1Amlogic SD / eMMC controller for S905/GXBB family SoCs
2
3The MMC 5.1 compliant host controller on Amlogic provides the
4interface for SD, eMMC and SDIO devices.
5
6This file documents the properties in addition to those available in
7the MMC core bindings, documented by mmc.txt.
8
9Required properties:
10- compatible : contains one of:
11  - "amlogic,meson-gx-mmc"
12  - "amlogic,meson-gxbb-mmc"
13  - "amlogic,meson-gxl-mmc"
14  - "amlogic,meson-gxm-mmc"
15  - "amlogic,meson-axg-mmc"
16- clocks     : A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
17- clock-names: Should contain the following:
18	"core" - Main peripheral bus clock
19	"clkin0" - Parent clock of internal mux
20	"clkin1" - Other parent clock of internal mux
21  The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
22  clock rate requested by the MMC core.
23- resets     : phandle of the internal reset line
24
25Optional properties:
26- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the
27  DRAM memory, like on the G12A dedicated SDIO controller.
28
29Example:
30
31	sd_emmc_a: mmc@70000 {
32		compatible = "amlogic,meson-gxbb-mmc";
33		reg = <0x0 0x70000 0x0 0x2000>;
34		interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
35		clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>;
36		clock-names = "core", "clkin0", "clkin1";
37		pinctrl-0 = <&emmc_pins>;
38		resets = <&reset RESET_SD_EMMC_A>;
39	};
40