1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (c) 2014 Linaro Ltd.
4 * Copyright (c) 2014 HiSilicon Limited.
5 */
6
7 #include <linux/delay.h>
8 #include <linux/io.h>
9 #include <linux/mfd/syscon.h>
10 #include <linux/module.h>
11 #include <linux/phy/phy.h>
12 #include <linux/platform_device.h>
13 #include <linux/regmap.h>
14
15 #define SATA_PHY0_CTLL 0xa0
16 #define MPLL_MULTIPLIER_SHIFT 1
17 #define MPLL_MULTIPLIER_MASK 0xfe
18 #define MPLL_MULTIPLIER_50M 0x3c
19 #define MPLL_MULTIPLIER_100M 0x1e
20 #define PHY_RESET BIT(0)
21 #define REF_SSP_EN BIT(9)
22 #define SSC_EN BIT(10)
23 #define REF_USE_PAD BIT(23)
24
25 #define SATA_PORT_PHYCTL 0x174
26 #define SPEED_MODE_MASK 0x6f0000
27 #define HALF_RATE_SHIFT 16
28 #define PHY_CONFIG_SHIFT 18
29 #define GEN2_EN_SHIFT 21
30 #define SPEED_CTRL BIT(20)
31
32 #define SATA_PORT_PHYCTL1 0x148
33 #define AMPLITUDE_MASK 0x3ffffe
34 #define AMPLITUDE_GEN3 0x68
35 #define AMPLITUDE_GEN3_SHIFT 15
36 #define AMPLITUDE_GEN2 0x56
37 #define AMPLITUDE_GEN2_SHIFT 8
38 #define AMPLITUDE_GEN1 0x56
39 #define AMPLITUDE_GEN1_SHIFT 1
40
41 #define SATA_PORT_PHYCTL2 0x14c
42 #define PREEMPH_MASK 0x3ffff
43 #define PREEMPH_GEN3 0x20
44 #define PREEMPH_GEN3_SHIFT 12
45 #define PREEMPH_GEN2 0x15
46 #define PREEMPH_GEN2_SHIFT 6
47 #define PREEMPH_GEN1 0x5
48 #define PREEMPH_GEN1_SHIFT 0
49
50 struct hix5hd2_priv {
51 void __iomem *base;
52 struct regmap *peri_ctrl;
53 };
54
55 enum phy_speed_mode {
56 SPEED_MODE_GEN1 = 0,
57 SPEED_MODE_GEN2 = 1,
58 SPEED_MODE_GEN3 = 2,
59 };
60
hix5hd2_sata_phy_init(struct phy * phy)61 static int hix5hd2_sata_phy_init(struct phy *phy)
62 {
63 struct hix5hd2_priv *priv = phy_get_drvdata(phy);
64 u32 val, data[2];
65 int ret;
66
67 if (priv->peri_ctrl) {
68 ret = of_property_read_u32_array(phy->dev.of_node,
69 "hisilicon,power-reg",
70 &data[0], 2);
71 if (ret) {
72 dev_err(&phy->dev, "Fail read hisilicon,power-reg\n");
73 return ret;
74 }
75
76 regmap_update_bits(priv->peri_ctrl, data[0],
77 BIT(data[1]), BIT(data[1]));
78 }
79
80 /* reset phy */
81 val = readl_relaxed(priv->base + SATA_PHY0_CTLL);
82 val &= ~(MPLL_MULTIPLIER_MASK | REF_USE_PAD);
83 val |= MPLL_MULTIPLIER_50M << MPLL_MULTIPLIER_SHIFT |
84 REF_SSP_EN | PHY_RESET;
85 writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
86 msleep(20);
87 val &= ~PHY_RESET;
88 writel_relaxed(val, priv->base + SATA_PHY0_CTLL);
89
90 val = readl_relaxed(priv->base + SATA_PORT_PHYCTL1);
91 val &= ~AMPLITUDE_MASK;
92 val |= AMPLITUDE_GEN3 << AMPLITUDE_GEN3_SHIFT |
93 AMPLITUDE_GEN2 << AMPLITUDE_GEN2_SHIFT |
94 AMPLITUDE_GEN1 << AMPLITUDE_GEN1_SHIFT;
95 writel_relaxed(val, priv->base + SATA_PORT_PHYCTL1);
96
97 val = readl_relaxed(priv->base + SATA_PORT_PHYCTL2);
98 val &= ~PREEMPH_MASK;
99 val |= PREEMPH_GEN3 << PREEMPH_GEN3_SHIFT |
100 PREEMPH_GEN2 << PREEMPH_GEN2_SHIFT |
101 PREEMPH_GEN1 << PREEMPH_GEN1_SHIFT;
102 writel_relaxed(val, priv->base + SATA_PORT_PHYCTL2);
103
104 /* ensure PHYCTRL setting takes effect */
105 val = readl_relaxed(priv->base + SATA_PORT_PHYCTL);
106 val &= ~SPEED_MODE_MASK;
107 val |= SPEED_MODE_GEN1 << HALF_RATE_SHIFT |
108 SPEED_MODE_GEN1 << PHY_CONFIG_SHIFT |
109 SPEED_MODE_GEN1 << GEN2_EN_SHIFT | SPEED_CTRL;
110 writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
111
112 msleep(20);
113 val &= ~SPEED_MODE_MASK;
114 val |= SPEED_MODE_GEN3 << HALF_RATE_SHIFT |
115 SPEED_MODE_GEN3 << PHY_CONFIG_SHIFT |
116 SPEED_MODE_GEN3 << GEN2_EN_SHIFT | SPEED_CTRL;
117 writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
118
119 val &= ~(SPEED_MODE_MASK | SPEED_CTRL);
120 val |= SPEED_MODE_GEN2 << HALF_RATE_SHIFT |
121 SPEED_MODE_GEN2 << PHY_CONFIG_SHIFT |
122 SPEED_MODE_GEN2 << GEN2_EN_SHIFT;
123 writel_relaxed(val, priv->base + SATA_PORT_PHYCTL);
124
125 return 0;
126 }
127
128 static const struct phy_ops hix5hd2_sata_phy_ops = {
129 .init = hix5hd2_sata_phy_init,
130 .owner = THIS_MODULE,
131 };
132
hix5hd2_sata_phy_probe(struct platform_device * pdev)133 static int hix5hd2_sata_phy_probe(struct platform_device *pdev)
134 {
135 struct phy_provider *phy_provider;
136 struct device *dev = &pdev->dev;
137 struct resource *res;
138 struct phy *phy;
139 struct hix5hd2_priv *priv;
140
141 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
142 if (!priv)
143 return -ENOMEM;
144
145 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
146 if (!res)
147 return -EINVAL;
148
149 priv->base = devm_ioremap(dev, res->start, resource_size(res));
150 if (!priv->base)
151 return -ENOMEM;
152
153 priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
154 "hisilicon,peripheral-syscon");
155 if (IS_ERR(priv->peri_ctrl))
156 priv->peri_ctrl = NULL;
157
158 phy = devm_phy_create(dev, NULL, &hix5hd2_sata_phy_ops);
159 if (IS_ERR(phy)) {
160 dev_err(dev, "failed to create PHY\n");
161 return PTR_ERR(phy);
162 }
163
164 phy_set_drvdata(phy, priv);
165 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
166 return PTR_ERR_OR_ZERO(phy_provider);
167 }
168
169 static const struct of_device_id hix5hd2_sata_phy_of_match[] = {
170 {.compatible = "hisilicon,hix5hd2-sata-phy",},
171 { },
172 };
173 MODULE_DEVICE_TABLE(of, hix5hd2_sata_phy_of_match);
174
175 static struct platform_driver hix5hd2_sata_phy_driver = {
176 .probe = hix5hd2_sata_phy_probe,
177 .driver = {
178 .name = "hix5hd2-sata-phy",
179 .of_match_table = hix5hd2_sata_phy_of_match,
180 }
181 };
182 module_platform_driver(hix5hd2_sata_phy_driver);
183
184 MODULE_AUTHOR("Jiancheng Xue <xuejiancheng@huawei.com>");
185 MODULE_DESCRIPTION("HISILICON HIX5HD2 SATA PHY driver");
186 MODULE_ALIAS("platform:hix5hd2-sata-phy");
187 MODULE_LICENSE("GPL v2");
188