1 /**************************************************************************
2  * Initio 9100 device driver for Linux.
3  *
4  * Copyright (c) 1994-1998 Initio Corporation
5  * All rights reserved.
6  *
7  * Cleanups (c) Copyright 2007 Red Hat <alan@lxorguk.ukuu.org.uk>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 2, or (at your option)
12  * any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; see the file COPYING.  If not, write to
21  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
22  *
23  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
27  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33  * SUCH DAMAGE.
34  *
35  **************************************************************************/
36 
37 
38 #include <linux/types.h>
39 
40 #define TOTAL_SG_ENTRY		32
41 #define MAX_SUPPORTED_ADAPTERS  8
42 #define MAX_OFFSET		15
43 #define MAX_TARGETS		16
44 
45 typedef struct {
46 	unsigned short base;
47 	unsigned short vec;
48 } i91u_config;
49 
50 /***************************************/
51 /*  Tulip Configuration Register Set */
52 /***************************************/
53 #define TUL_PVID        0x00	/* Vendor ID                    */
54 #define TUL_PDID        0x02	/* Device ID                    */
55 #define TUL_PCMD        0x04	/* Command                      */
56 #define TUL_PSTUS       0x06	/* Status                       */
57 #define TUL_PRID        0x08	/* Revision number              */
58 #define TUL_PPI         0x09	/* Programming interface        */
59 #define TUL_PSC         0x0A	/* Sub Class                    */
60 #define TUL_PBC         0x0B	/* Base Class                   */
61 #define TUL_PCLS        0x0C	/* Cache line size              */
62 #define TUL_PLTR        0x0D	/* Latency timer                */
63 #define TUL_PHDT        0x0E	/* Header type                  */
64 #define TUL_PBIST       0x0F	/* BIST                         */
65 #define TUL_PBAD        0x10	/* Base address                 */
66 #define TUL_PBAD1       0x14	/* Base address                 */
67 #define TUL_PBAD2       0x18	/* Base address                 */
68 #define TUL_PBAD3       0x1C	/* Base address                 */
69 #define TUL_PBAD4       0x20	/* Base address                 */
70 #define TUL_PBAD5       0x24	/* Base address                 */
71 #define TUL_PRSVD       0x28	/* Reserved                     */
72 #define TUL_PRSVD1      0x2C	/* Reserved                     */
73 #define TUL_PRAD        0x30	/* Expansion ROM base address   */
74 #define TUL_PRSVD2      0x34	/* Reserved                     */
75 #define TUL_PRSVD3      0x38	/* Reserved                     */
76 #define TUL_PINTL       0x3C	/* Interrupt line               */
77 #define TUL_PINTP       0x3D	/* Interrupt pin                */
78 #define TUL_PIGNT       0x3E	/* MIN_GNT                      */
79 #define TUL_PMGNT       0x3F	/* MAX_GNT                      */
80 
81 /************************/
82 /*  Jasmin Register Set */
83 /************************/
84 #define TUL_HACFG0      0x40	/* H/A Configuration Register 0         */
85 #define TUL_HACFG1      0x41	/* H/A Configuration Register 1         */
86 #define TUL_HACFG2      0x42	/* H/A Configuration Register 2         */
87 
88 #define TUL_SDCFG0      0x44	/* SCSI Device Configuration 0          */
89 #define TUL_SDCFG1      0x45	/* SCSI Device Configuration 1          */
90 #define TUL_SDCFG2      0x46	/* SCSI Device Configuration 2          */
91 #define TUL_SDCFG3      0x47	/* SCSI Device Configuration 3          */
92 
93 #define TUL_GINTS       0x50	/* Global Interrupt Status Register     */
94 #define TUL_GIMSK       0x52	/* Global Interrupt MASK Register       */
95 #define TUL_GCTRL       0x54	/* Global Control Register              */
96 #define TUL_GCTRL_EEPROM_BIT    0x04
97 #define TUL_GCTRL1      0x55	/* Global Control Register              */
98 #define TUL_DMACFG      0x5B	/* DMA configuration                    */
99 #define TUL_NVRAM       0x5D	/* Non-volatile RAM port                */
100 
101 #define TUL_SCnt0       0x80	/* 00 R/W Transfer Counter Low          */
102 #define TUL_SCnt1       0x81	/* 01 R/W Transfer Counter Mid          */
103 #define TUL_SCnt2       0x82	/* 02 R/W Transfer Count High           */
104 #define TUL_SFifoCnt    0x83	/* 03 R   FIFO counter                  */
105 #define TUL_SIntEnable  0x84	/* 03 W   Interrupt enble               */
106 #define TUL_SInt        0x84	/* 04 R   Interrupt Register            */
107 #define TUL_SCtrl0      0x85	/* 05 W   Control 0                     */
108 #define TUL_SStatus0    0x85	/* 05 R   Status 0                      */
109 #define TUL_SCtrl1      0x86	/* 06 W   Control 1                     */
110 #define TUL_SStatus1    0x86	/* 06 R   Status 1                      */
111 #define TUL_SConfig     0x87	/* 07 W   Configuration                 */
112 #define TUL_SStatus2    0x87	/* 07 R   Status 2                      */
113 #define TUL_SPeriod     0x88	/* 08 W   Sync. Transfer Period & Offset */
114 #define TUL_SOffset     0x88	/* 08 R   Offset                        */
115 #define TUL_SScsiId     0x89	/* 09 W   SCSI ID                       */
116 #define TUL_SBusId      0x89	/* 09 R   SCSI BUS ID                   */
117 #define TUL_STimeOut    0x8A	/* 0A W   Sel/Resel Time Out Register   */
118 #define TUL_SIdent      0x8A	/* 0A R   Identify Message Register     */
119 #define TUL_SAvail      0x8A	/* 0A R   Available Counter Register   */
120 #define TUL_SData       0x8B	/* 0B R/W SCSI data in/out              */
121 #define TUL_SFifo       0x8C	/* 0C R/W FIFO                          */
122 #define TUL_SSignal     0x90	/* 10 R/W SCSI signal in/out            */
123 #define TUL_SCmd        0x91	/* 11 R/W Command                       */
124 #define TUL_STest0      0x92	/* 12 R/W Test0                         */
125 #define TUL_STest1      0x93	/* 13 R/W Test1                         */
126 #define TUL_SCFG1	0x94	/* 14 R/W Configuration                 */
127 
128 #define TUL_XAddH       0xC0	/*DMA Transfer Physical Address         */
129 #define TUL_XAddW       0xC8	/*DMA Current Transfer Physical Address */
130 #define TUL_XCntH       0xD0	/*DMA Transfer Counter                  */
131 #define TUL_XCntW       0xD4	/*DMA Current Transfer Counter          */
132 #define TUL_XCmd        0xD8	/*DMA Command Register                  */
133 #define TUL_Int         0xDC	/*Interrupt Register                    */
134 #define TUL_XStatus     0xDD	/*DMA status Register                   */
135 #define TUL_Mask        0xE0	/*Interrupt Mask Register               */
136 #define TUL_XCtrl       0xE4	/*DMA Control Register                  */
137 #define TUL_XCtrl1      0xE5	/*DMA Control Register 1                */
138 #define TUL_XFifo       0xE8	/*DMA FIFO                              */
139 
140 #define TUL_WCtrl       0xF7	/*Bus master wait state control         */
141 #define TUL_DCtrl       0xFB	/*DMA delay control                     */
142 
143 /*----------------------------------------------------------------------*/
144 /*   bit definition for Command register of Configuration Space Header  */
145 /*----------------------------------------------------------------------*/
146 #define BUSMS           0x04	/* BUS MASTER Enable                    */
147 #define IOSPA           0x01	/* IO Space Enable                      */
148 
149 /*----------------------------------------------------------------------*/
150 /* Command Codes of Tulip SCSI Command register                         */
151 /*----------------------------------------------------------------------*/
152 #define TSC_EN_RESEL    0x80	/* Enable Reselection                   */
153 #define TSC_CMD_COMP    0x84	/* Command Complete Sequence            */
154 #define TSC_SEL         0x01	/* Select Without ATN Sequence          */
155 #define TSC_SEL_ATN     0x11	/* Select With ATN Sequence             */
156 #define TSC_SEL_ATN_DMA 0x51	/* Select With ATN Sequence with DMA    */
157 #define TSC_SEL_ATN3    0x31	/* Select With ATN3 Sequence            */
158 #define TSC_SEL_ATNSTOP 0x12	/* Select With ATN and Stop Sequence    */
159 #define TSC_SELATNSTOP  0x1E	/* Select With ATN and Stop Sequence    */
160 
161 #define TSC_SEL_ATN_DIRECT_IN   0x95	/* Select With ATN Sequence     */
162 #define TSC_SEL_ATN_DIRECT_OUT  0x15	/* Select With ATN Sequence     */
163 #define TSC_SEL_ATN3_DIRECT_IN  0xB5	/* Select With ATN3 Sequence    */
164 #define TSC_SEL_ATN3_DIRECT_OUT 0x35	/* Select With ATN3 Sequence    */
165 #define TSC_XF_DMA_OUT_DIRECT   0x06	/* DMA Xfer Information out      */
166 #define TSC_XF_DMA_IN_DIRECT    0x86	/* DMA Xfer Information in       */
167 
168 #define TSC_XF_DMA_OUT  0x43	/* DMA Xfer Information out              */
169 #define TSC_XF_DMA_IN   0xC3	/* DMA Xfer Information in               */
170 #define TSC_XF_FIFO_OUT 0x03	/* FIFO Xfer Information out             */
171 #define TSC_XF_FIFO_IN  0x83	/* FIFO Xfer Information in              */
172 
173 #define TSC_MSG_ACCEPT  0x0F	/* Message Accept                       */
174 
175 /*----------------------------------------------------------------------*/
176 /* bit definition for Tulip SCSI Control 0 Register                     */
177 /*----------------------------------------------------------------------*/
178 #define TSC_RST_SEQ     0x20	/* Reset sequence counter               */
179 #define TSC_FLUSH_FIFO  0x10	/* Flush FIFO                           */
180 #define TSC_ABT_CMD     0x04	/* Abort command (sequence)             */
181 #define TSC_RST_CHIP    0x02	/* Reset SCSI Chip                      */
182 #define TSC_RST_BUS     0x01	/* Reset SCSI Bus                       */
183 
184 /*----------------------------------------------------------------------*/
185 /* bit definition for Tulip SCSI Control 1 Register                     */
186 /*----------------------------------------------------------------------*/
187 #define TSC_EN_SCAM     0x80	/* Enable SCAM                          */
188 #define TSC_TIMER       0x40	/* Select timeout unit                  */
189 #define TSC_EN_SCSI2    0x20	/* SCSI-2 mode                          */
190 #define TSC_PWDN        0x10	/* Power down mode                      */
191 #define TSC_WIDE_CPU    0x08	/* Wide CPU                             */
192 #define TSC_HW_RESELECT 0x04	/* Enable HW reselect                   */
193 #define TSC_EN_BUS_OUT  0x02	/* Enable SCSI data bus out latch       */
194 #define TSC_EN_BUS_IN   0x01	/* Enable SCSI data bus in latch        */
195 
196 /*----------------------------------------------------------------------*/
197 /* bit definition for Tulip SCSI Configuration Register                 */
198 /*----------------------------------------------------------------------*/
199 #define TSC_EN_LATCH    0x80	/* Enable phase latch                   */
200 #define TSC_INITIATOR   0x40	/* Initiator mode                       */
201 #define TSC_EN_SCSI_PAR 0x20	/* Enable SCSI parity                   */
202 #define TSC_DMA_8BIT    0x10	/* Alternate dma 8-bits mode            */
203 #define TSC_DMA_16BIT   0x08	/* Alternate dma 16-bits mode           */
204 #define TSC_EN_WDACK    0x04	/* Enable DACK while wide SCSI xfer     */
205 #define TSC_ALT_PERIOD  0x02	/* Alternate sync period mode           */
206 #define TSC_DIS_SCSIRST 0x01	/* Disable SCSI bus reset us            */
207 
208 #define TSC_INITDEFAULT (TSC_INITIATOR | TSC_EN_LATCH | TSC_ALT_PERIOD | TSC_DIS_SCSIRST)
209 
210 #define TSC_WIDE_SCSI   0x80	/* Enable Wide SCSI                     */
211 
212 /*----------------------------------------------------------------------*/
213 /* bit definition for Tulip SCSI signal Register                        */
214 /*----------------------------------------------------------------------*/
215 #define TSC_RST_ACK     0x00	/* Release ACK signal                   */
216 #define TSC_RST_ATN     0x00	/* Release ATN signal                   */
217 #define TSC_RST_BSY     0x00	/* Release BSY signal                   */
218 
219 #define TSC_SET_ACK     0x40	/* ACK signal                           */
220 #define TSC_SET_ATN     0x08	/* ATN signal                           */
221 
222 #define TSC_REQI        0x80	/* REQ signal                           */
223 #define TSC_ACKI        0x40	/* ACK signal                           */
224 #define TSC_BSYI        0x20	/* BSY signal                           */
225 #define TSC_SELI        0x10	/* SEL signal                           */
226 #define TSC_ATNI        0x08	/* ATN signal                           */
227 #define TSC_MSGI        0x04	/* MSG signal                           */
228 #define TSC_CDI         0x02	/* C/D signal                           */
229 #define TSC_IOI         0x01	/* I/O signal                           */
230 
231 
232 /*----------------------------------------------------------------------*/
233 /* bit definition for Tulip SCSI Status 0 Register                      */
234 /*----------------------------------------------------------------------*/
235 #define TSS_INT_PENDING 0x80	/* Interrupt pending            */
236 #define TSS_SEQ_ACTIVE  0x40	/* Sequencer active             */
237 #define TSS_XFER_CNT    0x20	/* Transfer counter zero        */
238 #define TSS_FIFO_EMPTY  0x10	/* FIFO empty                   */
239 #define TSS_PAR_ERROR   0x08	/* SCSI parity error            */
240 #define TSS_PH_MASK     0x07	/* SCSI phase mask              */
241 
242 /*----------------------------------------------------------------------*/
243 /* bit definition for Tulip SCSI Status 1 Register                      */
244 /*----------------------------------------------------------------------*/
245 #define TSS_STATUS_RCV  0x08	/* Status received              */
246 #define TSS_MSG_SEND    0x40	/* Message sent                 */
247 #define TSS_CMD_PH_CMP  0x20	/* command phase done              */
248 #define TSS_DATA_PH_CMP 0x10	/* Data phase done              */
249 #define TSS_STATUS_SEND 0x08	/* Status sent                  */
250 #define TSS_XFER_CMP    0x04	/* Transfer completed           */
251 #define TSS_SEL_CMP     0x02	/* Selection completed          */
252 #define TSS_ARB_CMP     0x01	/* Arbitration completed        */
253 
254 /*----------------------------------------------------------------------*/
255 /* bit definition for Tulip SCSI Status 2 Register                      */
256 /*----------------------------------------------------------------------*/
257 #define TSS_CMD_ABTED   0x80	/* Command aborted              */
258 #define TSS_OFFSET_0    0x40	/* Offset counter zero          */
259 #define TSS_FIFO_FULL   0x20	/* FIFO full                    */
260 #define TSS_TIMEOUT_0   0x10	/* Timeout counter zero         */
261 #define TSS_BUSY_RLS    0x08	/* Busy release                 */
262 #define TSS_PH_MISMATCH 0x04	/* Phase mismatch               */
263 #define TSS_SCSI_BUS_EN 0x02	/* SCSI data bus enable         */
264 #define TSS_SCSIRST     0x01	/* SCSI bus reset in progress   */
265 
266 /*----------------------------------------------------------------------*/
267 /* bit definition for Tulip SCSI Interrupt Register                     */
268 /*----------------------------------------------------------------------*/
269 #define TSS_RESEL_INT   0x80	/* Reselected interrupt         */
270 #define TSS_SEL_TIMEOUT 0x40	/* Selected/reselected timeout  */
271 #define TSS_BUS_SERV    0x20
272 #define TSS_SCSIRST_INT 0x10	/* SCSI bus reset detected      */
273 #define TSS_DISC_INT    0x08	/* Disconnected interrupt       */
274 #define TSS_SEL_INT     0x04	/* Select interrupt             */
275 #define TSS_SCAM_SEL    0x02	/* SCAM selected                */
276 #define TSS_FUNC_COMP   0x01
277 
278 /*----------------------------------------------------------------------*/
279 /* SCSI Phase Codes.                                                    */
280 /*----------------------------------------------------------------------*/
281 #define DATA_OUT        0
282 #define DATA_IN         1	/* 4                            */
283 #define CMD_OUT         2
284 #define STATUS_IN       3	/* 6                            */
285 #define MSG_OUT         6	/* 3                            */
286 #define MSG_IN          7
287 
288 
289 
290 /*----------------------------------------------------------------------*/
291 /* Command Codes of Tulip xfer Command register                         */
292 /*----------------------------------------------------------------------*/
293 #define TAX_X_FORC      0x02
294 #define TAX_X_ABT       0x04
295 #define TAX_X_CLR_FIFO  0x08
296 
297 #define TAX_X_IN        0x21
298 #define TAX_X_OUT       0x01
299 #define TAX_SG_IN       0xA1
300 #define TAX_SG_OUT      0x81
301 
302 /*----------------------------------------------------------------------*/
303 /* Tulip Interrupt Register                                             */
304 /*----------------------------------------------------------------------*/
305 #define XCMP            0x01
306 #define FCMP            0x02
307 #define XABT            0x04
308 #define XERR            0x08
309 #define SCMP            0x10
310 #define IPEND           0x80
311 
312 /*----------------------------------------------------------------------*/
313 /* Tulip DMA Status Register                                            */
314 /*----------------------------------------------------------------------*/
315 #define XPEND           0x01	/* Transfer pending             */
316 #define FEMPTY          0x02	/* FIFO empty                   */
317 
318 
319 
320 /*----------------------------------------------------------------------*/
321 /* bit definition for TUL_GCTRL                                         */
322 /*----------------------------------------------------------------------*/
323 #define EXTSG           0x80
324 #define EXTAD           0x60
325 #define SEG4K           0x08
326 #define EEPRG           0x04
327 #define MRMUL           0x02
328 
329 /*----------------------------------------------------------------------*/
330 /* bit definition for TUL_NVRAM                                         */
331 /*----------------------------------------------------------------------*/
332 #define SE2CS           0x08
333 #define SE2CLK          0x04
334 #define SE2DO           0x02
335 #define SE2DI           0x01
336 
337 
338 /************************************************************************/
339 /*              Scatter-Gather Element Structure                        */
340 /************************************************************************/
341 struct sg_entry {
342 	u32 data;		/* Data Pointer */
343 	u32 len;		/* Data Length */
344 };
345 
346 /***********************************************************************
347 		SCSI Control Block
348 ************************************************************************/
349 struct scsi_ctrl_blk {
350 	struct scsi_ctrl_blk *next;
351 	u8 status;	/*4 */
352 	u8 next_state;	/*5 */
353 	u8 mode;		/*6 */
354 	u8 msgin;	/*7 SCB_Res0 */
355 	u16 sgidx;	/*8 */
356 	u16 sgmax;	/*A */
357 #ifdef ALPHA
358 	u32 reserved[2];	/*C */
359 #else
360 	u32 reserved[3];	/*C */
361 #endif
362 
363 	u32 xferlen;	/*18 Current xfer len           */
364 	u32 totxlen;	/*1C Total xfer len             */
365 	u32 paddr;		/*20 SCB phy. Addr. */
366 
367 	u8 opcode;	/*24 SCB command code */
368 	u8 flags;	/*25 SCB Flags */
369 	u8 target;	/*26 Target Id */
370 	u8 lun;		/*27 Lun */
371 	u32 bufptr;		/*28 Data Buffer Pointer */
372 	u32 buflen;		/*2C Data Allocation Length */
373 	u8 sglen;	/*30 SG list # */
374 	u8 senselen;	/*31 Sense Allocation Length */
375 	u8 hastat;	/*32 */
376 	u8 tastat;	/*33 */
377 	u8 cdblen;	/*34 CDB Length */
378 	u8 ident;	/*35 Identify */
379 	u8 tagmsg;	/*36 Tag Message */
380 	u8 tagid;	/*37 Queue Tag */
381 	u8 cdb[12];	/*38 */
382 	u32 sgpaddr;	/*44 SG List/Sense Buf phy. Addr. */
383 	u32 senseptr;	/*48 Sense data pointer */
384 	void (*post) (u8 *, u8 *);	/*4C POST routine */
385 	struct scsi_cmnd *srb;	/*50 SRB Pointer */
386 	struct sg_entry sglist[TOTAL_SG_ENTRY];	/*54 Start of SG list */
387 };
388 
389 /* Bit Definition for status */
390 #define SCB_RENT        0x01
391 #define SCB_PEND        0x02
392 #define SCB_CONTIG      0x04	/* Contingent Allegiance */
393 #define SCB_SELECT      0x08
394 #define SCB_BUSY        0x10
395 #define SCB_DONE        0x20
396 
397 
398 /* Opcodes for opcode */
399 #define ExecSCSI        0x1
400 #define BusDevRst       0x2
401 #define AbortCmd        0x3
402 
403 
404 /* Bit Definition for mode */
405 #define SCM_RSENS       0x01	/* request sense mode */
406 
407 
408 /* Bit Definition for flags */
409 #define SCF_DONE        0x01
410 #define SCF_POST        0x02
411 #define SCF_SENSE       0x04
412 #define SCF_DIR         0x18
413 #define SCF_NO_DCHK     0x00
414 #define SCF_DIN         0x08
415 #define SCF_DOUT        0x10
416 #define SCF_NO_XF       0x18
417 #define SCF_WR_VF       0x20	/* Write verify turn on         */
418 #define SCF_POLL        0x40
419 #define SCF_SG          0x80
420 
421 /* Error Codes for SCB_HaStat */
422 #define HOST_SEL_TOUT   0x11
423 #define HOST_DO_DU      0x12
424 #define HOST_BUS_FREE   0x13
425 #define HOST_BAD_PHAS   0x14
426 #define HOST_INV_CMD    0x16
427 #define HOST_ABORTED    0x1A	/* 07/21/98 */
428 #define HOST_SCSI_RST   0x1B
429 #define HOST_DEV_RST    0x1C
430 
431 /* Error Codes for SCB_TaStat */
432 #define TARGET_CHKCOND  0x02
433 #define TARGET_BUSY     0x08
434 #define INI_QUEUE_FULL	0x28
435 
436 /***********************************************************************
437 		Target Device Control Structure
438 **********************************************************************/
439 
440 struct target_control {
441 	u16 flags;
442 	u8 js_period;
443 	u8 sconfig0;
444 	u16 drv_flags;
445 	u8 heads;
446 	u8 sectors;
447 };
448 
449 /***********************************************************************
450 		Target Device Control Structure
451 **********************************************************************/
452 
453 /* Bit Definition for TCF_Flags */
454 #define TCF_SCSI_RATE           0x0007
455 #define TCF_EN_DISC             0x0008
456 #define TCF_NO_SYNC_NEGO        0x0010
457 #define TCF_NO_WDTR             0x0020
458 #define TCF_EN_255              0x0040
459 #define TCF_EN_START            0x0080
460 #define TCF_WDTR_DONE           0x0100
461 #define TCF_SYNC_DONE           0x0200
462 #define TCF_BUSY                0x0400
463 
464 
465 /* Bit Definition for TCF_DrvFlags */
466 #define TCF_DRV_BUSY            0x01	/* Indicate target busy(driver) */
467 #define TCF_DRV_EN_TAG          0x0800
468 #define TCF_DRV_255_63          0x0400
469 
470 /***********************************************************************
471 	      Host Adapter Control Structure
472 ************************************************************************/
473 struct initio_host {
474 	u16 addr;		/* 00 */
475 	u16 bios_addr;		/* 02 */
476 	u8 irq;			/* 04 */
477 	u8 scsi_id;		/* 05 */
478 	u8 max_tar;		/* 06 */
479 	u8 num_scbs;		/* 07 */
480 
481 	u8 flags;		/* 08 */
482 	u8 index;		/* 09 */
483 	u8 ha_id;		/* 0A */
484 	u8 config;		/* 0B */
485 	u16 idmask;		/* 0C */
486 	u8 semaph;		/* 0E */
487 	u8 phase;		/* 0F */
488 	u8 jsstatus0;		/* 10 */
489 	u8 jsint;		/* 11 */
490 	u8 jsstatus1;		/* 12 */
491 	u8 sconf1;		/* 13 */
492 
493 	u8 msg[8];		/* 14 */
494 	struct scsi_ctrl_blk *next_avail;	/* 1C */
495 	struct scsi_ctrl_blk *scb;		/* 20 */
496 	struct scsi_ctrl_blk *scb_end;		/* 24 */ /*UNUSED*/
497 	struct scsi_ctrl_blk *next_pending;	/* 28 */
498 	struct scsi_ctrl_blk *next_contig;	/* 2C */ /*UNUSED*/
499 	struct scsi_ctrl_blk *active;		/* 30 */
500 	struct target_control *active_tc;	/* 34 */
501 
502 	struct scsi_ctrl_blk *first_avail;	/* 38 */
503 	struct scsi_ctrl_blk *last_avail;	/* 3C */
504 	struct scsi_ctrl_blk *first_pending;	/* 40 */
505 	struct scsi_ctrl_blk *last_pending;	/* 44 */
506 	struct scsi_ctrl_blk *first_busy;	/* 48 */
507 	struct scsi_ctrl_blk *last_busy;	/* 4C */
508 	struct scsi_ctrl_blk *first_done;	/* 50 */
509 	struct scsi_ctrl_blk *last_done;	/* 54 */
510 	u8 max_tags[16];	/* 58 */
511 	u8 act_tags[16];	/* 68 */
512 	struct target_control targets[MAX_TARGETS];	/* 78 */
513 	spinlock_t avail_lock;
514 	spinlock_t semaph_lock;
515 	struct pci_dev *pci_dev;
516 };
517 
518 /* Bit Definition for HCB_Config */
519 #define HCC_SCSI_RESET          0x01
520 #define HCC_EN_PAR              0x02
521 #define HCC_ACT_TERM1           0x04
522 #define HCC_ACT_TERM2           0x08
523 #define HCC_AUTO_TERM           0x10
524 #define HCC_EN_PWR              0x80
525 
526 /* Bit Definition for HCB_Flags */
527 #define HCF_EXPECT_DISC         0x01
528 #define HCF_EXPECT_SELECT       0x02
529 #define HCF_EXPECT_RESET        0x10
530 #define HCF_EXPECT_DONE_DISC    0x20
531 
532 /******************************************************************
533 	Serial EEProm
534 *******************************************************************/
535 
536 typedef struct _NVRAM_SCSI {	/* SCSI channel configuration   */
537 	u8 NVM_ChSCSIID;	/* 0Ch -> Channel SCSI ID       */
538 	u8 NVM_ChConfig1;	/* 0Dh -> Channel config 1      */
539 	u8 NVM_ChConfig2;	/* 0Eh -> Channel config 2      */
540 	u8 NVM_NumOfTarg;	/* 0Fh -> Number of SCSI target */
541 	/* SCSI target configuration    */
542 	u8 NVM_Targ0Config;	/* 10h -> Target 0 configuration */
543 	u8 NVM_Targ1Config;	/* 11h -> Target 1 configuration */
544 	u8 NVM_Targ2Config;	/* 12h -> Target 2 configuration */
545 	u8 NVM_Targ3Config;	/* 13h -> Target 3 configuration */
546 	u8 NVM_Targ4Config;	/* 14h -> Target 4 configuration */
547 	u8 NVM_Targ5Config;	/* 15h -> Target 5 configuration */
548 	u8 NVM_Targ6Config;	/* 16h -> Target 6 configuration */
549 	u8 NVM_Targ7Config;	/* 17h -> Target 7 configuration */
550 	u8 NVM_Targ8Config;	/* 18h -> Target 8 configuration */
551 	u8 NVM_Targ9Config;	/* 19h -> Target 9 configuration */
552 	u8 NVM_TargAConfig;	/* 1Ah -> Target A configuration */
553 	u8 NVM_TargBConfig;	/* 1Bh -> Target B configuration */
554 	u8 NVM_TargCConfig;	/* 1Ch -> Target C configuration */
555 	u8 NVM_TargDConfig;	/* 1Dh -> Target D configuration */
556 	u8 NVM_TargEConfig;	/* 1Eh -> Target E configuration */
557 	u8 NVM_TargFConfig;	/* 1Fh -> Target F configuration */
558 } NVRAM_SCSI;
559 
560 typedef struct _NVRAM {
561 /*----------header ---------------*/
562 	u16 NVM_Signature;	/* 0,1: Signature */
563 	u8 NVM_Size;		/* 2:   Size of data structure */
564 	u8 NVM_Revision;	/* 3:   Revision of data structure */
565 	/* ----Host Adapter Structure ---- */
566 	u8 NVM_ModelByte0;	/* 4:   Model number (byte 0) */
567 	u8 NVM_ModelByte1;	/* 5:   Model number (byte 1) */
568 	u8 NVM_ModelInfo;	/* 6:   Model information         */
569 	u8 NVM_NumOfCh;	/* 7:   Number of SCSI channel */
570 	u8 NVM_BIOSConfig1;	/* 8:   BIOS configuration 1  */
571 	u8 NVM_BIOSConfig2;	/* 9:   BIOS configuration 2  */
572 	u8 NVM_HAConfig1;	/* A:   Hoat adapter configuration 1 */
573 	u8 NVM_HAConfig2;	/* B:   Hoat adapter configuration 2 */
574 	NVRAM_SCSI NVM_SCSIInfo[2];
575 	u8 NVM_reserved[10];
576 	/* ---------- CheckSum ----------       */
577 	u16 NVM_CheckSum;	/* 0x3E, 0x3F: Checksum of NVRam        */
578 } NVRAM, *PNVRAM;
579 
580 /* Bios Configuration for nvram->BIOSConfig1                            */
581 #define NBC1_ENABLE             0x01	/* BIOS enable                  */
582 #define NBC1_8DRIVE             0x02	/* Support more than 2 drives   */
583 #define NBC1_REMOVABLE          0x04	/* Support removable drive      */
584 #define NBC1_INT19              0x08	/* Intercept int 19h            */
585 #define NBC1_BIOSSCAN           0x10	/* Dynamic BIOS scan            */
586 #define NBC1_LUNSUPPORT         0x40	/* Support LUN                  */
587 
588 /* HA Configuration Byte 1                                              */
589 #define NHC1_BOOTIDMASK 0x0F	/* Boot ID number               */
590 #define NHC1_LUNMASK    0x70	/* Boot LUN number              */
591 #define NHC1_CHANMASK   0x80	/* Boot Channel number          */
592 
593 /* Bit definition for nvram->SCSIconfig1                                */
594 #define NCC1_BUSRESET           0x01	/* Reset SCSI bus at power up   */
595 #define NCC1_PARITYCHK          0x02	/* SCSI parity enable           */
596 #define NCC1_ACTTERM1           0x04	/* Enable active terminator 1   */
597 #define NCC1_ACTTERM2           0x08	/* Enable active terminator 2   */
598 #define NCC1_AUTOTERM           0x10	/* Enable auto terminator       */
599 #define NCC1_PWRMGR             0x80	/* Enable power management      */
600 
601 /* Bit definition for SCSI Target configuration byte                    */
602 #define NTC_DISCONNECT          0x08	/* Enable SCSI disconnect       */
603 #define NTC_SYNC                0x10	/* SYNC_NEGO                    */
604 #define NTC_NO_WDTR             0x20	/* SYNC_NEGO                    */
605 #define NTC_1GIGA               0x40	/* 255 head / 63 sectors (64/32) */
606 #define NTC_SPINUP              0x80	/* Start disk drive             */
607 
608 /*      Default NVRam values                                            */
609 #define INI_SIGNATURE           0xC925
610 #define NBC1_DEFAULT            (NBC1_ENABLE)
611 #define NCC1_DEFAULT            (NCC1_BUSRESET | NCC1_AUTOTERM | NCC1_PARITYCHK)
612 #define NTC_DEFAULT             (NTC_NO_WDTR | NTC_1GIGA | NTC_DISCONNECT)
613 
614 /* SCSI related definition                                              */
615 #define DISC_NOT_ALLOW          0x80	/* Disconnect is not allowed    */
616 #define DISC_ALLOW              0xC0	/* Disconnect is allowed        */
617 #define SCSICMD_RequestSense    0x03
618 
619 #define SCSI_ABORT_SNOOZE 0
620 #define SCSI_ABORT_SUCCESS 1
621 #define SCSI_ABORT_PENDING 2
622 #define SCSI_ABORT_BUSY 3
623 #define SCSI_ABORT_NOT_RUNNING 4
624 #define SCSI_ABORT_ERROR 5
625 
626 #define SCSI_RESET_SNOOZE 0
627 #define SCSI_RESET_PUNT 1
628 #define SCSI_RESET_SUCCESS 2
629 #define SCSI_RESET_PENDING 3
630 #define SCSI_RESET_WAKEUP 4
631 #define SCSI_RESET_NOT_RUNNING 5
632 #define SCSI_RESET_ERROR 6
633 
634 #define SCSI_RESET_SYNCHRONOUS		0x01
635 #define SCSI_RESET_ASYNCHRONOUS		0x02
636 #define SCSI_RESET_SUGGEST_BUS_RESET	0x04
637 #define SCSI_RESET_SUGGEST_HOST_RESET	0x08
638 
639 #define SCSI_RESET_BUS_RESET 0x100
640 #define SCSI_RESET_HOST_RESET 0x200
641 #define SCSI_RESET_ACTION   0xff
642 
643 struct initio_cmd_priv {
644 	dma_addr_t sense_dma_addr;
645 	dma_addr_t sglist_dma_addr;
646 };
647 
initio_priv(struct scsi_cmnd * cmd)648 static inline struct initio_cmd_priv *initio_priv(struct scsi_cmnd *cmd)
649 {
650 	return scsi_cmd_priv(cmd);
651 }
652