1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * SGI IP30 miscellaneous setup bits.
4 *
5 * Copyright (C) 2004-2007 Stanislaw Skowronek <skylark@unaligned.org>
6 * 2007 Joshua Kinard <kumba@gentoo.org>
7 * 2009 Johannes Dickgreber <tanzy@gmx.de>
8 */
9
10 #include <linux/init.h>
11 #include <linux/io.h>
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/percpu.h>
15 #include <linux/memblock.h>
16
17 #include <asm/smp-ops.h>
18 #include <asm/sgialib.h>
19 #include <asm/time.h>
20 #include <asm/sgi/heart.h>
21
22 #include "ip30-common.h"
23
24 /* Structure of accessible HEART registers located in XKPHYS space. */
25 struct ip30_heart_regs __iomem *heart_regs = HEART_XKPHYS_BASE;
26
27 /*
28 * ARCS will report up to the first 1GB of
29 * memory if queried. Anything beyond that
30 * is marked as reserved.
31 */
32 #define IP30_MAX_PROM_MEMORY _AC(0x40000000, UL)
33
34 /*
35 * Memory in the Octane starts at 512MB
36 */
37 #define IP30_MEMORY_BASE _AC(0x20000000, UL)
38
39 /*
40 * If using ARCS to probe for memory, then
41 * remaining memory will start at this offset.
42 */
43 #define IP30_REAL_MEMORY_START (IP30_MEMORY_BASE + IP30_MAX_PROM_MEMORY)
44
45 #define MEM_SHIFT(x) ((x) >> 20)
46
ip30_mem_init(void)47 static void __init ip30_mem_init(void)
48 {
49 unsigned long total_mem;
50 phys_addr_t addr;
51 phys_addr_t size;
52 u32 memcfg;
53 int i;
54
55 total_mem = 0;
56 for (i = 0; i < HEART_MEMORY_BANKS; i++) {
57 memcfg = __raw_readl(&heart_regs->mem_cfg.l[i]);
58 if (!(memcfg & HEART_MEMCFG_VALID))
59 continue;
60
61 addr = memcfg & HEART_MEMCFG_ADDR_MASK;
62 addr <<= HEART_MEMCFG_UNIT_SHIFT;
63 addr += IP30_MEMORY_BASE;
64 size = memcfg & HEART_MEMCFG_SIZE_MASK;
65 size >>= HEART_MEMCFG_SIZE_SHIFT;
66 size += 1;
67 size <<= HEART_MEMCFG_UNIT_SHIFT;
68
69 total_mem += size;
70
71 if (addr >= IP30_REAL_MEMORY_START)
72 memblock_phys_free(addr, size);
73 else if ((addr + size) > IP30_REAL_MEMORY_START)
74 memblock_phys_free(IP30_REAL_MEMORY_START,
75 size - IP30_MAX_PROM_MEMORY);
76 }
77 pr_info("Detected %luMB of physical memory.\n", MEM_SHIFT(total_mem));
78 }
79
80 /**
81 * ip30_cpu_time_init - platform time initialization.
82 */
ip30_cpu_time_init(void)83 static void __init ip30_cpu_time_init(void)
84 {
85 int cpu = smp_processor_id();
86 u64 heart_compare;
87 unsigned int start, end;
88 int time_diff;
89
90 heart_compare = (heart_read(&heart_regs->count) +
91 (HEART_CYCLES_PER_SEC / 10));
92 start = read_c0_count();
93 while ((heart_read(&heart_regs->count) - heart_compare) & 0x800000)
94 cpu_relax();
95
96 end = read_c0_count();
97 time_diff = (int)end - (int)start;
98 mips_hpt_frequency = time_diff * 10;
99 pr_info("IP30: CPU%d: %d MHz CPU detected.\n", cpu,
100 (mips_hpt_frequency * 2) / 1000000);
101 }
102
ip30_per_cpu_init(void)103 void __init ip30_per_cpu_init(void)
104 {
105 /* Disable all interrupts. */
106 clear_c0_status(ST0_IM);
107
108 ip30_cpu_time_init();
109 #ifdef CONFIG_SMP
110 ip30_install_ipi();
111 #endif
112
113 enable_percpu_irq(IP30_HEART_L0_IRQ, IRQ_TYPE_NONE);
114 enable_percpu_irq(IP30_HEART_L1_IRQ, IRQ_TYPE_NONE);
115 enable_percpu_irq(IP30_HEART_L2_IRQ, IRQ_TYPE_NONE);
116 enable_percpu_irq(IP30_HEART_ERR_IRQ, IRQ_TYPE_NONE);
117 }
118
119 /**
120 * plat_mem_setup - despite the name, misc setup happens here.
121 */
plat_mem_setup(void)122 void __init plat_mem_setup(void)
123 {
124 ip30_mem_init();
125
126 /* XXX: Hard lock on /sbin/init if this flag isn't specified. */
127 prom_flags |= PROM_FLAG_DONT_FREE_TEMP;
128
129 #ifdef CONFIG_SMP
130 register_smp_ops(&ip30_smp_ops);
131 #else
132 ip30_per_cpu_init();
133 #endif
134
135 ioport_resource.start = 0;
136 ioport_resource.end = ~0UL;
137 set_io_port_base(IO_BASE);
138 }
139