1 /*****************************************************************************/
2 /*
3 * moxa.c -- MOXA Intellio family multiport serial driver.
4 *
5 * Copyright (C) 1999-2000 Moxa Technologies (support@moxa.com).
6 * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
7 *
8 * This code is loosely based on the Linux serial driver, written by
9 * Linus Torvalds, Theodore T'so and others.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 */
16
17 /*
18 * MOXA Intellio Series Driver
19 * for : LINUX
20 * date : 1999/1/7
21 * version : 5.1
22 */
23
24 #include <linux/module.h>
25 #include <linux/types.h>
26 #include <linux/mm.h>
27 #include <linux/ioport.h>
28 #include <linux/errno.h>
29 #include <linux/firmware.h>
30 #include <linux/signal.h>
31 #include <linux/sched.h>
32 #include <linux/timer.h>
33 #include <linux/interrupt.h>
34 #include <linux/tty.h>
35 #include <linux/tty_flip.h>
36 #include <linux/major.h>
37 #include <linux/string.h>
38 #include <linux/fcntl.h>
39 #include <linux/ptrace.h>
40 #include <linux/serial.h>
41 #include <linux/tty_driver.h>
42 #include <linux/delay.h>
43 #include <linux/pci.h>
44 #include <linux/init.h>
45 #include <linux/bitops.h>
46 #include <linux/slab.h>
47 #include <linux/ratelimit.h>
48
49 #include <asm/io.h>
50 #include <asm/uaccess.h>
51
52 #include "moxa.h"
53
54 #define MOXA_VERSION "6.0k"
55
56 #define MOXA_FW_HDRLEN 32
57
58 #define MOXAMAJOR 172
59
60 #define MAX_BOARDS 4 /* Don't change this value */
61 #define MAX_PORTS_PER_BOARD 32 /* Don't change this value */
62 #define MAX_PORTS (MAX_BOARDS * MAX_PORTS_PER_BOARD)
63
64 #define MOXA_IS_320(brd) ((brd)->boardType == MOXA_BOARD_C320_ISA || \
65 (brd)->boardType == MOXA_BOARD_C320_PCI)
66
67 /*
68 * Define the Moxa PCI vendor and device IDs.
69 */
70 #define MOXA_BUS_TYPE_ISA 0
71 #define MOXA_BUS_TYPE_PCI 1
72
73 enum {
74 MOXA_BOARD_C218_PCI = 1,
75 MOXA_BOARD_C218_ISA,
76 MOXA_BOARD_C320_PCI,
77 MOXA_BOARD_C320_ISA,
78 MOXA_BOARD_CP204J,
79 };
80
81 static char *moxa_brdname[] =
82 {
83 "C218 Turbo PCI series",
84 "C218 Turbo ISA series",
85 "C320 Turbo PCI series",
86 "C320 Turbo ISA series",
87 "CP-204J series",
88 };
89
90 #ifdef CONFIG_PCI
91 static struct pci_device_id moxa_pcibrds[] = {
92 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C218),
93 .driver_data = MOXA_BOARD_C218_PCI },
94 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_C320),
95 .driver_data = MOXA_BOARD_C320_PCI },
96 { PCI_DEVICE(PCI_VENDOR_ID_MOXA, PCI_DEVICE_ID_MOXA_CP204J),
97 .driver_data = MOXA_BOARD_CP204J },
98 { 0 }
99 };
100 MODULE_DEVICE_TABLE(pci, moxa_pcibrds);
101 #endif /* CONFIG_PCI */
102
103 struct moxa_port;
104
105 static struct moxa_board_conf {
106 int boardType;
107 int numPorts;
108 int busType;
109
110 unsigned int ready;
111
112 struct moxa_port *ports;
113
114 void __iomem *basemem;
115 void __iomem *intNdx;
116 void __iomem *intPend;
117 void __iomem *intTable;
118 } moxa_boards[MAX_BOARDS];
119
120 struct mxser_mstatus {
121 tcflag_t cflag;
122 int cts;
123 int dsr;
124 int ri;
125 int dcd;
126 };
127
128 struct moxaq_str {
129 int inq;
130 int outq;
131 };
132
133 struct moxa_port {
134 struct tty_port port;
135 struct moxa_board_conf *board;
136 void __iomem *tableAddr;
137
138 int type;
139 int cflag;
140 unsigned long statusflags;
141
142 u8 DCDState; /* Protected by the port lock */
143 u8 lineCtrl;
144 u8 lowChkFlag;
145 };
146
147 struct mon_str {
148 int tick;
149 int rxcnt[MAX_PORTS];
150 int txcnt[MAX_PORTS];
151 };
152
153 /* statusflags */
154 #define TXSTOPPED 1
155 #define LOWWAIT 2
156 #define EMPTYWAIT 3
157
158 #define SERIAL_DO_RESTART
159
160 #define WAKEUP_CHARS 256
161
162 static int ttymajor = MOXAMAJOR;
163 static struct mon_str moxaLog;
164 static unsigned int moxaFuncTout = HZ / 2;
165 static unsigned int moxaLowWaterChk;
166 static DEFINE_MUTEX(moxa_openlock);
167 static DEFINE_SPINLOCK(moxa_lock);
168
169 static unsigned long baseaddr[MAX_BOARDS];
170 static unsigned int type[MAX_BOARDS];
171 static unsigned int numports[MAX_BOARDS];
172
173 MODULE_AUTHOR("William Chen");
174 MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver");
175 MODULE_LICENSE("GPL");
176 MODULE_FIRMWARE("c218tunx.cod");
177 MODULE_FIRMWARE("cp204unx.cod");
178 MODULE_FIRMWARE("c320tunx.cod");
179
180 module_param_array(type, uint, NULL, 0);
181 MODULE_PARM_DESC(type, "card type: C218=2, C320=4");
182 module_param_array(baseaddr, ulong, NULL, 0);
183 MODULE_PARM_DESC(baseaddr, "base address");
184 module_param_array(numports, uint, NULL, 0);
185 MODULE_PARM_DESC(numports, "numports (ignored for C218)");
186
187 module_param(ttymajor, int, 0);
188
189 /*
190 * static functions:
191 */
192 static int moxa_open(struct tty_struct *, struct file *);
193 static void moxa_close(struct tty_struct *, struct file *);
194 static int moxa_write(struct tty_struct *, const unsigned char *, int);
195 static int moxa_write_room(struct tty_struct *);
196 static void moxa_flush_buffer(struct tty_struct *);
197 static int moxa_chars_in_buffer(struct tty_struct *);
198 static void moxa_set_termios(struct tty_struct *, struct ktermios *);
199 static void moxa_stop(struct tty_struct *);
200 static void moxa_start(struct tty_struct *);
201 static void moxa_hangup(struct tty_struct *);
202 static int moxa_tiocmget(struct tty_struct *tty);
203 static int moxa_tiocmset(struct tty_struct *tty,
204 unsigned int set, unsigned int clear);
205 static void moxa_poll(unsigned long);
206 static void moxa_set_tty_param(struct tty_struct *, struct ktermios *);
207 static void moxa_shutdown(struct tty_port *);
208 static int moxa_carrier_raised(struct tty_port *);
209 static void moxa_dtr_rts(struct tty_port *, int);
210 /*
211 * moxa board interface functions:
212 */
213 static void MoxaPortEnable(struct moxa_port *);
214 static void MoxaPortDisable(struct moxa_port *);
215 static int MoxaPortSetTermio(struct moxa_port *, struct ktermios *, speed_t);
216 static int MoxaPortGetLineOut(struct moxa_port *, int *, int *);
217 static void MoxaPortLineCtrl(struct moxa_port *, int, int);
218 static void MoxaPortFlowCtrl(struct moxa_port *, int, int, int, int, int);
219 static int MoxaPortLineStatus(struct moxa_port *);
220 static void MoxaPortFlushData(struct moxa_port *, int);
221 static int MoxaPortWriteData(struct tty_struct *, const unsigned char *, int);
222 static int MoxaPortReadData(struct moxa_port *);
223 static int MoxaPortTxQueue(struct moxa_port *);
224 static int MoxaPortRxQueue(struct moxa_port *);
225 static int MoxaPortTxFree(struct moxa_port *);
226 static void MoxaPortTxDisable(struct moxa_port *);
227 static void MoxaPortTxEnable(struct moxa_port *);
228 static int moxa_get_serial_info(struct moxa_port *, struct serial_struct __user *);
229 static int moxa_set_serial_info(struct moxa_port *, struct serial_struct __user *);
230 static void MoxaSetFifo(struct moxa_port *port, int enable);
231
232 /*
233 * I/O functions
234 */
235
236 static DEFINE_SPINLOCK(moxafunc_lock);
237
moxa_wait_finish(void __iomem * ofsAddr)238 static void moxa_wait_finish(void __iomem *ofsAddr)
239 {
240 unsigned long end = jiffies + moxaFuncTout;
241
242 while (readw(ofsAddr + FuncCode) != 0)
243 if (time_after(jiffies, end))
244 return;
245 if (readw(ofsAddr + FuncCode) != 0)
246 printk_ratelimited(KERN_WARNING "moxa function expired\n");
247 }
248
moxafunc(void __iomem * ofsAddr,u16 cmd,u16 arg)249 static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
250 {
251 unsigned long flags;
252 spin_lock_irqsave(&moxafunc_lock, flags);
253 writew(arg, ofsAddr + FuncArg);
254 writew(cmd, ofsAddr + FuncCode);
255 moxa_wait_finish(ofsAddr);
256 spin_unlock_irqrestore(&moxafunc_lock, flags);
257 }
258
moxafuncret(void __iomem * ofsAddr,u16 cmd,u16 arg)259 static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
260 {
261 unsigned long flags;
262 u16 ret;
263 spin_lock_irqsave(&moxafunc_lock, flags);
264 writew(arg, ofsAddr + FuncArg);
265 writew(cmd, ofsAddr + FuncCode);
266 moxa_wait_finish(ofsAddr);
267 ret = readw(ofsAddr + FuncArg);
268 spin_unlock_irqrestore(&moxafunc_lock, flags);
269 return ret;
270 }
271
moxa_low_water_check(void __iomem * ofsAddr)272 static void moxa_low_water_check(void __iomem *ofsAddr)
273 {
274 u16 rptr, wptr, mask, len;
275
276 if (readb(ofsAddr + FlagStat) & Xoff_state) {
277 rptr = readw(ofsAddr + RXrptr);
278 wptr = readw(ofsAddr + RXwptr);
279 mask = readw(ofsAddr + RX_mask);
280 len = (wptr - rptr) & mask;
281 if (len <= Low_water)
282 moxafunc(ofsAddr, FC_SendXon, 0);
283 }
284 }
285
286 /*
287 * TTY operations
288 */
289
moxa_ioctl(struct tty_struct * tty,unsigned int cmd,unsigned long arg)290 static int moxa_ioctl(struct tty_struct *tty,
291 unsigned int cmd, unsigned long arg)
292 {
293 struct moxa_port *ch = tty->driver_data;
294 void __user *argp = (void __user *)arg;
295 int status, ret = 0;
296
297 if (tty->index == MAX_PORTS) {
298 if (cmd != MOXA_GETDATACOUNT && cmd != MOXA_GET_IOQUEUE &&
299 cmd != MOXA_GETMSTATUS)
300 return -EINVAL;
301 } else if (!ch)
302 return -ENODEV;
303
304 switch (cmd) {
305 case MOXA_GETDATACOUNT:
306 moxaLog.tick = jiffies;
307 if (copy_to_user(argp, &moxaLog, sizeof(moxaLog)))
308 ret = -EFAULT;
309 break;
310 case MOXA_FLUSH_QUEUE:
311 MoxaPortFlushData(ch, arg);
312 break;
313 case MOXA_GET_IOQUEUE: {
314 struct moxaq_str __user *argm = argp;
315 struct moxaq_str tmp;
316 struct moxa_port *p;
317 unsigned int i, j;
318
319 for (i = 0; i < MAX_BOARDS; i++) {
320 p = moxa_boards[i].ports;
321 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
322 memset(&tmp, 0, sizeof(tmp));
323 spin_lock_bh(&moxa_lock);
324 if (moxa_boards[i].ready) {
325 tmp.inq = MoxaPortRxQueue(p);
326 tmp.outq = MoxaPortTxQueue(p);
327 }
328 spin_unlock_bh(&moxa_lock);
329 if (copy_to_user(argm, &tmp, sizeof(tmp)))
330 return -EFAULT;
331 }
332 }
333 break;
334 } case MOXA_GET_OQUEUE:
335 status = MoxaPortTxQueue(ch);
336 ret = put_user(status, (unsigned long __user *)argp);
337 break;
338 case MOXA_GET_IQUEUE:
339 status = MoxaPortRxQueue(ch);
340 ret = put_user(status, (unsigned long __user *)argp);
341 break;
342 case MOXA_GETMSTATUS: {
343 struct mxser_mstatus __user *argm = argp;
344 struct mxser_mstatus tmp;
345 struct moxa_port *p;
346 unsigned int i, j;
347
348 for (i = 0; i < MAX_BOARDS; i++) {
349 p = moxa_boards[i].ports;
350 for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) {
351 struct tty_struct *ttyp;
352 memset(&tmp, 0, sizeof(tmp));
353 spin_lock_bh(&moxa_lock);
354 if (!moxa_boards[i].ready) {
355 spin_unlock_bh(&moxa_lock);
356 goto copy;
357 }
358
359 status = MoxaPortLineStatus(p);
360 spin_unlock_bh(&moxa_lock);
361
362 if (status & 1)
363 tmp.cts = 1;
364 if (status & 2)
365 tmp.dsr = 1;
366 if (status & 4)
367 tmp.dcd = 1;
368
369 ttyp = tty_port_tty_get(&p->port);
370 if (!ttyp || !ttyp->termios)
371 tmp.cflag = p->cflag;
372 else
373 tmp.cflag = ttyp->termios->c_cflag;
374 tty_kref_put(ttyp);
375 copy:
376 if (copy_to_user(argm, &tmp, sizeof(tmp)))
377 return -EFAULT;
378 }
379 }
380 break;
381 }
382 case TIOCGSERIAL:
383 mutex_lock(&ch->port.mutex);
384 ret = moxa_get_serial_info(ch, argp);
385 mutex_unlock(&ch->port.mutex);
386 break;
387 case TIOCSSERIAL:
388 mutex_lock(&ch->port.mutex);
389 ret = moxa_set_serial_info(ch, argp);
390 mutex_unlock(&ch->port.mutex);
391 break;
392 default:
393 ret = -ENOIOCTLCMD;
394 }
395 return ret;
396 }
397
moxa_break_ctl(struct tty_struct * tty,int state)398 static int moxa_break_ctl(struct tty_struct *tty, int state)
399 {
400 struct moxa_port *port = tty->driver_data;
401
402 moxafunc(port->tableAddr, state ? FC_SendBreak : FC_StopBreak,
403 Magic_code);
404 return 0;
405 }
406
407 static const struct tty_operations moxa_ops = {
408 .open = moxa_open,
409 .close = moxa_close,
410 .write = moxa_write,
411 .write_room = moxa_write_room,
412 .flush_buffer = moxa_flush_buffer,
413 .chars_in_buffer = moxa_chars_in_buffer,
414 .ioctl = moxa_ioctl,
415 .set_termios = moxa_set_termios,
416 .stop = moxa_stop,
417 .start = moxa_start,
418 .hangup = moxa_hangup,
419 .break_ctl = moxa_break_ctl,
420 .tiocmget = moxa_tiocmget,
421 .tiocmset = moxa_tiocmset,
422 };
423
424 static const struct tty_port_operations moxa_port_ops = {
425 .carrier_raised = moxa_carrier_raised,
426 .dtr_rts = moxa_dtr_rts,
427 .shutdown = moxa_shutdown,
428 };
429
430 static struct tty_driver *moxaDriver;
431 static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
432
433 /*
434 * HW init
435 */
436
moxa_check_fw_model(struct moxa_board_conf * brd,u8 model)437 static int moxa_check_fw_model(struct moxa_board_conf *brd, u8 model)
438 {
439 switch (brd->boardType) {
440 case MOXA_BOARD_C218_ISA:
441 case MOXA_BOARD_C218_PCI:
442 if (model != 1)
443 goto err;
444 break;
445 case MOXA_BOARD_CP204J:
446 if (model != 3)
447 goto err;
448 break;
449 default:
450 if (model != 2)
451 goto err;
452 break;
453 }
454 return 0;
455 err:
456 return -EINVAL;
457 }
458
moxa_check_fw(const void * ptr)459 static int moxa_check_fw(const void *ptr)
460 {
461 const __le16 *lptr = ptr;
462
463 if (*lptr != cpu_to_le16(0x7980))
464 return -EINVAL;
465
466 return 0;
467 }
468
moxa_load_bios(struct moxa_board_conf * brd,const u8 * buf,size_t len)469 static int moxa_load_bios(struct moxa_board_conf *brd, const u8 *buf,
470 size_t len)
471 {
472 void __iomem *baseAddr = brd->basemem;
473 u16 tmp;
474
475 writeb(HW_reset, baseAddr + Control_reg); /* reset */
476 msleep(10);
477 memset_io(baseAddr, 0, 4096);
478 memcpy_toio(baseAddr, buf, len); /* download BIOS */
479 writeb(0, baseAddr + Control_reg); /* restart */
480
481 msleep(2000);
482
483 switch (brd->boardType) {
484 case MOXA_BOARD_C218_ISA:
485 case MOXA_BOARD_C218_PCI:
486 tmp = readw(baseAddr + C218_key);
487 if (tmp != C218_KeyCode)
488 goto err;
489 break;
490 case MOXA_BOARD_CP204J:
491 tmp = readw(baseAddr + C218_key);
492 if (tmp != CP204J_KeyCode)
493 goto err;
494 break;
495 default:
496 tmp = readw(baseAddr + C320_key);
497 if (tmp != C320_KeyCode)
498 goto err;
499 tmp = readw(baseAddr + C320_status);
500 if (tmp != STS_init) {
501 printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
502 "module not found\n");
503 return -EIO;
504 }
505 break;
506 }
507
508 return 0;
509 err:
510 printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
511 return -EIO;
512 }
513
moxa_load_320b(struct moxa_board_conf * brd,const u8 * ptr,size_t len)514 static int moxa_load_320b(struct moxa_board_conf *brd, const u8 *ptr,
515 size_t len)
516 {
517 void __iomem *baseAddr = brd->basemem;
518
519 if (len < 7168) {
520 printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
521 return -EINVAL;
522 }
523
524 writew(len - 7168 - 2, baseAddr + C320bapi_len);
525 writeb(1, baseAddr + Control_reg); /* Select Page 1 */
526 memcpy_toio(baseAddr + DynPage_addr, ptr, 7168);
527 writeb(2, baseAddr + Control_reg); /* Select Page 2 */
528 memcpy_toio(baseAddr + DynPage_addr, ptr + 7168, len - 7168);
529
530 return 0;
531 }
532
moxa_real_load_code(struct moxa_board_conf * brd,const void * ptr,size_t len)533 static int moxa_real_load_code(struct moxa_board_conf *brd, const void *ptr,
534 size_t len)
535 {
536 void __iomem *baseAddr = brd->basemem;
537 const __le16 *uptr = ptr;
538 size_t wlen, len2, j;
539 unsigned long key, loadbuf, loadlen, checksum, checksum_ok;
540 unsigned int i, retry;
541 u16 usum, keycode;
542
543 keycode = (brd->boardType == MOXA_BOARD_CP204J) ? CP204J_KeyCode :
544 C218_KeyCode;
545
546 switch (brd->boardType) {
547 case MOXA_BOARD_CP204J:
548 case MOXA_BOARD_C218_ISA:
549 case MOXA_BOARD_C218_PCI:
550 key = C218_key;
551 loadbuf = C218_LoadBuf;
552 loadlen = C218DLoad_len;
553 checksum = C218check_sum;
554 checksum_ok = C218chksum_ok;
555 break;
556 default:
557 key = C320_key;
558 keycode = C320_KeyCode;
559 loadbuf = C320_LoadBuf;
560 loadlen = C320DLoad_len;
561 checksum = C320check_sum;
562 checksum_ok = C320chksum_ok;
563 break;
564 }
565
566 usum = 0;
567 wlen = len >> 1;
568 for (i = 0; i < wlen; i++)
569 usum += le16_to_cpu(uptr[i]);
570 retry = 0;
571 do {
572 wlen = len >> 1;
573 j = 0;
574 while (wlen) {
575 len2 = (wlen > 2048) ? 2048 : wlen;
576 wlen -= len2;
577 memcpy_toio(baseAddr + loadbuf, ptr + j, len2 << 1);
578 j += len2 << 1;
579
580 writew(len2, baseAddr + loadlen);
581 writew(0, baseAddr + key);
582 for (i = 0; i < 100; i++) {
583 if (readw(baseAddr + key) == keycode)
584 break;
585 msleep(10);
586 }
587 if (readw(baseAddr + key) != keycode)
588 return -EIO;
589 }
590 writew(0, baseAddr + loadlen);
591 writew(usum, baseAddr + checksum);
592 writew(0, baseAddr + key);
593 for (i = 0; i < 100; i++) {
594 if (readw(baseAddr + key) == keycode)
595 break;
596 msleep(10);
597 }
598 retry++;
599 } while ((readb(baseAddr + checksum_ok) != 1) && (retry < 3));
600 if (readb(baseAddr + checksum_ok) != 1)
601 return -EIO;
602
603 writew(0, baseAddr + key);
604 for (i = 0; i < 600; i++) {
605 if (readw(baseAddr + Magic_no) == Magic_code)
606 break;
607 msleep(10);
608 }
609 if (readw(baseAddr + Magic_no) != Magic_code)
610 return -EIO;
611
612 if (MOXA_IS_320(brd)) {
613 if (brd->busType == MOXA_BUS_TYPE_PCI) { /* ASIC board */
614 writew(0x3800, baseAddr + TMS320_PORT1);
615 writew(0x3900, baseAddr + TMS320_PORT2);
616 writew(28499, baseAddr + TMS320_CLOCK);
617 } else {
618 writew(0x3200, baseAddr + TMS320_PORT1);
619 writew(0x3400, baseAddr + TMS320_PORT2);
620 writew(19999, baseAddr + TMS320_CLOCK);
621 }
622 }
623 writew(1, baseAddr + Disable_IRQ);
624 writew(0, baseAddr + Magic_no);
625 for (i = 0; i < 500; i++) {
626 if (readw(baseAddr + Magic_no) == Magic_code)
627 break;
628 msleep(10);
629 }
630 if (readw(baseAddr + Magic_no) != Magic_code)
631 return -EIO;
632
633 if (MOXA_IS_320(brd)) {
634 j = readw(baseAddr + Module_cnt);
635 if (j <= 0)
636 return -EIO;
637 brd->numPorts = j * 8;
638 writew(j, baseAddr + Module_no);
639 writew(0, baseAddr + Magic_no);
640 for (i = 0; i < 600; i++) {
641 if (readw(baseAddr + Magic_no) == Magic_code)
642 break;
643 msleep(10);
644 }
645 if (readw(baseAddr + Magic_no) != Magic_code)
646 return -EIO;
647 }
648 brd->intNdx = baseAddr + IRQindex;
649 brd->intPend = baseAddr + IRQpending;
650 brd->intTable = baseAddr + IRQtable;
651
652 return 0;
653 }
654
moxa_load_code(struct moxa_board_conf * brd,const void * ptr,size_t len)655 static int moxa_load_code(struct moxa_board_conf *brd, const void *ptr,
656 size_t len)
657 {
658 void __iomem *ofsAddr, *baseAddr = brd->basemem;
659 struct moxa_port *port;
660 int retval, i;
661
662 if (len % 2) {
663 printk(KERN_ERR "MOXA: bios length is not even\n");
664 return -EINVAL;
665 }
666
667 retval = moxa_real_load_code(brd, ptr, len); /* may change numPorts */
668 if (retval)
669 return retval;
670
671 switch (brd->boardType) {
672 case MOXA_BOARD_C218_ISA:
673 case MOXA_BOARD_C218_PCI:
674 case MOXA_BOARD_CP204J:
675 port = brd->ports;
676 for (i = 0; i < brd->numPorts; i++, port++) {
677 port->board = brd;
678 port->DCDState = 0;
679 port->tableAddr = baseAddr + Extern_table +
680 Extern_size * i;
681 ofsAddr = port->tableAddr;
682 writew(C218rx_mask, ofsAddr + RX_mask);
683 writew(C218tx_mask, ofsAddr + TX_mask);
684 writew(C218rx_spage + i * C218buf_pageno, ofsAddr + Page_rxb);
685 writew(readw(ofsAddr + Page_rxb) + C218rx_pageno, ofsAddr + EndPage_rxb);
686
687 writew(C218tx_spage + i * C218buf_pageno, ofsAddr + Page_txb);
688 writew(readw(ofsAddr + Page_txb) + C218tx_pageno, ofsAddr + EndPage_txb);
689
690 }
691 break;
692 default:
693 port = brd->ports;
694 for (i = 0; i < brd->numPorts; i++, port++) {
695 port->board = brd;
696 port->DCDState = 0;
697 port->tableAddr = baseAddr + Extern_table +
698 Extern_size * i;
699 ofsAddr = port->tableAddr;
700 switch (brd->numPorts) {
701 case 8:
702 writew(C320p8rx_mask, ofsAddr + RX_mask);
703 writew(C320p8tx_mask, ofsAddr + TX_mask);
704 writew(C320p8rx_spage + i * C320p8buf_pgno, ofsAddr + Page_rxb);
705 writew(readw(ofsAddr + Page_rxb) + C320p8rx_pgno, ofsAddr + EndPage_rxb);
706 writew(C320p8tx_spage + i * C320p8buf_pgno, ofsAddr + Page_txb);
707 writew(readw(ofsAddr + Page_txb) + C320p8tx_pgno, ofsAddr + EndPage_txb);
708
709 break;
710 case 16:
711 writew(C320p16rx_mask, ofsAddr + RX_mask);
712 writew(C320p16tx_mask, ofsAddr + TX_mask);
713 writew(C320p16rx_spage + i * C320p16buf_pgno, ofsAddr + Page_rxb);
714 writew(readw(ofsAddr + Page_rxb) + C320p16rx_pgno, ofsAddr + EndPage_rxb);
715 writew(C320p16tx_spage + i * C320p16buf_pgno, ofsAddr + Page_txb);
716 writew(readw(ofsAddr + Page_txb) + C320p16tx_pgno, ofsAddr + EndPage_txb);
717 break;
718
719 case 24:
720 writew(C320p24rx_mask, ofsAddr + RX_mask);
721 writew(C320p24tx_mask, ofsAddr + TX_mask);
722 writew(C320p24rx_spage + i * C320p24buf_pgno, ofsAddr + Page_rxb);
723 writew(readw(ofsAddr + Page_rxb) + C320p24rx_pgno, ofsAddr + EndPage_rxb);
724 writew(C320p24tx_spage + i * C320p24buf_pgno, ofsAddr + Page_txb);
725 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
726 break;
727 case 32:
728 writew(C320p32rx_mask, ofsAddr + RX_mask);
729 writew(C320p32tx_mask, ofsAddr + TX_mask);
730 writew(C320p32tx_ofs, ofsAddr + Ofs_txb);
731 writew(C320p32rx_spage + i * C320p32buf_pgno, ofsAddr + Page_rxb);
732 writew(readb(ofsAddr + Page_rxb), ofsAddr + EndPage_rxb);
733 writew(C320p32tx_spage + i * C320p32buf_pgno, ofsAddr + Page_txb);
734 writew(readw(ofsAddr + Page_txb), ofsAddr + EndPage_txb);
735 break;
736 }
737 }
738 break;
739 }
740 return 0;
741 }
742
moxa_load_fw(struct moxa_board_conf * brd,const struct firmware * fw)743 static int moxa_load_fw(struct moxa_board_conf *brd, const struct firmware *fw)
744 {
745 const void *ptr = fw->data;
746 char rsn[64];
747 u16 lens[5];
748 size_t len;
749 unsigned int a, lenp, lencnt;
750 int ret = -EINVAL;
751 struct {
752 __le32 magic; /* 0x34303430 */
753 u8 reserved1[2];
754 u8 type; /* UNIX = 3 */
755 u8 model; /* C218T=1, C320T=2, CP204=3 */
756 u8 reserved2[8];
757 __le16 len[5];
758 } const *hdr = ptr;
759
760 BUILD_BUG_ON(ARRAY_SIZE(hdr->len) != ARRAY_SIZE(lens));
761
762 if (fw->size < MOXA_FW_HDRLEN) {
763 strcpy(rsn, "too short (even header won't fit)");
764 goto err;
765 }
766 if (hdr->magic != cpu_to_le32(0x30343034)) {
767 sprintf(rsn, "bad magic: %.8x", le32_to_cpu(hdr->magic));
768 goto err;
769 }
770 if (hdr->type != 3) {
771 sprintf(rsn, "not for linux, type is %u", hdr->type);
772 goto err;
773 }
774 if (moxa_check_fw_model(brd, hdr->model)) {
775 sprintf(rsn, "not for this card, model is %u", hdr->model);
776 goto err;
777 }
778
779 len = MOXA_FW_HDRLEN;
780 lencnt = hdr->model == 2 ? 5 : 3;
781 for (a = 0; a < ARRAY_SIZE(lens); a++) {
782 lens[a] = le16_to_cpu(hdr->len[a]);
783 if (lens[a] && len + lens[a] <= fw->size &&
784 moxa_check_fw(&fw->data[len]))
785 printk(KERN_WARNING "MOXA firmware: unexpected input "
786 "at offset %u, but going on\n", (u32)len);
787 if (!lens[a] && a < lencnt) {
788 sprintf(rsn, "too few entries in fw file");
789 goto err;
790 }
791 len += lens[a];
792 }
793
794 if (len != fw->size) {
795 sprintf(rsn, "bad length: %u (should be %u)", (u32)fw->size,
796 (u32)len);
797 goto err;
798 }
799
800 ptr += MOXA_FW_HDRLEN;
801 lenp = 0; /* bios */
802
803 strcpy(rsn, "read above");
804
805 ret = moxa_load_bios(brd, ptr, lens[lenp]);
806 if (ret)
807 goto err;
808
809 /* we skip the tty section (lens[1]), since we don't need it */
810 ptr += lens[lenp] + lens[lenp + 1];
811 lenp += 2; /* comm */
812
813 if (hdr->model == 2) {
814 ret = moxa_load_320b(brd, ptr, lens[lenp]);
815 if (ret)
816 goto err;
817 /* skip another tty */
818 ptr += lens[lenp] + lens[lenp + 1];
819 lenp += 2;
820 }
821
822 ret = moxa_load_code(brd, ptr, lens[lenp]);
823 if (ret)
824 goto err;
825
826 return 0;
827 err:
828 printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
829 return ret;
830 }
831
moxa_init_board(struct moxa_board_conf * brd,struct device * dev)832 static int moxa_init_board(struct moxa_board_conf *brd, struct device *dev)
833 {
834 const struct firmware *fw;
835 const char *file;
836 struct moxa_port *p;
837 unsigned int i;
838 int ret;
839
840 brd->ports = kcalloc(MAX_PORTS_PER_BOARD, sizeof(*brd->ports),
841 GFP_KERNEL);
842 if (brd->ports == NULL) {
843 printk(KERN_ERR "cannot allocate memory for ports\n");
844 ret = -ENOMEM;
845 goto err;
846 }
847
848 for (i = 0, p = brd->ports; i < MAX_PORTS_PER_BOARD; i++, p++) {
849 tty_port_init(&p->port);
850 p->port.ops = &moxa_port_ops;
851 p->type = PORT_16550A;
852 p->cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
853 }
854
855 switch (brd->boardType) {
856 case MOXA_BOARD_C218_ISA:
857 case MOXA_BOARD_C218_PCI:
858 file = "c218tunx.cod";
859 break;
860 case MOXA_BOARD_CP204J:
861 file = "cp204unx.cod";
862 break;
863 default:
864 file = "c320tunx.cod";
865 break;
866 }
867
868 ret = request_firmware(&fw, file, dev);
869 if (ret) {
870 printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
871 "you've placed '%s' file into your firmware "
872 "loader directory (e.g. /lib/firmware)\n",
873 file);
874 goto err_free;
875 }
876
877 ret = moxa_load_fw(brd, fw);
878
879 release_firmware(fw);
880
881 if (ret)
882 goto err_free;
883
884 spin_lock_bh(&moxa_lock);
885 brd->ready = 1;
886 if (!timer_pending(&moxaTimer))
887 mod_timer(&moxaTimer, jiffies + HZ / 50);
888 spin_unlock_bh(&moxa_lock);
889
890 return 0;
891 err_free:
892 kfree(brd->ports);
893 err:
894 return ret;
895 }
896
moxa_board_deinit(struct moxa_board_conf * brd)897 static void moxa_board_deinit(struct moxa_board_conf *brd)
898 {
899 unsigned int a, opened;
900
901 mutex_lock(&moxa_openlock);
902 spin_lock_bh(&moxa_lock);
903 brd->ready = 0;
904 spin_unlock_bh(&moxa_lock);
905
906 /* pci hot-un-plug support */
907 for (a = 0; a < brd->numPorts; a++)
908 if (brd->ports[a].port.flags & ASYNC_INITIALIZED) {
909 struct tty_struct *tty = tty_port_tty_get(
910 &brd->ports[a].port);
911 if (tty) {
912 tty_hangup(tty);
913 tty_kref_put(tty);
914 }
915 }
916 while (1) {
917 opened = 0;
918 for (a = 0; a < brd->numPorts; a++)
919 if (brd->ports[a].port.flags & ASYNC_INITIALIZED)
920 opened++;
921 mutex_unlock(&moxa_openlock);
922 if (!opened)
923 break;
924 msleep(50);
925 mutex_lock(&moxa_openlock);
926 }
927
928 iounmap(brd->basemem);
929 brd->basemem = NULL;
930 kfree(brd->ports);
931 }
932
933 #ifdef CONFIG_PCI
moxa_pci_probe(struct pci_dev * pdev,const struct pci_device_id * ent)934 static int __devinit moxa_pci_probe(struct pci_dev *pdev,
935 const struct pci_device_id *ent)
936 {
937 struct moxa_board_conf *board;
938 unsigned int i;
939 int board_type = ent->driver_data;
940 int retval;
941
942 retval = pci_enable_device(pdev);
943 if (retval) {
944 dev_err(&pdev->dev, "can't enable pci device\n");
945 goto err;
946 }
947
948 for (i = 0; i < MAX_BOARDS; i++)
949 if (moxa_boards[i].basemem == NULL)
950 break;
951
952 retval = -ENODEV;
953 if (i >= MAX_BOARDS) {
954 dev_warn(&pdev->dev, "more than %u MOXA Intellio family boards "
955 "found. Board is ignored.\n", MAX_BOARDS);
956 goto err;
957 }
958
959 board = &moxa_boards[i];
960
961 retval = pci_request_region(pdev, 2, "moxa-base");
962 if (retval) {
963 dev_err(&pdev->dev, "can't request pci region 2\n");
964 goto err;
965 }
966
967 board->basemem = ioremap_nocache(pci_resource_start(pdev, 2), 0x4000);
968 if (board->basemem == NULL) {
969 dev_err(&pdev->dev, "can't remap io space 2\n");
970 goto err_reg;
971 }
972
973 board->boardType = board_type;
974 switch (board_type) {
975 case MOXA_BOARD_C218_ISA:
976 case MOXA_BOARD_C218_PCI:
977 board->numPorts = 8;
978 break;
979
980 case MOXA_BOARD_CP204J:
981 board->numPorts = 4;
982 break;
983 default:
984 board->numPorts = 0;
985 break;
986 }
987 board->busType = MOXA_BUS_TYPE_PCI;
988
989 retval = moxa_init_board(board, &pdev->dev);
990 if (retval)
991 goto err_base;
992
993 pci_set_drvdata(pdev, board);
994
995 dev_info(&pdev->dev, "board '%s' ready (%u ports, firmware loaded)\n",
996 moxa_brdname[board_type - 1], board->numPorts);
997
998 return 0;
999 err_base:
1000 iounmap(board->basemem);
1001 board->basemem = NULL;
1002 err_reg:
1003 pci_release_region(pdev, 2);
1004 err:
1005 return retval;
1006 }
1007
moxa_pci_remove(struct pci_dev * pdev)1008 static void __devexit moxa_pci_remove(struct pci_dev *pdev)
1009 {
1010 struct moxa_board_conf *brd = pci_get_drvdata(pdev);
1011
1012 moxa_board_deinit(brd);
1013
1014 pci_release_region(pdev, 2);
1015 }
1016
1017 static struct pci_driver moxa_pci_driver = {
1018 .name = "moxa",
1019 .id_table = moxa_pcibrds,
1020 .probe = moxa_pci_probe,
1021 .remove = __devexit_p(moxa_pci_remove)
1022 };
1023 #endif /* CONFIG_PCI */
1024
moxa_init(void)1025 static int __init moxa_init(void)
1026 {
1027 unsigned int isabrds = 0;
1028 int retval = 0;
1029 struct moxa_board_conf *brd = moxa_boards;
1030 unsigned int i;
1031
1032 printk(KERN_INFO "MOXA Intellio family driver version %s\n",
1033 MOXA_VERSION);
1034 moxaDriver = alloc_tty_driver(MAX_PORTS + 1);
1035 if (!moxaDriver)
1036 return -ENOMEM;
1037
1038 moxaDriver->name = "ttyMX";
1039 moxaDriver->major = ttymajor;
1040 moxaDriver->minor_start = 0;
1041 moxaDriver->type = TTY_DRIVER_TYPE_SERIAL;
1042 moxaDriver->subtype = SERIAL_TYPE_NORMAL;
1043 moxaDriver->init_termios = tty_std_termios;
1044 moxaDriver->init_termios.c_cflag = B9600 | CS8 | CREAD | CLOCAL | HUPCL;
1045 moxaDriver->init_termios.c_ispeed = 9600;
1046 moxaDriver->init_termios.c_ospeed = 9600;
1047 moxaDriver->flags = TTY_DRIVER_REAL_RAW;
1048 tty_set_operations(moxaDriver, &moxa_ops);
1049
1050 if (tty_register_driver(moxaDriver)) {
1051 printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
1052 put_tty_driver(moxaDriver);
1053 return -1;
1054 }
1055
1056 /* Find the boards defined from module args. */
1057
1058 for (i = 0; i < MAX_BOARDS; i++) {
1059 if (!baseaddr[i])
1060 break;
1061 if (type[i] == MOXA_BOARD_C218_ISA ||
1062 type[i] == MOXA_BOARD_C320_ISA) {
1063 pr_debug("Moxa board %2d: %s board(baseAddr=%lx)\n",
1064 isabrds + 1, moxa_brdname[type[i] - 1],
1065 baseaddr[i]);
1066 brd->boardType = type[i];
1067 brd->numPorts = type[i] == MOXA_BOARD_C218_ISA ? 8 :
1068 numports[i];
1069 brd->busType = MOXA_BUS_TYPE_ISA;
1070 brd->basemem = ioremap_nocache(baseaddr[i], 0x4000);
1071 if (!brd->basemem) {
1072 printk(KERN_ERR "MOXA: can't remap %lx\n",
1073 baseaddr[i]);
1074 continue;
1075 }
1076 if (moxa_init_board(brd, NULL)) {
1077 iounmap(brd->basemem);
1078 brd->basemem = NULL;
1079 continue;
1080 }
1081
1082 printk(KERN_INFO "MOXA isa board found at 0x%.8lu and "
1083 "ready (%u ports, firmware loaded)\n",
1084 baseaddr[i], brd->numPorts);
1085
1086 brd++;
1087 isabrds++;
1088 }
1089 }
1090
1091 #ifdef CONFIG_PCI
1092 retval = pci_register_driver(&moxa_pci_driver);
1093 if (retval) {
1094 printk(KERN_ERR "Can't register MOXA pci driver!\n");
1095 if (isabrds)
1096 retval = 0;
1097 }
1098 #endif
1099
1100 return retval;
1101 }
1102
moxa_exit(void)1103 static void __exit moxa_exit(void)
1104 {
1105 unsigned int i;
1106
1107 #ifdef CONFIG_PCI
1108 pci_unregister_driver(&moxa_pci_driver);
1109 #endif
1110
1111 for (i = 0; i < MAX_BOARDS; i++) /* ISA boards */
1112 if (moxa_boards[i].ready)
1113 moxa_board_deinit(&moxa_boards[i]);
1114
1115 del_timer_sync(&moxaTimer);
1116
1117 if (tty_unregister_driver(moxaDriver))
1118 printk(KERN_ERR "Couldn't unregister MOXA Intellio family "
1119 "serial driver\n");
1120 put_tty_driver(moxaDriver);
1121 }
1122
1123 module_init(moxa_init);
1124 module_exit(moxa_exit);
1125
moxa_shutdown(struct tty_port * port)1126 static void moxa_shutdown(struct tty_port *port)
1127 {
1128 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1129 MoxaPortDisable(ch);
1130 MoxaPortFlushData(ch, 2);
1131 }
1132
moxa_carrier_raised(struct tty_port * port)1133 static int moxa_carrier_raised(struct tty_port *port)
1134 {
1135 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1136 int dcd;
1137
1138 spin_lock_irq(&port->lock);
1139 dcd = ch->DCDState;
1140 spin_unlock_irq(&port->lock);
1141 return dcd;
1142 }
1143
moxa_dtr_rts(struct tty_port * port,int onoff)1144 static void moxa_dtr_rts(struct tty_port *port, int onoff)
1145 {
1146 struct moxa_port *ch = container_of(port, struct moxa_port, port);
1147 MoxaPortLineCtrl(ch, onoff, onoff);
1148 }
1149
1150
moxa_open(struct tty_struct * tty,struct file * filp)1151 static int moxa_open(struct tty_struct *tty, struct file *filp)
1152 {
1153 struct moxa_board_conf *brd;
1154 struct moxa_port *ch;
1155 int port;
1156
1157 port = tty->index;
1158 if (port == MAX_PORTS) {
1159 return capable(CAP_SYS_ADMIN) ? 0 : -EPERM;
1160 }
1161 if (mutex_lock_interruptible(&moxa_openlock))
1162 return -ERESTARTSYS;
1163 brd = &moxa_boards[port / MAX_PORTS_PER_BOARD];
1164 if (!brd->ready) {
1165 mutex_unlock(&moxa_openlock);
1166 return -ENODEV;
1167 }
1168
1169 if (port % MAX_PORTS_PER_BOARD >= brd->numPorts) {
1170 mutex_unlock(&moxa_openlock);
1171 return -ENODEV;
1172 }
1173
1174 ch = &brd->ports[port % MAX_PORTS_PER_BOARD];
1175 ch->port.count++;
1176 tty->driver_data = ch;
1177 tty_port_tty_set(&ch->port, tty);
1178 mutex_lock(&ch->port.mutex);
1179 if (!(ch->port.flags & ASYNC_INITIALIZED)) {
1180 ch->statusflags = 0;
1181 moxa_set_tty_param(tty, tty->termios);
1182 MoxaPortLineCtrl(ch, 1, 1);
1183 MoxaPortEnable(ch);
1184 MoxaSetFifo(ch, ch->type == PORT_16550A);
1185 ch->port.flags |= ASYNC_INITIALIZED;
1186 }
1187 mutex_unlock(&ch->port.mutex);
1188 mutex_unlock(&moxa_openlock);
1189
1190 return tty_port_block_til_ready(&ch->port, tty, filp);
1191 }
1192
moxa_close(struct tty_struct * tty,struct file * filp)1193 static void moxa_close(struct tty_struct *tty, struct file *filp)
1194 {
1195 struct moxa_port *ch = tty->driver_data;
1196 ch->cflag = tty->termios->c_cflag;
1197 tty_port_close(&ch->port, tty, filp);
1198 }
1199
moxa_write(struct tty_struct * tty,const unsigned char * buf,int count)1200 static int moxa_write(struct tty_struct *tty,
1201 const unsigned char *buf, int count)
1202 {
1203 struct moxa_port *ch = tty->driver_data;
1204 unsigned long flags;
1205 int len;
1206
1207 if (ch == NULL)
1208 return 0;
1209
1210 spin_lock_irqsave(&moxa_lock, flags);
1211 len = MoxaPortWriteData(tty, buf, count);
1212 spin_unlock_irqrestore(&moxa_lock, flags);
1213
1214 set_bit(LOWWAIT, &ch->statusflags);
1215 return len;
1216 }
1217
moxa_write_room(struct tty_struct * tty)1218 static int moxa_write_room(struct tty_struct *tty)
1219 {
1220 struct moxa_port *ch;
1221
1222 if (tty->stopped)
1223 return 0;
1224 ch = tty->driver_data;
1225 if (ch == NULL)
1226 return 0;
1227 return MoxaPortTxFree(ch);
1228 }
1229
moxa_flush_buffer(struct tty_struct * tty)1230 static void moxa_flush_buffer(struct tty_struct *tty)
1231 {
1232 struct moxa_port *ch = tty->driver_data;
1233
1234 if (ch == NULL)
1235 return;
1236 MoxaPortFlushData(ch, 1);
1237 tty_wakeup(tty);
1238 }
1239
moxa_chars_in_buffer(struct tty_struct * tty)1240 static int moxa_chars_in_buffer(struct tty_struct *tty)
1241 {
1242 struct moxa_port *ch = tty->driver_data;
1243 int chars;
1244
1245 chars = MoxaPortTxQueue(ch);
1246 if (chars)
1247 /*
1248 * Make it possible to wakeup anything waiting for output
1249 * in tty_ioctl.c, etc.
1250 */
1251 set_bit(EMPTYWAIT, &ch->statusflags);
1252 return chars;
1253 }
1254
moxa_tiocmget(struct tty_struct * tty)1255 static int moxa_tiocmget(struct tty_struct *tty)
1256 {
1257 struct moxa_port *ch = tty->driver_data;
1258 int flag = 0, dtr, rts;
1259
1260 MoxaPortGetLineOut(ch, &dtr, &rts);
1261 if (dtr)
1262 flag |= TIOCM_DTR;
1263 if (rts)
1264 flag |= TIOCM_RTS;
1265 dtr = MoxaPortLineStatus(ch);
1266 if (dtr & 1)
1267 flag |= TIOCM_CTS;
1268 if (dtr & 2)
1269 flag |= TIOCM_DSR;
1270 if (dtr & 4)
1271 flag |= TIOCM_CD;
1272 return flag;
1273 }
1274
moxa_tiocmset(struct tty_struct * tty,unsigned int set,unsigned int clear)1275 static int moxa_tiocmset(struct tty_struct *tty,
1276 unsigned int set, unsigned int clear)
1277 {
1278 struct moxa_port *ch;
1279 int dtr, rts;
1280
1281 mutex_lock(&moxa_openlock);
1282 ch = tty->driver_data;
1283 if (!ch) {
1284 mutex_unlock(&moxa_openlock);
1285 return -EINVAL;
1286 }
1287
1288 MoxaPortGetLineOut(ch, &dtr, &rts);
1289 if (set & TIOCM_RTS)
1290 rts = 1;
1291 if (set & TIOCM_DTR)
1292 dtr = 1;
1293 if (clear & TIOCM_RTS)
1294 rts = 0;
1295 if (clear & TIOCM_DTR)
1296 dtr = 0;
1297 MoxaPortLineCtrl(ch, dtr, rts);
1298 mutex_unlock(&moxa_openlock);
1299 return 0;
1300 }
1301
moxa_set_termios(struct tty_struct * tty,struct ktermios * old_termios)1302 static void moxa_set_termios(struct tty_struct *tty,
1303 struct ktermios *old_termios)
1304 {
1305 struct moxa_port *ch = tty->driver_data;
1306
1307 if (ch == NULL)
1308 return;
1309 moxa_set_tty_param(tty, old_termios);
1310 if (!(old_termios->c_cflag & CLOCAL) && C_CLOCAL(tty))
1311 wake_up_interruptible(&ch->port.open_wait);
1312 }
1313
moxa_stop(struct tty_struct * tty)1314 static void moxa_stop(struct tty_struct *tty)
1315 {
1316 struct moxa_port *ch = tty->driver_data;
1317
1318 if (ch == NULL)
1319 return;
1320 MoxaPortTxDisable(ch);
1321 set_bit(TXSTOPPED, &ch->statusflags);
1322 }
1323
1324
moxa_start(struct tty_struct * tty)1325 static void moxa_start(struct tty_struct *tty)
1326 {
1327 struct moxa_port *ch = tty->driver_data;
1328
1329 if (ch == NULL)
1330 return;
1331
1332 if (!test_bit(TXSTOPPED, &ch->statusflags))
1333 return;
1334
1335 MoxaPortTxEnable(ch);
1336 clear_bit(TXSTOPPED, &ch->statusflags);
1337 }
1338
moxa_hangup(struct tty_struct * tty)1339 static void moxa_hangup(struct tty_struct *tty)
1340 {
1341 struct moxa_port *ch = tty->driver_data;
1342 tty_port_hangup(&ch->port);
1343 }
1344
moxa_new_dcdstate(struct moxa_port * p,u8 dcd)1345 static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd)
1346 {
1347 struct tty_struct *tty;
1348 unsigned long flags;
1349 dcd = !!dcd;
1350
1351 spin_lock_irqsave(&p->port.lock, flags);
1352 if (dcd != p->DCDState) {
1353 p->DCDState = dcd;
1354 spin_unlock_irqrestore(&p->port.lock, flags);
1355 tty = tty_port_tty_get(&p->port);
1356 if (tty && C_CLOCAL(tty) && !dcd)
1357 tty_hangup(tty);
1358 tty_kref_put(tty);
1359 }
1360 else
1361 spin_unlock_irqrestore(&p->port.lock, flags);
1362 }
1363
moxa_poll_port(struct moxa_port * p,unsigned int handle,u16 __iomem * ip)1364 static int moxa_poll_port(struct moxa_port *p, unsigned int handle,
1365 u16 __iomem *ip)
1366 {
1367 struct tty_struct *tty = tty_port_tty_get(&p->port);
1368 void __iomem *ofsAddr;
1369 unsigned int inited = p->port.flags & ASYNC_INITIALIZED;
1370 u16 intr;
1371
1372 if (tty) {
1373 if (test_bit(EMPTYWAIT, &p->statusflags) &&
1374 MoxaPortTxQueue(p) == 0) {
1375 clear_bit(EMPTYWAIT, &p->statusflags);
1376 tty_wakeup(tty);
1377 }
1378 if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped &&
1379 MoxaPortTxQueue(p) <= WAKEUP_CHARS) {
1380 clear_bit(LOWWAIT, &p->statusflags);
1381 tty_wakeup(tty);
1382 }
1383
1384 if (inited && !test_bit(TTY_THROTTLED, &tty->flags) &&
1385 MoxaPortRxQueue(p) > 0) { /* RX */
1386 MoxaPortReadData(p);
1387 tty_schedule_flip(tty);
1388 }
1389 } else {
1390 clear_bit(EMPTYWAIT, &p->statusflags);
1391 MoxaPortFlushData(p, 0); /* flush RX */
1392 }
1393
1394 if (!handle) /* nothing else to do */
1395 goto put;
1396
1397 intr = readw(ip); /* port irq status */
1398 if (intr == 0)
1399 goto put;
1400
1401 writew(0, ip); /* ACK port */
1402 ofsAddr = p->tableAddr;
1403 if (intr & IntrTx) /* disable tx intr */
1404 writew(readw(ofsAddr + HostStat) & ~WakeupTx,
1405 ofsAddr + HostStat);
1406
1407 if (!inited)
1408 goto put;
1409
1410 if (tty && (intr & IntrBreak) && !I_IGNBRK(tty)) { /* BREAK */
1411 tty_insert_flip_char(tty, 0, TTY_BREAK);
1412 tty_schedule_flip(tty);
1413 }
1414
1415 if (intr & IntrLine)
1416 moxa_new_dcdstate(p, readb(ofsAddr + FlagStat) & DCD_state);
1417 put:
1418 tty_kref_put(tty);
1419
1420 return 0;
1421 }
1422
moxa_poll(unsigned long ignored)1423 static void moxa_poll(unsigned long ignored)
1424 {
1425 struct moxa_board_conf *brd;
1426 u16 __iomem *ip;
1427 unsigned int card, port, served = 0;
1428
1429 spin_lock(&moxa_lock);
1430 for (card = 0; card < MAX_BOARDS; card++) {
1431 brd = &moxa_boards[card];
1432 if (!brd->ready)
1433 continue;
1434
1435 served++;
1436
1437 ip = NULL;
1438 if (readb(brd->intPend) == 0xff)
1439 ip = brd->intTable + readb(brd->intNdx);
1440
1441 for (port = 0; port < brd->numPorts; port++)
1442 moxa_poll_port(&brd->ports[port], !!ip, ip + port);
1443
1444 if (ip)
1445 writeb(0, brd->intPend); /* ACK */
1446
1447 if (moxaLowWaterChk) {
1448 struct moxa_port *p = brd->ports;
1449 for (port = 0; port < brd->numPorts; port++, p++)
1450 if (p->lowChkFlag) {
1451 p->lowChkFlag = 0;
1452 moxa_low_water_check(p->tableAddr);
1453 }
1454 }
1455 }
1456 moxaLowWaterChk = 0;
1457
1458 if (served)
1459 mod_timer(&moxaTimer, jiffies + HZ / 50);
1460 spin_unlock(&moxa_lock);
1461 }
1462
1463 /******************************************************************************/
1464
moxa_set_tty_param(struct tty_struct * tty,struct ktermios * old_termios)1465 static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_termios)
1466 {
1467 register struct ktermios *ts = tty->termios;
1468 struct moxa_port *ch = tty->driver_data;
1469 int rts, cts, txflow, rxflow, xany, baud;
1470
1471 rts = cts = txflow = rxflow = xany = 0;
1472 if (ts->c_cflag & CRTSCTS)
1473 rts = cts = 1;
1474 if (ts->c_iflag & IXON)
1475 txflow = 1;
1476 if (ts->c_iflag & IXOFF)
1477 rxflow = 1;
1478 if (ts->c_iflag & IXANY)
1479 xany = 1;
1480
1481 /* Clear the features we don't support */
1482 ts->c_cflag &= ~CMSPAR;
1483 MoxaPortFlowCtrl(ch, rts, cts, txflow, rxflow, xany);
1484 baud = MoxaPortSetTermio(ch, ts, tty_get_baud_rate(tty));
1485 if (baud == -1)
1486 baud = tty_termios_baud_rate(old_termios);
1487 /* Not put the baud rate into the termios data */
1488 tty_encode_baud_rate(tty, baud, baud);
1489 }
1490
1491 /*****************************************************************************
1492 * Driver level functions: *
1493 *****************************************************************************/
1494
MoxaPortFlushData(struct moxa_port * port,int mode)1495 static void MoxaPortFlushData(struct moxa_port *port, int mode)
1496 {
1497 void __iomem *ofsAddr;
1498 if (mode < 0 || mode > 2)
1499 return;
1500 ofsAddr = port->tableAddr;
1501 moxafunc(ofsAddr, FC_FlushQueue, mode);
1502 if (mode != 1) {
1503 port->lowChkFlag = 0;
1504 moxa_low_water_check(ofsAddr);
1505 }
1506 }
1507
1508 /*
1509 * Moxa Port Number Description:
1510 *
1511 * MOXA serial driver supports up to 4 MOXA-C218/C320 boards. And,
1512 * the port number using in MOXA driver functions will be 0 to 31 for
1513 * first MOXA board, 32 to 63 for second, 64 to 95 for third and 96
1514 * to 127 for fourth. For example, if you setup three MOXA boards,
1515 * first board is C218, second board is C320-16 and third board is
1516 * C320-32. The port number of first board (C218 - 8 ports) is from
1517 * 0 to 7. The port number of second board (C320 - 16 ports) is form
1518 * 32 to 47. The port number of third board (C320 - 32 ports) is from
1519 * 64 to 95. And those port numbers form 8 to 31, 48 to 63 and 96 to
1520 * 127 will be invalid.
1521 *
1522 *
1523 * Moxa Functions Description:
1524 *
1525 * Function 1: Driver initialization routine, this routine must be
1526 * called when initialized driver.
1527 * Syntax:
1528 * void MoxaDriverInit();
1529 *
1530 *
1531 * Function 2: Moxa driver private IOCTL command processing.
1532 * Syntax:
1533 * int MoxaDriverIoctl(unsigned int cmd, unsigned long arg, int port);
1534 *
1535 * unsigned int cmd : IOCTL command
1536 * unsigned long arg : IOCTL argument
1537 * int port : port number (0 - 127)
1538 *
1539 * return: 0 (OK)
1540 * -EINVAL
1541 * -ENOIOCTLCMD
1542 *
1543 *
1544 * Function 6: Enable this port to start Tx/Rx data.
1545 * Syntax:
1546 * void MoxaPortEnable(int port);
1547 * int port : port number (0 - 127)
1548 *
1549 *
1550 * Function 7: Disable this port
1551 * Syntax:
1552 * void MoxaPortDisable(int port);
1553 * int port : port number (0 - 127)
1554 *
1555 *
1556 * Function 10: Setting baud rate of this port.
1557 * Syntax:
1558 * speed_t MoxaPortSetBaud(int port, speed_t baud);
1559 * int port : port number (0 - 127)
1560 * long baud : baud rate (50 - 115200)
1561 *
1562 * return: 0 : this port is invalid or baud < 50
1563 * 50 - 115200 : the real baud rate set to the port, if
1564 * the argument baud is large than maximun
1565 * available baud rate, the real setting
1566 * baud rate will be the maximun baud rate.
1567 *
1568 *
1569 * Function 12: Configure the port.
1570 * Syntax:
1571 * int MoxaPortSetTermio(int port, struct ktermios *termio, speed_t baud);
1572 * int port : port number (0 - 127)
1573 * struct ktermios * termio : termio structure pointer
1574 * speed_t baud : baud rate
1575 *
1576 * return: -1 : this port is invalid or termio == NULL
1577 * 0 : setting O.K.
1578 *
1579 *
1580 * Function 13: Get the DTR/RTS state of this port.
1581 * Syntax:
1582 * int MoxaPortGetLineOut(int port, int *dtrState, int *rtsState);
1583 * int port : port number (0 - 127)
1584 * int * dtrState : pointer to INT to receive the current DTR
1585 * state. (if NULL, this function will not
1586 * write to this address)
1587 * int * rtsState : pointer to INT to receive the current RTS
1588 * state. (if NULL, this function will not
1589 * write to this address)
1590 *
1591 * return: -1 : this port is invalid
1592 * 0 : O.K.
1593 *
1594 *
1595 * Function 14: Setting the DTR/RTS output state of this port.
1596 * Syntax:
1597 * void MoxaPortLineCtrl(int port, int dtrState, int rtsState);
1598 * int port : port number (0 - 127)
1599 * int dtrState : DTR output state (0: off, 1: on)
1600 * int rtsState : RTS output state (0: off, 1: on)
1601 *
1602 *
1603 * Function 15: Setting the flow control of this port.
1604 * Syntax:
1605 * void MoxaPortFlowCtrl(int port, int rtsFlow, int ctsFlow, int rxFlow,
1606 * int txFlow,int xany);
1607 * int port : port number (0 - 127)
1608 * int rtsFlow : H/W RTS flow control (0: no, 1: yes)
1609 * int ctsFlow : H/W CTS flow control (0: no, 1: yes)
1610 * int rxFlow : S/W Rx XON/XOFF flow control (0: no, 1: yes)
1611 * int txFlow : S/W Tx XON/XOFF flow control (0: no, 1: yes)
1612 * int xany : S/W XANY flow control (0: no, 1: yes)
1613 *
1614 *
1615 * Function 16: Get ths line status of this port
1616 * Syntax:
1617 * int MoxaPortLineStatus(int port);
1618 * int port : port number (0 - 127)
1619 *
1620 * return: Bit 0 - CTS state (0: off, 1: on)
1621 * Bit 1 - DSR state (0: off, 1: on)
1622 * Bit 2 - DCD state (0: off, 1: on)
1623 *
1624 *
1625 * Function 19: Flush the Rx/Tx buffer data of this port.
1626 * Syntax:
1627 * void MoxaPortFlushData(int port, int mode);
1628 * int port : port number (0 - 127)
1629 * int mode
1630 * 0 : flush the Rx buffer
1631 * 1 : flush the Tx buffer
1632 * 2 : flush the Rx and Tx buffer
1633 *
1634 *
1635 * Function 20: Write data.
1636 * Syntax:
1637 * int MoxaPortWriteData(int port, unsigned char * buffer, int length);
1638 * int port : port number (0 - 127)
1639 * unsigned char * buffer : pointer to write data buffer.
1640 * int length : write data length
1641 *
1642 * return: 0 - length : real write data length
1643 *
1644 *
1645 * Function 21: Read data.
1646 * Syntax:
1647 * int MoxaPortReadData(int port, struct tty_struct *tty);
1648 * int port : port number (0 - 127)
1649 * struct tty_struct *tty : tty for data
1650 *
1651 * return: 0 - length : real read data length
1652 *
1653 *
1654 * Function 24: Get the Tx buffer current queued data bytes
1655 * Syntax:
1656 * int MoxaPortTxQueue(int port);
1657 * int port : port number (0 - 127)
1658 *
1659 * return: .. : Tx buffer current queued data bytes
1660 *
1661 *
1662 * Function 25: Get the Tx buffer current free space
1663 * Syntax:
1664 * int MoxaPortTxFree(int port);
1665 * int port : port number (0 - 127)
1666 *
1667 * return: .. : Tx buffer current free space
1668 *
1669 *
1670 * Function 26: Get the Rx buffer current queued data bytes
1671 * Syntax:
1672 * int MoxaPortRxQueue(int port);
1673 * int port : port number (0 - 127)
1674 *
1675 * return: .. : Rx buffer current queued data bytes
1676 *
1677 *
1678 * Function 28: Disable port data transmission.
1679 * Syntax:
1680 * void MoxaPortTxDisable(int port);
1681 * int port : port number (0 - 127)
1682 *
1683 *
1684 * Function 29: Enable port data transmission.
1685 * Syntax:
1686 * void MoxaPortTxEnable(int port);
1687 * int port : port number (0 - 127)
1688 *
1689 *
1690 * Function 31: Get the received BREAK signal count and reset it.
1691 * Syntax:
1692 * int MoxaPortResetBrkCnt(int port);
1693 * int port : port number (0 - 127)
1694 *
1695 * return: 0 - .. : BREAK signal count
1696 *
1697 *
1698 */
1699
MoxaPortEnable(struct moxa_port * port)1700 static void MoxaPortEnable(struct moxa_port *port)
1701 {
1702 void __iomem *ofsAddr;
1703 u16 lowwater = 512;
1704
1705 ofsAddr = port->tableAddr;
1706 writew(lowwater, ofsAddr + Low_water);
1707 if (MOXA_IS_320(port->board))
1708 moxafunc(ofsAddr, FC_SetBreakIrq, 0);
1709 else
1710 writew(readw(ofsAddr + HostStat) | WakeupBreak,
1711 ofsAddr + HostStat);
1712
1713 moxafunc(ofsAddr, FC_SetLineIrq, Magic_code);
1714 moxafunc(ofsAddr, FC_FlushQueue, 2);
1715
1716 moxafunc(ofsAddr, FC_EnableCH, Magic_code);
1717 MoxaPortLineStatus(port);
1718 }
1719
MoxaPortDisable(struct moxa_port * port)1720 static void MoxaPortDisable(struct moxa_port *port)
1721 {
1722 void __iomem *ofsAddr = port->tableAddr;
1723
1724 moxafunc(ofsAddr, FC_SetFlowCtl, 0); /* disable flow control */
1725 moxafunc(ofsAddr, FC_ClrLineIrq, Magic_code);
1726 writew(0, ofsAddr + HostStat);
1727 moxafunc(ofsAddr, FC_DisableCH, Magic_code);
1728 }
1729
MoxaPortSetBaud(struct moxa_port * port,speed_t baud)1730 static speed_t MoxaPortSetBaud(struct moxa_port *port, speed_t baud)
1731 {
1732 void __iomem *ofsAddr = port->tableAddr;
1733 unsigned int clock, val;
1734 speed_t max;
1735
1736 max = MOXA_IS_320(port->board) ? 460800 : 921600;
1737 if (baud < 50)
1738 return 0;
1739 if (baud > max)
1740 baud = max;
1741 clock = 921600;
1742 val = clock / baud;
1743 moxafunc(ofsAddr, FC_SetBaud, val);
1744 baud = clock / val;
1745 return baud;
1746 }
1747
MoxaPortSetTermio(struct moxa_port * port,struct ktermios * termio,speed_t baud)1748 static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
1749 speed_t baud)
1750 {
1751 void __iomem *ofsAddr;
1752 tcflag_t mode = 0;
1753
1754 ofsAddr = port->tableAddr;
1755
1756 mode = termio->c_cflag & CSIZE;
1757 if (mode == CS5)
1758 mode = MX_CS5;
1759 else if (mode == CS6)
1760 mode = MX_CS6;
1761 else if (mode == CS7)
1762 mode = MX_CS7;
1763 else if (mode == CS8)
1764 mode = MX_CS8;
1765
1766 if (termio->c_cflag & CSTOPB) {
1767 if (mode == MX_CS5)
1768 mode |= MX_STOP15;
1769 else
1770 mode |= MX_STOP2;
1771 } else
1772 mode |= MX_STOP1;
1773
1774 if (termio->c_cflag & PARENB) {
1775 if (termio->c_cflag & PARODD)
1776 mode |= MX_PARODD;
1777 else
1778 mode |= MX_PAREVEN;
1779 } else
1780 mode |= MX_PARNONE;
1781
1782 moxafunc(ofsAddr, FC_SetDataMode, (u16)mode);
1783
1784 if (MOXA_IS_320(port->board) && baud >= 921600)
1785 return -1;
1786
1787 baud = MoxaPortSetBaud(port, baud);
1788
1789 if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
1790 spin_lock_irq(&moxafunc_lock);
1791 writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
1792 writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
1793 writeb(FC_SetXonXoff, ofsAddr + FuncCode);
1794 moxa_wait_finish(ofsAddr);
1795 spin_unlock_irq(&moxafunc_lock);
1796
1797 }
1798 return baud;
1799 }
1800
MoxaPortGetLineOut(struct moxa_port * port,int * dtrState,int * rtsState)1801 static int MoxaPortGetLineOut(struct moxa_port *port, int *dtrState,
1802 int *rtsState)
1803 {
1804 if (dtrState)
1805 *dtrState = !!(port->lineCtrl & DTR_ON);
1806 if (rtsState)
1807 *rtsState = !!(port->lineCtrl & RTS_ON);
1808
1809 return 0;
1810 }
1811
MoxaPortLineCtrl(struct moxa_port * port,int dtr,int rts)1812 static void MoxaPortLineCtrl(struct moxa_port *port, int dtr, int rts)
1813 {
1814 u8 mode = 0;
1815
1816 if (dtr)
1817 mode |= DTR_ON;
1818 if (rts)
1819 mode |= RTS_ON;
1820 port->lineCtrl = mode;
1821 moxafunc(port->tableAddr, FC_LineControl, mode);
1822 }
1823
MoxaPortFlowCtrl(struct moxa_port * port,int rts,int cts,int txflow,int rxflow,int txany)1824 static void MoxaPortFlowCtrl(struct moxa_port *port, int rts, int cts,
1825 int txflow, int rxflow, int txany)
1826 {
1827 int mode = 0;
1828
1829 if (rts)
1830 mode |= RTS_FlowCtl;
1831 if (cts)
1832 mode |= CTS_FlowCtl;
1833 if (txflow)
1834 mode |= Tx_FlowCtl;
1835 if (rxflow)
1836 mode |= Rx_FlowCtl;
1837 if (txany)
1838 mode |= IXM_IXANY;
1839 moxafunc(port->tableAddr, FC_SetFlowCtl, mode);
1840 }
1841
MoxaPortLineStatus(struct moxa_port * port)1842 static int MoxaPortLineStatus(struct moxa_port *port)
1843 {
1844 void __iomem *ofsAddr;
1845 int val;
1846
1847 ofsAddr = port->tableAddr;
1848 if (MOXA_IS_320(port->board))
1849 val = moxafuncret(ofsAddr, FC_LineStatus, 0);
1850 else
1851 val = readw(ofsAddr + FlagStat) >> 4;
1852 val &= 0x0B;
1853 if (val & 8)
1854 val |= 4;
1855 moxa_new_dcdstate(port, val & 8);
1856 val &= 7;
1857 return val;
1858 }
1859
MoxaPortWriteData(struct tty_struct * tty,const unsigned char * buffer,int len)1860 static int MoxaPortWriteData(struct tty_struct *tty,
1861 const unsigned char *buffer, int len)
1862 {
1863 struct moxa_port *port = tty->driver_data;
1864 void __iomem *baseAddr, *ofsAddr, *ofs;
1865 unsigned int c, total;
1866 u16 head, tail, tx_mask, spage, epage;
1867 u16 pageno, pageofs, bufhead;
1868
1869 ofsAddr = port->tableAddr;
1870 baseAddr = port->board->basemem;
1871 tx_mask = readw(ofsAddr + TX_mask);
1872 spage = readw(ofsAddr + Page_txb);
1873 epage = readw(ofsAddr + EndPage_txb);
1874 tail = readw(ofsAddr + TXwptr);
1875 head = readw(ofsAddr + TXrptr);
1876 c = (head > tail) ? (head - tail - 1) : (head - tail + tx_mask);
1877 if (c > len)
1878 c = len;
1879 moxaLog.txcnt[port->port.tty->index] += c;
1880 total = c;
1881 if (spage == epage) {
1882 bufhead = readw(ofsAddr + Ofs_txb);
1883 writew(spage, baseAddr + Control_reg);
1884 while (c > 0) {
1885 if (head > tail)
1886 len = head - tail - 1;
1887 else
1888 len = tx_mask + 1 - tail;
1889 len = (c > len) ? len : c;
1890 ofs = baseAddr + DynPage_addr + bufhead + tail;
1891 memcpy_toio(ofs, buffer, len);
1892 buffer += len;
1893 tail = (tail + len) & tx_mask;
1894 c -= len;
1895 }
1896 } else {
1897 pageno = spage + (tail >> 13);
1898 pageofs = tail & Page_mask;
1899 while (c > 0) {
1900 len = Page_size - pageofs;
1901 if (len > c)
1902 len = c;
1903 writeb(pageno, baseAddr + Control_reg);
1904 ofs = baseAddr + DynPage_addr + pageofs;
1905 memcpy_toio(ofs, buffer, len);
1906 buffer += len;
1907 if (++pageno == epage)
1908 pageno = spage;
1909 pageofs = 0;
1910 c -= len;
1911 }
1912 tail = (tail + total) & tx_mask;
1913 }
1914 writew(tail, ofsAddr + TXwptr);
1915 writeb(1, ofsAddr + CD180TXirq); /* start to send */
1916 return total;
1917 }
1918
MoxaPortReadData(struct moxa_port * port)1919 static int MoxaPortReadData(struct moxa_port *port)
1920 {
1921 struct tty_struct *tty = port->port.tty;
1922 unsigned char *dst;
1923 void __iomem *baseAddr, *ofsAddr, *ofs;
1924 unsigned int count, len, total;
1925 u16 tail, rx_mask, spage, epage;
1926 u16 pageno, pageofs, bufhead, head;
1927
1928 ofsAddr = port->tableAddr;
1929 baseAddr = port->board->basemem;
1930 head = readw(ofsAddr + RXrptr);
1931 tail = readw(ofsAddr + RXwptr);
1932 rx_mask = readw(ofsAddr + RX_mask);
1933 spage = readw(ofsAddr + Page_rxb);
1934 epage = readw(ofsAddr + EndPage_rxb);
1935 count = (tail >= head) ? (tail - head) : (tail - head + rx_mask + 1);
1936 if (count == 0)
1937 return 0;
1938
1939 total = count;
1940 moxaLog.rxcnt[tty->index] += total;
1941 if (spage == epage) {
1942 bufhead = readw(ofsAddr + Ofs_rxb);
1943 writew(spage, baseAddr + Control_reg);
1944 while (count > 0) {
1945 ofs = baseAddr + DynPage_addr + bufhead + head;
1946 len = (tail >= head) ? (tail - head) :
1947 (rx_mask + 1 - head);
1948 len = tty_prepare_flip_string(tty, &dst,
1949 min(len, count));
1950 memcpy_fromio(dst, ofs, len);
1951 head = (head + len) & rx_mask;
1952 count -= len;
1953 }
1954 } else {
1955 pageno = spage + (head >> 13);
1956 pageofs = head & Page_mask;
1957 while (count > 0) {
1958 writew(pageno, baseAddr + Control_reg);
1959 ofs = baseAddr + DynPage_addr + pageofs;
1960 len = tty_prepare_flip_string(tty, &dst,
1961 min(Page_size - pageofs, count));
1962 memcpy_fromio(dst, ofs, len);
1963
1964 count -= len;
1965 pageofs = (pageofs + len) & Page_mask;
1966 if (pageofs == 0 && ++pageno == epage)
1967 pageno = spage;
1968 }
1969 head = (head + total) & rx_mask;
1970 }
1971 writew(head, ofsAddr + RXrptr);
1972 if (readb(ofsAddr + FlagStat) & Xoff_state) {
1973 moxaLowWaterChk = 1;
1974 port->lowChkFlag = 1;
1975 }
1976 return total;
1977 }
1978
1979
MoxaPortTxQueue(struct moxa_port * port)1980 static int MoxaPortTxQueue(struct moxa_port *port)
1981 {
1982 void __iomem *ofsAddr = port->tableAddr;
1983 u16 rptr, wptr, mask;
1984
1985 rptr = readw(ofsAddr + TXrptr);
1986 wptr = readw(ofsAddr + TXwptr);
1987 mask = readw(ofsAddr + TX_mask);
1988 return (wptr - rptr) & mask;
1989 }
1990
MoxaPortTxFree(struct moxa_port * port)1991 static int MoxaPortTxFree(struct moxa_port *port)
1992 {
1993 void __iomem *ofsAddr = port->tableAddr;
1994 u16 rptr, wptr, mask;
1995
1996 rptr = readw(ofsAddr + TXrptr);
1997 wptr = readw(ofsAddr + TXwptr);
1998 mask = readw(ofsAddr + TX_mask);
1999 return mask - ((wptr - rptr) & mask);
2000 }
2001
MoxaPortRxQueue(struct moxa_port * port)2002 static int MoxaPortRxQueue(struct moxa_port *port)
2003 {
2004 void __iomem *ofsAddr = port->tableAddr;
2005 u16 rptr, wptr, mask;
2006
2007 rptr = readw(ofsAddr + RXrptr);
2008 wptr = readw(ofsAddr + RXwptr);
2009 mask = readw(ofsAddr + RX_mask);
2010 return (wptr - rptr) & mask;
2011 }
2012
MoxaPortTxDisable(struct moxa_port * port)2013 static void MoxaPortTxDisable(struct moxa_port *port)
2014 {
2015 moxafunc(port->tableAddr, FC_SetXoffState, Magic_code);
2016 }
2017
MoxaPortTxEnable(struct moxa_port * port)2018 static void MoxaPortTxEnable(struct moxa_port *port)
2019 {
2020 moxafunc(port->tableAddr, FC_SetXonState, Magic_code);
2021 }
2022
moxa_get_serial_info(struct moxa_port * info,struct serial_struct __user * retinfo)2023 static int moxa_get_serial_info(struct moxa_port *info,
2024 struct serial_struct __user *retinfo)
2025 {
2026 struct serial_struct tmp = {
2027 .type = info->type,
2028 .line = info->port.tty->index,
2029 .flags = info->port.flags,
2030 .baud_base = 921600,
2031 .close_delay = info->port.close_delay
2032 };
2033 return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
2034 }
2035
2036
moxa_set_serial_info(struct moxa_port * info,struct serial_struct __user * new_info)2037 static int moxa_set_serial_info(struct moxa_port *info,
2038 struct serial_struct __user *new_info)
2039 {
2040 struct serial_struct new_serial;
2041
2042 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
2043 return -EFAULT;
2044
2045 if (new_serial.irq != 0 || new_serial.port != 0 ||
2046 new_serial.custom_divisor != 0 ||
2047 new_serial.baud_base != 921600)
2048 return -EPERM;
2049
2050 if (!capable(CAP_SYS_ADMIN)) {
2051 if (((new_serial.flags & ~ASYNC_USR_MASK) !=
2052 (info->port.flags & ~ASYNC_USR_MASK)))
2053 return -EPERM;
2054 } else
2055 info->port.close_delay = new_serial.close_delay * HZ / 100;
2056
2057 new_serial.flags = (new_serial.flags & ~ASYNC_FLAGS);
2058 new_serial.flags |= (info->port.flags & ASYNC_FLAGS);
2059
2060 MoxaSetFifo(info, new_serial.type == PORT_16550A);
2061
2062 info->type = new_serial.type;
2063 return 0;
2064 }
2065
2066
2067
2068 /*****************************************************************************
2069 * Static local functions: *
2070 *****************************************************************************/
2071
MoxaSetFifo(struct moxa_port * port,int enable)2072 static void MoxaSetFifo(struct moxa_port *port, int enable)
2073 {
2074 void __iomem *ofsAddr = port->tableAddr;
2075
2076 if (!enable) {
2077 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 0);
2078 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 1);
2079 } else {
2080 moxafunc(ofsAddr, FC_SetRxFIFOTrig, 3);
2081 moxafunc(ofsAddr, FC_SetTxFIFOCnt, 16);
2082 }
2083 }
2084