1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for AUO in-cell touchscreens
4 *
5 * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
6 *
7 * loosely based on auo_touch.c from Dell Streak vendor-kernel
8 *
9 * Copyright (c) 2008 QUALCOMM Incorporated.
10 * Copyright (c) 2008 QUALCOMM USA, INC.
11 */
12
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/interrupt.h>
16 #include <linux/slab.h>
17 #include <linux/input.h>
18 #include <linux/jiffies.h>
19 #include <linux/i2c.h>
20 #include <linux/mutex.h>
21 #include <linux/delay.h>
22 #include <linux/gpio.h>
23 #include <linux/input/auo-pixcir-ts.h>
24 #include <linux/of.h>
25 #include <linux/of_gpio.h>
26
27 /*
28 * Coordinate calculation:
29 * X1 = X1_LSB + X1_MSB*256
30 * Y1 = Y1_LSB + Y1_MSB*256
31 * X2 = X2_LSB + X2_MSB*256
32 * Y2 = Y2_LSB + Y2_MSB*256
33 */
34 #define AUO_PIXCIR_REG_X1_LSB 0x00
35 #define AUO_PIXCIR_REG_X1_MSB 0x01
36 #define AUO_PIXCIR_REG_Y1_LSB 0x02
37 #define AUO_PIXCIR_REG_Y1_MSB 0x03
38 #define AUO_PIXCIR_REG_X2_LSB 0x04
39 #define AUO_PIXCIR_REG_X2_MSB 0x05
40 #define AUO_PIXCIR_REG_Y2_LSB 0x06
41 #define AUO_PIXCIR_REG_Y2_MSB 0x07
42
43 #define AUO_PIXCIR_REG_STRENGTH 0x0d
44 #define AUO_PIXCIR_REG_STRENGTH_X1_LSB 0x0e
45 #define AUO_PIXCIR_REG_STRENGTH_X1_MSB 0x0f
46
47 #define AUO_PIXCIR_REG_RAW_DATA_X 0x2b
48 #define AUO_PIXCIR_REG_RAW_DATA_Y 0x4f
49
50 #define AUO_PIXCIR_REG_X_SENSITIVITY 0x6f
51 #define AUO_PIXCIR_REG_Y_SENSITIVITY 0x70
52 #define AUO_PIXCIR_REG_INT_SETTING 0x71
53 #define AUO_PIXCIR_REG_INT_WIDTH 0x72
54 #define AUO_PIXCIR_REG_POWER_MODE 0x73
55
56 #define AUO_PIXCIR_REG_VERSION 0x77
57 #define AUO_PIXCIR_REG_CALIBRATE 0x78
58
59 #define AUO_PIXCIR_REG_TOUCHAREA_X1 0x1e
60 #define AUO_PIXCIR_REG_TOUCHAREA_Y1 0x1f
61 #define AUO_PIXCIR_REG_TOUCHAREA_X2 0x20
62 #define AUO_PIXCIR_REG_TOUCHAREA_Y2 0x21
63
64 #define AUO_PIXCIR_REG_EEPROM_CALIB_X 0x42
65 #define AUO_PIXCIR_REG_EEPROM_CALIB_Y 0xad
66
67 #define AUO_PIXCIR_INT_TPNUM_MASK 0xe0
68 #define AUO_PIXCIR_INT_TPNUM_SHIFT 5
69 #define AUO_PIXCIR_INT_RELEASE (1 << 4)
70 #define AUO_PIXCIR_INT_ENABLE (1 << 3)
71 #define AUO_PIXCIR_INT_POL_HIGH (1 << 2)
72 #define AUO_PIXCIR_INT_MODE_MASK 0x03
73
74 /*
75 * Power modes:
76 * active: scan speed 60Hz
77 * sleep: scan speed 10Hz can be auto-activated, wakeup on 1st touch
78 * deep sleep: scan speed 1Hz can only be entered or left manually.
79 */
80 #define AUO_PIXCIR_POWER_ACTIVE 0x00
81 #define AUO_PIXCIR_POWER_SLEEP 0x01
82 #define AUO_PIXCIR_POWER_DEEP_SLEEP 0x02
83 #define AUO_PIXCIR_POWER_MASK 0x03
84
85 #define AUO_PIXCIR_POWER_ALLOW_SLEEP (1 << 2)
86 #define AUO_PIXCIR_POWER_IDLE_TIME(ms) ((ms & 0xf) << 4)
87
88 #define AUO_PIXCIR_CALIBRATE 0x03
89
90 #define AUO_PIXCIR_EEPROM_CALIB_X_LEN 62
91 #define AUO_PIXCIR_EEPROM_CALIB_Y_LEN 36
92
93 #define AUO_PIXCIR_RAW_DATA_X_LEN 18
94 #define AUO_PIXCIR_RAW_DATA_Y_LEN 11
95
96 #define AUO_PIXCIR_STRENGTH_ENABLE (1 << 0)
97
98 /* Touchscreen absolute values */
99 #define AUO_PIXCIR_REPORT_POINTS 2
100 #define AUO_PIXCIR_MAX_AREA 0xff
101 #define AUO_PIXCIR_PENUP_TIMEOUT_MS 10
102
103 struct auo_pixcir_ts {
104 struct i2c_client *client;
105 struct input_dev *input;
106 const struct auo_pixcir_ts_platdata *pdata;
107 char phys[32];
108
109 /* special handling for touch_indicate interupt mode */
110 bool touch_ind_mode;
111
112 wait_queue_head_t wait;
113 bool stopped;
114 };
115
116 struct auo_point_t {
117 int coord_x;
118 int coord_y;
119 int area_major;
120 int area_minor;
121 int orientation;
122 };
123
auo_pixcir_collect_data(struct auo_pixcir_ts * ts,struct auo_point_t * point)124 static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts,
125 struct auo_point_t *point)
126 {
127 struct i2c_client *client = ts->client;
128 const struct auo_pixcir_ts_platdata *pdata = ts->pdata;
129 uint8_t raw_coord[8];
130 uint8_t raw_area[4];
131 int i, ret;
132
133 /* touch coordinates */
134 ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB,
135 8, raw_coord);
136 if (ret < 0) {
137 dev_err(&client->dev, "failed to read coordinate, %d\n", ret);
138 return ret;
139 }
140
141 /* touch area */
142 ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1,
143 4, raw_area);
144 if (ret < 0) {
145 dev_err(&client->dev, "could not read touch area, %d\n", ret);
146 return ret;
147 }
148
149 for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
150 point[i].coord_x =
151 raw_coord[4 * i + 1] << 8 | raw_coord[4 * i];
152 point[i].coord_y =
153 raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2];
154
155 if (point[i].coord_x > pdata->x_max ||
156 point[i].coord_y > pdata->y_max) {
157 dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
158 point[i].coord_x, point[i].coord_y);
159 point[i].coord_x = point[i].coord_y = 0;
160 }
161
162 /* determine touch major, minor and orientation */
163 point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]);
164 point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]);
165 point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1];
166 }
167
168 return 0;
169 }
170
auo_pixcir_interrupt(int irq,void * dev_id)171 static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id)
172 {
173 struct auo_pixcir_ts *ts = dev_id;
174 const struct auo_pixcir_ts_platdata *pdata = ts->pdata;
175 struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS];
176 int i;
177 int ret;
178 int fingers = 0;
179 int abs = -1;
180
181 while (!ts->stopped) {
182
183 /* check for up event in touch touch_ind_mode */
184 if (ts->touch_ind_mode) {
185 if (gpio_get_value(pdata->gpio_int) == 0) {
186 input_mt_sync(ts->input);
187 input_report_key(ts->input, BTN_TOUCH, 0);
188 input_sync(ts->input);
189 break;
190 }
191 }
192
193 ret = auo_pixcir_collect_data(ts, point);
194 if (ret < 0) {
195 /* we want to loop only in touch_ind_mode */
196 if (!ts->touch_ind_mode)
197 break;
198
199 wait_event_timeout(ts->wait, ts->stopped,
200 msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
201 continue;
202 }
203
204 for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
205 if (point[i].coord_x > 0 || point[i].coord_y > 0) {
206 input_report_abs(ts->input, ABS_MT_POSITION_X,
207 point[i].coord_x);
208 input_report_abs(ts->input, ABS_MT_POSITION_Y,
209 point[i].coord_y);
210 input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
211 point[i].area_major);
212 input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
213 point[i].area_minor);
214 input_report_abs(ts->input, ABS_MT_ORIENTATION,
215 point[i].orientation);
216 input_mt_sync(ts->input);
217
218 /* use first finger as source for singletouch */
219 if (fingers == 0)
220 abs = i;
221
222 /* number of touch points could also be queried
223 * via i2c but would require an additional call
224 */
225 fingers++;
226 }
227 }
228
229 input_report_key(ts->input, BTN_TOUCH, fingers > 0);
230
231 if (abs > -1) {
232 input_report_abs(ts->input, ABS_X, point[abs].coord_x);
233 input_report_abs(ts->input, ABS_Y, point[abs].coord_y);
234 }
235
236 input_sync(ts->input);
237
238 /* we want to loop only in touch_ind_mode */
239 if (!ts->touch_ind_mode)
240 break;
241
242 wait_event_timeout(ts->wait, ts->stopped,
243 msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
244 }
245
246 return IRQ_HANDLED;
247 }
248
249 /*
250 * Set the power mode of the device.
251 * Valid modes are
252 * - AUO_PIXCIR_POWER_ACTIVE
253 * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch
254 * - AUO_PIXCIR_POWER_DEEP_SLEEP
255 */
auo_pixcir_power_mode(struct auo_pixcir_ts * ts,int mode)256 static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode)
257 {
258 struct i2c_client *client = ts->client;
259 int ret;
260
261 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE);
262 if (ret < 0) {
263 dev_err(&client->dev, "unable to read reg %Xh, %d\n",
264 AUO_PIXCIR_REG_POWER_MODE, ret);
265 return ret;
266 }
267
268 ret &= ~AUO_PIXCIR_POWER_MASK;
269 ret |= mode;
270
271 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret);
272 if (ret) {
273 dev_err(&client->dev, "unable to write reg %Xh, %d\n",
274 AUO_PIXCIR_REG_POWER_MODE, ret);
275 return ret;
276 }
277
278 return 0;
279 }
280
auo_pixcir_int_config(struct auo_pixcir_ts * ts,int int_setting)281 static int auo_pixcir_int_config(struct auo_pixcir_ts *ts,
282 int int_setting)
283 {
284 struct i2c_client *client = ts->client;
285 const struct auo_pixcir_ts_platdata *pdata = ts->pdata;
286 int ret;
287
288 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
289 if (ret < 0) {
290 dev_err(&client->dev, "unable to read reg %Xh, %d\n",
291 AUO_PIXCIR_REG_INT_SETTING, ret);
292 return ret;
293 }
294
295 ret &= ~AUO_PIXCIR_INT_MODE_MASK;
296 ret |= int_setting;
297 ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */
298
299 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
300 ret);
301 if (ret < 0) {
302 dev_err(&client->dev, "unable to write reg %Xh, %d\n",
303 AUO_PIXCIR_REG_INT_SETTING, ret);
304 return ret;
305 }
306
307 ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND;
308
309 return 0;
310 }
311
312 /* control the generation of interrupts on the device side */
auo_pixcir_int_toggle(struct auo_pixcir_ts * ts,bool enable)313 static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable)
314 {
315 struct i2c_client *client = ts->client;
316 int ret;
317
318 ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
319 if (ret < 0) {
320 dev_err(&client->dev, "unable to read reg %Xh, %d\n",
321 AUO_PIXCIR_REG_INT_SETTING, ret);
322 return ret;
323 }
324
325 if (enable)
326 ret |= AUO_PIXCIR_INT_ENABLE;
327 else
328 ret &= ~AUO_PIXCIR_INT_ENABLE;
329
330 ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
331 ret);
332 if (ret < 0) {
333 dev_err(&client->dev, "unable to write reg %Xh, %d\n",
334 AUO_PIXCIR_REG_INT_SETTING, ret);
335 return ret;
336 }
337
338 return 0;
339 }
340
auo_pixcir_start(struct auo_pixcir_ts * ts)341 static int auo_pixcir_start(struct auo_pixcir_ts *ts)
342 {
343 struct i2c_client *client = ts->client;
344 int ret;
345
346 ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE);
347 if (ret < 0) {
348 dev_err(&client->dev, "could not set power mode, %d\n",
349 ret);
350 return ret;
351 }
352
353 ts->stopped = false;
354 mb();
355 enable_irq(client->irq);
356
357 ret = auo_pixcir_int_toggle(ts, 1);
358 if (ret < 0) {
359 dev_err(&client->dev, "could not enable interrupt, %d\n",
360 ret);
361 disable_irq(client->irq);
362 return ret;
363 }
364
365 return 0;
366 }
367
auo_pixcir_stop(struct auo_pixcir_ts * ts)368 static int auo_pixcir_stop(struct auo_pixcir_ts *ts)
369 {
370 struct i2c_client *client = ts->client;
371 int ret;
372
373 ret = auo_pixcir_int_toggle(ts, 0);
374 if (ret < 0) {
375 dev_err(&client->dev, "could not disable interrupt, %d\n",
376 ret);
377 return ret;
378 }
379
380 /* disable receiving of interrupts */
381 disable_irq(client->irq);
382 ts->stopped = true;
383 mb();
384 wake_up(&ts->wait);
385
386 return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP);
387 }
388
auo_pixcir_input_open(struct input_dev * dev)389 static int auo_pixcir_input_open(struct input_dev *dev)
390 {
391 struct auo_pixcir_ts *ts = input_get_drvdata(dev);
392
393 return auo_pixcir_start(ts);
394 }
395
auo_pixcir_input_close(struct input_dev * dev)396 static void auo_pixcir_input_close(struct input_dev *dev)
397 {
398 struct auo_pixcir_ts *ts = input_get_drvdata(dev);
399
400 auo_pixcir_stop(ts);
401 }
402
auo_pixcir_suspend(struct device * dev)403 static int __maybe_unused auo_pixcir_suspend(struct device *dev)
404 {
405 struct i2c_client *client = to_i2c_client(dev);
406 struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
407 struct input_dev *input = ts->input;
408 int ret = 0;
409
410 mutex_lock(&input->mutex);
411
412 /* when configured as wakeup source, device should always wake system
413 * therefore start device if necessary
414 */
415 if (device_may_wakeup(&client->dev)) {
416 /* need to start device if not open, to be wakeup source */
417 if (!input_device_enabled(input)) {
418 ret = auo_pixcir_start(ts);
419 if (ret)
420 goto unlock;
421 }
422
423 enable_irq_wake(client->irq);
424 ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP);
425 } else if (input_device_enabled(input)) {
426 ret = auo_pixcir_stop(ts);
427 }
428
429 unlock:
430 mutex_unlock(&input->mutex);
431
432 return ret;
433 }
434
auo_pixcir_resume(struct device * dev)435 static int __maybe_unused auo_pixcir_resume(struct device *dev)
436 {
437 struct i2c_client *client = to_i2c_client(dev);
438 struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
439 struct input_dev *input = ts->input;
440 int ret = 0;
441
442 mutex_lock(&input->mutex);
443
444 if (device_may_wakeup(&client->dev)) {
445 disable_irq_wake(client->irq);
446
447 /* need to stop device if it was not open on suspend */
448 if (!input_device_enabled(input)) {
449 ret = auo_pixcir_stop(ts);
450 if (ret)
451 goto unlock;
452 }
453
454 /* device wakes automatically from SLEEP */
455 } else if (input_device_enabled(input)) {
456 ret = auo_pixcir_start(ts);
457 }
458
459 unlock:
460 mutex_unlock(&input->mutex);
461
462 return ret;
463 }
464
465 static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops,
466 auo_pixcir_suspend, auo_pixcir_resume);
467
468 #ifdef CONFIG_OF
auo_pixcir_parse_dt(struct device * dev)469 static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev)
470 {
471 struct auo_pixcir_ts_platdata *pdata;
472 struct device_node *np = dev->of_node;
473
474 if (!np)
475 return ERR_PTR(-ENOENT);
476
477 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
478 if (!pdata)
479 return ERR_PTR(-ENOMEM);
480
481 pdata->gpio_int = of_get_gpio(np, 0);
482 if (!gpio_is_valid(pdata->gpio_int)) {
483 dev_err(dev, "failed to get interrupt gpio\n");
484 return ERR_PTR(-EINVAL);
485 }
486
487 pdata->gpio_rst = of_get_gpio(np, 1);
488 if (!gpio_is_valid(pdata->gpio_rst)) {
489 dev_err(dev, "failed to get reset gpio\n");
490 return ERR_PTR(-EINVAL);
491 }
492
493 if (of_property_read_u32(np, "x-size", &pdata->x_max)) {
494 dev_err(dev, "failed to get x-size property\n");
495 return ERR_PTR(-EINVAL);
496 }
497
498 if (of_property_read_u32(np, "y-size", &pdata->y_max)) {
499 dev_err(dev, "failed to get y-size property\n");
500 return ERR_PTR(-EINVAL);
501 }
502
503 /* default to asserting the interrupt when the screen is touched */
504 pdata->int_setting = AUO_PIXCIR_INT_TOUCH_IND;
505
506 return pdata;
507 }
508 #else
auo_pixcir_parse_dt(struct device * dev)509 static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev)
510 {
511 return ERR_PTR(-EINVAL);
512 }
513 #endif
514
auo_pixcir_reset(void * data)515 static void auo_pixcir_reset(void *data)
516 {
517 struct auo_pixcir_ts *ts = data;
518
519 gpio_set_value(ts->pdata->gpio_rst, 0);
520 }
521
auo_pixcir_probe(struct i2c_client * client,const struct i2c_device_id * id)522 static int auo_pixcir_probe(struct i2c_client *client,
523 const struct i2c_device_id *id)
524 {
525 const struct auo_pixcir_ts_platdata *pdata;
526 struct auo_pixcir_ts *ts;
527 struct input_dev *input_dev;
528 int version;
529 int error;
530
531 pdata = dev_get_platdata(&client->dev);
532 if (!pdata) {
533 pdata = auo_pixcir_parse_dt(&client->dev);
534 if (IS_ERR(pdata))
535 return PTR_ERR(pdata);
536 }
537
538 ts = devm_kzalloc(&client->dev,
539 sizeof(struct auo_pixcir_ts), GFP_KERNEL);
540 if (!ts)
541 return -ENOMEM;
542
543 input_dev = devm_input_allocate_device(&client->dev);
544 if (!input_dev) {
545 dev_err(&client->dev, "could not allocate input device\n");
546 return -ENOMEM;
547 }
548
549 ts->pdata = pdata;
550 ts->client = client;
551 ts->input = input_dev;
552 ts->touch_ind_mode = 0;
553 ts->stopped = true;
554 init_waitqueue_head(&ts->wait);
555
556 snprintf(ts->phys, sizeof(ts->phys),
557 "%s/input0", dev_name(&client->dev));
558
559 input_dev->name = "AUO-Pixcir touchscreen";
560 input_dev->phys = ts->phys;
561 input_dev->id.bustype = BUS_I2C;
562
563 input_dev->open = auo_pixcir_input_open;
564 input_dev->close = auo_pixcir_input_close;
565
566 __set_bit(EV_ABS, input_dev->evbit);
567 __set_bit(EV_KEY, input_dev->evbit);
568
569 __set_bit(BTN_TOUCH, input_dev->keybit);
570
571 /* For single touch */
572 input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0);
573 input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0);
574
575 /* For multi touch */
576 input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
577 pdata->x_max, 0, 0);
578 input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
579 pdata->y_max, 0, 0);
580 input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
581 AUO_PIXCIR_MAX_AREA, 0, 0);
582 input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
583 AUO_PIXCIR_MAX_AREA, 0, 0);
584 input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
585
586 input_set_drvdata(ts->input, ts);
587
588 error = devm_gpio_request_one(&client->dev, pdata->gpio_int,
589 GPIOF_DIR_IN, "auo_pixcir_ts_int");
590 if (error) {
591 dev_err(&client->dev, "request of gpio %d failed, %d\n",
592 pdata->gpio_int, error);
593 return error;
594 }
595
596 error = devm_gpio_request_one(&client->dev, pdata->gpio_rst,
597 GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
598 "auo_pixcir_ts_rst");
599 if (error) {
600 dev_err(&client->dev, "request of gpio %d failed, %d\n",
601 pdata->gpio_rst, error);
602 return error;
603 }
604
605 error = devm_add_action_or_reset(&client->dev, auo_pixcir_reset, ts);
606 if (error) {
607 dev_err(&client->dev, "failed to register reset action, %d\n",
608 error);
609 return error;
610 }
611
612 msleep(200);
613
614 version = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION);
615 if (version < 0) {
616 error = version;
617 return error;
618 }
619
620 dev_info(&client->dev, "firmware version 0x%X\n", version);
621
622 error = auo_pixcir_int_config(ts, pdata->int_setting);
623 if (error)
624 return error;
625
626 error = devm_request_threaded_irq(&client->dev, client->irq,
627 NULL, auo_pixcir_interrupt,
628 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
629 input_dev->name, ts);
630 if (error) {
631 dev_err(&client->dev, "irq %d requested failed, %d\n",
632 client->irq, error);
633 return error;
634 }
635
636 /* stop device and put it into deep sleep until it is opened */
637 error = auo_pixcir_stop(ts);
638 if (error)
639 return error;
640
641 error = input_register_device(input_dev);
642 if (error) {
643 dev_err(&client->dev, "could not register input device, %d\n",
644 error);
645 return error;
646 }
647
648 i2c_set_clientdata(client, ts);
649
650 return 0;
651 }
652
653 static const struct i2c_device_id auo_pixcir_idtable[] = {
654 { "auo_pixcir_ts", 0 },
655 { }
656 };
657 MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable);
658
659 #ifdef CONFIG_OF
660 static const struct of_device_id auo_pixcir_ts_dt_idtable[] = {
661 { .compatible = "auo,auo_pixcir_ts" },
662 {},
663 };
664 MODULE_DEVICE_TABLE(of, auo_pixcir_ts_dt_idtable);
665 #endif
666
667 static struct i2c_driver auo_pixcir_driver = {
668 .driver = {
669 .name = "auo_pixcir_ts",
670 .pm = &auo_pixcir_pm_ops,
671 .of_match_table = of_match_ptr(auo_pixcir_ts_dt_idtable),
672 },
673 .probe = auo_pixcir_probe,
674 .id_table = auo_pixcir_idtable,
675 };
676
677 module_i2c_driver(auo_pixcir_driver);
678
679 MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver");
680 MODULE_LICENSE("GPL v2");
681 MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
682