1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * HCI based Driver for Inside Secure microread NFC Chip - i2c layer
4 *
5 * Copyright (C) 2013 Intel Corporation. All rights reserved.
6 */
7
8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
9
10 #include <linux/module.h>
11 #include <linux/i2c.h>
12 #include <linux/delay.h>
13 #include <linux/slab.h>
14 #include <linux/interrupt.h>
15 #include <linux/gpio.h>
16
17 #include <linux/nfc.h>
18 #include <net/nfc/hci.h>
19 #include <net/nfc/llc.h>
20
21 #include "microread.h"
22
23 #define MICROREAD_I2C_DRIVER_NAME "microread"
24
25 #define MICROREAD_I2C_FRAME_HEADROOM 1
26 #define MICROREAD_I2C_FRAME_TAILROOM 1
27
28 /* framing in HCI mode */
29 #define MICROREAD_I2C_LLC_LEN 1
30 #define MICROREAD_I2C_LLC_CRC 1
31 #define MICROREAD_I2C_LLC_LEN_CRC (MICROREAD_I2C_LLC_LEN + \
32 MICROREAD_I2C_LLC_CRC)
33 #define MICROREAD_I2C_LLC_MIN_SIZE (1 + MICROREAD_I2C_LLC_LEN_CRC)
34 #define MICROREAD_I2C_LLC_MAX_PAYLOAD 29
35 #define MICROREAD_I2C_LLC_MAX_SIZE (MICROREAD_I2C_LLC_LEN_CRC + 1 + \
36 MICROREAD_I2C_LLC_MAX_PAYLOAD)
37
38 struct microread_i2c_phy {
39 struct i2c_client *i2c_dev;
40 struct nfc_hci_dev *hdev;
41
42 int hard_fault; /*
43 * < 0 if hardware error occured (e.g. i2c err)
44 * and prevents normal operation.
45 */
46 };
47
48 #define I2C_DUMP_SKB(info, skb) \
49 do { \
50 pr_debug("%s:\n", info); \
51 print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \
52 16, 1, (skb)->data, (skb)->len, 0); \
53 } while (0)
54
microread_i2c_add_len_crc(struct sk_buff * skb)55 static void microread_i2c_add_len_crc(struct sk_buff *skb)
56 {
57 int i;
58 u8 crc = 0;
59 int len;
60
61 len = skb->len;
62 *(u8 *)skb_push(skb, 1) = len;
63
64 for (i = 0; i < skb->len; i++)
65 crc = crc ^ skb->data[i];
66
67 skb_put_u8(skb, crc);
68 }
69
microread_i2c_remove_len_crc(struct sk_buff * skb)70 static void microread_i2c_remove_len_crc(struct sk_buff *skb)
71 {
72 skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM);
73 skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM);
74 }
75
check_crc(const struct sk_buff * skb)76 static int check_crc(const struct sk_buff *skb)
77 {
78 int i;
79 u8 crc = 0;
80
81 for (i = 0; i < skb->len - 1; i++)
82 crc = crc ^ skb->data[i];
83
84 if (crc != skb->data[skb->len-1]) {
85 pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]);
86 pr_info("%s: BAD CRC\n", __func__);
87 return -EPERM;
88 }
89
90 return 0;
91 }
92
microread_i2c_enable(void * phy_id)93 static int microread_i2c_enable(void *phy_id)
94 {
95 return 0;
96 }
97
microread_i2c_disable(void * phy_id)98 static void microread_i2c_disable(void *phy_id)
99 {
100 return;
101 }
102
microread_i2c_write(void * phy_id,struct sk_buff * skb)103 static int microread_i2c_write(void *phy_id, struct sk_buff *skb)
104 {
105 int r;
106 struct microread_i2c_phy *phy = phy_id;
107 struct i2c_client *client = phy->i2c_dev;
108
109 if (phy->hard_fault != 0)
110 return phy->hard_fault;
111
112 usleep_range(3000, 6000);
113
114 microread_i2c_add_len_crc(skb);
115
116 I2C_DUMP_SKB("i2c frame written", skb);
117
118 r = i2c_master_send(client, skb->data, skb->len);
119
120 if (r == -EREMOTEIO) { /* Retry, chip was in standby */
121 usleep_range(6000, 10000);
122 r = i2c_master_send(client, skb->data, skb->len);
123 }
124
125 if (r >= 0) {
126 if (r != skb->len)
127 r = -EREMOTEIO;
128 else
129 r = 0;
130 }
131
132 microread_i2c_remove_len_crc(skb);
133
134 return r;
135 }
136
137
microread_i2c_read(struct microread_i2c_phy * phy,struct sk_buff ** skb)138 static int microread_i2c_read(struct microread_i2c_phy *phy,
139 struct sk_buff **skb)
140 {
141 int r;
142 u8 len;
143 u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1];
144 struct i2c_client *client = phy->i2c_dev;
145
146 r = i2c_master_recv(client, &len, 1);
147 if (r != 1) {
148 nfc_err(&client->dev, "cannot read len byte\n");
149 return -EREMOTEIO;
150 }
151
152 if ((len < MICROREAD_I2C_LLC_MIN_SIZE) ||
153 (len > MICROREAD_I2C_LLC_MAX_SIZE)) {
154 nfc_err(&client->dev, "invalid len byte\n");
155 r = -EBADMSG;
156 goto flush;
157 }
158
159 *skb = alloc_skb(1 + len, GFP_KERNEL);
160 if (*skb == NULL) {
161 r = -ENOMEM;
162 goto flush;
163 }
164
165 skb_put_u8(*skb, len);
166
167 r = i2c_master_recv(client, skb_put(*skb, len), len);
168 if (r != len) {
169 kfree_skb(*skb);
170 return -EREMOTEIO;
171 }
172
173 I2C_DUMP_SKB("cc frame read", *skb);
174
175 r = check_crc(*skb);
176 if (r != 0) {
177 kfree_skb(*skb);
178 r = -EBADMSG;
179 goto flush;
180 }
181
182 skb_pull(*skb, 1);
183 skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM);
184
185 usleep_range(3000, 6000);
186
187 return 0;
188
189 flush:
190 if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
191 r = -EREMOTEIO;
192
193 usleep_range(3000, 6000);
194
195 return r;
196 }
197
microread_i2c_irq_thread_fn(int irq,void * phy_id)198 static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id)
199 {
200 struct microread_i2c_phy *phy = phy_id;
201 struct sk_buff *skb = NULL;
202 int r;
203
204 if (!phy || irq != phy->i2c_dev->irq) {
205 WARN_ON_ONCE(1);
206 return IRQ_NONE;
207 }
208
209 if (phy->hard_fault != 0)
210 return IRQ_HANDLED;
211
212 r = microread_i2c_read(phy, &skb);
213 if (r == -EREMOTEIO) {
214 phy->hard_fault = r;
215
216 nfc_hci_recv_frame(phy->hdev, NULL);
217
218 return IRQ_HANDLED;
219 } else if ((r == -ENOMEM) || (r == -EBADMSG)) {
220 return IRQ_HANDLED;
221 }
222
223 nfc_hci_recv_frame(phy->hdev, skb);
224
225 return IRQ_HANDLED;
226 }
227
228 static const struct nfc_phy_ops i2c_phy_ops = {
229 .write = microread_i2c_write,
230 .enable = microread_i2c_enable,
231 .disable = microread_i2c_disable,
232 };
233
microread_i2c_probe(struct i2c_client * client,const struct i2c_device_id * id)234 static int microread_i2c_probe(struct i2c_client *client,
235 const struct i2c_device_id *id)
236 {
237 struct microread_i2c_phy *phy;
238 int r;
239
240 phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy),
241 GFP_KERNEL);
242 if (!phy)
243 return -ENOMEM;
244
245 i2c_set_clientdata(client, phy);
246 phy->i2c_dev = client;
247
248 r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn,
249 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
250 MICROREAD_I2C_DRIVER_NAME, phy);
251 if (r) {
252 nfc_err(&client->dev, "Unable to register IRQ handler\n");
253 return r;
254 }
255
256 r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
257 MICROREAD_I2C_FRAME_HEADROOM,
258 MICROREAD_I2C_FRAME_TAILROOM,
259 MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev);
260 if (r < 0)
261 goto err_irq;
262
263 return 0;
264
265 err_irq:
266 free_irq(client->irq, phy);
267
268 return r;
269 }
270
microread_i2c_remove(struct i2c_client * client)271 static int microread_i2c_remove(struct i2c_client *client)
272 {
273 struct microread_i2c_phy *phy = i2c_get_clientdata(client);
274
275 microread_remove(phy->hdev);
276
277 free_irq(client->irq, phy);
278
279 return 0;
280 }
281
282 static const struct i2c_device_id microread_i2c_id[] = {
283 { MICROREAD_I2C_DRIVER_NAME, 0},
284 { }
285 };
286 MODULE_DEVICE_TABLE(i2c, microread_i2c_id);
287
288 static struct i2c_driver microread_i2c_driver = {
289 .driver = {
290 .name = MICROREAD_I2C_DRIVER_NAME,
291 },
292 .probe = microread_i2c_probe,
293 .remove = microread_i2c_remove,
294 .id_table = microread_i2c_id,
295 };
296
297 module_i2c_driver(microread_i2c_driver);
298
299 MODULE_LICENSE("GPL");
300 MODULE_DESCRIPTION(DRIVER_DESC);
301