1 /*
2  * SuperH FLCTL nand controller
3  *
4  * Copyright © 2008 Renesas Solutions Corp.
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License as published by
8  * the Free Software Foundation; version 2 of the License.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
18  */
19 
20 #ifndef __SH_FLCTL_H__
21 #define __SH_FLCTL_H__
22 
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/nand.h>
25 #include <linux/mtd/partitions.h>
26 #include <linux/pm_qos.h>
27 
28 /* FLCTL registers */
29 #define FLCMNCR(f)		(f->reg + 0x0)
30 #define FLCMDCR(f)		(f->reg + 0x4)
31 #define FLCMCDR(f)		(f->reg + 0x8)
32 #define FLADR(f)		(f->reg + 0xC)
33 #define FLADR2(f)		(f->reg + 0x3C)
34 #define FLDATAR(f)		(f->reg + 0x10)
35 #define FLDTCNTR(f)		(f->reg + 0x14)
36 #define FLINTDMACR(f)		(f->reg + 0x18)
37 #define FLBSYTMR(f)		(f->reg + 0x1C)
38 #define FLBSYCNT(f)		(f->reg + 0x20)
39 #define FLDTFIFO(f)		(f->reg + 0x24)
40 #define FLECFIFO(f)		(f->reg + 0x28)
41 #define FLTRCR(f)		(f->reg + 0x2C)
42 #define FLHOLDCR(f)		(f->reg + 0x38)
43 #define	FL4ECCRESULT0(f)	(f->reg + 0x80)
44 #define	FL4ECCRESULT1(f)	(f->reg + 0x84)
45 #define	FL4ECCRESULT2(f)	(f->reg + 0x88)
46 #define	FL4ECCRESULT3(f)	(f->reg + 0x8C)
47 #define	FL4ECCCR(f)		(f->reg + 0x90)
48 #define	FL4ECCCNT(f)		(f->reg + 0x94)
49 #define	FLERRADR(f)		(f->reg + 0x98)
50 
51 /* FLCMNCR control bits */
52 #define ECCPOS2		(0x1 << 25)
53 #define _4ECCCNTEN	(0x1 << 24)
54 #define _4ECCEN		(0x1 << 23)
55 #define _4ECCCORRECT	(0x1 << 22)
56 #define SHBUSSEL	(0x1 << 20)
57 #define SEL_16BIT	(0x1 << 19)
58 #define SNAND_E		(0x1 << 18)	/* SNAND (0=512 1=2048)*/
59 #define QTSEL_E		(0x1 << 17)
60 #define ENDIAN		(0x1 << 16)	/* 1 = little endian */
61 #define FCKSEL_E	(0x1 << 15)
62 #define ECCPOS_00	(0x00 << 12)
63 #define ECCPOS_01	(0x01 << 12)
64 #define ECCPOS_02	(0x02 << 12)
65 #define ACM_SACCES_MODE	(0x01 << 10)
66 #define NANWF_E		(0x1 << 9)
67 #define SE_D		(0x1 << 8)	/* Spare area disable */
68 #define	CE1_ENABLE	(0x1 << 4)	/* Chip Enable 1 */
69 #define	CE0_ENABLE	(0x1 << 3)	/* Chip Enable 0 */
70 #define	TYPESEL_SET	(0x1 << 0)
71 
72 /*
73  * Clock settings using the PULSEx registers from FLCMNCR
74  *
75  * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
76  * to control the clock divider used between the High-Speed Peripheral Clock
77  * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
78  * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
79  * bit version the divider is seperate for the pulse width of high and low
80  * signals.
81  */
82 #define PULSE3	(0x1 << 27)
83 #define PULSE2	(0x1 << 17)
84 #define PULSE1	(0x1 << 15)
85 #define PULSE0	(0x1 << 9)
86 #define CLK_8B_0_5			PULSE1
87 #define CLK_8B_1			0x0
88 #define CLK_8B_1_5			(PULSE1 | PULSE2)
89 #define CLK_8B_2			PULSE0
90 #define CLK_8B_3			(PULSE0 | PULSE1 | PULSE2)
91 #define CLK_8B_4			(PULSE0 | PULSE2)
92 #define CLK_16B_6L_2H			PULSE0
93 #define CLK_16B_9L_3H			(PULSE0 | PULSE1 | PULSE2)
94 #define CLK_16B_12L_4H			(PULSE0 | PULSE2)
95 
96 /* FLCMDCR control bits */
97 #define ADRCNT2_E	(0x1 << 31)	/* 5byte address enable */
98 #define ADRMD_E		(0x1 << 26)	/* Sector address access */
99 #define CDSRC_E		(0x1 << 25)	/* Data buffer selection */
100 #define DOSR_E		(0x1 << 24)	/* Status read check */
101 #define SELRW		(0x1 << 21)	/*  0:read 1:write */
102 #define DOADR_E		(0x1 << 20)	/* Address stage execute */
103 #define ADRCNT_1	(0x00 << 18)	/* Address data bytes: 1byte */
104 #define ADRCNT_2	(0x01 << 18)	/* Address data bytes: 2byte */
105 #define ADRCNT_3	(0x02 << 18)	/* Address data bytes: 3byte */
106 #define ADRCNT_4	(0x03 << 18)	/* Address data bytes: 4byte */
107 #define DOCMD2_E	(0x1 << 17)	/* 2nd cmd stage execute */
108 #define DOCMD1_E	(0x1 << 16)	/* 1st cmd stage execute */
109 
110 /* FLTRCR control bits */
111 #define TRSTRT		(0x1 << 0)	/* translation start */
112 #define TREND		(0x1 << 1)	/* translation end */
113 
114 /*
115  * FLHOLDCR control bits
116  *
117  * HOLDEN: Bus Occupancy Enable (inverted)
118  * Enable this bit when the external bus might be used in between transfers.
119  * If not set and the bus gets used by other modules, a deadlock occurs.
120  */
121 #define HOLDEN		(0x1 << 0)
122 
123 /* FL4ECCCR control bits */
124 #define	_4ECCFA		(0x1 << 2)	/* 4 symbols correct fault */
125 #define	_4ECCEND	(0x1 << 1)	/* 4 symbols end */
126 #define	_4ECCEXST	(0x1 << 0)	/* 4 symbols exist */
127 
128 #define INIT_FL4ECCRESULT_VAL	0x03FF03FF
129 #define LOOP_TIMEOUT_MAX	0x00010000
130 
131 struct sh_flctl {
132 	struct mtd_info		mtd;
133 	struct nand_chip	chip;
134 	struct platform_device	*pdev;
135 	struct dev_pm_qos_request pm_qos;
136 	void __iomem		*reg;
137 
138 	uint8_t	done_buff[2048 + 64];	/* max size 2048 + 64 */
139 	int	read_bytes;
140 	int	index;
141 	int	seqin_column;		/* column in SEQIN cmd */
142 	int	seqin_page_addr;	/* page_addr in SEQIN cmd */
143 	uint32_t seqin_read_cmd;		/* read cmd in SEQIN cmd */
144 	int	erase1_page_addr;	/* page_addr in ERASE1 cmd */
145 	uint32_t erase_ADRCNT;		/* bits of FLCMDCR in ERASE1 cmd */
146 	uint32_t rw_ADRCNT;	/* bits of FLCMDCR in READ WRITE cmd */
147 	uint32_t flcmncr_base;	/* base value of FLCMNCR */
148 
149 	int	hwecc_cant_correct[4];
150 
151 	unsigned page_size:1;	/* NAND page size (0 = 512, 1 = 2048) */
152 	unsigned hwecc:1;	/* Hardware ECC (0 = disabled, 1 = enabled) */
153 	unsigned holden:1;	/* Hardware has FLHOLDCR and HOLDEN is set */
154 	unsigned qos_request:1;	/* QoS request to prevent deep power shutdown */
155 };
156 
157 struct sh_flctl_platform_data {
158 	struct mtd_partition	*parts;
159 	int			nr_parts;
160 	unsigned long		flcmncr_val;
161 
162 	unsigned has_hwecc:1;
163 	unsigned use_holden:1;
164 };
165 
mtd_to_flctl(struct mtd_info * mtdinfo)166 static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
167 {
168 	return container_of(mtdinfo, struct sh_flctl, mtd);
169 }
170 
171 #endif	/* __SH_FLCTL_H__ */
172