1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright 2018 Luxul Inc.
4 */
5
6/dts-v1/;
7
8#include "bcm47094.dtsi"
9#include "bcm5301x-nand-cs0-bch8.dtsi"
10
11/ {
12	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
13	model = "Luxul XWR-3150 V1";
14
15	chosen {
16		bootargs = "earlycon";
17	};
18
19	memory@0 {
20		device_type = "memory";
21		reg = <0x00000000 0x08000000>,
22		      <0x88000000 0x18000000>;
23	};
24
25	nvram@1eff0000 {
26		compatible = "brcm,nvram";
27		reg = <0x1eff0000 0x10000>;
28
29		et0macaddr: et0macaddr {
30		};
31	};
32
33	leds {
34		compatible = "gpio-leds";
35
36		power	{
37			label = "bcm53xx:green:power";
38			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
39			linux,default-trigger = "default-on";
40		};
41
42		usb3	{
43			label = "bcm53xx:green:usb3";
44			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
45			trigger-sources = <&ohci_port1>, <&ehci_port1>,
46					  <&xhci_port1>;
47			linux,default-trigger = "usbport";
48		};
49
50		status	{
51			label = "bcm53xx:green:status";
52			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
53			linux,default-trigger = "timer";
54		};
55
56		2ghz {
57			label = "bcm53xx:green:2ghz";
58			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
59		};
60
61		5ghz {
62			label = "bcm53xx:green:5ghz";
63			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
64		};
65	};
66
67	gpio-keys {
68		compatible = "gpio-keys";
69
70		restart {
71			label = "Reset";
72			linux,code = <KEY_RESTART>;
73			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
74		};
75	};
76};
77
78&gmac0 {
79	nvmem-cells = <&et0macaddr>;
80	nvmem-cell-names = "mac-address";
81};
82
83&usb3 {
84	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
85};
86
87&usb3_phy {
88	status = "okay";
89};
90
91&spi_nor {
92	status = "okay";
93};
94
95&srab {
96	status = "okay";
97
98	ports {
99		port@0 {
100			reg = <0>;
101			label = "lan4";
102		};
103
104		port@1 {
105			reg = <1>;
106			label = "lan3";
107		};
108
109		port@2 {
110			reg = <2>;
111			label = "lan2";
112		};
113
114		port@3 {
115			reg = <3>;
116			label = "lan1";
117		};
118
119		port@4 {
120			reg = <4>;
121			label = "wan";
122		};
123
124		port@5 {
125			reg = <5>;
126			label = "cpu";
127			ethernet = <&gmac0>;
128		};
129	};
130};
131