1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * MPC885 ADS Device Tree Source
4 *
5 * Copyright 2006 MontaVista Software, Inc.
6 * Copyright 2007,2008 Freescale Semiconductor, Inc.
7 */
8
9/dts-v1/;
10
11/ {
12	model = "MPC885ADS";
13	compatible = "fsl,mpc885ads";
14	#address-cells = <1>;
15	#size-cells = <1>;
16
17	cpus {
18		#address-cells = <1>;
19		#size-cells = <0>;
20
21		PowerPC,885@0 {
22			device_type = "cpu";
23			reg = <0x0>;
24			d-cache-line-size = <16>;
25			i-cache-line-size = <16>;
26			d-cache-size = <8192>;
27			i-cache-size = <8192>;
28			timebase-frequency = <0>;
29			bus-frequency = <0>;
30			clock-frequency = <0>;
31			interrupts = <15 2>;	// decrementer interrupt
32			interrupt-parent = <&PIC>;
33		};
34	};
35
36	memory {
37		device_type = "memory";
38		reg = <0x0 0x0>;
39	};
40
41	localbus@ff000100 {
42		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
43		#address-cells = <2>;
44		#size-cells = <1>;
45		reg = <0xff000100 0x40>;
46
47		ranges = <
48			0x0 0x0 0xfe000000 0x800000
49			0x1 0x0 0xff080000 0x8000
50			0x5 0x0 0xff0a0000 0x8000
51		>;
52
53		flash@0,0 {
54			compatible = "jedec-flash";
55			reg = <0x0 0x0 0x800000>;
56			bank-width = <4>;
57			device-width = <1>;
58		};
59
60		board-control@1,0 {
61			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
62			compatible = "fsl,mpc885ads-bcsr";
63		};
64	};
65
66	soc@ff000000 {
67		compatible = "fsl,mpc885", "fsl,pq1-soc";
68		#address-cells = <1>;
69		#size-cells = <1>;
70		device_type = "soc";
71		ranges = <0x0 0xff000000 0x28000>;
72		bus-frequency = <0>;
73
74		// Temporary -- will go away once kernel uses ranges for get_immrbase().
75		reg = <0xff000000 0x4000>;
76
77		mdio@e00 {
78			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
79			reg = <0xe00 0x188>;
80			#address-cells = <1>;
81			#size-cells = <0>;
82
83			PHY0: ethernet-phy@0 {
84				reg = <0x0>;
85			};
86
87			PHY1: ethernet-phy@1 {
88				reg = <0x1>;
89			};
90
91			PHY2: ethernet-phy@2 {
92				reg = <0x2>;
93			};
94		};
95
96		ethernet@e00 {
97			device_type = "network";
98			compatible = "fsl,mpc885-fec-enet",
99			             "fsl,pq1-fec-enet";
100			reg = <0xe00 0x188>;
101			local-mac-address = [ 00 00 00 00 00 00 ];
102			interrupts = <3 1>;
103			interrupt-parent = <&PIC>;
104			phy-handle = <&PHY0>;
105			linux,network-index = <0>;
106		};
107
108		ethernet@1e00 {
109			device_type = "network";
110			compatible = "fsl,mpc885-fec-enet",
111			             "fsl,pq1-fec-enet";
112			reg = <0x1e00 0x188>;
113			local-mac-address = [ 00 00 00 00 00 00 ];
114			interrupts = <7 1>;
115			interrupt-parent = <&PIC>;
116			phy-handle = <&PHY1>;
117			linux,network-index = <1>;
118		};
119
120		PIC: interrupt-controller@0 {
121			interrupt-controller;
122			#interrupt-cells = <2>;
123			reg = <0x0 0x24>;
124			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
125		};
126
127		pcmcia@80 {
128			#address-cells = <3>;
129			#interrupt-cells = <1>;
130			#size-cells = <2>;
131			compatible = "fsl,pq-pcmcia";
132			device_type = "pcmcia";
133			reg = <0x80 0x80>;
134			interrupt-parent = <&PIC>;
135			interrupts = <13 1>;
136		};
137
138		cpm@9c0 {
139			#address-cells = <1>;
140			#size-cells = <1>;
141			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
142			command-proc = <0x9c0>;
143			interrupts = <0>;	// cpm error interrupt
144			interrupt-parent = <&CPM_PIC>;
145			reg = <0x9c0 0x40>;
146			ranges;
147
148			muram@2000 {
149				#address-cells = <1>;
150				#size-cells = <1>;
151				ranges = <0x0 0x2000 0x2000>;
152
153				data@0 {
154					compatible = "fsl,cpm-muram-data";
155					reg = <0x0 0x1c00>;
156				};
157			};
158
159			brg@9f0 {
160				compatible = "fsl,mpc885-brg",
161				             "fsl,cpm1-brg",
162				             "fsl,cpm-brg";
163				clock-frequency = <0>;
164				reg = <0x9f0 0x10>;
165			};
166
167			CPM_PIC: interrupt-controller@930 {
168				interrupt-controller;
169				#interrupt-cells = <1>;
170				interrupts = <5 2 0 2>;
171				interrupt-parent = <&PIC>;
172				reg = <0x930 0x20>;
173				compatible = "fsl,mpc885-cpm-pic",
174				             "fsl,cpm1-pic";
175			};
176
177			serial@a80 {
178				device_type = "serial";
179				compatible = "fsl,mpc885-smc-uart",
180				             "fsl,cpm1-smc-uart";
181				reg = <0xa80 0x10 0x3e80 0x40>;
182				interrupts = <4>;
183				interrupt-parent = <&CPM_PIC>;
184				fsl,cpm-brg = <1>;
185				fsl,cpm-command = <0x90>;
186			};
187
188			serial@a90 {
189				device_type = "serial";
190				compatible = "fsl,mpc885-smc-uart",
191				             "fsl,cpm1-smc-uart";
192				reg = <0xa90 0x10 0x3f80 0x40>;
193				interrupts = <3>;
194				interrupt-parent = <&CPM_PIC>;
195				fsl,cpm-brg = <2>;
196				fsl,cpm-command = <0xd0>;
197			};
198
199			ethernet@a40 {
200				device_type = "network";
201				compatible = "fsl,mpc885-scc-enet",
202				             "fsl,cpm1-scc-enet";
203				reg = <0xa40 0x18 0x3e00 0x100>;
204				local-mac-address = [ 00 00 00 00 00 00 ];
205				interrupts = <28>;
206				interrupt-parent = <&CPM_PIC>;
207				phy-handle = <&PHY2>;
208				fsl,cpm-command = <0x80>;
209				linux,network-index = <2>;
210			};
211
212			i2c@860 {
213				compatible = "fsl,mpc885-i2c",
214					     "fsl,cpm1-i2c";
215				reg = <0x860 0x20 0x3c80 0x30>;
216				interrupts = <16>;
217				interrupt-parent = <&CPM_PIC>;
218				fsl,cpm-command = <0x10>;
219				#address-cells = <1>;
220				#size-cells = <0>;
221			};
222		};
223
224		crypto@20000 {
225			compatible = "fsl,sec1.2", "fsl,sec1.0";
226			reg = <0x20000 0x8000>;
227			interrupts = <1 1>;
228			interrupt-parent = <&PIC>;
229			fsl,num-channels = <1>;
230			fsl,channel-fifo-len = <24>;
231			fsl,exec-units-mask = <0x4c>;
232			fsl,descriptor-types-mask = <0x05000154>;
233		};
234	};
235
236	chosen {
237		stdout-path = "/soc/cpm/serial@a80";
238	};
239};
240