1 /* $Id: act2000_isa.h,v 1.4.6.1 2001/09/23 22:24:32 kai Exp $
2  *
3  * ISDN lowlevel-module for the IBM ISDN-S0 Active 2000 (ISA-Version).
4  *
5  * Author       Fritz Elfert
6  * Copyright    by Fritz Elfert      <fritz@isdn4linux.de>
7  *
8  * This software may be used and distributed according to the terms
9  * of the GNU General Public License, incorporated herein by reference.
10  *
11  * Thanks to Friedemann Baitinger and IBM Germany
12  *
13  */
14 
15 #ifndef act2000_isa_h
16 #define act2000_isa_h
17 
18 #define ISA_POLL_LOOP 40        /* Try to read-write before give up */
19 
20 typedef enum {
21 	INT_NO_CHANGE = 0,      /* Do not change the Mask */
22 	INT_ON = 1,             /* Set to Enable */
23 	INT_OFF = 2,            /* Set to Disable */
24 } ISA_INT_T;
25 
26 /**************************************************************************/
27 /*      Configuration Register COR (RW)                                   */
28 /**************************************************************************/
29 /*    7    |   6    |    5   |   4    |    3   |    2   |    1   |    0   */
30 /* Soft Res|  IRQM  |        IRQ Select        |   N/A  |  WAIT  |Proc err */
31 /**************************************************************************/
32 #define        ISA_COR             0	/* Offset for ISA config register */
33 #define        ISA_COR_PERR     0x01	/* Processor Error Enabled        */
34 #define        ISA_COR_WS       0x02	/* Insert Wait State if 1         */
35 #define        ISA_COR_IRQOFF   0x38	/* No Interrupt                   */
36 #define        ISA_COR_IRQ07    0x30	/* IRQ 7 Enable                   */
37 #define        ISA_COR_IRQ05    0x28	/* IRQ 5 Enable                   */
38 #define        ISA_COR_IRQ03    0x20	/* IRQ 3 Enable                   */
39 #define        ISA_COR_IRQ10    0x18	/* IRQ 10 Enable                  */
40 #define        ISA_COR_IRQ11    0x10	/* IRQ 11 Enable                  */
41 #define        ISA_COR_IRQ12    0x08	/* IRQ 12 Enable                  */
42 #define        ISA_COR_IRQ15    0x00	/* IRQ 15 Enable                  */
43 #define        ISA_COR_IRQPULSE 0x40	/* 0 = Level 1 = Pulse Interrupt  */
44 #define        ISA_COR_RESET    0x80	/* Soft Reset for Transputer      */
45 
46 /**************************************************************************/
47 /*      Interrupt Source Register ISR (RO)                                */
48 /**************************************************************************/
49 /*    7    |   6    |    5   |   4    |    3   |    2   |    1   |    0   */
50 /*   N/A   |  N/A   |   N/A  |Err sig |Ser ID  |IN Intr |Out Intr| Error  */
51 /**************************************************************************/
52 #define        ISA_ISR             1	/* Offset for Interrupt Register  */
53 #define        ISA_ISR_ERR      0x01	/* Error Interrupt                */
54 #define        ISA_ISR_OUT      0x02	/* Output Interrupt               */
55 #define        ISA_ISR_INP      0x04	/* Input Interrupt                */
56 #define        ISA_ISR_SERIAL   0x08	/* Read out Serial ID after Reset */
57 #define        ISA_ISR_ERRSIG   0x10	/* Error Signal Input             */
58 #define        ISA_ISR_ERR_MASK 0xfe    /* Mask Error Interrupt           */
59 #define        ISA_ISR_OUT_MASK 0xfd    /* Mask Output Interrupt          */
60 #define        ISA_ISR_INP_MASK 0xfb    /* Mask Input Interrupt           */
61 
62 /* Signature delivered after Reset at ISA_ISR_SERIAL (LSB first)          */
63 #define        ISA_SER_ID     0x0201	/* ID for ISA Card                */
64 
65 /**************************************************************************/
66 /*      EEPROM Register EPR (RW)                                          */
67 /**************************************************************************/
68 /*    7    |   6    |    5   |   4    |    3   |    2   |    1   |    0   */
69 /*   N/A   |  N/A   |   N/A  |ROM Hold| ROM CS |ROM CLK | ROM IN |ROM Out */
70 /**************************************************************************/
71 #define        ISA_EPR             2	/* Offset for this Register       */
72 #define        ISA_EPR_OUT      0x01	/* Rome Register Out (RO)         */
73 #define        ISA_EPR_IN       0x02	/* Rom Register In (WR)           */
74 #define        ISA_EPR_CLK      0x04	/* Rom Clock (WR)                 */
75 #define        ISA_EPR_CS       0x08	/* Rom Cip Select (WR)            */
76 #define        ISA_EPR_HOLD     0x10	/* Rom Hold Signal (WR)           */
77 
78 /**************************************************************************/
79 /*      EEPROM enable Register EER (unused)                               */
80 /**************************************************************************/
81 #define        ISA_EER             3	/* Offset for this Register       */
82 
83 /**************************************************************************/
84 /*      SLC Data Input SDI (RO)                                           */
85 /**************************************************************************/
86 #define        ISA_SDI             4	/* Offset for this Register       */
87 
88 /**************************************************************************/
89 /*      SLC Data Output SDO (WO)                                          */
90 /**************************************************************************/
91 #define        ISA_SDO             5	/* Offset for this Register       */
92 
93 /**************************************************************************/
94 /*      IMS C011 Mode 2 Input Status Register for INMOS CPU SIS (RW)      */
95 /**************************************************************************/
96 /*    7    |   6    |    5   |   4    |    3   |    2   |    1   |    0   */
97 /*   N/A   |  N/A   |   N/A  |  N/A   |   N/A  |   N/A  |Int Ena |Data Pre */
98 /**************************************************************************/
99 #define        ISA_SIS             6	/* Offset for this Register       */
100 #define        ISA_SIS_READY    0x01	/* If 1 : data is available       */
101 #define        ISA_SIS_INT      0x02	/* Enable Interrupt for READ      */
102 
103 /**************************************************************************/
104 /*      IMS C011 Mode 2 Output Status Register from INMOS CPU SOS (RW)    */
105 /**************************************************************************/
106 /*    7    |   6    |    5   |   4    |    3   |    2   |    1   |    0   */
107 /*   N/A   |  N/A   |   N/A  |  N/A   |   N/A  |   N/A  |Int Ena |Out Rdy */
108 /**************************************************************************/
109 #define        ISA_SOS             7	/* Offset for this Register       */
110 #define        ISA_SOS_READY    0x01	/* If 1 : we can write Data       */
111 #define        ISA_SOS_INT      0x02	/* Enable Interrupt for WRITE     */
112 
113 #define        ISA_REGION          8	/* Number of Registers            */
114 
115 
116 /* Macros for accessing ports */
117 #define ISA_PORT_COR (card->port + ISA_COR)
118 #define ISA_PORT_ISR (card->port + ISA_ISR)
119 #define ISA_PORT_EPR (card->port + ISA_EPR)
120 #define ISA_PORT_EER (card->port + ISA_EER)
121 #define ISA_PORT_SDI (card->port + ISA_SDI)
122 #define ISA_PORT_SDO (card->port + ISA_SDO)
123 #define ISA_PORT_SIS (card->port + ISA_SIS)
124 #define ISA_PORT_SOS (card->port + ISA_SOS)
125 
126 /* Prototypes */
127 
128 extern int act2000_isa_detect(unsigned short portbase);
129 extern int act2000_isa_config_irq(act2000_card *card, short irq);
130 extern int act2000_isa_config_port(act2000_card *card, unsigned short portbase);
131 extern int act2000_isa_download(act2000_card *card, act2000_ddef __user *cb);
132 extern void act2000_isa_release(act2000_card *card);
133 extern void act2000_isa_receive(act2000_card *card);
134 extern void act2000_isa_send(act2000_card *card);
135 
136 #endif                          /* act2000_isa_h */
137