1// SPDX-License-Identifier: BSD-3-Clause 2/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ 3 4#include <dt-bindings/iio/qcom,spmi-vadc.h> 5#include <dt-bindings/interrupt-controller/irq.h> 6#include <dt-bindings/input/linux-event-codes.h> 7#include <dt-bindings/spmi/spmi.h> 8 9&spmi_bus { 10 pmic@0 { 11 compatible = "qcom,pm8953", "qcom,spmi-pmic"; 12 reg = <0 SPMI_USID>; 13 #address-cells = <1>; 14 #size-cells = <0>; 15 16 pm8953_pon: pon@800 { 17 compatible = "qcom,pm8916-pon"; 18 reg = <0x800>; 19 mode-bootloader = <0x2>; 20 mode-recovery = <0x1>; 21 22 pwrkey { 23 compatible = "qcom,pm8941-pwrkey"; 24 interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>; 25 debounce = <15625>; 26 bias-pull-up; 27 linux,code = <KEY_POWER>; 28 }; 29 30 pm8953_resin: resin { 31 compatible = "qcom,pm8941-resin"; 32 interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>; 33 debounce = <15625>; 34 bias-pull-up; 35 status = "disabled"; 36 }; 37 }; 38 39 temp-alarm@2400 { 40 compatible = "qcom,spmi-temp-alarm"; 41 reg = <0x2400>; 42 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; 43 io-channels = <&pm8953_vadc VADC_DIE_TEMP>; 44 io-channel-names = "thermal"; 45 #thermal-sensor-cells = <0>; 46 }; 47 48 pm8953_vadc: vadc@3100 { 49 compatible = "qcom,spmi-vadc"; 50 reg = <0x3100>; 51 interrupts = <0x00 0x31 0x00 0x01>; 52 #address-cells = <1>; 53 #size-cells = <0>; 54 #io-channel-cells = <1>; 55 56 adc-chan@8 { 57 reg = <VADC_DIE_TEMP>; 58 }; 59 adc-chan@9 { 60 reg = <VADC_REF_625MV>; 61 }; 62 adc-chan@a { 63 reg = <VADC_REF_1250MV>; 64 }; 65 adc-chan@c { 66 reg = <VADC_SPARE1>; 67 }; 68 adc-chan@e { 69 reg = <VADC_GND_REF>; 70 }; 71 adc-chan@f { 72 reg = <VADC_VDD_VADC>; 73 }; 74 }; 75 76 rtc@6000 { 77 compatible = "qcom,pm8941-rtc"; 78 reg = <0x6000>, <0x6100>; 79 reg-names = "rtc", "alarm"; 80 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 81 }; 82 }; 83 84 pmic@1 { 85 compatible = "qcom,pm8953", "qcom,spmi-pmic"; 86 reg = <1 SPMI_USID>; 87 #address-cells = <1>; 88 #size-cells = <0>; 89 }; 90}; 91