1// SPDX-License-Identifier: GPL-2.0 OR X11 2/* 3 * Copyright 2015 Boundary Devices, Inc. 4 */ 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/input/input.h> 7 8/ { 9 chosen { 10 stdout-path = &uart2; 11 }; 12 13 memory@10000000 { 14 device_type = "memory"; 15 reg = <0x10000000 0x20000000>; 16 }; 17 18 regulators { 19 compatible = "simple-bus"; 20 #address-cells = <1>; 21 #size-cells = <0>; 22 23 reg_2p5v: regulator@0 { 24 compatible = "regulator-fixed"; 25 reg = <0>; 26 regulator-name = "2P5V"; 27 regulator-min-microvolt = <2500000>; 28 regulator-max-microvolt = <2500000>; 29 regulator-always-on; 30 }; 31 32 reg_3p3v: regulator@1 { 33 compatible = "regulator-fixed"; 34 reg = <1>; 35 regulator-name = "3P3V"; 36 regulator-min-microvolt = <3300000>; 37 regulator-max-microvolt = <3300000>; 38 regulator-always-on; 39 }; 40 41 reg_usb_otg_vbus: regulator@2 { 42 compatible = "regulator-fixed"; 43 reg = <2>; 44 regulator-name = "usb_otg_vbus"; 45 regulator-min-microvolt = <5000000>; 46 regulator-max-microvolt = <5000000>; 47 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 48 enable-active-high; 49 }; 50 51 reg_wlan_vmmc: regulator@3 { 52 compatible = "regulator-fixed"; 53 reg = <3>; 54 pinctrl-names = "default"; 55 pinctrl-0 = <&pinctrl_wlan_vmmc>; 56 regulator-name = "reg_wlan_vmmc"; 57 regulator-min-microvolt = <1800000>; 58 regulator-max-microvolt = <1800000>; 59 gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; 60 startup-delay-us = <70000>; 61 enable-active-high; 62 }; 63 }; 64 65 gpio-keys { 66 compatible = "gpio-keys"; 67 pinctrl-names = "default"; 68 pinctrl-0 = <&pinctrl_gpio_keys>; 69 70 home { 71 label = "Home"; 72 gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; 73 linux,code = <102>; 74 }; 75 76 back { 77 label = "Back"; 78 gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; 79 linux,code = <158>; 80 }; 81 }; 82 83 leds { 84 compatible = "gpio-leds"; 85 pinctrl-names = "default"; 86 pinctrl-0 = <&pinctrl_leds>; 87 88 j14-pin1 { 89 gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; 90 retain-state-suspended; 91 default-state = "off"; 92 }; 93 94 j14-pin3 { 95 gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; 96 retain-state-suspended; 97 default-state = "off"; 98 }; 99 100 j14-pins8-9 { 101 gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; 102 retain-state-suspended; 103 default-state = "off"; 104 }; 105 106 j46-pin2 { 107 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; 108 retain-state-suspended; 109 default-state = "off"; 110 }; 111 112 j46-pin3 { 113 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; 114 retain-state-suspended; 115 default-state = "off"; 116 }; 117 }; 118 119 backlight-lcd { 120 compatible = "pwm-backlight"; 121 pwms = <&pwm1 0 5000000>; 122 brightness-levels = <0 4 8 16 32 64 128 255>; 123 default-brightness-level = <7>; 124 power-supply = <®_3p3v>; 125 status = "okay"; 126 }; 127 128 backlight_lvds0: backlight-lvds0 { 129 compatible = "pwm-backlight"; 130 pwms = <&pwm4 0 5000000>; 131 brightness-levels = <0 4 8 16 32 64 128 255>; 132 default-brightness-level = <7>; 133 power-supply = <®_3p3v>; 134 status = "okay"; 135 }; 136 137 panel-lvds0 { 138 compatible = "hannstar,hsd100pxn1"; 139 backlight = <&backlight_lvds0>; 140 141 port { 142 panel_in_lvds0: endpoint { 143 remote-endpoint = <&lvds0_out>; 144 }; 145 }; 146 }; 147 148 sound { 149 compatible = "fsl,imx6dl-nit6xlite-sgtl5000", 150 "fsl,imx-audio-sgtl5000"; 151 model = "imx6dl-nit6xlite-sgtl5000"; 152 ssi-controller = <&ssi1>; 153 audio-codec = <&codec>; 154 audio-routing = 155 "MIC_IN", "Mic Jack", 156 "Mic Jack", "Mic Bias", 157 "Headphone Jack", "HP_OUT"; 158 mux-int-port = <1>; 159 mux-ext-port = <3>; 160 }; 161}; 162 163&audmux { 164 pinctrl-names = "default"; 165 pinctrl-0 = <&pinctrl_audmux>; 166 status = "okay"; 167}; 168 169&clks { 170 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, 171 <&clks IMX6QDL_CLK_LDB_DI1_SEL>; 172 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, 173 <&clks IMX6QDL_CLK_PLL3_USB_OTG>; 174}; 175 176&ecspi1 { 177 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; 178 pinctrl-names = "default"; 179 pinctrl-0 = <&pinctrl_ecspi1>; 180 status = "okay"; 181 182 flash: flash@0 { 183 compatible = "microchip,sst25vf016b"; 184 spi-max-frequency = <20000000>; 185 reg = <0>; 186 }; 187}; 188 189&fec { 190 pinctrl-names = "default"; 191 pinctrl-0 = <&pinctrl_enet>; 192 phy-mode = "rgmii"; 193 phy-handle = <ðphy>; 194 phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; 195 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, 196 <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; 197 fsl,err006687-workaround-present; 198 status = "okay"; 199 200 mdio { 201 #address-cells = <1>; 202 #size-cells = <0>; 203 204 ethphy: ethernet-phy { 205 compatible = "ethernet-phy-ieee802.3-c22"; 206 txen-skew-ps = <0>; 207 txc-skew-ps = <3000>; 208 rxdv-skew-ps = <0>; 209 rxc-skew-ps = <3000>; 210 rxd0-skew-ps = <0>; 211 rxd1-skew-ps = <0>; 212 rxd2-skew-ps = <0>; 213 rxd3-skew-ps = <0>; 214 txd0-skew-ps = <0>; 215 txd1-skew-ps = <0>; 216 txd2-skew-ps = <0>; 217 txd3-skew-ps = <0>; 218 }; 219 }; 220}; 221 222&hdmi { 223 ddc-i2c-bus = <&i2c2>; 224 status = "okay"; 225}; 226 227&i2c1 { 228 clock-frequency = <100000>; 229 pinctrl-names = "default"; 230 pinctrl-0 = <&pinctrl_i2c1>; 231 status = "okay"; 232 233 codec: sgtl5000@a { 234 compatible = "fsl,sgtl5000"; 235 pinctrl-names = "default"; 236 pinctrl-0 = <&pinctrl_sgtl5000>; 237 reg = <0x0a>; 238 clocks = <&clks IMX6QDL_CLK_CKO>; 239 VDDA-supply = <®_2p5v>; 240 VDDIO-supply = <®_3p3v>; 241 }; 242}; 243 244&i2c2 { 245 clock-frequency = <100000>; 246 pinctrl-names = "default"; 247 pinctrl-0 = <&pinctrl_i2c2>; 248 status = "okay"; 249}; 250 251&i2c3 { 252 clock-frequency = <100000>; 253 pinctrl-names = "default"; 254 pinctrl-0 = <&pinctrl_i2c3>; 255 status = "okay"; 256 257 touchscreen@4 { 258 compatible = "eeti,egalax_ts"; 259 reg = <0x04>; 260 interrupt-parent = <&gpio1>; 261 interrupts = <9 IRQ_TYPE_EDGE_FALLING>; 262 wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; 263 }; 264 265 touchscreen@38 { 266 compatible = "edt,edt-ft5x06"; 267 reg = <0x38>; 268 interrupt-parent = <&gpio1>; 269 interrupts = <9 IRQ_TYPE_EDGE_FALLING>; 270 wakeup-source; 271 }; 272 273 rtc@6f { 274 compatible = "isil,isl1208"; 275 pinctrl-names = "default"; 276 pinctrl-0 = <&pinctrl_rtc>; 277 reg = <0x6f>; 278 interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; 279 }; 280}; 281 282&iomuxc { 283 pinctrl-names = "default"; 284 pinctrl-0 = <&pinctrl_j10>; 285 pinctrl-1 = <&pinctrl_j28>; 286 287 imx6dl-nit6xlite { 288 pinctrl_audmux: audmuxgrp { 289 fsl,pins = < 290 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 291 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 292 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 293 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 294 >; 295 }; 296 297 pinctrl_ecspi1: ecspi1grp { 298 fsl,pins = < 299 MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 300 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 301 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 302 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 303 >; 304 }; 305 306 pinctrl_enet: enetgrp { 307 fsl,pins = < 308 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 309 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 310 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 311 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 312 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 313 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 314 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 315 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 316 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 317 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 318 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 319 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 320 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 321 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 322 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 323 /* Phy reset */ 324 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 325 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 326 MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 327 >; 328 }; 329 330 pinctrl_gpio_keys: gpio-keysgrp { 331 fsl,pins = < 332 /* Home Button: J14 pin 5 */ 333 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 334 /* Back Button: J14 pin 7 */ 335 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 336 >; 337 }; 338 339 pinctrl_i2c1: i2c1grp { 340 fsl,pins = < 341 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 342 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 343 >; 344 }; 345 346 pinctrl_i2c2: i2c2grp { 347 fsl,pins = < 348 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 349 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 350 >; 351 }; 352 353 pinctrl_i2c3: i2c3grp { 354 fsl,pins = < 355 MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 356 MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 357 /* Touch IRQ: J7 pin 4 */ 358 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 359 /* tcs2004 IRQ */ 360 MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 361 /* tsc2004 reset */ 362 MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 363 >; 364 }; 365 366 pinctrl_j10: j10grp { 367 fsl,pins = < 368 /* Broadcom WiFi module pins */ 369 MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 370 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 371 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 372 MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 373 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 374 MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 375 MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 376 >; 377 }; 378 379 pinctrl_j28: j28grp { 380 fsl,pins = < 381 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 382 >; 383 }; 384 385 pinctrl_leds: ledsgrp { 386 fsl,pins = < 387 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 388 MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 389 MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 390 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 391 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 392 >; 393 }; 394 395 pinctrl_pwm1: pwm1grp { 396 fsl,pins = < 397 MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 398 >; 399 }; 400 401 pinctrl_pwm3: pwm3grp { 402 fsl,pins = < 403 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 404 >; 405 }; 406 407 pinctrl_pwm4: pwm4grp { 408 fsl,pins = < 409 MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 410 >; 411 }; 412 413 pinctrl_wlan_vmmc: wlan-vmmcgrp { 414 fsl,pins = < 415 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 416 >; 417 }; 418 419 pinctrl_rtc: rtcgrp { 420 fsl,pins = < 421 MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 422 >; 423 }; 424 425 pinctrl_sgtl5000: sgtl5000grp { 426 fsl,pins = < 427 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 428 MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 429 >; 430 }; 431 432 pinctrl_uart1: uart1grp { 433 fsl,pins = < 434 MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 435 MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 436 >; 437 }; 438 439 pinctrl_uart2: uart2grp { 440 fsl,pins = < 441 MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 442 MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 443 >; 444 }; 445 446 pinctrl_uart3: uart3grp { 447 fsl,pins = < 448 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 449 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 450 MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 451 MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 452 >; 453 }; 454 455 pinctrl_usbotg: usbotggrp { 456 fsl,pins = < 457 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 458 MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 459 /* power enable, high active */ 460 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 461 >; 462 }; 463 464 pinctrl_usdhc2: usdhc2grp { 465 fsl,pins = < 466 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 467 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 468 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 469 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 470 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 471 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 472 >; 473 }; 474 475 pinctrl_usdhc3: usdhc3grp { 476 fsl,pins = < 477 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 478 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 479 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 480 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 481 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 482 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 483 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 484 >; 485 }; 486 }; 487}; 488 489&ldb { 490 status = "okay"; 491 492 lvds-channel@0 { 493 status = "okay"; 494 495 port@4 { 496 reg = <4>; 497 498 lvds0_out: endpoint { 499 remote-endpoint = <&panel_in_lvds0>; 500 }; 501 }; 502 }; 503}; 504 505&pcie { 506 status = "okay"; 507}; 508 509&pwm1 { 510 #pwm-cells = <2>; 511 pinctrl-names = "default"; 512 pinctrl-0 = <&pinctrl_pwm1>; 513 status = "okay"; 514}; 515 516&pwm3 { 517 pinctrl-names = "default"; 518 pinctrl-0 = <&pinctrl_pwm3>; 519 status = "okay"; 520}; 521 522&pwm4 { 523 #pwm-cells = <2>; 524 pinctrl-names = "default"; 525 pinctrl-0 = <&pinctrl_pwm4>; 526 status = "okay"; 527}; 528 529&ssi1 { 530 status = "okay"; 531}; 532 533&uart1 { 534 pinctrl-names = "default"; 535 pinctrl-0 = <&pinctrl_uart1>; 536 status = "okay"; 537}; 538 539&uart2 { 540 pinctrl-names = "default"; 541 pinctrl-0 = <&pinctrl_uart2>; 542 status = "okay"; 543}; 544 545&uart3 { 546 pinctrl-names = "default"; 547 pinctrl-0 = <&pinctrl_uart3>; 548 uart-has-rtscts; 549 status = "okay"; 550}; 551 552&usbh1 { 553 status = "okay"; 554}; 555 556&usbotg { 557 vbus-supply = <®_usb_otg_vbus>; 558 pinctrl-names = "default"; 559 pinctrl-0 = <&pinctrl_usbotg>; 560 disable-over-current; 561 status = "okay"; 562}; 563 564&usdhc2 { 565 pinctrl-names = "default"; 566 pinctrl-0 = <&pinctrl_usdhc2>; 567 bus-width = <4>; 568 non-removable; 569 vmmc-supply = <®_3p3v>; 570 vqmmc-supply = <®_wlan_vmmc>; 571 cap-power-off-card; 572 keep-power-in-suspend; 573 status = "okay"; 574}; 575 576&usdhc3 { 577 pinctrl-names = "default"; 578 pinctrl-0 = <&pinctrl_usdhc3>; 579 cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 580 vmmc-supply = <®_3p3v>; 581 status = "okay"; 582}; 583