
148		};
149	};
150};
151
152&iomuxc {
153	pinctrl-names = "default";
154
155	imx6qdl-wandboard {
156
157		pinctrl_audmux: audmuxgrp {
158			fsl,pins = <
159				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
160				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
161				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
162				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
163			>;
164		};
165
166		pinctrl_enet: enetgrp {
167			fsl,pins = <
168				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
169				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
170				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
171				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
172				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
173				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
174				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
175				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
176				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
177				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
178				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
179				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
180				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
181				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
182				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
183				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
184			>;
185		};
186
187		pinctrl_i2c1: i2c1grp {
188			fsl,pins = <
189				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
190				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
191			>;
192		};
193
194		pinctrl_i2c1_gpio: i2c1gpiogrp {
195			fsl,pins = <
196				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b0
197				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b0
198			>;
199		};
200
201		pinctrl_i2c2: i2c2grp {
202			fsl,pins = <
203				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
204				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
205			>;
206		};
207
208		pinctrl_i2c2_gpio: i2c2gpiogrp {
209			fsl,pins = <
210				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b0
211				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b0
212			>;
213		};
214
215		pinctrl_mclk: mclkgrp {
216			fsl,pins = <
217				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
218			>;
219		};
220
221		pinctrl_ov5645: ov5645grp {
222			fsl,pins = <
223				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
224				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
225				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
226			>;
227		};
228
229		pinctrl_spdif: spdifgrp {
230			fsl,pins = <
231				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
232			>;
233		};
234
235		pinctrl_uart1: uart1grp {
236			fsl,pins = <
237				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
238				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
239			>;
240		};
241
242		pinctrl_uart3: uart3grp {
243			fsl,pins = <
244				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
245				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
246				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
247				MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
248			>;
249		};
250
251		pinctrl_usbotg: usbotggrp {
252			fsl,pins = <
253				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
254			>;
255		};
256
257		pinctrl_usbotgvbus: usbotgvbusgrp {
258			fsl,pins = <
259				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
260			>;
261		};
262
263		pinctrl_usdhc1: usdhc1grp {
264			fsl,pins = <
265				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
266				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
267				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
268				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
269				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
270				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
271			>;
272		};
273
274		pinctrl_usdhc2: usdhc2grp {
275			fsl,pins = <
276				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
277				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
278				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
279				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
280				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
281				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
282			>;
283		};
284
285		pinctrl_usdhc3: usdhc3grp {
286			fsl,pins = <
287				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
288				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
289				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
290				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
291				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
292				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
293			>;
294		};
295	};
296};
297
298&fec {
299	pinctrl-names = "default";
300	pinctrl-0 = <&pinctrl_enet>;
301	phy-mode = "rgmii-id";
302	phy-handle = <&ethphy>;
303	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
304	status = "okay";
305
306	mdio {
307		#address-cells = <1>;
308		#size-cells = <0>;
309
310		ethphy: ethernet-phy@1 {
311			reg = <1>;
312			qca,clk-out-frequency = <125000000>;
313		};
314	};
315};
316
317&mipi_csi {
318	status = "okay";
319
320	port@0 {
321		reg = <0>;
322
323		mipi_csi2_in: endpoint {
324			remote-endpoint = <&ov5645_to_mipi_csi2>;
325			clock-lanes = <0>;
326			data-lanes = <1 2>;
327		};
328	};
329};
330
331&spdif {
332	pinctrl-names = "default";
333	pinctrl-0 = <&pinctrl_spdif>;
334	status = "okay";
335};
336
337&ssi1 {
338	status = "okay";
339};
340
341&uart1 {
342	pinctrl-names = "default";
343	pinctrl-0 = <&pinctrl_uart1>;
344	status = "okay";
345};
346
347&uart3 {
348	pinctrl-names = "default";
349	pinctrl-0 = <&pinctrl_uart3>;
350	uart-has-rtscts;
351	status = "okay";
352};
353
354&usbh1 {
355	status = "okay";
356};
357
358&usbotg {
359	vbus-supply = <&reg_usb_otg_vbus>;
360	pinctrl-names = "default";
361	pinctrl-0 = <&pinctrl_usbotg>;
362	disable-over-current;
363	dr_mode = "otg";
364	status = "okay";
365};
366
367&usdhc1 {
368	pinctrl-names = "default";
369	pinctrl-0 = <&pinctrl_usdhc1>;
370	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
371	status = "okay";
372};
373
374&usdhc3 {
375	pinctrl-names = "default";
376	pinctrl-0 = <&pinctrl_usdhc3>;
377	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
378	status = "okay";
379};
380