1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SC7280 TLMM block
8
9maintainers:
10  - Rajendra Nayak <rnayak@codeaurora.org>
11
12description: |
13  This binding describes the Top Level Mode Multiplexer block found in the
14  SC7280 platform.
15
16properties:
17  compatible:
18    const: qcom,sc7280-pinctrl
19
20  reg:
21    maxItems: 1
22
23  interrupts:
24    description: Specifies the TLMM summary IRQ
25    maxItems: 1
26
27  interrupt-controller: true
28
29  '#interrupt-cells':
30    description:
31      Specifies the PIN numbers and Flags, as defined in defined in
32      include/dt-bindings/interrupt-controller/irq.h
33    const: 2
34
35  gpio-controller: true
36
37  '#gpio-cells':
38    description: Specifying the pin number and flags, as defined in
39      include/dt-bindings/gpio/gpio.h
40    const: 2
41
42  gpio-ranges:
43    maxItems: 1
44
45  wakeup-parent: true
46
47#PIN CONFIGURATION NODES
48patternProperties:
49  '-pins$':
50    type: object
51    description:
52      Pinctrl node's client devices use subnodes for desired pin configuration.
53      Client device subnodes use below standard properties.
54    $ref: "/schemas/pinctrl/pincfg-node.yaml"
55
56    properties:
57      pins:
58        description:
59          List of gpio pins affected by the properties specified in this
60          subnode.
61        items:
62          oneOf:
63            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-4])$"
64            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
65                      sdc2_cmd, sdc2_data, ufs_reset ]
66        minItems: 1
67        maxItems: 16
68
69      function:
70        description:
71          Specify the alternative function to be configured for the specified
72          pins.
73
74        enum: [ atest_char, atest_char0, atest_char1, atest_char2,
75                atest_char3, atest_usb0, atest_usb00, atest_usb01,
76                atest_usb02, atest_usb03, atest_usb1, atest_usb10,
77                atest_usb11, atest_usb12, atest_usb13, audio_ref,
78                cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
79                cci_timer2, cci_timer3, cci_timer4, cmu_rng0, cmu_rng1,
80                cmu_rng2, cmu_rng3, coex_uart1, cri_trng, cri_trng0,
81                cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, dp_hot,
82                dp_lcd, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
83                gpio, host2wlan_sol, ibi_i3c, jitter_bist, lpass_slimbus,
84                mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
85                mdp_vsync4, mdp_vsync5, mi2s0_data0, mi2s0_data1, mi2s0_sck,
86                mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
87                mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mss_grfc0,
88                mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, mss_grfc2,
89                mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7,
90                mss_grfc8, mss_grfc9, nav_gpio0, nav_gpio1, nav_gpio2,
91                pa_indicator, pcie0_clkreqn, pcie1_clkreqn, phase_flag,
92                pll_bist, pll_bypassnl, pll_clk, pll_reset, pri_mi2s, prng_rosc,
93                qdss, qdss_cti, qlink0_enable, qlink0_request, qlink0_wmss,
94                qlink1_enable, qlink1_request, qlink1_wmss, qspi_clk, qspi_cs,
95                qspi_data, qup00, qup01, qup02, qup03, qup04, qup05, qup06, qup07,
96                qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
97                sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sd_write,
98                sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tsense_pwm1,
99                tsense_pwm2, uim0_clk, uim0_data, uim0_present, uim0_reset,
100                uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
101                usb_phy, vfr_0, vfr_1, vsense_trigger ]
102
103      drive-strength:
104        enum: [2, 4, 6, 8, 10, 12, 14, 16]
105        default: 2
106        description:
107          Selects the drive strength for the specified pins, in mA.
108
109      bias-pull-down: true
110
111      bias-pull-up: true
112
113      bias-disable: true
114
115      output-high: true
116
117      output-low: true
118
119    required:
120      - pins
121      - function
122
123    additionalProperties: false
124
125allOf:
126  - $ref: "pinctrl.yaml#"
127
128required:
129  - compatible
130  - reg
131  - interrupts
132  - interrupt-controller
133  - '#interrupt-cells'
134  - gpio-controller
135  - '#gpio-cells'
136  - gpio-ranges
137
138additionalProperties: false
139
140examples:
141  - |
142        #include <dt-bindings/interrupt-controller/arm-gic.h>
143        tlmm: pinctrl@f000000 {
144                compatible = "qcom,sc7280-pinctrl";
145                reg = <0xf000000 0x1000000>;
146                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
147                gpio-controller;
148                #gpio-cells = <2>;
149                interrupt-controller;
150                #interrupt-cells = <2>;
151                gpio-ranges = <&tlmm 0 0 175>;
152                wakeup-parent = <&pdc>;
153
154                qup_uart5_default: qup-uart5-pins {
155                        pins = "gpio46", "gpio47";
156                        function = "qup13";
157                        drive-strength = <2>;
158                        bias-disable;
159                };
160        };
161