1 /*
2 * SDLA An implementation of a driver for the Sangoma S502/S508 series
3 * multi-protocol PC interface card. Initial offering is with
4 * the DLCI driver, providing Frame Relay support for linux.
5 *
6 * Global definitions for the Frame relay interface.
7 *
8 * Version: @(#)sdla.c 0.30 12 Sep 1996
9 *
10 * Credits: Sangoma Technologies, for the use of 2 cards for an extended
11 * period of time.
12 * David Mandelstam <dm@sangoma.com> for getting me started on
13 * this project, and incentive to complete it.
14 * Gene Kozen <74604.152@compuserve.com> for providing me with
15 * important information about the cards.
16 *
17 * Author: Mike McLagan <mike.mclagan@linux.org>
18 *
19 * Changes:
20 * 0.15 Mike McLagan Improved error handling, packet dropping
21 * 0.20 Mike McLagan New transmit/receive flags for config
22 * If in FR mode, don't accept packets from
23 * non DLCI devices.
24 * 0.25 Mike McLagan Fixed problem with rejecting packets
25 * from non DLCI devices.
26 * 0.30 Mike McLagan Fixed kernel panic when used with modified
27 * ifconfig
28 *
29 * This program is free software; you can redistribute it and/or
30 * modify it under the terms of the GNU General Public License
31 * as published by the Free Software Foundation; either version
32 * 2 of the License, or (at your option) any later version.
33 */
34
35 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
36
37 #include <linux/module.h>
38 #include <linux/kernel.h>
39 #include <linux/types.h>
40 #include <linux/fcntl.h>
41 #include <linux/interrupt.h>
42 #include <linux/ptrace.h>
43 #include <linux/ioport.h>
44 #include <linux/in.h>
45 #include <linux/slab.h>
46 #include <linux/string.h>
47 #include <linux/timer.h>
48 #include <linux/errno.h>
49 #include <linux/init.h>
50 #include <linux/netdevice.h>
51 #include <linux/skbuff.h>
52 #include <linux/if_arp.h>
53 #include <linux/if_frad.h>
54 #include <linux/sdla.h>
55 #include <linux/bitops.h>
56
57 #include <asm/io.h>
58 #include <asm/dma.h>
59 #include <asm/uaccess.h>
60
61 static const char* version = "SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org";
62
63 static unsigned int valid_port[] = { 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390};
64
65 static unsigned int valid_mem[] = {
66 0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000,
67 0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000,
68 0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000,
69 0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000,
70 0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000};
71
72 static DEFINE_SPINLOCK(sdla_lock);
73
74 /*********************************************************
75 *
76 * these are the core routines that access the card itself
77 *
78 *********************************************************/
79
80 #define SDLA_WINDOW(dev,addr) outb((((addr) >> 13) & 0x1F), (dev)->base_addr + SDLA_REG_Z80_WINDOW)
81
__sdla_read(struct net_device * dev,int addr,void * buf,short len)82 static void __sdla_read(struct net_device *dev, int addr, void *buf, short len)
83 {
84 char *temp;
85 const void *base;
86 int offset, bytes;
87
88 temp = buf;
89 while(len)
90 {
91 offset = addr & SDLA_ADDR_MASK;
92 bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
93 base = (const void *) (dev->mem_start + offset);
94
95 SDLA_WINDOW(dev, addr);
96 memcpy(temp, base, bytes);
97
98 addr += bytes;
99 temp += bytes;
100 len -= bytes;
101 }
102 }
103
sdla_read(struct net_device * dev,int addr,void * buf,short len)104 static void sdla_read(struct net_device *dev, int addr, void *buf, short len)
105 {
106 unsigned long flags;
107 spin_lock_irqsave(&sdla_lock, flags);
108 __sdla_read(dev, addr, buf, len);
109 spin_unlock_irqrestore(&sdla_lock, flags);
110 }
111
__sdla_write(struct net_device * dev,int addr,const void * buf,short len)112 static void __sdla_write(struct net_device *dev, int addr,
113 const void *buf, short len)
114 {
115 const char *temp;
116 void *base;
117 int offset, bytes;
118
119 temp = buf;
120 while(len)
121 {
122 offset = addr & SDLA_ADDR_MASK;
123 bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
124 base = (void *) (dev->mem_start + offset);
125
126 SDLA_WINDOW(dev, addr);
127 memcpy(base, temp, bytes);
128
129 addr += bytes;
130 temp += bytes;
131 len -= bytes;
132 }
133 }
134
sdla_write(struct net_device * dev,int addr,const void * buf,short len)135 static void sdla_write(struct net_device *dev, int addr,
136 const void *buf, short len)
137 {
138 unsigned long flags;
139
140 spin_lock_irqsave(&sdla_lock, flags);
141 __sdla_write(dev, addr, buf, len);
142 spin_unlock_irqrestore(&sdla_lock, flags);
143 }
144
145
sdla_clear(struct net_device * dev)146 static void sdla_clear(struct net_device *dev)
147 {
148 unsigned long flags;
149 char *base;
150 int len, addr, bytes;
151
152 len = 65536;
153 addr = 0;
154 bytes = SDLA_WINDOW_SIZE;
155 base = (void *) dev->mem_start;
156
157 spin_lock_irqsave(&sdla_lock, flags);
158 while(len)
159 {
160 SDLA_WINDOW(dev, addr);
161 memset(base, 0, bytes);
162
163 addr += bytes;
164 len -= bytes;
165 }
166 spin_unlock_irqrestore(&sdla_lock, flags);
167
168 }
169
sdla_byte(struct net_device * dev,int addr)170 static char sdla_byte(struct net_device *dev, int addr)
171 {
172 unsigned long flags;
173 char byte, *temp;
174
175 temp = (void *) (dev->mem_start + (addr & SDLA_ADDR_MASK));
176
177 spin_lock_irqsave(&sdla_lock, flags);
178 SDLA_WINDOW(dev, addr);
179 byte = *temp;
180 spin_unlock_irqrestore(&sdla_lock, flags);
181
182 return byte;
183 }
184
sdla_stop(struct net_device * dev)185 static void sdla_stop(struct net_device *dev)
186 {
187 struct frad_local *flp;
188
189 flp = netdev_priv(dev);
190 switch(flp->type)
191 {
192 case SDLA_S502A:
193 outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL);
194 flp->state = SDLA_HALT;
195 break;
196 case SDLA_S502E:
197 outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL);
198 outb(SDLA_S502E_ENABLE, dev->base_addr + SDLA_REG_CONTROL);
199 flp->state = SDLA_S502E_ENABLE;
200 break;
201 case SDLA_S507:
202 flp->state &= ~SDLA_CPUEN;
203 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
204 break;
205 case SDLA_S508:
206 flp->state &= ~SDLA_CPUEN;
207 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
208 break;
209 }
210 }
211
sdla_start(struct net_device * dev)212 static void sdla_start(struct net_device *dev)
213 {
214 struct frad_local *flp;
215
216 flp = netdev_priv(dev);
217 switch(flp->type)
218 {
219 case SDLA_S502A:
220 outb(SDLA_S502A_NMI, dev->base_addr + SDLA_REG_CONTROL);
221 outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL);
222 flp->state = SDLA_S502A_START;
223 break;
224 case SDLA_S502E:
225 outb(SDLA_S502E_CPUEN, dev->base_addr + SDLA_REG_Z80_CONTROL);
226 outb(0x00, dev->base_addr + SDLA_REG_CONTROL);
227 flp->state = 0;
228 break;
229 case SDLA_S507:
230 flp->state |= SDLA_CPUEN;
231 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
232 break;
233 case SDLA_S508:
234 flp->state |= SDLA_CPUEN;
235 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
236 break;
237 }
238 }
239
240 /****************************************************
241 *
242 * this is used for the S502A/E cards to determine
243 * the speed of the onboard CPU. Calibration is
244 * necessary for the Frame Relay code uploaded
245 * later. Incorrect results cause timing problems
246 * with link checks & status messages
247 *
248 ***************************************************/
249
sdla_z80_poll(struct net_device * dev,int z80_addr,int jiffs,char resp1,char resp2)250 static int sdla_z80_poll(struct net_device *dev, int z80_addr, int jiffs, char resp1, char resp2)
251 {
252 unsigned long start, done, now;
253 char resp, *temp;
254
255 start = now = jiffies;
256 done = jiffies + jiffs;
257
258 temp = (void *)dev->mem_start;
259 temp += z80_addr & SDLA_ADDR_MASK;
260
261 resp = ~resp1;
262 while (time_before(jiffies, done) && (resp != resp1) && (!resp2 || (resp != resp2)))
263 {
264 if (jiffies != now)
265 {
266 SDLA_WINDOW(dev, z80_addr);
267 now = jiffies;
268 resp = *temp;
269 }
270 }
271 return time_before(jiffies, done) ? jiffies - start : -1;
272 }
273
274 /* constants for Z80 CPU speed */
275 #define Z80_READY '1' /* Z80 is ready to begin */
276 #define LOADER_READY '2' /* driver is ready to begin */
277 #define Z80_SCC_OK '3' /* SCC is on board */
278 #define Z80_SCC_BAD '4' /* SCC was not found */
279
sdla_cpuspeed(struct net_device * dev,struct ifreq * ifr)280 static int sdla_cpuspeed(struct net_device *dev, struct ifreq *ifr)
281 {
282 int jiffs;
283 char data;
284
285 sdla_start(dev);
286 if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0)
287 return -EIO;
288
289 data = LOADER_READY;
290 sdla_write(dev, 0, &data, 1);
291
292 if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0)
293 return -EIO;
294
295 sdla_stop(dev);
296 sdla_read(dev, 0, &data, 1);
297
298 if (data == Z80_SCC_BAD)
299 {
300 printk("%s: SCC bad\n", dev->name);
301 return -EIO;
302 }
303
304 if (data != Z80_SCC_OK)
305 return -EINVAL;
306
307 if (jiffs < 165)
308 ifr->ifr_mtu = SDLA_CPU_16M;
309 else if (jiffs < 220)
310 ifr->ifr_mtu = SDLA_CPU_10M;
311 else if (jiffs < 258)
312 ifr->ifr_mtu = SDLA_CPU_8M;
313 else if (jiffs < 357)
314 ifr->ifr_mtu = SDLA_CPU_7M;
315 else if (jiffs < 467)
316 ifr->ifr_mtu = SDLA_CPU_5M;
317 else
318 ifr->ifr_mtu = SDLA_CPU_3M;
319
320 return 0;
321 }
322
323 /************************************************
324 *
325 * Direct interaction with the Frame Relay code
326 * starts here.
327 *
328 ************************************************/
329
330 struct _dlci_stat
331 {
332 short dlci;
333 char flags;
334 } __packed;
335
336 struct _frad_stat
337 {
338 char flags;
339 struct _dlci_stat dlcis[SDLA_MAX_DLCI];
340 };
341
sdla_errors(struct net_device * dev,int cmd,int dlci,int ret,int len,void * data)342 static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int len, void *data)
343 {
344 struct _dlci_stat *pstatus;
345 short *pdlci;
346 int i;
347 char *state, line[30];
348
349 switch (ret)
350 {
351 case SDLA_RET_MODEM:
352 state = data;
353 if (*state & SDLA_MODEM_DCD_LOW)
354 netdev_info(dev, "Modem DCD unexpectedly low!\n");
355 if (*state & SDLA_MODEM_CTS_LOW)
356 netdev_info(dev, "Modem CTS unexpectedly low!\n");
357 /* I should probably do something about this! */
358 break;
359
360 case SDLA_RET_CHANNEL_OFF:
361 netdev_info(dev, "Channel became inoperative!\n");
362 /* same here */
363 break;
364
365 case SDLA_RET_CHANNEL_ON:
366 netdev_info(dev, "Channel became operative!\n");
367 /* same here */
368 break;
369
370 case SDLA_RET_DLCI_STATUS:
371 netdev_info(dev, "Status change reported by Access Node\n");
372 len /= sizeof(struct _dlci_stat);
373 for(pstatus = data, i=0;i < len;i++,pstatus++)
374 {
375 if (pstatus->flags & SDLA_DLCI_NEW)
376 state = "new";
377 else if (pstatus->flags & SDLA_DLCI_DELETED)
378 state = "deleted";
379 else if (pstatus->flags & SDLA_DLCI_ACTIVE)
380 state = "active";
381 else
382 {
383 sprintf(line, "unknown status: %02X", pstatus->flags);
384 state = line;
385 }
386 netdev_info(dev, "DLCI %i: %s\n",
387 pstatus->dlci, state);
388 /* same here */
389 }
390 break;
391
392 case SDLA_RET_DLCI_UNKNOWN:
393 netdev_info(dev, "Received unknown DLCIs:");
394 len /= sizeof(short);
395 for(pdlci = data,i=0;i < len;i++,pdlci++)
396 pr_cont(" %i", *pdlci);
397 pr_cont("\n");
398 break;
399
400 case SDLA_RET_TIMEOUT:
401 netdev_err(dev, "Command timed out!\n");
402 break;
403
404 case SDLA_RET_BUF_OVERSIZE:
405 netdev_info(dev, "Bc/CIR overflow, acceptable size is %i\n",
406 len);
407 break;
408
409 case SDLA_RET_BUF_TOO_BIG:
410 netdev_info(dev, "Buffer size over specified max of %i\n",
411 len);
412 break;
413
414 case SDLA_RET_CHANNEL_INACTIVE:
415 case SDLA_RET_DLCI_INACTIVE:
416 case SDLA_RET_CIR_OVERFLOW:
417 case SDLA_RET_NO_BUFS:
418 if (cmd == SDLA_INFORMATION_WRITE)
419 break;
420
421 default:
422 netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n",
423 cmd, ret);
424 /* Further processing could be done here */
425 break;
426 }
427 }
428
sdla_cmd(struct net_device * dev,int cmd,short dlci,short flags,void * inbuf,short inlen,void * outbuf,short * outlen)429 static int sdla_cmd(struct net_device *dev, int cmd, short dlci, short flags,
430 void *inbuf, short inlen, void *outbuf, short *outlen)
431 {
432 static struct _frad_stat status;
433 struct frad_local *flp;
434 struct sdla_cmd *cmd_buf;
435 unsigned long pflags;
436 unsigned long jiffs;
437 int ret, waiting, len;
438 long window;
439
440 flp = netdev_priv(dev);
441 window = flp->type == SDLA_S508 ? SDLA_508_CMD_BUF : SDLA_502_CMD_BUF;
442 cmd_buf = (struct sdla_cmd *)(dev->mem_start + (window & SDLA_ADDR_MASK));
443 ret = 0;
444 len = 0;
445 jiffs = jiffies + HZ; /* 1 second is plenty */
446
447 spin_lock_irqsave(&sdla_lock, pflags);
448 SDLA_WINDOW(dev, window);
449 cmd_buf->cmd = cmd;
450 cmd_buf->dlci = dlci;
451 cmd_buf->flags = flags;
452
453 if (inbuf)
454 memcpy(cmd_buf->data, inbuf, inlen);
455
456 cmd_buf->length = inlen;
457
458 cmd_buf->opp_flag = 1;
459 spin_unlock_irqrestore(&sdla_lock, pflags);
460
461 waiting = 1;
462 len = 0;
463 while (waiting && time_before_eq(jiffies, jiffs))
464 {
465 if (waiting++ % 3)
466 {
467 spin_lock_irqsave(&sdla_lock, pflags);
468 SDLA_WINDOW(dev, window);
469 waiting = ((volatile int)(cmd_buf->opp_flag));
470 spin_unlock_irqrestore(&sdla_lock, pflags);
471 }
472 }
473
474 if (!waiting)
475 {
476
477 spin_lock_irqsave(&sdla_lock, pflags);
478 SDLA_WINDOW(dev, window);
479 ret = cmd_buf->retval;
480 len = cmd_buf->length;
481 if (outbuf && outlen)
482 {
483 *outlen = *outlen >= len ? len : *outlen;
484
485 if (*outlen)
486 memcpy(outbuf, cmd_buf->data, *outlen);
487 }
488
489 /* This is a local copy that's used for error handling */
490 if (ret)
491 memcpy(&status, cmd_buf->data, len > sizeof(status) ? sizeof(status) : len);
492
493 spin_unlock_irqrestore(&sdla_lock, pflags);
494 }
495 else
496 ret = SDLA_RET_TIMEOUT;
497
498 if (ret != SDLA_RET_OK)
499 sdla_errors(dev, cmd, dlci, ret, len, &status);
500
501 return ret;
502 }
503
504 /***********************************************
505 *
506 * these functions are called by the DLCI driver
507 *
508 ***********************************************/
509
510 static int sdla_reconfig(struct net_device *dev);
511
sdla_activate(struct net_device * slave,struct net_device * master)512 static int sdla_activate(struct net_device *slave, struct net_device *master)
513 {
514 struct frad_local *flp;
515 int i;
516
517 flp = netdev_priv(slave);
518
519 for(i=0;i<CONFIG_DLCI_MAX;i++)
520 if (flp->master[i] == master)
521 break;
522
523 if (i == CONFIG_DLCI_MAX)
524 return -ENODEV;
525
526 flp->dlci[i] = abs(flp->dlci[i]);
527
528 if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
529 sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
530
531 return 0;
532 }
533
sdla_deactivate(struct net_device * slave,struct net_device * master)534 static int sdla_deactivate(struct net_device *slave, struct net_device *master)
535 {
536 struct frad_local *flp;
537 int i;
538
539 flp = netdev_priv(slave);
540
541 for(i=0;i<CONFIG_DLCI_MAX;i++)
542 if (flp->master[i] == master)
543 break;
544
545 if (i == CONFIG_DLCI_MAX)
546 return -ENODEV;
547
548 flp->dlci[i] = -abs(flp->dlci[i]);
549
550 if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
551 sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
552
553 return 0;
554 }
555
sdla_assoc(struct net_device * slave,struct net_device * master)556 static int sdla_assoc(struct net_device *slave, struct net_device *master)
557 {
558 struct frad_local *flp;
559 int i;
560
561 if (master->type != ARPHRD_DLCI)
562 return -EINVAL;
563
564 flp = netdev_priv(slave);
565
566 for(i=0;i<CONFIG_DLCI_MAX;i++)
567 {
568 if (!flp->master[i])
569 break;
570 if (abs(flp->dlci[i]) == *(short *)(master->dev_addr))
571 return -EADDRINUSE;
572 }
573
574 if (i == CONFIG_DLCI_MAX)
575 return -EMLINK; /* #### Alan: Comments on this ?? */
576
577
578 flp->master[i] = master;
579 flp->dlci[i] = -*(short *)(master->dev_addr);
580 master->mtu = slave->mtu;
581
582 if (netif_running(slave)) {
583 if (flp->config.station == FRAD_STATION_CPE)
584 sdla_reconfig(slave);
585 else
586 sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
587 }
588
589 return 0;
590 }
591
sdla_deassoc(struct net_device * slave,struct net_device * master)592 static int sdla_deassoc(struct net_device *slave, struct net_device *master)
593 {
594 struct frad_local *flp;
595 int i;
596
597 flp = netdev_priv(slave);
598
599 for(i=0;i<CONFIG_DLCI_MAX;i++)
600 if (flp->master[i] == master)
601 break;
602
603 if (i == CONFIG_DLCI_MAX)
604 return -ENODEV;
605
606 flp->master[i] = NULL;
607 flp->dlci[i] = 0;
608
609
610 if (netif_running(slave)) {
611 if (flp->config.station == FRAD_STATION_CPE)
612 sdla_reconfig(slave);
613 else
614 sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
615 }
616
617 return 0;
618 }
619
sdla_dlci_conf(struct net_device * slave,struct net_device * master,int get)620 static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
621 {
622 struct frad_local *flp;
623 struct dlci_local *dlp;
624 int i;
625 short len, ret;
626
627 flp = netdev_priv(slave);
628
629 for(i=0;i<CONFIG_DLCI_MAX;i++)
630 if (flp->master[i] == master)
631 break;
632
633 if (i == CONFIG_DLCI_MAX)
634 return -ENODEV;
635
636 dlp = netdev_priv(master);
637
638 ret = SDLA_RET_OK;
639 len = sizeof(struct dlci_conf);
640 if (netif_running(slave)) {
641 if (get)
642 ret = sdla_cmd(slave, SDLA_READ_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,
643 NULL, 0, &dlp->config, &len);
644 else
645 ret = sdla_cmd(slave, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,
646 &dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL);
647 }
648
649 return ret == SDLA_RET_OK ? 0 : -EIO;
650 }
651
652 /**************************
653 *
654 * now for the Linux driver
655 *
656 **************************/
657
658 /* NOTE: the DLCI driver deals with freeing the SKB!! */
sdla_transmit(struct sk_buff * skb,struct net_device * dev)659 static netdev_tx_t sdla_transmit(struct sk_buff *skb,
660 struct net_device *dev)
661 {
662 struct frad_local *flp;
663 int ret, addr, accept, i;
664 short size;
665 unsigned long flags;
666 struct buf_entry *pbuf;
667
668 flp = netdev_priv(dev);
669 ret = 0;
670 accept = 1;
671
672 netif_stop_queue(dev);
673
674 /*
675 * stupid GateD insists on setting up the multicast router thru us
676 * and we're ill equipped to handle a non Frame Relay packet at this
677 * time!
678 */
679
680 accept = 1;
681 switch (dev->type)
682 {
683 case ARPHRD_FRAD:
684 if (skb->dev->type != ARPHRD_DLCI)
685 {
686 netdev_warn(dev, "Non DLCI device, type %i, tried to send on FRAD module\n",
687 skb->dev->type);
688 accept = 0;
689 }
690 break;
691 default:
692 netdev_warn(dev, "unknown firmware type 0x%04X\n",
693 dev->type);
694 accept = 0;
695 break;
696 }
697 if (accept)
698 {
699 /* this is frame specific, but till there's a PPP module, it's the default */
700 switch (flp->type)
701 {
702 case SDLA_S502A:
703 case SDLA_S502E:
704 ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, skb->data, skb->len, NULL, NULL);
705 break;
706 case SDLA_S508:
707 size = sizeof(addr);
708 ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, NULL, skb->len, &addr, &size);
709 if (ret == SDLA_RET_OK)
710 {
711
712 spin_lock_irqsave(&sdla_lock, flags);
713 SDLA_WINDOW(dev, addr);
714 pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK));
715 __sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
716 SDLA_WINDOW(dev, addr);
717 pbuf->opp_flag = 1;
718 spin_unlock_irqrestore(&sdla_lock, flags);
719 }
720 break;
721 }
722
723 switch (ret)
724 {
725 case SDLA_RET_OK:
726 dev->stats.tx_packets++;
727 break;
728
729 case SDLA_RET_CIR_OVERFLOW:
730 case SDLA_RET_BUF_OVERSIZE:
731 case SDLA_RET_NO_BUFS:
732 dev->stats.tx_dropped++;
733 break;
734
735 default:
736 dev->stats.tx_errors++;
737 break;
738 }
739 }
740 netif_wake_queue(dev);
741 for(i=0;i<CONFIG_DLCI_MAX;i++)
742 {
743 if(flp->master[i]!=NULL)
744 netif_wake_queue(flp->master[i]);
745 }
746
747 dev_kfree_skb(skb);
748 return NETDEV_TX_OK;
749 }
750
sdla_receive(struct net_device * dev)751 static void sdla_receive(struct net_device *dev)
752 {
753 struct net_device *master;
754 struct frad_local *flp;
755 struct dlci_local *dlp;
756 struct sk_buff *skb;
757
758 struct sdla_cmd *cmd;
759 struct buf_info *pbufi;
760 struct buf_entry *pbuf;
761
762 unsigned long flags;
763 int i=0, received, success, addr, buf_base, buf_top;
764 short dlci, len, len2, split;
765
766 flp = netdev_priv(dev);
767 success = 1;
768 received = addr = buf_top = buf_base = 0;
769 len = dlci = 0;
770 skb = NULL;
771 master = NULL;
772 cmd = NULL;
773 pbufi = NULL;
774 pbuf = NULL;
775
776 spin_lock_irqsave(&sdla_lock, flags);
777
778 switch (flp->type)
779 {
780 case SDLA_S502A:
781 case SDLA_S502E:
782 cmd = (void *) (dev->mem_start + (SDLA_502_RCV_BUF & SDLA_ADDR_MASK));
783 SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
784 success = cmd->opp_flag;
785 if (!success)
786 break;
787
788 dlci = cmd->dlci;
789 len = cmd->length;
790 break;
791
792 case SDLA_S508:
793 pbufi = (void *) (dev->mem_start + (SDLA_508_RXBUF_INFO & SDLA_ADDR_MASK));
794 SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
795 pbuf = (void *) (dev->mem_start + ((pbufi->rse_base + flp->buffer * sizeof(struct buf_entry)) & SDLA_ADDR_MASK));
796 success = pbuf->opp_flag;
797 if (!success)
798 break;
799
800 buf_top = pbufi->buf_top;
801 buf_base = pbufi->buf_base;
802 dlci = pbuf->dlci;
803 len = pbuf->length;
804 addr = pbuf->buf_addr;
805 break;
806 }
807
808 /* common code, find the DLCI and get the SKB */
809 if (success)
810 {
811 for (i=0;i<CONFIG_DLCI_MAX;i++)
812 if (flp->dlci[i] == dlci)
813 break;
814
815 if (i == CONFIG_DLCI_MAX)
816 {
817 netdev_notice(dev, "Received packet from invalid DLCI %i, ignoring\n",
818 dlci);
819 dev->stats.rx_errors++;
820 success = 0;
821 }
822 }
823
824 if (success)
825 {
826 master = flp->master[i];
827 skb = dev_alloc_skb(len + sizeof(struct frhdr));
828 if (skb == NULL)
829 {
830 netdev_notice(dev, "Memory squeeze, dropping packet\n");
831 dev->stats.rx_dropped++;
832 success = 0;
833 }
834 else
835 skb_reserve(skb, sizeof(struct frhdr));
836 }
837
838 /* pick up the data */
839 switch (flp->type)
840 {
841 case SDLA_S502A:
842 case SDLA_S502E:
843 if (success)
844 __sdla_read(dev, SDLA_502_RCV_BUF + SDLA_502_DATA_OFS, skb_put(skb,len), len);
845
846 SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
847 cmd->opp_flag = 0;
848 break;
849
850 case SDLA_S508:
851 if (success)
852 {
853 /* is this buffer split off the end of the internal ring buffer */
854 split = addr + len > buf_top + 1 ? len - (buf_top - addr + 1) : 0;
855 len2 = len - split;
856
857 __sdla_read(dev, addr, skb_put(skb, len2), len2);
858 if (split)
859 __sdla_read(dev, buf_base, skb_put(skb, split), split);
860 }
861
862 /* increment the buffer we're looking at */
863 SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
864 flp->buffer = (flp->buffer + 1) % pbufi->rse_num;
865 pbuf->opp_flag = 0;
866 break;
867 }
868
869 if (success)
870 {
871 dev->stats.rx_packets++;
872 dlp = netdev_priv(master);
873 (*dlp->receive)(skb, master);
874 }
875
876 spin_unlock_irqrestore(&sdla_lock, flags);
877 }
878
sdla_isr(int dummy,void * dev_id)879 static irqreturn_t sdla_isr(int dummy, void *dev_id)
880 {
881 struct net_device *dev;
882 struct frad_local *flp;
883 char byte;
884
885 dev = dev_id;
886
887 flp = netdev_priv(dev);
888
889 if (!flp->initialized)
890 {
891 netdev_warn(dev, "irq %d for uninitialized device\n", dev->irq);
892 return IRQ_NONE;
893 }
894
895 byte = sdla_byte(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE);
896 switch (byte)
897 {
898 case SDLA_INTR_RX:
899 sdla_receive(dev);
900 break;
901
902 /* the command will get an error return, which is processed above */
903 case SDLA_INTR_MODEM:
904 case SDLA_INTR_STATUS:
905 sdla_cmd(dev, SDLA_READ_DLC_STATUS, 0, 0, NULL, 0, NULL, NULL);
906 break;
907
908 case SDLA_INTR_TX:
909 case SDLA_INTR_COMPLETE:
910 case SDLA_INTR_TIMER:
911 netdev_warn(dev, "invalid irq flag 0x%02X\n", byte);
912 break;
913 }
914
915 /* the S502E requires a manual acknowledgement of the interrupt */
916 if (flp->type == SDLA_S502E)
917 {
918 flp->state &= ~SDLA_S502E_INTACK;
919 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
920 flp->state |= SDLA_S502E_INTACK;
921 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
922 }
923
924 /* this clears the byte, informing the Z80 we're done */
925 byte = 0;
926 sdla_write(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
927 return IRQ_HANDLED;
928 }
929
sdla_poll(unsigned long device)930 static void sdla_poll(unsigned long device)
931 {
932 struct net_device *dev;
933 struct frad_local *flp;
934
935 dev = (struct net_device *) device;
936 flp = netdev_priv(dev);
937
938 if (sdla_byte(dev, SDLA_502_RCV_BUF))
939 sdla_receive(dev);
940
941 flp->timer.expires = 1;
942 add_timer(&flp->timer);
943 }
944
sdla_close(struct net_device * dev)945 static int sdla_close(struct net_device *dev)
946 {
947 struct frad_local *flp;
948 struct intr_info intr;
949 int len, i;
950 short dlcis[CONFIG_DLCI_MAX];
951
952 flp = netdev_priv(dev);
953
954 len = 0;
955 for(i=0;i<CONFIG_DLCI_MAX;i++)
956 if (flp->dlci[i])
957 dlcis[len++] = abs(flp->dlci[i]);
958 len *= 2;
959
960 if (flp->config.station == FRAD_STATION_NODE)
961 {
962 for(i=0;i<CONFIG_DLCI_MAX;i++)
963 if (flp->dlci[i] > 0)
964 sdla_cmd(dev, SDLA_DEACTIVATE_DLCI, 0, 0, dlcis, len, NULL, NULL);
965 sdla_cmd(dev, SDLA_DELETE_DLCI, 0, 0, &flp->dlci[i], sizeof(flp->dlci[i]), NULL, NULL);
966 }
967
968 memset(&intr, 0, sizeof(intr));
969 /* let's start up the reception */
970 switch(flp->type)
971 {
972 case SDLA_S502A:
973 del_timer(&flp->timer);
974 break;
975
976 case SDLA_S502E:
977 sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
978 flp->state &= ~SDLA_S502E_INTACK;
979 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
980 break;
981
982 case SDLA_S507:
983 break;
984
985 case SDLA_S508:
986 sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
987 flp->state &= ~SDLA_S508_INTEN;
988 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
989 break;
990 }
991
992 sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
993
994 netif_stop_queue(dev);
995
996 return 0;
997 }
998
999 struct conf_data {
1000 struct frad_conf config;
1001 short dlci[CONFIG_DLCI_MAX];
1002 };
1003
sdla_open(struct net_device * dev)1004 static int sdla_open(struct net_device *dev)
1005 {
1006 struct frad_local *flp;
1007 struct dlci_local *dlp;
1008 struct conf_data data;
1009 struct intr_info intr;
1010 int len, i;
1011 char byte;
1012
1013 flp = netdev_priv(dev);
1014
1015 if (!flp->initialized)
1016 return -EPERM;
1017
1018 if (!flp->configured)
1019 return -EPERM;
1020
1021 /* time to send in the configuration */
1022 len = 0;
1023 for(i=0;i<CONFIG_DLCI_MAX;i++)
1024 if (flp->dlci[i])
1025 data.dlci[len++] = abs(flp->dlci[i]);
1026 len *= 2;
1027
1028 memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
1029 len += sizeof(struct frad_conf);
1030
1031 sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
1032 sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
1033
1034 if (flp->type == SDLA_S508)
1035 flp->buffer = 0;
1036
1037 sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
1038
1039 /* let's start up the reception */
1040 memset(&intr, 0, sizeof(intr));
1041 switch(flp->type)
1042 {
1043 case SDLA_S502A:
1044 flp->timer.expires = 1;
1045 add_timer(&flp->timer);
1046 break;
1047
1048 case SDLA_S502E:
1049 flp->state |= SDLA_S502E_ENABLE;
1050 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
1051 flp->state |= SDLA_S502E_INTACK;
1052 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
1053 byte = 0;
1054 sdla_write(dev, SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
1055 intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
1056 sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
1057 break;
1058
1059 case SDLA_S507:
1060 break;
1061
1062 case SDLA_S508:
1063 flp->state |= SDLA_S508_INTEN;
1064 outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
1065 byte = 0;
1066 sdla_write(dev, SDLA_508_IRQ_INTERFACE, &byte, sizeof(byte));
1067 intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
1068 intr.irq = dev->irq;
1069 sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
1070 break;
1071 }
1072
1073 if (flp->config.station == FRAD_STATION_CPE)
1074 {
1075 byte = SDLA_ICS_STATUS_ENQ;
1076 sdla_cmd(dev, SDLA_ISSUE_IN_CHANNEL_SIGNAL, 0, 0, &byte, sizeof(byte), NULL, NULL);
1077 }
1078 else
1079 {
1080 sdla_cmd(dev, SDLA_ADD_DLCI, 0, 0, data.dlci, len - sizeof(struct frad_conf), NULL, NULL);
1081 for(i=0;i<CONFIG_DLCI_MAX;i++)
1082 if (flp->dlci[i] > 0)
1083 sdla_cmd(dev, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], 2*sizeof(flp->dlci[i]), NULL, NULL);
1084 }
1085
1086 /* configure any specific DLCI settings */
1087 for(i=0;i<CONFIG_DLCI_MAX;i++)
1088 if (flp->dlci[i])
1089 {
1090 dlp = netdev_priv(flp->master[i]);
1091 if (dlp->configured)
1092 sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, &dlp->config, sizeof(struct dlci_conf), NULL, NULL);
1093 }
1094
1095 netif_start_queue(dev);
1096
1097 return 0;
1098 }
1099
sdla_config(struct net_device * dev,struct frad_conf __user * conf,int get)1100 static int sdla_config(struct net_device *dev, struct frad_conf __user *conf, int get)
1101 {
1102 struct frad_local *flp;
1103 struct conf_data data;
1104 int i;
1105 short size;
1106
1107 if (dev->type == 0xFFFF)
1108 return -EUNATCH;
1109
1110 flp = netdev_priv(dev);
1111
1112 if (!get)
1113 {
1114 if (netif_running(dev))
1115 return -EBUSY;
1116
1117 if(copy_from_user(&data.config, conf, sizeof(struct frad_conf)))
1118 return -EFAULT;
1119
1120 if (data.config.station & ~FRAD_STATION_NODE)
1121 return -EINVAL;
1122
1123 if (data.config.flags & ~FRAD_VALID_FLAGS)
1124 return -EINVAL;
1125
1126 if ((data.config.kbaud < 0) ||
1127 ((data.config.kbaud > 128) && (flp->type != SDLA_S508)))
1128 return -EINVAL;
1129
1130 if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232))
1131 return -EINVAL;
1132
1133 if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU))
1134 return -EINVAL;
1135
1136 if ((data.config.T391 < 5) || (data.config.T391 > 30))
1137 return -EINVAL;
1138
1139 if ((data.config.T392 < 5) || (data.config.T392 > 30))
1140 return -EINVAL;
1141
1142 if ((data.config.N391 < 1) || (data.config.N391 > 255))
1143 return -EINVAL;
1144
1145 if ((data.config.N392 < 1) || (data.config.N392 > 10))
1146 return -EINVAL;
1147
1148 if ((data.config.N393 < 1) || (data.config.N393 > 10))
1149 return -EINVAL;
1150
1151 memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
1152 flp->config.flags |= SDLA_DIRECT_RECV;
1153
1154 if (flp->type == SDLA_S508)
1155 flp->config.flags |= SDLA_TX70_RX30;
1156
1157 if (dev->mtu != flp->config.mtu)
1158 {
1159 /* this is required to change the MTU */
1160 dev->mtu = flp->config.mtu;
1161 for(i=0;i<CONFIG_DLCI_MAX;i++)
1162 if (flp->master[i])
1163 flp->master[i]->mtu = flp->config.mtu;
1164 }
1165
1166 flp->config.mtu += sizeof(struct frhdr);
1167
1168 /* off to the races! */
1169 if (!flp->configured)
1170 sdla_start(dev);
1171
1172 flp->configured = 1;
1173 }
1174 else
1175 {
1176 /* no sense reading if the CPU isn't started */
1177 if (netif_running(dev))
1178 {
1179 size = sizeof(data);
1180 if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK)
1181 return -EIO;
1182 }
1183 else
1184 if (flp->configured)
1185 memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
1186 else
1187 memset(&data.config, 0, sizeof(struct frad_conf));
1188
1189 memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
1190 data.config.flags &= FRAD_VALID_FLAGS;
1191 data.config.mtu -= data.config.mtu > sizeof(struct frhdr) ? sizeof(struct frhdr) : data.config.mtu;
1192 return copy_to_user(conf, &data.config, sizeof(struct frad_conf))?-EFAULT:0;
1193 }
1194
1195 return 0;
1196 }
1197
sdla_xfer(struct net_device * dev,struct sdla_mem __user * info,int read)1198 static int sdla_xfer(struct net_device *dev, struct sdla_mem __user *info, int read)
1199 {
1200 struct sdla_mem mem;
1201 char *temp;
1202
1203 if(copy_from_user(&mem, info, sizeof(mem)))
1204 return -EFAULT;
1205
1206 if (read)
1207 {
1208 temp = kzalloc(mem.len, GFP_KERNEL);
1209 if (!temp)
1210 return -ENOMEM;
1211 sdla_read(dev, mem.addr, temp, mem.len);
1212 if(copy_to_user(mem.data, temp, mem.len))
1213 {
1214 kfree(temp);
1215 return -EFAULT;
1216 }
1217 kfree(temp);
1218 }
1219 else
1220 {
1221 temp = memdup_user(mem.data, mem.len);
1222 if (IS_ERR(temp))
1223 return PTR_ERR(temp);
1224 sdla_write(dev, mem.addr, temp, mem.len);
1225 kfree(temp);
1226 }
1227 return 0;
1228 }
1229
sdla_reconfig(struct net_device * dev)1230 static int sdla_reconfig(struct net_device *dev)
1231 {
1232 struct frad_local *flp;
1233 struct conf_data data;
1234 int i, len;
1235
1236 flp = netdev_priv(dev);
1237
1238 len = 0;
1239 for(i=0;i<CONFIG_DLCI_MAX;i++)
1240 if (flp->dlci[i])
1241 data.dlci[len++] = flp->dlci[i];
1242 len *= 2;
1243
1244 memcpy(&data, &flp->config, sizeof(struct frad_conf));
1245 len += sizeof(struct frad_conf);
1246
1247 sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
1248 sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
1249 sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
1250
1251 return 0;
1252 }
1253
sdla_ioctl(struct net_device * dev,struct ifreq * ifr,int cmd)1254 static int sdla_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1255 {
1256 struct frad_local *flp;
1257
1258 if(!capable(CAP_NET_ADMIN))
1259 return -EPERM;
1260
1261 flp = netdev_priv(dev);
1262
1263 if (!flp->initialized)
1264 return -EINVAL;
1265
1266 switch (cmd)
1267 {
1268 case FRAD_GET_CONF:
1269 case FRAD_SET_CONF:
1270 return sdla_config(dev, ifr->ifr_data, cmd == FRAD_GET_CONF);
1271
1272 case SDLA_IDENTIFY:
1273 ifr->ifr_flags = flp->type;
1274 break;
1275
1276 case SDLA_CPUSPEED:
1277 return sdla_cpuspeed(dev, ifr);
1278
1279 /* ==========================================================
1280 NOTE: This is rather a useless action right now, as the
1281 current driver does not support protocols other than
1282 FR. However, Sangoma has modules for a number of
1283 other protocols in the works.
1284 ============================================================*/
1285 case SDLA_PROTOCOL:
1286 if (flp->configured)
1287 return -EALREADY;
1288
1289 switch (ifr->ifr_flags)
1290 {
1291 case ARPHRD_FRAD:
1292 dev->type = ifr->ifr_flags;
1293 break;
1294 default:
1295 return -ENOPROTOOPT;
1296 }
1297 break;
1298
1299 case SDLA_CLEARMEM:
1300 sdla_clear(dev);
1301 break;
1302
1303 case SDLA_WRITEMEM:
1304 case SDLA_READMEM:
1305 if(!capable(CAP_SYS_RAWIO))
1306 return -EPERM;
1307 return sdla_xfer(dev, ifr->ifr_data, cmd == SDLA_READMEM);
1308
1309 case SDLA_START:
1310 sdla_start(dev);
1311 break;
1312
1313 case SDLA_STOP:
1314 sdla_stop(dev);
1315 break;
1316
1317 default:
1318 return -EOPNOTSUPP;
1319 }
1320 return 0;
1321 }
1322
sdla_change_mtu(struct net_device * dev,int new_mtu)1323 static int sdla_change_mtu(struct net_device *dev, int new_mtu)
1324 {
1325 struct frad_local *flp;
1326
1327 flp = netdev_priv(dev);
1328
1329 if (netif_running(dev))
1330 return -EBUSY;
1331
1332 /* for now, you can't change the MTU! */
1333 return -EOPNOTSUPP;
1334 }
1335
sdla_set_config(struct net_device * dev,struct ifmap * map)1336 static int sdla_set_config(struct net_device *dev, struct ifmap *map)
1337 {
1338 struct frad_local *flp;
1339 int i;
1340 char byte;
1341 unsigned base;
1342 int err = -EINVAL;
1343
1344 flp = netdev_priv(dev);
1345
1346 if (flp->initialized)
1347 return -EINVAL;
1348
1349 for(i=0; i < ARRAY_SIZE(valid_port); i++)
1350 if (valid_port[i] == map->base_addr)
1351 break;
1352
1353 if (i == ARRAY_SIZE(valid_port))
1354 return -EINVAL;
1355
1356 if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
1357 pr_warn("io-port 0x%04lx in use\n", dev->base_addr);
1358 return -EINVAL;
1359 }
1360 base = map->base_addr;
1361
1362 /* test for card types, S502A, S502E, S507, S508 */
1363 /* these tests shut down the card completely, so clear the state */
1364 flp->type = SDLA_UNKNOWN;
1365 flp->state = 0;
1366
1367 for(i=1;i<SDLA_IO_EXTENTS;i++)
1368 if (inb(base + i) != 0xFF)
1369 break;
1370
1371 if (i == SDLA_IO_EXTENTS) {
1372 outb(SDLA_HALT, base + SDLA_REG_Z80_CONTROL);
1373 if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x08) {
1374 outb(SDLA_S502E_INTACK, base + SDLA_REG_CONTROL);
1375 if ((inb(base + SDLA_S502_STS) & 0x0F) == 0x0C) {
1376 outb(SDLA_HALT, base + SDLA_REG_CONTROL);
1377 flp->type = SDLA_S502E;
1378 goto got_type;
1379 }
1380 }
1381 }
1382
1383 for(byte=inb(base),i=0;i<SDLA_IO_EXTENTS;i++)
1384 if (inb(base + i) != byte)
1385 break;
1386
1387 if (i == SDLA_IO_EXTENTS) {
1388 outb(SDLA_HALT, base + SDLA_REG_CONTROL);
1389 if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x30) {
1390 outb(SDLA_S507_ENABLE, base + SDLA_REG_CONTROL);
1391 if ((inb(base + SDLA_S502_STS) & 0x7E) == 0x32) {
1392 outb(SDLA_HALT, base + SDLA_REG_CONTROL);
1393 flp->type = SDLA_S507;
1394 goto got_type;
1395 }
1396 }
1397 }
1398
1399 outb(SDLA_HALT, base + SDLA_REG_CONTROL);
1400 if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x00) {
1401 outb(SDLA_S508_INTEN, base + SDLA_REG_CONTROL);
1402 if ((inb(base + SDLA_S508_STS) & 0x3F) == 0x10) {
1403 outb(SDLA_HALT, base + SDLA_REG_CONTROL);
1404 flp->type = SDLA_S508;
1405 goto got_type;
1406 }
1407 }
1408
1409 outb(SDLA_S502A_HALT, base + SDLA_REG_CONTROL);
1410 if (inb(base + SDLA_S502_STS) == 0x40) {
1411 outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
1412 if (inb(base + SDLA_S502_STS) == 0x40) {
1413 outb(SDLA_S502A_INTEN, base + SDLA_REG_CONTROL);
1414 if (inb(base + SDLA_S502_STS) == 0x44) {
1415 outb(SDLA_S502A_START, base + SDLA_REG_CONTROL);
1416 flp->type = SDLA_S502A;
1417 goto got_type;
1418 }
1419 }
1420 }
1421
1422 netdev_notice(dev, "Unknown card type\n");
1423 err = -ENODEV;
1424 goto fail;
1425
1426 got_type:
1427 switch(base) {
1428 case 0x270:
1429 case 0x280:
1430 case 0x380:
1431 case 0x390:
1432 if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
1433 goto fail;
1434 }
1435
1436 switch (map->irq) {
1437 case 2:
1438 if (flp->type != SDLA_S502E)
1439 goto fail;
1440 break;
1441
1442 case 10:
1443 case 11:
1444 case 12:
1445 case 15:
1446 case 4:
1447 if (flp->type != SDLA_S508 && flp->type != SDLA_S507)
1448 goto fail;
1449 break;
1450 case 3:
1451 case 5:
1452 case 7:
1453 if (flp->type == SDLA_S502A)
1454 goto fail;
1455 break;
1456
1457 default:
1458 goto fail;
1459 }
1460
1461 err = -EAGAIN;
1462 if (request_irq(dev->irq, sdla_isr, 0, dev->name, dev))
1463 goto fail;
1464
1465 if (flp->type == SDLA_S507) {
1466 switch(dev->irq) {
1467 case 3:
1468 flp->state = SDLA_S507_IRQ3;
1469 break;
1470 case 4:
1471 flp->state = SDLA_S507_IRQ4;
1472 break;
1473 case 5:
1474 flp->state = SDLA_S507_IRQ5;
1475 break;
1476 case 7:
1477 flp->state = SDLA_S507_IRQ7;
1478 break;
1479 case 10:
1480 flp->state = SDLA_S507_IRQ10;
1481 break;
1482 case 11:
1483 flp->state = SDLA_S507_IRQ11;
1484 break;
1485 case 12:
1486 flp->state = SDLA_S507_IRQ12;
1487 break;
1488 case 15:
1489 flp->state = SDLA_S507_IRQ15;
1490 break;
1491 }
1492 }
1493
1494 for(i=0; i < ARRAY_SIZE(valid_mem); i++)
1495 if (valid_mem[i] == map->mem_start)
1496 break;
1497
1498 err = -EINVAL;
1499 if (i == ARRAY_SIZE(valid_mem))
1500 goto fail2;
1501
1502 if (flp->type == SDLA_S502A && (map->mem_start & 0xF000) >> 12 == 0x0E)
1503 goto fail2;
1504
1505 if (flp->type != SDLA_S507 && map->mem_start >> 16 == 0x0B)
1506 goto fail2;
1507
1508 if (flp->type == SDLA_S507 && map->mem_start >> 16 == 0x0D)
1509 goto fail2;
1510
1511 byte = flp->type != SDLA_S508 ? SDLA_8K_WINDOW : 0;
1512 byte |= (map->mem_start & 0xF000) >> (12 + (flp->type == SDLA_S508 ? 1 : 0));
1513 switch(flp->type) {
1514 case SDLA_S502A:
1515 case SDLA_S502E:
1516 switch (map->mem_start >> 16) {
1517 case 0x0A:
1518 byte |= SDLA_S502_SEG_A;
1519 break;
1520 case 0x0C:
1521 byte |= SDLA_S502_SEG_C;
1522 break;
1523 case 0x0D:
1524 byte |= SDLA_S502_SEG_D;
1525 break;
1526 case 0x0E:
1527 byte |= SDLA_S502_SEG_E;
1528 break;
1529 }
1530 break;
1531 case SDLA_S507:
1532 switch (map->mem_start >> 16) {
1533 case 0x0A:
1534 byte |= SDLA_S507_SEG_A;
1535 break;
1536 case 0x0B:
1537 byte |= SDLA_S507_SEG_B;
1538 break;
1539 case 0x0C:
1540 byte |= SDLA_S507_SEG_C;
1541 break;
1542 case 0x0E:
1543 byte |= SDLA_S507_SEG_E;
1544 break;
1545 }
1546 break;
1547 case SDLA_S508:
1548 switch (map->mem_start >> 16) {
1549 case 0x0A:
1550 byte |= SDLA_S508_SEG_A;
1551 break;
1552 case 0x0C:
1553 byte |= SDLA_S508_SEG_C;
1554 break;
1555 case 0x0D:
1556 byte |= SDLA_S508_SEG_D;
1557 break;
1558 case 0x0E:
1559 byte |= SDLA_S508_SEG_E;
1560 break;
1561 }
1562 break;
1563 }
1564
1565 /* set the memory bits, and enable access */
1566 outb(byte, base + SDLA_REG_PC_WINDOW);
1567
1568 switch(flp->type)
1569 {
1570 case SDLA_S502E:
1571 flp->state = SDLA_S502E_ENABLE;
1572 break;
1573 case SDLA_S507:
1574 flp->state |= SDLA_MEMEN;
1575 break;
1576 case SDLA_S508:
1577 flp->state = SDLA_MEMEN;
1578 break;
1579 }
1580 outb(flp->state, base + SDLA_REG_CONTROL);
1581
1582 dev->irq = map->irq;
1583 dev->base_addr = base;
1584 dev->mem_start = map->mem_start;
1585 dev->mem_end = dev->mem_start + 0x2000;
1586 flp->initialized = 1;
1587 return 0;
1588
1589 fail2:
1590 free_irq(map->irq, dev);
1591 fail:
1592 release_region(base, SDLA_IO_EXTENTS);
1593 return err;
1594 }
1595
1596 static const struct net_device_ops sdla_netdev_ops = {
1597 .ndo_open = sdla_open,
1598 .ndo_stop = sdla_close,
1599 .ndo_do_ioctl = sdla_ioctl,
1600 .ndo_set_config = sdla_set_config,
1601 .ndo_start_xmit = sdla_transmit,
1602 .ndo_change_mtu = sdla_change_mtu,
1603 };
1604
setup_sdla(struct net_device * dev)1605 static void setup_sdla(struct net_device *dev)
1606 {
1607 struct frad_local *flp = netdev_priv(dev);
1608
1609 netdev_boot_setup_check(dev);
1610
1611 dev->netdev_ops = &sdla_netdev_ops;
1612 dev->flags = 0;
1613 dev->type = 0xFFFF;
1614 dev->hard_header_len = 0;
1615 dev->addr_len = 0;
1616 dev->mtu = SDLA_MAX_MTU;
1617
1618 flp->activate = sdla_activate;
1619 flp->deactivate = sdla_deactivate;
1620 flp->assoc = sdla_assoc;
1621 flp->deassoc = sdla_deassoc;
1622 flp->dlci_conf = sdla_dlci_conf;
1623
1624 init_timer(&flp->timer);
1625 flp->timer.expires = 1;
1626 flp->timer.data = (unsigned long) dev;
1627 flp->timer.function = sdla_poll;
1628 }
1629
1630 static struct net_device *sdla;
1631
init_sdla(void)1632 static int __init init_sdla(void)
1633 {
1634 int err;
1635
1636 printk("%s.\n", version);
1637
1638 sdla = alloc_netdev(sizeof(struct frad_local), "sdla0", setup_sdla);
1639 if (!sdla)
1640 return -ENOMEM;
1641
1642 err = register_netdev(sdla);
1643 if (err)
1644 free_netdev(sdla);
1645
1646 return err;
1647 }
1648
exit_sdla(void)1649 static void __exit exit_sdla(void)
1650 {
1651 struct frad_local *flp = netdev_priv(sdla);
1652
1653 unregister_netdev(sdla);
1654 if (flp->initialized) {
1655 free_irq(sdla->irq, sdla);
1656 release_region(sdla->base_addr, SDLA_IO_EXTENTS);
1657 }
1658 del_timer_sync(&flp->timer);
1659 free_netdev(sdla);
1660 }
1661
1662 MODULE_LICENSE("GPL");
1663
1664 module_init(init_sdla);
1665 module_exit(exit_sdla);
1666