1 /*****************************************************************************
2 * *
3 * File: espi.c *
4 * $Revision: 1.14 $ *
5 * $Date: 2005/05/14 00:59:32 $ *
6 * Description: *
7 * Ethernet SPI functionality. *
8 * part of the Chelsio 10Gb Ethernet Driver. *
9 * *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License, version 2, as *
12 * published by the Free Software Foundation. *
13 * *
14 * You should have received a copy of the GNU General Public License along *
15 * with this program; if not, write to the Free Software Foundation, Inc., *
16 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
17 * *
18 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED *
19 * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF *
20 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. *
21 * *
22 * http://www.chelsio.com *
23 * *
24 * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. *
25 * All rights reserved. *
26 * *
27 * Maintainers: maintainers@chelsio.com *
28 * *
29 * Authors: Dimitrios Michailidis <dm@chelsio.com> *
30 * Tina Yang <tainay@chelsio.com> *
31 * Felix Marti <felix@chelsio.com> *
32 * Scott Bardone <sbardone@chelsio.com> *
33 * Kurt Ottaway <kottaway@chelsio.com> *
34 * Frank DiMambro <frank@chelsio.com> *
35 * *
36 * History: *
37 * *
38 ****************************************************************************/
39
40 #include "common.h"
41 #include "regs.h"
42 #include "espi.h"
43
44 struct peespi {
45 adapter_t *adapter;
46 struct espi_intr_counts intr_cnt;
47 u32 misc_ctrl;
48 spinlock_t lock;
49 };
50
51 #define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \
52 F_RAMPARITYERR | F_DIP2PARITYERR)
53 #define MON_MASK (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \
54 | F_MONITORED_INTERFACE)
55
56 #define TRICN_CNFG 14
57 #define TRICN_CMD_READ 0x11
58 #define TRICN_CMD_WRITE 0x21
59 #define TRICN_CMD_ATTEMPTS 10
60
tricn_write(adapter_t * adapter,int bundle_addr,int module_addr,int ch_addr,int reg_offset,u32 wr_data)61 static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
62 int ch_addr, int reg_offset, u32 wr_data)
63 {
64 int busy, attempts = TRICN_CMD_ATTEMPTS;
65
66 writel(V_WRITE_DATA(wr_data) |
67 V_REGISTER_OFFSET(reg_offset) |
68 V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
69 V_BUNDLE_ADDR(bundle_addr) |
70 V_SPI4_COMMAND(TRICN_CMD_WRITE),
71 adapter->regs + A_ESPI_CMD_ADDR);
72 writel(0, adapter->regs + A_ESPI_GOSTAT);
73
74 do {
75 busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
76 } while (busy && --attempts);
77
78 if (busy)
79 pr_err("%s: TRICN write timed out\n", adapter->name);
80
81 return busy;
82 }
83
tricn_init(adapter_t * adapter)84 static int tricn_init(adapter_t *adapter)
85 {
86 int i, sme = 1;
87
88 if (!(readl(adapter->regs + A_ESPI_RX_RESET) & F_RX_CLK_STATUS)) {
89 pr_err("%s: ESPI clock not ready\n", adapter->name);
90 return -1;
91 }
92
93 writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET);
94
95 if (sme) {
96 tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
97 tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
98 tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
99 }
100 for (i = 1; i <= 8; i++)
101 tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
102 for (i = 1; i <= 2; i++)
103 tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
104 for (i = 1; i <= 3; i++)
105 tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
106 tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1);
107 tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1);
108 tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1);
109 tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80);
110 tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1);
111
112 writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST,
113 adapter->regs + A_ESPI_RX_RESET);
114
115 return 0;
116 }
117
t1_espi_intr_enable(struct peespi * espi)118 void t1_espi_intr_enable(struct peespi *espi)
119 {
120 u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
121
122 /*
123 * Cannot enable ESPI interrupts on T1B because HW asserts the
124 * interrupt incorrectly, namely the driver gets ESPI interrupts
125 * but no data is actually dropped (can verify this reading the ESPI
126 * drop registers). Also, once the ESPI interrupt is asserted it
127 * cannot be cleared (HW bug).
128 */
129 enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
130 writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
131 writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
132 }
133
t1_espi_intr_clear(struct peespi * espi)134 void t1_espi_intr_clear(struct peespi *espi)
135 {
136 readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
137 writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
138 writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
139 }
140
t1_espi_intr_disable(struct peespi * espi)141 void t1_espi_intr_disable(struct peespi *espi)
142 {
143 u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
144
145 writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
146 writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
147 }
148
t1_espi_intr_handler(struct peespi * espi)149 int t1_espi_intr_handler(struct peespi *espi)
150 {
151 u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
152
153 if (status & F_DIP4ERR)
154 espi->intr_cnt.DIP4_err++;
155 if (status & F_RXDROP)
156 espi->intr_cnt.rx_drops++;
157 if (status & F_TXDROP)
158 espi->intr_cnt.tx_drops++;
159 if (status & F_RXOVERFLOW)
160 espi->intr_cnt.rx_ovflw++;
161 if (status & F_RAMPARITYERR)
162 espi->intr_cnt.parity_err++;
163 if (status & F_DIP2PARITYERR) {
164 espi->intr_cnt.DIP2_parity_err++;
165
166 /*
167 * Must read the error count to clear the interrupt
168 * that it causes.
169 */
170 readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
171 }
172
173 /*
174 * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we
175 * write the status as is.
176 */
177 if (status && t1_is_T1B(espi->adapter))
178 status = 1;
179 writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
180 return 0;
181 }
182
t1_espi_get_intr_counts(struct peespi * espi)183 const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
184 {
185 return &espi->intr_cnt;
186 }
187
espi_setup_for_pm3393(adapter_t * adapter)188 static void espi_setup_for_pm3393(adapter_t *adapter)
189 {
190 u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
191
192 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
193 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
194 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
195 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
196 writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
197 writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
198 writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
199 writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
200 writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
201 }
202
espi_setup_for_vsc7321(adapter_t * adapter)203 static void espi_setup_for_vsc7321(adapter_t *adapter)
204 {
205 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
206 writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
207 writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
208 writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
209 writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
210 writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
211 writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG);
212
213 writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
214 }
215
216 /*
217 * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
218 */
espi_setup_for_ixf1010(adapter_t * adapter,int nports)219 static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
220 {
221 writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
222 if (nports == 4) {
223 if (is_T2(adapter)) {
224 writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
225 writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
226 } else {
227 writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
228 writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
229 }
230 } else {
231 writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
232 writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
233 }
234 writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG);
235
236 }
237
t1_espi_init(struct peespi * espi,int mac_type,int nports)238 int t1_espi_init(struct peespi *espi, int mac_type, int nports)
239 {
240 u32 status_enable_extra = 0;
241 adapter_t *adapter = espi->adapter;
242
243 /* Disable ESPI training. MACs that can handle it enable it below. */
244 writel(0, adapter->regs + A_ESPI_TRAIN);
245
246 if (is_T2(adapter)) {
247 writel(V_OUT_OF_SYNC_COUNT(4) |
248 V_DIP2_PARITY_ERR_THRES(3) |
249 V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
250 writel(nports == 4 ? 0x200040 : 0x1000080,
251 adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
252 } else
253 writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
254
255 if (mac_type == CHBT_MAC_PM3393)
256 espi_setup_for_pm3393(adapter);
257 else if (mac_type == CHBT_MAC_VSC7321)
258 espi_setup_for_vsc7321(adapter);
259 else if (mac_type == CHBT_MAC_IXF1010) {
260 status_enable_extra = F_INTEL1010MODE;
261 espi_setup_for_ixf1010(adapter, nports);
262 } else
263 return -1;
264
265 writel(status_enable_extra | F_RXSTATUSENABLE,
266 adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
267
268 if (is_T2(adapter)) {
269 tricn_init(adapter);
270 /*
271 * Always position the control at the 1st port egress IN
272 * (sop,eop) counter to reduce PIOs for T/N210 workaround.
273 */
274 espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL);
275 espi->misc_ctrl &= ~MON_MASK;
276 espi->misc_ctrl |= F_MONITORED_DIRECTION;
277 if (adapter->params.nports == 1)
278 espi->misc_ctrl |= F_MONITORED_INTERFACE;
279 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
280 spin_lock_init(&espi->lock);
281 }
282
283 return 0;
284 }
285
t1_espi_destroy(struct peespi * espi)286 void t1_espi_destroy(struct peespi *espi)
287 {
288 kfree(espi);
289 }
290
t1_espi_create(adapter_t * adapter)291 struct peespi *t1_espi_create(adapter_t *adapter)
292 {
293 struct peespi *espi = kzalloc(sizeof(*espi), GFP_KERNEL);
294
295 if (espi)
296 espi->adapter = adapter;
297 return espi;
298 }
299
300 #if 0
301 void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
302 {
303 struct peespi *espi = adapter->espi;
304
305 if (!is_T2(adapter))
306 return;
307 spin_lock(&espi->lock);
308 espi->misc_ctrl = (val & ~MON_MASK) |
309 (espi->misc_ctrl & MON_MASK);
310 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
311 spin_unlock(&espi->lock);
312 }
313 #endif /* 0 */
314
t1_espi_get_mon(adapter_t * adapter,u32 addr,u8 wait)315 u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
316 {
317 struct peespi *espi = adapter->espi;
318 u32 sel;
319
320 if (!is_T2(adapter))
321 return 0;
322
323 sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
324 if (!wait) {
325 if (!spin_trylock(&espi->lock))
326 return 0;
327 } else
328 spin_lock(&espi->lock);
329
330 if ((sel != (espi->misc_ctrl & MON_MASK))) {
331 writel(((espi->misc_ctrl & ~MON_MASK) | sel),
332 adapter->regs + A_ESPI_MISC_CONTROL);
333 sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
334 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
335 } else
336 sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
337 spin_unlock(&espi->lock);
338 return sel;
339 }
340
341 /*
342 * This function is for T204 only.
343 * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
344 * one shot, since there is no per port counter on the out side.
345 */
t1_espi_get_mon_t204(adapter_t * adapter,u32 * valp,u8 wait)346 int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
347 {
348 struct peespi *espi = adapter->espi;
349 u8 i, nport = (u8)adapter->params.nports;
350
351 if (!wait) {
352 if (!spin_trylock(&espi->lock))
353 return -1;
354 } else
355 spin_lock(&espi->lock);
356
357 if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) {
358 espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
359 F_MONITORED_DIRECTION;
360 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
361 }
362 for (i = 0 ; i < nport; i++, valp++) {
363 if (i) {
364 writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
365 adapter->regs + A_ESPI_MISC_CONTROL);
366 }
367 *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
368 }
369
370 writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
371 spin_unlock(&espi->lock);
372 return 0;
373 }
374