1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8	model = "MPL CEC4";
9	compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood";
10
11        memory {
12                device_type = "memory";
13                reg = <0x00000000 0x20000000>;
14        };
15
16	chosen {
17		bootargs = "console=ttyS0,115200n8 earlyprintk";
18		stdout-path = &uart0;
19	};
20
21	ocp@f1000000 {
22		pinctrl: pin-controller@10000 {
23			pmx_led_health: pmx-led-health {
24				marvell,pins = "mpp7";
25				marvell,function = "gpo";
26			};
27
28			pmx_sata1: pmx-sata1 {
29				marvell,pins = "mpp34";
30				marvell,function = "sata1";
31			};
32
33			pmx_sata0: pmx-sata0 {
34				marvell,pins = "mpp35";
35				marvell,function = "sata0";
36			};
37
38			pmx_led_user1o: pmx-led-user1o {
39				marvell,pins = "mpp40";
40				marvell,function = "gpio";
41			};
42
43			pmx_led_user1g: pmx-led-user1g {
44				marvell,pins = "mpp41";
45				marvell,function = "gpio";
46			};
47
48			pmx_led_user0o: pmx-led-user0o {
49				marvell,pins = "mpp44";
50				marvell,function = "gpio";
51			};
52
53			pmx_led_user0g: pmx-led-user0g {
54				marvell,pins = "mpp45";
55				marvell,function = "gpio";
56			};
57
58			pmx_led_misc: pmx-led-misc {
59				marvell,pins = "mpp46";
60				marvell,function = "gpio";
61			};
62
63			pmx_sdio_cd: pmx-sdio-cd {
64				marvell,pins = "mpp47";
65				marvell,function = "gpio";
66			};
67		};
68
69                i2c@11000 {
70                        status = "okay";
71
72			rtc@51 {
73				compatible = "nxp,pcf8563";
74				reg = <0x51>;
75			};
76
77			eeprom@57 {
78				compatible = "atmel,24c02";
79				reg = <0x57>;
80			};
81
82                };
83
84		serial@12000 {
85			status = "okay";
86		};
87
88		rtc@10300 {
89			status = "disabled";
90		};
91
92		sata@80000 {
93			pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
94			pinctrl-names = "default";
95			nr-ports = <2>;
96			status = "okay";
97		};
98
99		mvsdio@90000 {
100			pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>;
101			pinctrl-names = "default";
102			status = "okay";
103			cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
104			/* No WP GPIO */
105		};
106	};
107
108	gpio-leds {
109		compatible = "gpio-leds";
110		pinctrl-0 = < &pmx_led_health
111			      &pmx_led_user1o
112			      &pmx_led_user1g &pmx_led_user0o
113			      &pmx_led_user0g &pmx_led_misc
114			    >;
115		pinctrl-names = "default";
116
117		health {
118			label = "status:green:health";
119			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
120		};
121
122		user1o {
123			label = "user1:orange";
124			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
125			default-state = "on";
126		};
127
128		user1g {
129			label = "user1:green";
130			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
131			default-state = "on";
132		};
133
134		user0o {
135			label = "user0:orange";
136			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
137			default-state = "on";
138		};
139
140		user0g {
141			label = "user0:green";
142			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
143			default-state = "on";
144		};
145
146		misc {
147			label = "status:orange:misc";
148			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
149			default-state = "on";
150		};
151
152	};
153};
154
155&nand {
156	status = "okay";
157
158	partition@0 {
159		label = "uboot";
160		reg = <0x0000000 0x100000>;
161	};
162
163	partition@100000 {
164		label = "env";
165		reg = <0x100000 0x80000>;
166	};
167
168	partition@180000 {
169		label = "fdt";
170		reg = <0x180000 0x80000>;
171	};
172
173	partition@200000 {
174		label = "kernel";
175		reg = <0x200000 0x400000>;
176	};
177
178	partition@600000 {
179		label = "rootfs";
180		reg = <0x600000 0x1fa00000>;
181	};
182};
183
184&mdio {
185	status = "okay";
186
187	ethphy0: ethernet-phy@1 {
188		reg = <1>;
189	};
190
191	ethphy1: ethernet-phy@2 {
192		reg = <2>;
193	};
194};
195
196&eth0 {
197	status = "okay";
198	ethernet0-port@0 {
199		phy-handle = <&ethphy0>;
200	};
201};
202
203&eth1 {
204	status = "okay";
205	ethernet1-port@0 {
206		phy-handle = <&ethphy1>;
207	};
208};
209
210&pciec {
211        status = "okay";
212};
213
214&pcie0 {
215	status = "okay";
216};
217