1 // SPDX-License-Identifier: GPL-2.0
2 /***************************************************************************/
3 
4 /*
5  *	m5272.c  -- platform support for ColdFire 5272 based boards
6  *
7  *	Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
8  *	Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
9  */
10 
11 /***************************************************************************/
12 
13 #include <linux/clkdev.h>
14 #include <linux/kernel.h>
15 #include <linux/param.h>
16 #include <linux/init.h>
17 #include <linux/io.h>
18 #include <linux/phy.h>
19 #include <linux/phy_fixed.h>
20 #include <asm/machdep.h>
21 #include <asm/coldfire.h>
22 #include <asm/mcfsim.h>
23 #include <asm/mcfuart.h>
24 #include <asm/mcfclk.h>
25 
26 /***************************************************************************/
27 
28 /*
29  *	Some platforms need software versions of the GPIO data registers.
30  */
31 unsigned short ppdata;
32 unsigned char ledbank = 0xff;
33 
34 /***************************************************************************/
35 
36 DEFINE_CLK(pll, "pll.0", MCF_CLK);
37 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
38 
39 static struct clk_lookup m5272_clk_lookup[] = {
40 	CLKDEV_INIT(NULL, "pll.0", &clk_pll),
41 	CLKDEV_INIT(NULL, "sys.0", &clk_sys),
42 	CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
43 	CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),
44 	CLKDEV_INIT("mcftmr.2", NULL, &clk_sys),
45 	CLKDEV_INIT("mcftmr.3", NULL, &clk_sys),
46 	CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
47 	CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
48 	CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys),
49 	CLKDEV_INIT("fec.0", NULL, &clk_sys),
50 };
51 
52 /***************************************************************************/
53 
m5272_uarts_init(void)54 static void __init m5272_uarts_init(void)
55 {
56 	u32 v;
57 
58 	/* Enable the output lines for the serial ports */
59 	v = readl(MCFSIM_PBCNT);
60 	v = (v & ~0x000000ff) | 0x00000055;
61 	writel(v, MCFSIM_PBCNT);
62 
63 	v = readl(MCFSIM_PDCNT);
64 	v = (v & ~0x000003fc) | 0x000002a8;
65 	writel(v, MCFSIM_PDCNT);
66 }
67 
68 /***************************************************************************/
69 
m5272_cpu_reset(void)70 static void m5272_cpu_reset(void)
71 {
72 	local_irq_disable();
73 	/* Set watchdog to reset, and enabled */
74 	__raw_writew(0, MCFSIM_WIRR);
75 	__raw_writew(1, MCFSIM_WRRR);
76 	__raw_writew(0, MCFSIM_WCR);
77 	for (;;)
78 		/* wait for watchdog to timeout */;
79 }
80 
81 /***************************************************************************/
82 
config_BSP(char * commandp,int size)83 void __init config_BSP(char *commandp, int size)
84 {
85 #if defined (CONFIG_MOD5272)
86 	/* Set base of device vectors to be 64 */
87 	writeb(0x40, MCFSIM_PIVR);
88 #endif
89 
90 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
91 	/* Copy command line from FLASH to local buffer... */
92 	memcpy(commandp, (char *) 0xf0004000, size);
93 	commandp[size-1] = 0;
94 #elif defined(CONFIG_CANCam)
95 	/* Copy command line from FLASH to local buffer... */
96 	memcpy(commandp, (char *) 0xf0010000, size);
97 	commandp[size-1] = 0;
98 #endif
99 
100 	mach_reset = m5272_cpu_reset;
101 	mach_sched_init = hw_timer_init;
102 }
103 
104 /***************************************************************************/
105 
106 /*
107  * Some 5272 based boards have the FEC ethernet directly connected to
108  * an ethernet switch. In this case we need to use the fixed phy type,
109  * and we need to declare it early in boot.
110  */
111 static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
112 	.link	= 1,
113 	.speed	= 100,
114 	.duplex	= 0,
115 };
116 
117 /***************************************************************************/
118 
init_BSP(void)119 static int __init init_BSP(void)
120 {
121 	m5272_uarts_init();
122 	fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
123 	clkdev_add_table(m5272_clk_lookup, ARRAY_SIZE(m5272_clk_lookup));
124 	return 0;
125 }
126 
127 arch_initcall(init_BSP);
128 
129 /***************************************************************************/
130