1Sitronix ST7586 display panel
2
3Required properties:
4- compatible:	"lego,ev3-lcd".
5- a0-gpios:	The A0 signal (since this binding is for serial mode, this is
6                the pin labeled D1 on the controller, not the pin labeled A0)
7- reset-gpios:	Reset pin
8
9The node for this driver must be a child node of a SPI controller, hence
10all mandatory properties described in ../spi/spi-bus.txt must be specified.
11
12Optional properties:
13- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
14
15Example:
16	display@0{
17		compatible = "lego,ev3-lcd";
18		reg = <0>;
19		spi-max-frequency = <10000000>;
20		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
21		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
22	};
23