1==============
2CerfBoard/Cube
3==============
4
5*** The StrongARM version of the CerfBoard/Cube has been discontinued ***
6
7The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board
8that measures approximately 2" square. It includes an Ethernet
9controller, an RS232-compatible serial port, a USB function port, and
10one CompactFlash+ slot on the back. Pictures can be found at the
11Intrinsyc website, http://www.intrinsyc.com.
12
13This document describes the support in the Linux kernel for the
14Intrinsyc CerfBoard.
15
16Supported in this version
17=========================
18
19   - CompactFlash+ slot (select PCMCIA in General Setup and any options
20     that may be required)
21   - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in
22     Network Devices)
23   - Serial ports with a serial console (hardcoded to 38400 8N1)
24
25In order to get this kernel onto your Cerf, you need a server that runs
26both BOOTP and TFTP. Detailed instructions should have come with your
27evaluation kit on how to use the bootloader. This series of commands
28will suffice::
29
30   make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig
31   make ARCH=arm CROSS_COMPILE=arm-linux- zImage
32   make ARCH=arm CROSS_COMPILE=arm-linux- modules
33   cp arch/arm/boot/zImage <TFTP directory>
34
35support@intrinsyc.com
36