1 /*
2 * Copyright 2012-15 Advanced Micro Devices, Inc.
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
21 *
22 * Authors: AMD
23 *
24 */
25
26 #include "reg_helper.h"
27
28 #include <linux/delay.h>
29 #include "core_types.h"
30 #include "link_encoder.h"
31 #include "dcn21_link_encoder.h"
32 #include "stream_encoder.h"
33
34 #include "i2caux_interface.h"
35 #include "dc_bios_types.h"
36
37 #include "gpio_service_interface.h"
38
39 #define CTX \
40 enc10->base.ctx
41 #define DC_LOGGER \
42 enc10->base.ctx->logger
43
44 #define REG(reg)\
45 (enc10->link_regs->reg)
46
47 #undef FN
48 #define FN(reg_name, field_name) \
49 enc10->link_shift->field_name, enc10->link_mask->field_name
50
51 #define IND_REG(index) \
52 (enc10->link_regs->index)
53
54 static struct mpll_cfg dcn21_mpll_cfg_ref[] = {
55 // RBR
56 {
57 .hdmimode_enable = 0,
58 .ref_range = 1,
59 .ref_clk_mpllb_div = 1,
60 .mpllb_ssc_en = 1,
61 .mpllb_div5_clk_en = 1,
62 .mpllb_multiplier = 238,
63 .mpllb_fracn_en = 0,
64 .mpllb_fracn_quot = 0,
65 .mpllb_fracn_rem = 0,
66 .mpllb_fracn_den = 1,
67 .mpllb_ssc_up_spread = 0,
68 .mpllb_ssc_peak = 44237,
69 .mpllb_ssc_stepsize = 59454,
70 .mpllb_div_clk_en = 0,
71 .mpllb_div_multiplier = 0,
72 .mpllb_hdmi_div = 0,
73 .mpllb_tx_clk_div = 2,
74 .tx_vboost_lvl = 5,
75 .mpllb_pmix_en = 1,
76 .mpllb_word_div2_en = 0,
77 .mpllb_ana_v2i = 2,
78 .mpllb_ana_freq_vco = 2,
79 .mpllb_ana_cp_int = 9,
80 .mpllb_ana_cp_prop = 15,
81 .hdmi_pixel_clk_div = 0,
82 },
83 // HBR
84 {
85 .hdmimode_enable = 0,
86 .ref_range = 1,
87 .ref_clk_mpllb_div = 1,
88 .mpllb_ssc_en = 1,
89 .mpllb_div5_clk_en = 1,
90 .mpllb_multiplier = 192,
91 .mpllb_fracn_en = 1,
92 .mpllb_fracn_quot = 32768,
93 .mpllb_fracn_rem = 0,
94 .mpllb_fracn_den = 1,
95 .mpllb_ssc_up_spread = 0,
96 .mpllb_ssc_peak = 36864,
97 .mpllb_ssc_stepsize = 49545,
98 .mpllb_div_clk_en = 0,
99 .mpllb_div_multiplier = 0,
100 .mpllb_hdmi_div = 0,
101 .mpllb_tx_clk_div = 1,
102 .tx_vboost_lvl = 5,
103 .mpllb_pmix_en = 1,
104 .mpllb_word_div2_en = 0,
105 .mpllb_ana_v2i = 2,
106 .mpllb_ana_freq_vco = 3,
107 .mpllb_ana_cp_int = 9,
108 .mpllb_ana_cp_prop = 15,
109 .hdmi_pixel_clk_div = 0,
110 },
111 //HBR2
112 {
113 .hdmimode_enable = 0,
114 .ref_range = 1,
115 .ref_clk_mpllb_div = 1,
116 .mpllb_ssc_en = 1,
117 .mpllb_div5_clk_en = 1,
118 .mpllb_multiplier = 192,
119 .mpllb_fracn_en = 1,
120 .mpllb_fracn_quot = 32768,
121 .mpllb_fracn_rem = 0,
122 .mpllb_fracn_den = 1,
123 .mpllb_ssc_up_spread = 0,
124 .mpllb_ssc_peak = 36864,
125 .mpllb_ssc_stepsize = 49545,
126 .mpllb_div_clk_en = 0,
127 .mpllb_div_multiplier = 0,
128 .mpllb_hdmi_div = 0,
129 .mpllb_tx_clk_div = 0,
130 .tx_vboost_lvl = 5,
131 .mpllb_pmix_en = 1,
132 .mpllb_word_div2_en = 0,
133 .mpllb_ana_v2i = 2,
134 .mpllb_ana_freq_vco = 3,
135 .mpllb_ana_cp_int = 9,
136 .mpllb_ana_cp_prop = 15,
137 .hdmi_pixel_clk_div = 0,
138 },
139 //HBR3
140 {
141 .hdmimode_enable = 0,
142 .ref_range = 1,
143 .ref_clk_mpllb_div = 1,
144 .mpllb_ssc_en = 1,
145 .mpllb_div5_clk_en = 1,
146 .mpllb_multiplier = 304,
147 .mpllb_fracn_en = 1,
148 .mpllb_fracn_quot = 49152,
149 .mpllb_fracn_rem = 0,
150 .mpllb_fracn_den = 1,
151 .mpllb_ssc_up_spread = 0,
152 .mpllb_ssc_peak = 55296,
153 .mpllb_ssc_stepsize = 74318,
154 .mpllb_div_clk_en = 0,
155 .mpllb_div_multiplier = 0,
156 .mpllb_hdmi_div = 0,
157 .mpllb_tx_clk_div = 0,
158 .tx_vboost_lvl = 5,
159 .mpllb_pmix_en = 1,
160 .mpllb_word_div2_en = 0,
161 .mpllb_ana_v2i = 2,
162 .mpllb_ana_freq_vco = 1,
163 .mpllb_ana_cp_int = 7,
164 .mpllb_ana_cp_prop = 16,
165 .hdmi_pixel_clk_div = 0,
166 },
167 };
168
169
update_cfg_data(struct dcn10_link_encoder * enc10,const struct dc_link_settings * link_settings,struct dpcssys_phy_seq_cfg * cfg)170 static bool update_cfg_data(
171 struct dcn10_link_encoder *enc10,
172 const struct dc_link_settings *link_settings,
173 struct dpcssys_phy_seq_cfg *cfg)
174 {
175 int i;
176
177 cfg->load_sram_fw = false;
178 cfg->use_calibration_setting = true;
179
180 //TODO: need to implement a proper lane mapping for Renoir.
181 for (i = 0; i < 4; i++)
182 cfg->lane_en[i] = true;
183
184 switch (link_settings->link_rate) {
185 case LINK_RATE_LOW:
186 cfg->mpll_cfg = dcn21_mpll_cfg_ref[0];
187 break;
188 case LINK_RATE_HIGH:
189 cfg->mpll_cfg = dcn21_mpll_cfg_ref[1];
190 break;
191 case LINK_RATE_HIGH2:
192 cfg->mpll_cfg = dcn21_mpll_cfg_ref[2];
193 break;
194 case LINK_RATE_HIGH3:
195 cfg->mpll_cfg = dcn21_mpll_cfg_ref[3];
196 break;
197 default:
198 DC_LOG_ERROR("%s: No supported link rate found %X!\n",
199 __func__, link_settings->link_rate);
200 return false;
201 }
202
203 return true;
204 }
205
dcn21_link_encoder_acquire_phy(struct link_encoder * enc)206 static bool dcn21_link_encoder_acquire_phy(struct link_encoder *enc)
207 {
208 struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
209 int value;
210
211 if (enc->features.flags.bits.DP_IS_USB_C) {
212 REG_GET(RDPCSTX_PHY_CNTL6,
213 RDPCS_PHY_DPALT_DISABLE, &value);
214
215 if (value == 1) {
216 ASSERT(0);
217 return false;
218 }
219 REG_UPDATE(RDPCSTX_PHY_CNTL6,
220 RDPCS_PHY_DPALT_DISABLE_ACK, 0);
221
222 udelay(40);
223
224 REG_GET(RDPCSTX_PHY_CNTL6,
225 RDPCS_PHY_DPALT_DISABLE, &value);
226 if (value == 1) {
227 ASSERT(0);
228 REG_UPDATE(RDPCSTX_PHY_CNTL6,
229 RDPCS_PHY_DPALT_DISABLE_ACK, 1);
230 return false;
231 }
232 }
233
234 REG_UPDATE(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DP_REF_CLK_EN, 1);
235
236 return true;
237 }
238
239
240
dcn21_link_encoder_release_phy(struct link_encoder * enc)241 static void dcn21_link_encoder_release_phy(struct link_encoder *enc)
242 {
243 struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
244
245 if (enc->features.flags.bits.DP_IS_USB_C) {
246 REG_UPDATE(RDPCSTX_PHY_CNTL6,
247 RDPCS_PHY_DPALT_DISABLE_ACK, 1);
248 }
249
250 REG_UPDATE(RDPCSTX_PHY_CNTL6, RDPCS_PHY_DP_REF_CLK_EN, 0);
251
252 }
253
dcn21_link_encoder_enable_dp_output(struct link_encoder * enc,const struct dc_link_settings * link_settings,enum clock_source_id clock_source)254 void dcn21_link_encoder_enable_dp_output(
255 struct link_encoder *enc,
256 const struct dc_link_settings *link_settings,
257 enum clock_source_id clock_source)
258 {
259 struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
260 struct dcn21_link_encoder *enc21 = (struct dcn21_link_encoder *) enc10;
261 struct dpcssys_phy_seq_cfg *cfg = &enc21->phy_seq_cfg;
262
263 if (!dcn21_link_encoder_acquire_phy(enc))
264 return;
265
266 if (!enc->ctx->dc->debug.avoid_vbios_exec_table) {
267 dcn10_link_encoder_enable_dp_output(enc, link_settings, clock_source);
268 return;
269 }
270
271 if (!update_cfg_data(enc10, link_settings, cfg))
272 return;
273
274 enc1_configure_encoder(enc10, link_settings);
275
276 dcn10_link_encoder_setup(enc, SIGNAL_TYPE_DISPLAY_PORT);
277
278 }
279
dcn21_link_encoder_enable_dp_mst_output(struct link_encoder * enc,const struct dc_link_settings * link_settings,enum clock_source_id clock_source)280 static void dcn21_link_encoder_enable_dp_mst_output(
281 struct link_encoder *enc,
282 const struct dc_link_settings *link_settings,
283 enum clock_source_id clock_source)
284 {
285 if (!dcn21_link_encoder_acquire_phy(enc))
286 return;
287
288 dcn10_link_encoder_enable_dp_mst_output(enc, link_settings, clock_source);
289 }
290
dcn21_link_encoder_disable_output(struct link_encoder * enc,enum signal_type signal)291 static void dcn21_link_encoder_disable_output(struct link_encoder *enc,
292 enum signal_type signal)
293 {
294 dcn10_link_encoder_disable_output(enc, signal);
295
296 if (dc_is_dp_signal(signal))
297 dcn21_link_encoder_release_phy(enc);
298 }
299
300
301 static const struct link_encoder_funcs dcn21_link_enc_funcs = {
302 .read_state = link_enc2_read_state,
303 .validate_output_with_stream =
304 dcn10_link_encoder_validate_output_with_stream,
305 .hw_init = enc2_hw_init,
306 .setup = dcn10_link_encoder_setup,
307 .enable_tmds_output = dcn10_link_encoder_enable_tmds_output,
308 .enable_dp_output = dcn21_link_encoder_enable_dp_output,
309 .enable_dp_mst_output = dcn21_link_encoder_enable_dp_mst_output,
310 .disable_output = dcn21_link_encoder_disable_output,
311 .dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
312 .dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
313 .update_mst_stream_allocation_table =
314 dcn10_link_encoder_update_mst_stream_allocation_table,
315 .psr_program_dp_dphy_fast_training =
316 dcn10_psr_program_dp_dphy_fast_training,
317 .psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
318 .connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
319 .enable_hpd = dcn10_link_encoder_enable_hpd,
320 .disable_hpd = dcn10_link_encoder_disable_hpd,
321 .is_dig_enabled = dcn10_is_dig_enabled,
322 .destroy = dcn10_link_encoder_destroy,
323 .fec_set_enable = enc2_fec_set_enable,
324 .fec_set_ready = enc2_fec_set_ready,
325 .fec_is_active = enc2_fec_is_active,
326 .get_dig_frontend = dcn10_get_dig_frontend,
327 .is_in_alt_mode = dcn20_link_encoder_is_in_alt_mode,
328 .get_max_link_cap = dcn20_link_encoder_get_max_link_cap,
329 };
330
dcn21_link_encoder_construct(struct dcn21_link_encoder * enc21,const struct encoder_init_data * init_data,const struct encoder_feature_support * enc_features,const struct dcn10_link_enc_registers * link_regs,const struct dcn10_link_enc_aux_registers * aux_regs,const struct dcn10_link_enc_hpd_registers * hpd_regs,const struct dcn10_link_enc_shift * link_shift,const struct dcn10_link_enc_mask * link_mask)331 void dcn21_link_encoder_construct(
332 struct dcn21_link_encoder *enc21,
333 const struct encoder_init_data *init_data,
334 const struct encoder_feature_support *enc_features,
335 const struct dcn10_link_enc_registers *link_regs,
336 const struct dcn10_link_enc_aux_registers *aux_regs,
337 const struct dcn10_link_enc_hpd_registers *hpd_regs,
338 const struct dcn10_link_enc_shift *link_shift,
339 const struct dcn10_link_enc_mask *link_mask)
340 {
341 struct bp_encoder_cap_info bp_cap_info = {0};
342 const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
343 enum bp_result result = BP_RESULT_OK;
344 struct dcn10_link_encoder *enc10 = &enc21->enc10;
345
346 enc10->base.funcs = &dcn21_link_enc_funcs;
347 enc10->base.ctx = init_data->ctx;
348 enc10->base.id = init_data->encoder;
349
350 enc10->base.hpd_source = init_data->hpd_source;
351 enc10->base.connector = init_data->connector;
352
353 enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
354
355 enc10->base.features = *enc_features;
356
357 enc10->base.transmitter = init_data->transmitter;
358
359 /* set the flag to indicate whether driver poll the I2C data pin
360 * while doing the DP sink detect
361 */
362
363 /* if (dal_adapter_service_is_feature_supported(as,
364 FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
365 enc10->base.features.flags.bits.
366 DP_SINK_DETECT_POLL_DATA_PIN = true;*/
367
368 enc10->base.output_signals =
369 SIGNAL_TYPE_DVI_SINGLE_LINK |
370 SIGNAL_TYPE_DVI_DUAL_LINK |
371 SIGNAL_TYPE_LVDS |
372 SIGNAL_TYPE_DISPLAY_PORT |
373 SIGNAL_TYPE_DISPLAY_PORT_MST |
374 SIGNAL_TYPE_EDP |
375 SIGNAL_TYPE_HDMI_TYPE_A;
376
377 /* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
378 * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
379 * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
380 * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
381 * Prefer DIG assignment is decided by board design.
382 * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
383 * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
384 * By this, adding DIGG should not hurt DCE 8.0.
385 * This will let DCE 8.1 share DCE 8.0 as much as possible
386 */
387
388 enc10->link_regs = link_regs;
389 enc10->aux_regs = aux_regs;
390 enc10->hpd_regs = hpd_regs;
391 enc10->link_shift = link_shift;
392 enc10->link_mask = link_mask;
393
394 switch (enc10->base.transmitter) {
395 case TRANSMITTER_UNIPHY_A:
396 enc10->base.preferred_engine = ENGINE_ID_DIGA;
397 break;
398 case TRANSMITTER_UNIPHY_B:
399 enc10->base.preferred_engine = ENGINE_ID_DIGB;
400 break;
401 case TRANSMITTER_UNIPHY_C:
402 enc10->base.preferred_engine = ENGINE_ID_DIGC;
403 break;
404 case TRANSMITTER_UNIPHY_D:
405 enc10->base.preferred_engine = ENGINE_ID_DIGD;
406 break;
407 case TRANSMITTER_UNIPHY_E:
408 enc10->base.preferred_engine = ENGINE_ID_DIGE;
409 break;
410 case TRANSMITTER_UNIPHY_F:
411 enc10->base.preferred_engine = ENGINE_ID_DIGF;
412 break;
413 case TRANSMITTER_UNIPHY_G:
414 enc10->base.preferred_engine = ENGINE_ID_DIGG;
415 break;
416 default:
417 ASSERT_CRITICAL(false);
418 enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
419 }
420
421 /* default to one to mirror Windows behavior */
422 enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
423
424 result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
425 enc10->base.id, &bp_cap_info);
426
427 /* Override features with DCE-specific values */
428 if (result == BP_RESULT_OK) {
429 enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
430 bp_cap_info.DP_HBR2_EN;
431 enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
432 bp_cap_info.DP_HBR3_EN;
433 enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
434 enc10->base.features.flags.bits.DP_IS_USB_C =
435 bp_cap_info.DP_IS_USB_C;
436 } else {
437 DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
438 __func__,
439 result);
440 }
441 if (enc10->base.ctx->dc->debug.hdmi20_disable) {
442 enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
443 }
444 }
445