1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: ST-Ericsson DMA40 DMA Engine
8
9maintainers:
10  - Linus Walleij <linus.walleij@linaro.org>
11
12allOf:
13  - $ref: "dma-controller.yaml#"
14
15properties:
16  "#dma-cells":
17    const: 3
18    description: |
19      The first cell is the unique device channel number as indicated by this
20      table for DB8500 which is the only ASIC known to use DMA40:
21
22      0:  SPI controller 0
23      1:  SD/MMC controller 0 (unused)
24      2:  SD/MMC controller 1 (unused)
25      3:  SD/MMC controller 2 (unused)
26      4:  I2C port 1
27      5:  I2C port 3
28      6:  I2C port 2
29      7:  I2C port 4
30      8:  Synchronous Serial Port SSP0
31      9:  Synchronous Serial Port SSP1
32      10: Multi-Channel Display Engine MCDE RX
33      11: UART port 2
34      12: UART port 1
35      13: UART port 0
36      14: Multirate Serial Port MSP2
37      15: I2C port 0
38      16: USB OTG in/out endpoints 7 & 15
39      17: USB OTG in/out endpoints 6 & 14
40      18: USB OTG in/out endpoints 5 & 13
41      19: USB OTG in/out endpoints 4 & 12
42      20: SLIMbus or HSI channel 0
43      21: SLIMbus or HSI channel 1
44      22: SLIMbus or HSI channel 2
45      23: SLIMbus or HSI channel 3
46      24: Multimedia DSP SXA0
47      25: Multimedia DSP SXA1
48      26: Multimedia DSP SXA2
49      27: Multimedia DSP SXA3
50      28: SD/MMC controller 2
51      29: SD/MMC controller 0
52      30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
53      31: MSP port 0 or SLIMbus channel 0
54      32: SD/MMC controller 1
55      33: SPI controller 2
56      34: i2c3 RX2 TX2
57      35: SPI controller 1
58      36: USB OTG in/out endpoints 3 & 11
59      37: USB OTG in/out endpoints 2 & 10
60      38: USB OTG in/out endpoints 1 & 9
61      39: USB OTG in/out endpoints 8
62      40: SPI controller 3
63      41: SD/MMC controller 3
64      42: SD/MMC controller 4
65      43: SD/MMC controller 5
66      44: Multimedia DSP SXA4
67      45: Multimedia DSP SXA5
68      46: SLIMbus channel 8 or Multimedia DSP SXA6
69      47: SLIMbus channel 9 or Multimedia DSP SXA7
70      48: Crypto Accelerator 1
71      49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
72      50: Hash Accelerator 1 TX
73      51: memcpy TX (to be used by the DMA driver for memcpy operations)
74      52: SLIMbus or HSI channel 4
75      53: SLIMbus or HSI channel 5
76      54: SLIMbus or HSI channel 6
77      55: SLIMbus or HSI channel 7
78      56: memcpy (to be used by the DMA driver for memcpy operations)
79      57: memcpy (to be used by the DMA driver for memcpy operations)
80      58: memcpy (to be used by the DMA driver for memcpy operations)
81      59: memcpy (to be used by the DMA driver for memcpy operations)
82      60: memcpy (to be used by the DMA driver for memcpy operations)
83      61: Crypto Accelerator 0
84      62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
85      63: Hash Accelerator 0 TX
86
87      The second cell is the DMA request line number. This is only used when
88      a fixed channel is allocated, and indicated by setting bit 3 in the
89      flags field (see below).
90
91      The third cell is a 32bit flags bitfield with the following possible
92      bits set:
93      0x00000001 (bit 0) - mode:
94        Logical channel when unset
95        Physical channel when set
96      0x00000002 (bit 1) - direction:
97        Memory to Device when unset
98        Device to Memory when set
99      0x00000004 (bit 2) - endianness:
100        Little endian when unset
101        Big endian when set
102      0x00000008 (bit 3) - use fixed channel:
103        Use automatic channel selection when unset
104        Use DMA request line number when set
105      0x00000010 (bit 4) - set channel as high priority:
106        Normal priority when unset
107        High priority when set
108
109  compatible:
110    items:
111      - const: stericsson,db8500-dma40
112      - const: stericsson,dma40
113
114  reg:
115    items:
116      - description: DMA40 memory base
117      - description: LCPA memory base
118
119  reg-names:
120    items:
121      - const: base
122      - const: lcpa
123
124  interrupts:
125    maxItems: 1
126
127  clocks:
128    maxItems: 1
129
130  memcpy-channels:
131    $ref: /schemas/types.yaml#/definitions/uint32-array
132    description: Array of u32 elements indicating which channels on the DMA
133      engine are elegible for memcpy transfers
134
135required:
136  - "#dma-cells"
137  - compatible
138  - reg
139  - interrupts
140  - clocks
141  - memcpy-channels
142
143additionalProperties: false
144
145examples:
146  - |
147    #include <dt-bindings/interrupt-controller/irq.h>
148    #include <dt-bindings/interrupt-controller/arm-gic.h>
149    #include <dt-bindings/mfd/dbx500-prcmu.h>
150    dma-controller@801C0000 {
151      compatible = "stericsson,db8500-dma40", "stericsson,dma40";
152      reg = <0x801C0000 0x1000>, <0x40010000 0x800>;
153      reg-names = "base", "lcpa";
154      interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
155      #dma-cells = <3>;
156      memcpy-channels = <56 57 58 59 60>;
157      clocks = <&prcmu_clk PRCMU_DMACLK>;
158    };
159...
160